Mohamed Ayoub
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohamed Ayoub has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed El-Morsy
Tanta Univ, Fac Engn, Publ Works Engn Dept, Tanta, Egypt
5 shared publications - Abd-Elaziz El-Sayed3 shared publications
- Abdallah Abdelfattah
School of Agricultural Engineering, Jiangsu University, Zhenjiang 212013, China; Department of Public Works Engineering, Faculty of Engineering, Tanta University, Tanta 31511, Egypt
2 shared publications Ibrahim Gar Al-Alm Rashed
2 shared publications- Abdelaleem Elwakil1 shared publication
- Ahmed Eid
Cardiothoracic Surgery Department Maadi Military Hospital Cairo, Egypt
1 shared publication
Latest Publications
- Open Access
- 1 September 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 26 (9) , 376-391
Optimization of iron and manganese removal from groundwater using activated carbons derived from waste materials via response surface methodology
Activated carbon derived from cigarette butts (CI-AC), corn cobs (CO-AC), and luffa sponge (LU-AC) was evaluated for adsorbing iron and manganese from aqueous solutions. Each material was carbonized at 300℃ for 2 hours, followed by chemical activation with HCl (carbonaceous material/HCl ratio...
- 1 September 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 26 (9) , 376-391
Open AccessOptimization of iron and manganese removal from groundwater using activated carbons derived from waste materials via response surface methodology
Activated carbon derived from cigarette butts (CI-AC), corn cobs (CO-AC), and luffa sponge (LU-AC) was evaluated for adsorbing iron and manganese from aqueous solutions. Each material was carbonized at 300℃ for 2 hours, followed by chemical activation with HCl (carbonaceous material/HCl ratio...
- Open Access
- 1 December 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 25 (12) , 203-217
Efficiency Evaluation of the Continuous Flow Electrocoagulation Process for the Treatment of Oily-Contaminated Wastewater
Wastewater generated by edible oil industries is characterized by elevated levels of Chemical Oxygen Demand (COD), oils, and grease (O&G), which poses significant challenges for treatment to comply with environmental standards. This study aims to assess the effectiveness of continuous flow...
- 1 December 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 25 (12) , 203-217
Open AccessEfficiency Evaluation of the Continuous Flow Electrocoagulation Process for the Treatment of Oily-Contaminated Wastewater
Wastewater generated by edible oil industries is characterized by elevated levels of Chemical Oxygen Demand (COD), oils, and grease (O&G), which poses significant challenges for treatment to comply with environmental standards. This study aims to assess the effectiveness of continuous flow...
- Open Access
- 1 February 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 25 (2) , 218-229
Optimizing the MBBR System and Integrating Nanoparticles to Improve Wastewater Treatment Efficiency
Wastewater treatment faces a growing challenge in removing nutrients and organic matter. This study aims to evaluate the effectiveness of the moving bed biofilm reactor (MBBR) system in removing nutrients and organic from municipal wastewater. The impact of different carrier filling ratios and...
- 1 February 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 25 (2) , 218-229
Open AccessOptimizing the MBBR System and Integrating Nanoparticles to Improve Wastewater Treatment Efficiency
Wastewater treatment faces a growing challenge in removing nutrients and organic matter. This study aims to evaluate the effectiveness of the moving bed biofilm reactor (MBBR) system in removing nutrients and organic from municipal wastewater. The impact of different carrier filling ratios and...
- Open Access
- 1 June 2023
- Published by IWA Publishing in Water Practice & Technology
- Vol. 18 (6) , 1389-1403
Using a compact unit for nitrification and denitrification processes followed by activated carbon filtration to remove total nitrogen from ammonium-contaminated groundwater
The current study aims to evaluate the removal of ammonium-nitrogen (NH4+-N), generated nitrite (NH2−-N), and nitrate (NH3−-N) from groundwater using a compact unit for nitrification and denitrification processes that consist of a dripping nitrification reactor followed by a denitrification biofilter filled with treated cotton. Moreover, activated carbon filtration was applied as a post-treatment technique to remove the released total organic carbon (TOC) after the denitrification biofilter. The raw groundwater had an average NH4+-N concentration of 29.8 mg/L. To complete the analytical measurements, samples were taken from the compact unit's inlet, outlet, and sampling points for nitrification and denitrification, as well as the activated carbon filter. The obtained results indicated that the nitrification efficiency reached 98.81%, while the denitrification efficiency reached 95.98%. Moreover, the removal rate of total nitrogen ranged between 122.5 and 147 mg/d. On the other hand, the denitrification process utilizing cotton media resulted in a considerable increase in the outlet TOC concentrations, which ranged from 52.1 to 74.2 mg/L. The activated carbon filtration was applied to vanish the released TOC from the denitrification process after 10 days of operation.
- 1 June 2023
- Published by IWA Publishing in Water Practice & Technology
- Vol. 18 (6) , 1389-1403
Open AccessUsing a compact unit for nitrification and denitrification processes followed by activated carbon filtration to remove total nitrogen from ammonium-contaminated groundwater
The current study aims to evaluate the removal of ammonium-nitrogen (NH4+-N), generated nitrite (NH2−-N), and nitrate (NH3−-N) from groundwater using a compact unit for nitrification and denitrification processes that consist of a dripping nitrification reactor followed by a denitrification biofilter filled with treated cotton. Moreover, activated carbon filtration was applied as a post-treatment technique to remove the released total organic carbon (TOC) after the denitrification biofilter. The raw groundwater had an average NH4+-N concentration of 29.8 mg/L. To complete the analytical measurements, samples were taken from the compact unit's inlet, outlet, and sampling points for nitrification and denitrification, as well as the activated carbon filter. The obtained results indicated that the nitrification efficiency reached 98.81%, while the denitrification efficiency reached 95.98%. Moreover, the removal rate of total nitrogen ranged between 122.5 and 147 mg/d. On the other hand, the denitrification process utilizing cotton media resulted in a considerable increase in the outlet TOC concentrations, which ranged from 52.1 to 74.2 mg/L. The activated carbon filtration was applied to vanish the released TOC from the denitrification process after 10 days of operation.
- Open Access
- 1 March 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 24 (3) , 304-314
Alternating Aerobic and Anoxic Conditions to Eliminate Sludge Accumulation in the Oxidation Ditch System
The purpose of the present study is to investigate the performance of an upgraded oxidation ditch (OD) system, which was designed and implemented to solve the problem of sludge accumulation at the bottom as well as to get the best removal efficiency of total nitrogen (TN). The upgrading concept...
- 1 March 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 24 (3) , 304-314
Open AccessAlternating Aerobic and Anoxic Conditions to Eliminate Sludge Accumulation in the Oxidation Ditch System
The purpose of the present study is to investigate the performance of an upgraded oxidation ditch (OD) system, which was designed and implemented to solve the problem of sludge accumulation at the bottom as well as to get the best removal efficiency of total nitrogen (TN). The upgrading concept...
- 21 January 2023
- Published by Wiley in Water and Environment Journal
- Vol. 37 (2) , 359-367
Performance evaluation of an oily industrial wastewater treatment system using the application of activated sludge model No. 3
The purpose of the present study was to adapt the activated sludge model No. 3 (ASM3) to the characteristics of oily industrial wastewater, determining the utmost significant and appropriate kinetic as well as stoichiometric parameters. An oily industrial wastewater treatment system was simulated to assess ASM3 validation and perform sensitivity analysis using the STOAT program. The obtained results revealed that the ASM3 model, which was calibrated after adding the Arrhenius equation into consideration, provided strong correlations with the analytical results of chemical oxygen demand (COD), total suspended solids (TSS), mixed liquor volatile suspended solids (MLVSS) and total suspended solids in the return activated sludge flow (TSS in RAS) concentrations. The values of modelled effluent COD and TSS are very close to those corresponding real values of the treated wastewater by a difference of between 0.5% and 1.5%. Thus, this model becomes successful in representing oily industrial wastewater treatment as a new trend added to the traditional modelling of sewage treatment.
- 21 January 2023
- Published by Wiley in Water and Environment Journal
- Vol. 37 (2) , 359-367
Performance evaluation of an oily industrial wastewater treatment system using the application of activated sludge model No. 3
The purpose of the present study was to adapt the activated sludge model No. 3 (ASM3) to the characteristics of oily industrial wastewater, determining the utmost significant and appropriate kinetic as well as stoichiometric parameters. An oily industrial wastewater treatment system was simulated to assess ASM3 validation and perform sensitivity analysis using the STOAT program. The obtained results revealed that the ASM3 model, which was calibrated after adding the Arrhenius equation into consideration, provided strong correlations with the analytical results of chemical oxygen demand (COD), total suspended solids (TSS), mixed liquor volatile suspended solids (MLVSS) and total suspended solids in the return activated sludge flow (TSS in RAS) concentrations. The values of modelled effluent COD and TSS are very close to those corresponding real values of the treated wastewater by a difference of between 0.5% and 1.5%. Thus, this model becomes successful in representing oily industrial wastewater treatment as a new trend added to the traditional modelling of sewage treatment.
- Open Access
- 5 September 2022
- Published by IWA Publishing in Water Science & Technology
- Vol. 86 (6) , 1388-1401
Fenton process for the treatment of wastewater effluent from the edible oil industry
The present study intends to investigate the performance of the Fenton reaction as one of the most efficient (AOPs) in a batch mode for treating wastewater effluent from the edible oil industry, as well as the parameters that influence the reaction, such as pH, hydrogen peroxide (H2O2), and ferrous sulfate heptahydrate (FeSO4.7H2O) doses at various reaction times. The response surface methodology (RSM) was applied with a central composite design (CCD) for optimizing the responses of pollutant removals. The obtained results indicated that the authenticated response to the chemical oxygen demand (COD) removal was 93.52%, at optimum values of pH, FeSO4.7H2O dose, H2O2 dose, and reaction time of 3, 1 g/L, 8.38 g/L, and 50 min, respectively. Furthermore, the authenticated response to oil and grease (O&G) removal was 99.8%, at optimum values of pH, FeSO4.7H2O dose, H2O2 dose, and reaction time of 3, 0.71 g/L, 8.7 g/L, and 37.4 min, respectively. Under these conditions, the residual COD and O&G after Fenton oxidation become 155.4 mg/L and 10 mg/L, respectively.
- 5 September 2022
- Published by IWA Publishing in Water Science & Technology
- Vol. 86 (6) , 1388-1401
Open AccessFenton process for the treatment of wastewater effluent from the edible oil industry
The present study intends to investigate the performance of the Fenton reaction as one of the most efficient (AOPs) in a batch mode for treating wastewater effluent from the edible oil industry, as well as the parameters that influence the reaction, such as pH, hydrogen peroxide (H2O2), and ferrous sulfate heptahydrate (FeSO4.7H2O) doses at various reaction times. The response surface methodology (RSM) was applied with a central composite design (CCD) for optimizing the responses of pollutant removals. The obtained results indicated that the authenticated response to the chemical oxygen demand (COD) removal was 93.52%, at optimum values of pH, FeSO4.7H2O dose, H2O2 dose, and reaction time of 3, 1 g/L, 8.38 g/L, and 50 min, respectively. Furthermore, the authenticated response to oil and grease (O&G) removal was 99.8%, at optimum values of pH, FeSO4.7H2O dose, H2O2 dose, and reaction time of 3, 0.71 g/L, 8.7 g/L, and 37.4 min, respectively. Under these conditions, the residual COD and O&G after Fenton oxidation become 155.4 mg/L and 10 mg/L, respectively.
- Open Access
- 19 October 2021
- Published by IWA Publishing in Water Practice & Technology
- Vol. 17 (1) , 246-253
Degradation of tetracycline using nanoparticles of zero-valent iron and copper
Tetracycline (TC) is one of the most persistent pharmaceuticals in the ecosystem. Advanced oxidation processes (AOPs) are suitable and effective technology for treating wastewater contaminated with antibiotics such as TC. In this manner, Fenton-like reaction is effective for wastewater treatment from toxicity and non-biodegradable organic pollutants using bimetallic nanoparticles. This study aims to verify the effect of AOPs using ZVI/Cu bimetallic nanoparticles on removing the TC antibiotic via a Fenton-like reaction, and what is necessary to evaluate the factors that influence the reaction, i.e. pH, ZVI/Cu dose, stirring intensity, H2O2 concentration, and initial TC dosage. The obtained results indicated that the TC removal reached up to 82.3% with an initial TC dose of 8 μg/L. In addition, the TC degradation process is more effective in an acidic medium than in an alkaline medium. Furthermore, the TC removal reached up to 85.1% with a ZVI/Cu dose of 1.2 g/L. On the other hand, the optimum mixing intensity value was 200 rpm, and the optimum H2O2 dose was 2 g/L according to the conditions of the present study.
- 19 October 2021
- Published by IWA Publishing in Water Practice & Technology
- Vol. 17 (1) , 246-253
Open AccessDegradation of tetracycline using nanoparticles of zero-valent iron and copper
Tetracycline (TC) is one of the most persistent pharmaceuticals in the ecosystem. Advanced oxidation processes (AOPs) are suitable and effective technology for treating wastewater contaminated with antibiotics such as TC. In this manner, Fenton-like reaction is effective for wastewater treatment from toxicity and non-biodegradable organic pollutants using bimetallic nanoparticles. This study aims to verify the effect of AOPs using ZVI/Cu bimetallic nanoparticles on removing the TC antibiotic via a Fenton-like reaction, and what is necessary to evaluate the factors that influence the reaction, i.e. pH, ZVI/Cu dose, stirring intensity, H2O2 concentration, and initial TC dosage. The obtained results indicated that the TC removal reached up to 82.3% with an initial TC dose of 8 μg/L. In addition, the TC degradation process is more effective in an acidic medium than in an alkaline medium. Furthermore, the TC removal reached up to 85.1% with a ZVI/Cu dose of 1.2 g/L. On the other hand, the optimum mixing intensity value was 200 rpm, and the optimum H2O2 dose was 2 g/L according to the conditions of the present study.
- Open Access
- 1 February 2021
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 22 (2) , 128-133
Applying the Wastewater Quality Index for Assessing the Effluent Quality of Recently Upgraded Meet Abo El-koum Wastewater Treatment Plant
The wastewater quality index (WWQI) can be defined as a single value, which reflects the overall wastewater quality related to its input constituent parameters. The major objective of the present study was to investigate the suitability of the effluent quality from Meet Abo El-koum wastewater...
- 1 February 2021
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 22 (2) , 128-133
Open AccessApplying the Wastewater Quality Index for Assessing the Effluent Quality of Recently Upgraded Meet Abo El-koum Wastewater Treatment Plant
The wastewater quality index (WWQI) can be defined as a single value, which reflects the overall wastewater quality related to its input constituent parameters. The major objective of the present study was to investigate the suitability of the effluent quality from Meet Abo El-koum wastewater...
- 1 October 2017
- Published by Elsevier in Journal of Water Process Engineering
- Vol. 19, 133-138
Chemically enhanced primary treatment of sewage using the recovered alum from water treatment sludge in a model of hydraulic clari-flocculator
- 1 October 2017
- Published by Elsevier in Journal of Water Process Engineering
- Vol. 19, 133-138
Chemically enhanced primary treatment of sewage using the recovered alum from water treatment sludge in a model of hydraulic clari-flocculator