Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zbigniew Pozorski has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Reduced Stiffness Modeling of Perforated Thin-Walled C- and Z-Sections with Warping Effects

    by Jolanta Pozorska, Zbigniew Pozorski, Tomasz Garbowski

    Web openings in cold-formed steel members modify not only individual stiffness components but also the interactions between bending, shear, torsion, and warping. Capturing these effects in a compact structural model is essential for repeated assessment of deflections and twist as opening geometry changes. This study develops a reduced stiffness formulation for perforated C- and Z-sections by combining shell finite element analysis, static condensation, and interface kinematics enriched with sectorial warping. The resulting 14 × 14 element matrix transfers the local influence of an opening into a beam-type representation suitable for assembling members with repeated or non-uniform perforations. Geometry-dependent stiffness variations are approximated using proper orthogonal decomposition and Gaussian process regression in an energy-scaled logarithmic matrix space, preserving rigid-body modes and positive deformational stiffness. Verification combines comparisons against continuous shell models with independent analytical torsion benchmarks for unperforated sections. For the investigated members, direct reduction decreases the number of degrees of freedom by factors of 662–794, with displacement and twist profile errors below 1.33%. A surrogate using three coefficients per section family reproduces the tested member responses for opening geometries excluded from training with errors below 0.47%. The framework provides a compact basis for preliminary stiffness assessment and opening-geometry studies within the small-displacement, pre-buckling elastic regime.

  • Open Access

    Toward Digital Twin-Driven Mushroom Cultivation: A Framework for Optimizing Growth, Yield, and Quality

    by Tomasz Garbowski, Tomasz Gajewski, Jakub Grabski, Dawid Karasiewicz, Damian Mrówczyński, Zbigniew Pozorski, Anna Szymczak-Graczyk, Dawid Walkowiak

    Mushroom cultivation is already a highly controlled biological production process. Temperature, relative humidity, carbon dioxide concentration, ventilation, substrate conditions, watering, and cultivation time are carefully managed, yet most strategies still rely on predefined setpoints and empirical experience. In this editorial, we argue that digital twins could provide the next step: not another monitoring platform, but a continuously updated virtual representation of the crop-production system. Such a twin should combine environmental measurements, substrate information, crop development, historical production data, and predictive models to estimate the current crop state and evaluate alternative cultivation strategies. The objective would not simply be better environmental control, but adaptive optimization of yield, quality, resource consumption, and production time. Mushroom cultivation therefore offers an unusually suitable environment in which digital twins could evolve from an engineering concept into a practical tool for biological production.

  • Open Access

    Reduced Stiffness Modeling of Perforated Thin-Walled C- and Z-Sections with Warping Effects

    by Jolanta Pozorska, Zbigniew Pozorski, Tomasz Garbowski

    Thin-walled cold-formed C- and Z-sections are widely used in lightweight structural systems, where web openings are frequently introduced for service integration, weight reduction, or manufacturing requirements. However, local perforations alter not only the classical bending and shear stiffness but also torsional response, warping, and the coupling between generalized deformation modes. This study develops a reduced stiffness framework for perforated thin-walled members based on static condensation of detailed shell finite element models. Each perforated segment is first condensed to its boundary degrees of freedom (DOF) and subsequently projected onto an enriched beam-type kinematic basis comprising six classical rigid-section modes and an additional sectorial warping mode. The resulting reduced element is described by a compact stiffness matrix that preserves the energetic influence of local deformation around the opening while enabling efficient one-dimensional assembly of long perforated members. The effect of perforation is expressed through an opening-induced stiffness correction relative to the corresponding unperforated segment. A low-dimensional representation of this correction is further investigated using proper orthogonal decomposition (POD), allowing the dependence of the reduced stiffness matrix on opening geometry to be represented by a limited number of dominant stiffness modes. Only three POD modes were required to represent more than 99.9% of the snapshot energy of the combined C- and Z-section stiffness-correction database, while the surrogate reconstruction error of the complete correction matrix remained approximately 1.5% on average. At member level, the proposed seven-DOF formulation reduced the number of structural degrees of freedom by approximately 400–455 times while keeping displacement and twist profile errors below 3.2%.

  • Open Access

    Local Instability of Sandwich Panel with a Core of Non-Linear Physical Properties

    by Jolanta Pozorska, Zbigniew Pozorski

    The article considers the basic mechanism of damage to sandwich panels, which is the local instability of the compressed panel facing. The fac-ing is connected to a shear-deformable core, which is treated as an infinite substrate in most instability problems. The paper addresses the prob-lem of determining the critical force in the case of a core whose properties (elastic moduli) differ in compression and tension. The distinction be-tween two zones (compression, tension) is substantively justified because the experimentally determined moduli of core elasticity in compres-sion and tension always differ from each other. This research provides equations for determining the critical force using the energy method. The examples illustrate the procedure for determining the critical load and the importance of the discussed issue. The obtained results indicate that the physical non-linearity of the core material influences the load value that causes local facing instability. The effect of this non-linearity has so far been overlooked in the literature in the context of sandwich panel mechanics. The presented solutions are of practical importance because they allow for the assessment of the sensitivity of the critical force and wrinkling stress to changes in core and facing physical properties.

  • Open Access

    An Energy-Consistent Framework for Shear Correction in Corrugated Sandwich Plates with Soft Cores

    by Tomasz Garbowski, Anna Szymczak-Graczyk, Zbigniew Pozorski

    Accurate evaluation of the transverse shear correction factor is essential for reliable modelling of sandwich plates with soft cores, particularly when first-order shear deformation theories are employed. Classical shear correction formulas are typically derived for homogeneous plates and become questionable when applied to sandwich structures with pronounced stiffness contrast and geometrically complex facings. This limitation is especially relevant for corrugated metallic facings filled with a shear-deformable core, where the assumption of clearly separated layers is no longer valid.In this study, an energy-based framework is proposed for determining the shear correction factor in sandwich plates with flat or corrugated facings, with or without filling of the corrugation ribs. The approach is founded on strain-energy equivalence and incorporates the non-uniform distribution of transverse shear stresses through a geometric shear form function. First, a closed-form formulation is derived for classical three-layer sandwich plates with homogenizable facings. Subsequently, the method is generalized using a pixel-based description of the cross-section, enabling direct treatment of geometrically interpenetrating configurations in which the core material penetrates the corrugation profile. The pixel-based formulation captures shear energy localization in deformable core regions and provides a shear correction factor that converges to classical results in the homogeneous and layered limits. The framework does not require finite element discretization and can be directly integrated into standard Mindlin–Reissner plate and shell models through energy-consistent scaling of transverse shear stiffness. The methodology offers a unified and physically transparent tool for evaluating shear correction factors in corrugated sandwich plates across different levels of geometric complexity.

  • Open Access

    Experimental and Numerical Analysis of Sandwich Structures

    by Zbigniew Pozorski, Jörg Lange, Agnieszka Sabik

    Sandwich structures have become a cornerstone of modern engineering, playing a pivotal role in aerospace, automotive, marine, and civil applications

  • Open Access

    On Local Instability of Deep-Profiled Facings in Sandwich Panels

    by Zbigniew Pozorski, Jolanta Pozorska, Zuzana Murčinková, Dawid Cekus

    This study focuses on the problem of local instability of sandwich panels, which consist of two thin but relatively stiff facings and a thick but shear-deformable core. Such structures are commonly used in civil engineering and in the aerospace, aviation, and automotive industries. A case is presented in which one of the facings is deep-profiled. Due to typical mechanical or thermal interactions, this facing is subjected to compression. The thick core of the sandwich panel plays a stabilizing role. However, at a specific critical load, local stability is lost, representing a typical form of damage that occurs in sandwich panels. In the case of a deep-profiled facing, the geometry of the facing must also be taken into account, specifically the fact that the bends resulting from profiling constitute a significant limitation to its deformation. In this study, expressions are derived that enable the determination of the critical (wrinkling) stress, taking into account the geometry of the compressed facing bands and various boundary conditions defined along their edges. The energy approach is used to solve the problem. The presented solution to the problem of local instability is illustrated using examples. The obtained results indicate that the use of narrow bands is particularly effective while also allowing for determination of the maximum benefits resulting from deep profiling of the facings. This information is essential when considering changes to the geometry of industrially produced sandwich panels or when optimizing the load-bearing capacity of individual sandwich elements.


  • Open Access

    On Local Instability of the Deep-Profiled Facing of a Sandwich Panel

    by Zbigniew Pozorski, Jolanta Pozorska, Zuzana Murčinková, Dawid Cekus

    The paper deals with the problem of local instability of sandwich panels, which consist of two thin but relatively stiff facings and a thick but shear-deformable core. Such structures are commonly used in civil engineering, as well as in the aerospace, aviation, and automotive industries. A case is presented when one of the facings is deep-profiled. Due to typical mechanical or thermal interactions, this facing is subjected to compression. The thick core of the sandwich panel plays a stabilizing role; however, at a specific critical load, local stability is lost, which is a typical form of damage in sandwich panels. In the case of a deep-profiled facing, the geometry of the facing must also be taken into account, specifically the fact that the bends resulting from profiling constitute a significant limitation to its deformation. In the paper, expressions are derived that enable the determination of the critical (wrinkling) stress, taking into account the geometry of the compressed facing bands and various boundary conditions defined along their edges. The energy approach will be used to solve the problem. The presented solution to the problem will be illustrated with examples. The obtained results indicate that the use of narrow bands is particularly effective, but they also allow for determining the maximum benefits resulting from deep profiling of the facings. This information is essential when considering changes to the geometry of industrially produced sandwich panels or optimizing the load-bearing capacity of individual sandwich elements.

  • Open Access

    Numerical modelling of sandwich panels subjected to fire conditions

    by El Mehdi Ablaoui, Jolanta Pozorska, Zbigniew Pozorski, Paweł Roszkowski, Michał Malendowski

    Journal of Applied Mathematics and Computational Mechanics, Prace Naukowe Instytutu Matematyki i Informatyki, Politechnika Częstochowska, Scientific Research of the Institute of Mathematics and Computer Science, Czestochowa University of Technology