TSTheodor Stern

Theodor Stern

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Theodor Stern has a total of 1 co-authors. Here are the top co-authors by number of shared publications:

  • Gad Marom

    Casali Center of Applied Chemistry The Institute of Chemistry and the Center for Nanoscience and Nanotechnology The Hebrew University of Jerusalem Jerusalem 91904 Israel

    1 shared publication

Latest Publications

  • Top Cited Papers
    Open Access

    Deciphering the Triple-Peak C-O-C Stretching FTIR Absorbance Consistently Occurring in Semicrystalline PEG

    by Theodor Stern

    Polyethylene glycol (PEG) is among the most intensively researched and applied polymers, exhibiting a very wide range of industrial, pharmaceutical, and biomedical applications. The strongest and most highly diagnostic absorbance in the FTIR spectrum of PEG and of PEG-containing polyurethanes, is the ether C-O-C stretching absorbance, which consistently appears as a triple-peak absorbance in a semicrystalline state. Surprisingly, this phenomenon has very seldom been mentioned or elaborated, and no direct structural diagnostic FTIR assignment has been determined for each component of the triple-peak. The present research conclusively demonstrates that the left-side and right-side components of the triple-peak are assigned to the chain-fold regions and the extended-chain regions of the crystallized chains, respectively, while the strong-wide central component is assigned to the randomly oriented chains in the amorphous phase of the semicrystalline PEG. The present demonstration was facilitated via the synthesis of a highly oriented fibrillar polyurethane block-copolymer, exclusively containing extended-chain-crystallized PEG soft-segments, obtained through dense hard-segment crosslinking under vigorous unidirectional shear-stress continuously applied during the synthesis. The present research results enable us to directly relate the FTIR spectra of PEG and block copolymers synthesized thereof, to their crystallization mechanisms and chain conformations, thus facilitating the development of improved industrial processing methods.


  • Top Cited Papers
    Open Access

    Fracture Mechanisms and Toughness in Polymer Nanocomposites: A Brief Review

    by Theodor Stern, Gad Marom

    This article underlines the observation that, unlike the underperformance of nanocomposites in as far as their static mechanical properties of modulus and strength are concerned, fracture toughness exhibits exceptional behavior. This is attributed to the fact that fracture toughness expresses a measure of the energy absorbed in crack propagation, namely, the energy involved in creating new surface area, which, in turn, is controlled by a specific type of energy-dissipating interaction of the crack front with nanoparticles. This concise review focuses on two micromechanisms that are considered representative of energy dissipation due to their frequent presence in nanocomposites of both nanoparticles and nanofibers. Examples taken from recent relevant articles are presented to showcase fracture toughness improvements by nanoparticles.


  • Open Access

    Transcrystalline Mechanism of Banded Spherulites Development in Melt-Crystallized Semicrystalline Polymers

    by Theodor Stern

    The decades-long paradigm of continuous and perpetual lamellar twisting constituting banded spherulites has been found to be inconsistent with several recent studies showing discontinuity regions between consecutive bands, for which, however, no explanation has been found. The present research demonstrates, in three different semicrystalline polymers (HDPE, PEG10000 and Pluronic F-127), that sequential transcrystallinity is the predominant mechanism of banded spherulite formation, heterogeneously nucleated on intermittent self-shear-oriented amorphous layers excluded during the crystals’ growth. It is hereby demonstrated that a transcrystalline layer can be nucleated on amorphous self-shear-oriented polymer chains in the melt, by a local melt flow in the bulk or in contact with any interface—even in contact with the interface with air, e.g., in contact with an entrapped air bubble or at the edges of the sample—or nucleated following the multiple directions and orientations induced by a turbulent flow. The bilateral excessive local exclusion of amorphous non-crystallizable material, following a short period of initial non-banded growth, is found to be the source of dislocations leading to spirally banded spherulites, through the transcrystalline layers’ nucleation thereon. The present research reveals and demonstrates the sequential transcrystalline morphology of banded spherulites and the mechanism of its formation, which may lead to new insights in the understanding and design of polymer processing for specific applications.


  • Open Access

    Single-Step Synthesis and Characterization of Non-Linear Tough and Strong Segmented Polyurethane Elastomer Consisting of Very Short Hard and Soft Segments and Hierarchical Side-Reacted Networks and Single-Step Synthesis of Hierarchical Hyper-Branched Polyurethane

    by Theodor Stern

    Polyurethane elastomers are among the most versatile classes of industrial polymers—typically achieved through a two-step synthesis of segmented block copolymers, comprising very long and soft segments that provide elasticity and significantly long and hard segments that provide strength. The present research focused on the design of a single-step synthesis of a new segmented polyurethane consisting of very short soft and hard segments, crosslinked by preferentially side-reacted hierarchical tertiary oligo-uret network structures, thus exhibiting significant strength, elasticity, and toughness. Despite the theoretically linear structure, both FTIR and solid-state 13C NMR spectroscopy analyses indicated the quasi-equal presence of urethane groups and tertiary oligo-uret structures in the resulting polymer, indicating a preferential consecutive side reaction mechanism. Thermal analysis indicated the significant crystallization of soft segments consisting of only four ethylene oxide units, which was, hereby, demonstrated to occur via an extended chain mechanism. Tensile mechanical properties included significant strength, elasticity, and toughness. Increasing the soft segment length led to a decreased tertiary oligo-uret secondary crosslinking efficacy. The preferential hierarchical side reaction mechanism was, hereby, further confirmed through the synthesis of a completely new type of hyper-branched polymer via diisocyanate and a mono-hydroxy-terminated reagent. The structure–property relations and reaction mechanisms demonstrated in the present research can facilitate the design of new polyurethanes of enhanced performance and processing efficacy for a variety of novel applications.


  • Open Access

    Chemical Structure and Side Reactions in Polyurea Synthesized via the Water–Diisocyanate Synthesis Pathway

    by Theodor Stern

    Industrial polyureas are typically synthesized using diisocyanates via two possible alternative pathways: the extremely quick and highly exothermal diamine–diisocyanate pathway and the relatively slow and mild water–diisocyanate pathway. Although polyurea synthesis via the water–diisocyanate pathway is known and has been industrially applied for many decades, there is surprisingly very little analytical information in the literature in relation to the type and extent of the occurring side reactions and the resulting chemical structures following this synthesis pathway. The synthesis of polyureas exhibiting very high concentrations of carbonyl-containing groups resulted in strong and accurate diagnostic analytical signals of combined FTIR and solid-state 13C NMR analysis. Despite the strictly linear theoretical chemical structure designed, the syntheses resulted in highly nonlinear and crosslinked polymers. It was analytically found that the water–diisocyanate pathway preferentially produced highly dominant and almost equal contents of both biuret structures and tertiary oligo-uret structures, with a very small occurrence of urea groups. This is in strong contrast with the chemical structures previously obtained via the diamine–diisocyanate polyurea synthesis pathway, which almost exclusively resulted in biuret structures. The much slower reaction and crosslinking rate of the water–diisocyanate synthesis pathway enabled the further access of isocyanate groups to the already-formed secondary nitrogens, thus facilitating the formation of complex hierarchical tertiary oligo-uret structures.


  • Side‐reactions in diisocyanate‐derived bulk polyurea synthesis

    by Theodor Stern

    Polyureas comprise a versatile family of polymers, widely applied mainly due to their outstanding mechanical properties. Nevertheless, due to the inherently very high reactivity of the isocyanate groups, polyurea synthesis is accompanied by crosslinking side‐reactions, strongly affecting the polymers properties, and possible applications. The present research focused on the direct investigation and diagnostic determination in solid state, of the possible chemical structures formation in bulk polyurea synthesis, using a combination of Fourier transform infrared (FTIR) and solid‐state 13C Nuclear magnetic resonance (NMR) analysis. Syntheses of polyureas were hereby designed to yield a very high density of the newly formed chemical structures and, consequently obtaining strong and accurate diagnostic analytical signals. The results of the present research, conclusively revealed that even in so‐designed linear polyureas, there is a predominant occurrence of biuret formation and a significantly lower urea group occurrence. Polyureas of a 2:1 excess of diisocyanate:diamine, exhibited an almost exclusive biuret content. Synthesis of a new branched and crosslinked polymer using a monoamine and diisocyanate, provided strong evidence of a preferential further side‐reaction of isocyanate groups with formed biurets, rather than with the very abundantly remaining urea groups to form new biurets. An energetically‐favorable mechanism for the further side‐reaction of formed biurets is hereby suggested. Solid‐state 13C NMR analysis results were highly consistent with the FTIR results.


  • Conclusive chemical deciphering of the consistently occurring double‐peak carbonyl‐stretching FTIR absorbance in polyurethanes

    by Theodor Stern

    Polyurethanes include an extremely vast and varied family of polymers, exhibiting a vast range of properties and applications. Although the urethane chemical structure consists of a single carbonyl group, the vast majority of polyurethane Fourier transform infrared spectroscopy (FTIR) spectra exhibit two distinct adjacent carbonyl‐stretching absorbances. It was the purpose of the present research to investigate and determine the reason of occurrence of this consistently observed phenomenon. A polyurethane, designed and synthesized here as linear and containing only urethane and methylene groups, strongly exhibited two very distinct carbonyl‐stretching FTIR absorbances. A new polyurethane, exhibiting an extremely high degree of trifunctional crosslinking, was hereby designed and synthesized to sterically inhibit diisocyanate access to already established urethanes and thus inhibit the allophanate and further tertiary oligo‐uret forming side‐reactions. The resulting polymer dramatically exhibited only a single, strong and sharp, carbonyl‐stretching FTIR absorbance belonging only to the urethane group. Synthesis of a polymer exhibiting a lower degree of crosslinking led to the reappearance of the split double carbonyl‐stretching FTIR absorbance. Solid‐state 13C NMR measurement results of the same polymers were highly consistent with the FTIR spectroscopy results. The experimental results of the present research conclusively prove and determine the exclusive side‐reaction‐related double carbonyl‐stretching absorbance in the FTIR analysis of polyurethanes. These research results conclusively reveal that, in fact, the so‐called linear polyurethanes synthesized from diisocyanates and diols are branched or even loosely crosslinked.


  • Hierarchical fractal‐structured allophanate‐derived network formation in bulk polyurethane synthesis

    by Theodor Stern

    Polyurethanes are among the most applied and researched polymers worldwide. Nevertheless, polyurethane synthesis is accompanied by a side‐reaction occurring between isocyanate groups and the secondary nitrogen of already formed urethane groups, leading to the formation of crosslinking allophanates. This inevitably requires the development of highly diagnostic direct analytical methods that can be performed in the solid state of the polymer. The present research focused on the direct investigation and diagnostic determination of the chemical structure formation in bulk polyurethane synthesis, using a combination of Fourier transform infrared and solid‐state 13C nuclear magnetic resonance analysis. Polyurethane syntheses were performed in bulk and designed as to obtain significantly strong diagnostic analytical measurements signals for the accurate identification of each of the investigated chemical structures. The present research results led to the conclusive analytical identification of allophanate formation during polyurethane synthesis. In addition, the occurrence of a new reaction mechanism was discovered in the present research. It was demonstrated in the present research that this newly described reaction occurs via the further reaction of the allophanate secondary nitrogen with an isocyanate group, the reaction creating a tertiary nitrogen and an additional reactive secondary nitrogen, and so on, in a consecutive step progression, leading to the formation of a 3‐dimensional hierarchical fractal‐like crosslinked polymeric structure. Solid‐state 13C nuclear magnetic resonance analysis results were highly consistent with the Fourier transform infrared results. The discovery of this newly described reaction can facilitate the optimization of industrial processes and potentially opens a new door to the development of a vast variety of biomedical and nanotechnology applications.


  • Polymeric micro‐sequential concentric transcrystalline morphology self‐assembly, with intermittent self‐shear‐oriented amorphous layers

    by Theodor Stern

    The investigation and understanding of polymer crystallization processes, the resulting crystalline morphologies, and the mechanism of their formation is crucial in creating materials with desired properties for specific applications.The present research introduces and investigates a new polymeric crystalline morphology, observed for the first time in this research.This newly observed morphology, is a sequentially micro‐multi‐layered concentric morphology that self‐assembles throughout the bulk polymer matrix, with intermittent self‐shear‐oriented amorphous layers. The research analyses the structure and mechanism of its formation.Polarized light microscopy studies have shown a drastic and sudden morphology change that occurred during crystalline growth. Crystalline‐growth kinetics studies performed, showed a distinct pulsatile repeating growth pattern of approximately two growth pulses per second. Thermal analysis indicated the presence of two different populations of crystalline strength. Crystalline structure was analyzed by XRD pattern measurements. It was demonstrated here, that the sequential concentric transcrystalline morphology is nucleated on a shear‐oriented amorphous molecular layer in the adjacent melt formed during and as a consequence of crystalline growth, which occurs in a micro‐periodic sequences, with intermittent self‐sheared amorphous layers. The structure was confirmed by both scanning electron microscope and reflectance microscopy. Small angle X‐ray scattering measurements of the same materials reported in literature are consistent with the melt shear‐orientation theory described earlier.The discovery of this new crystalline morphology in this research, potentially opens a new door in the vast field of material properties and applications. Copyright © 2017 John Wiley & Sons, Ltd.