Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Craig Lawson has a total of 73 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of Airport Noise Reduction Procedures during Take-Off for Supersonic Civil Transport

    by Cristina Villena Muñoz, Craig P. Lawson, Atif Riaz

    The assessment of noise in the airport environment and the implementation of techniques to minimise take-off noise are of crucial interest given their environmental and societal impacts. Despite progress in reducing aircraft noise through technological advancements, the forthcoming generation of civil supersonic aircraft still faces significant challenges associated with take-off noise. This research focuses on the development of a noise mitigation approach based on a variable noise reduction system implementing a Programmed Lapse Rate (PLR) procedure to reduce noise in the airport environment. The primary goal is to assess the technical viability of developing an environmentally compliant supersonic transport aircraft while providing informed recommendations for future supersonic regulatory frameworks. The noise assessment methods and departure procedures are applied to the initial conceptual design iteration of the Mach 1.8 supersonic airliner developed within the EU Horizon 2020 SENECA project. Predicted noise levels are evaluated against current ICAO noise standards to investigate their applicability to future supersonic aircraft and inform future certification requirements. The PLR take-off profile achieving the lowest combined noise levels provides reductions of 3.83 dB at the sideline measurement point and 2.43 EPNdB at the flyover measurement point. The noise prediction model is validated using Aircraft Noise and Performance database data for Concorde and several subsonic commercial aircraft, demonstrating maximum deviations of 2.23% for sideline and 2.19% for flyover noise. Although not permitted under current subsonic noise standards, PLR represents a promising noise reduction strategy that should be considered in the development of future supersonic aircraft certification frameworks.

  • Open Access

    Pump Health Monitoring Test Environment for Diagnosing the Erosive Effects from Cavitation

    by Tedja Verhulst, David Judt, Craig Lawson, Osama Al-Tayawe, Geoff Ward, Yongmann Chung

    Cavitation occurs frequently in pumps. The subsequent erosion that is caused by cavitation can significantly reduce the operational efficiency and Remaining Useful Life (RUL) of the pump. This study describes a new hybrid Health Monitoring (HM) test environment, used to diagnose permanent damage caused by cavitation erosion in a two-stage centrifugal pump. Flowrate, pressure and motor current measurements are made and compared to Computational Fluid Dynamic (CFD) results. The hybrid-based HM carried out using the three methods provide the facility to develop diagnostics for cavitation erosion damage. The suggested methods will not only aid in HM development, but also select the best operating conditions to carry it out. The Gray Level Method (GLM) is implemented using CFD to predict the erosion areas in the centrifugal pump. A Simscape model is devised to enable development of health monitoring algorithms. Few works have attempted to detect for erosion caused by cavitation. It was found that a high-level agreement was achieved between the Simscape, CFD and test-rig results, with an average error of 0.8%, 2.5%, and 2.0% for current, pressure and flow measurements respectively. The results from this research show the feasibility of developing HM algorithms to detect cavitation erosion in aircraft fuel pumps by fusing model and data-based methods. This is an enabler for a move from time-based to condition-based maintenance, thus reducing aircraft operating costs.

  • Open Access

    Review of Sonic Boom Prediction and Reduction Methods for Next Generation of Supersonic Aircraft

    by Giordana Bonavolontà, Craig Lawson, Atif Riaz

    The reduction of sonic boom levels is the main challenge but also the key factor to start a new era of supersonic commercial flights. Since 1970, a FAA regulation has banned supersonic flights overland for unacceptable sonic booms at the ground, and many research studies have been carried out from that date to understand sonic boom generation, propagation and effects, both on the environment and communities. Minimization techniques have also been developed with the attempt to reduce sonic boom annoyance to acceptable levels. In the last 20 years, the advances in both knowledge and technologies, and companies and institutions’ significant investments have again raised the interest in the development of new methods and tools for the design of low boom supersonic aircraft. The exploration of unconventional configurations and exotic solutions and systems seems to be needed to effectively reduce sonic boom and allow supersonic flight everywhere. This review provides a description of all aspects of the sonic boom phenomenon related to the design of the next generation of supersonic aircraft. In particular, a critical review of the prediction and minimization methods found in the literature, aimed at identifying their strengths, limitations and gaps, is made, along with a complete overview of disruptive unconventional aircraft configurations and exotic active/passive solutions to boom level reduction. The aim of the work is to give a clear statement of state-of-the-art sonic boom prediction methods and possible reduction solutions to be explored for the design of next low-boom supersonic aircraft.


  • Open Access

    A Generic Mission-Level Flight Control Surface EMA Power Consumption Simulation Tool

    by Jingcheng Fu, Albert S. J. van Heerden, David Judt, Craig Lawson

    The use of electromechanical actuators (EMAs) for aeronautical applications promises substantial benefits regarding efficiency and operability. To advance the design of power electronics and secondary power supply, there is a need for the ability to swiftly study the effects of aircraft mission and operational aspects on the actuator energy consumption. Pursuant to this, the aim of the work presented in this paper is twofold: (i) to build a generic mission-level flight control surface EMA power consumption simulation framework and (ii) to apply this framework to a case study involving a small all-electric aircraft, in which selected factors that impact energy consumption are investigated. The core of the framework comprises physics-based EMA power estimators, linked with a six-degree-of-freedom flight dynamics and control simulation module. The case study results show that the actuator power consumption correlates positively with the proportional gains in the flight control system but is inversely proportional to the trajectory radius and linearly dependent on turbulence intensity. The developed framework could aid in the selection of the actuator, as well as in the optimisation of airborne electronics and secondary power supply.


  • Review for State-of-the-Art Health Monitoring Technologies on Airframe Fuel Pumps

    by Tedja Verhulst, David Judt, Craig Lawson, Yongmann Chung, Osama Al-Tayawe, Geoff Ward

    Aircraft maintenance is an essential cost borne by the airline. Improving maintenance practices for day-to-day operations can lead to significant financial savings. The benefits of effective maintenance are derived from the avoided costs caused by unexpected breakdowns and from maximising aircraft flight time transporting passengers. The fuel system is a crucial part of the entire aircraft as it ensures delivery of the fuel to the engine and a key component within this system are the fuel pumps. These airborne fuel pumps are classified between the pumps installed in the airframe fuel system and in the engine fuel system. Past works have investigated the performance characteristics of these pumps during flight, however there are no reviews related to the present Health Monitoring (HM) capabilities under flight conditions. HM refers to the field of diagnosing faults or predicting the remaining useful life (RUL) of the pump and the focus of this review is to highlight the HM technologies suitable for aircraft fuel pumps. This is done by first reviewing the technologies and concepts related to HM of fuel pumps. Second a literature review is carried out on pump and motor faults is carried out, drawing on examples from aerospace and other relevant industries. Section 6: Conclusion, discusses the HM technologies have been applied to aerospace fuel pumps and highlights the gaps in capabilities, based on the findings of the literature review carried out in Section 4: Common Faults and Section 5: HM Sensing Methods to suggest future developments in this field. It was found that there is a large scope for development for the HM airframe fuel pumps, based on reviewing the present state of the art. Furthermore, there are no clear strategies formulated by airframe manufacturers and equipment suppliers to test and implement existing HM solutions to operate under flight conditions. This highlights the need to develop HM in this field and a requirement for further research to allow this technology to be a part of routine aircraft


  • Open Access

    Framework for integrated dynamic thermal simulation of future civil transport aircraft

    by Albert S. van Heerden, David M. Judt, Craig P. Lawson, Soheil Jafari, Theoklis Nikolaidis, David Bosak

    The development of increasingly more electric systems and ultra high bypass ratio turbofan engines for civil transport aircraft is projected to bring forth critical challenges regarding thermal management. To address these, it is required that the thermal behavior of the complete propulsion-airframe unit is studied in an integrated manner. To this purpose, a simulation framework for performing integrated thermal and performance analyses of the engines, airframe, and airframe systems, is presented. The framework was specifically devised to test novel integrated thermal management solutions for future civil aircraft. In this paper, the discussion focuses mainly on the thermal modeling of the wing and fuel. A highly flexible approach for creating wing thermal models by means of assembling generic thermal compartments is introduced. To demonstrate some of the capabilities, a case study is provided that involves thermal analysis of a single-aisle airplane with ultra high bypass ratio engines. Results are provided for fuel temperatures across flights in standard, hot, and cold days and for different airframe materials. Engine heat sink temperatures and input power to the engine gearboxes, both important parameters needed to design thermal management systems, are also presented.


  • Open Access

    Experimental investigation into aircraft system manual assembly performance under varying structural component orientations

    by David Judt, Craig Lawson, Helen Lockett

    Installation of aircraft wing systems is a bottleneck in the assembly process. This phase is typically composed of many work packages, taking hundreds of man-hours per wing. In addition to this volume of work, tasks are specialized and completed in a difficult environment in terms of access and visibility. In current industrial practice, the wing is mounted horizontally on a transport trolley, which exposes the workforce to prolonged periods of overhead working. Future wing designs may consider a pre-equipping build philosophy, where systems are installed to major structure assemblies before the wing box is assembled. This allows for a change in the orientation and position of the major structure and provides new freedoms in assembly station design and layout. This research presents results of experiments to investigate manual assembly performance of aircraft wing systems, under varying wing structure orientation. A mock-up of a section of an A320 aircraft wing front spar, mounted on a rotation device, functions as the testbed. Manual installation activities are then conducted to emulate real aircraft system equipping for electric harnesses, raceways and hot air ducts. The results show a best-case assembly performance change of 36% for electric system installation activities of cable harnesses and raceway housing components. Tilted and horizontal orientations of the structure show the highest time reductions, with the vertical orientation either non-conclusive or increasing the assembly time. The outcomes of this study are intended to aid in effective trade-off decision making for future wing systems and assembly station layouts from the perspective of structural orientation and assembly task interaction.


  • Impact of Engine Degradation on Optimum Aircraft Trajectories: Short Range

    by R. Navaratne, V. Sethi, C. Lawson

    This work aims to provide a methodology to enhance the conventional approach of the aircraft trajectory optimisation problem by including engine degradation and real aircraft flight paths within the optimisation framework; thereby the impact of engine degradation on optimum aircraft trajectories were assessed by quantifying the difference in fuel burn and emissions, when flying a trajectory which has been specifically optimised for an aircraft with degraded engines and flying a trajectory which has been optimised for clean engines. For the purpose of this study models of a clean and two degraded engines have been developed based on Exhaust Gas Temperature (EGT) margin deterioration. Aircraft performance model have been developed for short range aircraft with the capability of simulating vertical and horizontal flight profiles provides by the airlines. An emission prediction model was developed to assess NOx emissions of the mission. In addition, a multidisciplinary aircraft trajectory optimisation framework was developed to analyse short range flight trajectories under three cases. Case_1: Aircraft with clean engines, Case_2 and Case_3 were Aircraft with two levels of degraded engines. Two different multi objective optimisation studies were performed; (1) Fuel burn vs Flight time, and (2) Fuel burn vs NOx emission, Finally optimised trajectories generated with degraded engines were compared with the optimised trajectories generated with clean engines. The results have shown impact of engine degradation on optimum aircraft trajectories are significant and in order to reduce fuel burn and emissions aircraft need to fly on an optimised trajectory customised for the degraded engine performance.