Andreas Lesnik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andreas Lesnik has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Armin Dadgar
Otto-von-Guericke-Universität Magdeburg, Institut für Physik 3 , Magdeburg
10 shared publications - Andre Strittmatter
Otto-von-Guericke-Universität Magdeburg, Institut für Physik 1 , Universitätsplatz 2, 39106 Magdeburg
5 shared publications Jürgen Bläsing
Institut für Experimentelle Physik Otto‐von‐Guericke‐Universität Magdeburg Universitätsplatz 2 39106 Magdeburg Germany
4 shared publicationsJ. Bläsing
Institute of Experimental Physics, Otto-von-Guericke-University Magdeburg , Universitaetsplatz 2, 39106 Magdeburg, Germany
3 shared publicationsPeter Veit
Institut für Experimentelle Physik Otto‐von‐Guericke‐Universität Magdeburg Universitätsplatz 2 39106 Magdeburg Germany
3 shared publicationsA. Krost
Universitätsplatz 2 Otto-von-Guericke-Universität Magdeburg 39106 Magdeburg, Germany
2 shared publications
Latest Publications
- Open Access
- 6 March 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 125 (9) , 095704
Methodology for the investigation of threading dislocations as a source of vertical leakage in AlGaN/GaN-HEMT heterostructures for power devices
In this work, an AlGaN/GaN-HEMT heterostructure is exemplarily studied by a strict place-to-place correlational approach in order to help clarify some open questions in the wide field of reliability topics. Especially, vertical leakage current, its relation to dislocations in general, and specific types in particular are investigated on a highly defective material. With the aid of atomic force microscopy (AFM) in tapping mode, cathodoluminescence imaging, defect selective etching, and energy dispersive X-ray, the material’s defect content around the device relevant two dimensional electron gas is analyzed. The total dislocation density, as well as the density of threading screw, edge, and mixed type dislocations, is systematically investigated directly. The obtained result is statistically much more significant than is possible by conventional transmission electron microscopy studies and more precise than the results obtained by the indirect method of rocking curve analysis. The method of conductive AFM allowed mapping of variations in the vertical leakage current, which could be correlated with variations in barrier leakage or gate leakage. Spots of locally high leakage current could be observed and directly assigned to dislocations with a screw component, but with significant differences even within the same group of dislocation types. The electrical activity of dislocations is discussed in general, and a fundamental model for a potential dislocation driven vertical leakage is proposed.
- 6 March 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 125 (9) , 095704
Open AccessMethodology for the investigation of threading dislocations as a source of vertical leakage in AlGaN/GaN-HEMT heterostructures for power devices
In this work, an AlGaN/GaN-HEMT heterostructure is exemplarily studied by a strict place-to-place correlational approach in order to help clarify some open questions in the wide field of reliability topics. Especially, vertical leakage current, its relation to dislocations in general, and specific types in particular are investigated on a highly defective material. With the aid of atomic force microscopy (AFM) in tapping mode, cathodoluminescence imaging, defect selective etching, and energy dispersive X-ray, the material’s defect content around the device relevant two dimensional electron gas is analyzed. The total dislocation density, as well as the density of threading screw, edge, and mixed type dislocations, is systematically investigated directly. The obtained result is statistically much more significant than is possible by conventional transmission electron microscopy studies and more precise than the results obtained by the indirect method of rocking curve analysis. The method of conductive AFM allowed mapping of variations in the vertical leakage current, which could be correlated with variations in barrier leakage or gate leakage. Spots of locally high leakage current could be observed and directly assigned to dislocations with a screw component, but with significant differences even within the same group of dislocation types. The electrical activity of dislocations is discussed in general, and a fundamental model for a potential dislocation driven vertical leakage is proposed.
- Open Access
- 28 September 2018
- Published by American Physical Society (APS) in Physical Review B
- Vol. 98 (12) , 125207
Two charge states of the acceptor in GaN: Evidence from photoluminescenceWe have found a photoluminescence (PL) band with unusual properties in GaN. The blue band, termed as the band, has a maximum at about 2.9 eV and an extremely short lifetime (shorter than 1 ns for a free-electron concentration of about ). The electron- and hole-capture coefficients for this defect-related band are estimated as and , respectively. The band is observed only in GaN samples with relatively high concentration of carbon impurity, where the yellow luminescence (the YL1 band) with a maximum at 2.2 eV is the dominant defect-related PL. Both the YL1 and bands likely originate from the defect, namely, from electron transitions via the and thermodynamic transition levels of the . The band appears only at high excitation intensities in -type GaN samples codoped with Si and C, and it can be found in a wide range of excitation intensities in semi-insulating (presumably -type) GaN samples doped with C. The properties and behavior of the YL1 and bands can be explained using phenomenological models and first-principles calculations.- 28 September 2018
- Published by American Physical Society (APS) in Physical Review B
- Vol. 98 (12) , 125207
Open AccessTwo charge states of the acceptor in GaN: Evidence from photoluminescenceWe have found a photoluminescence (PL) band with unusual properties in GaN. The blue band, termed as the band, has a maximum at about 2.9 eV and an extremely short lifetime (shorter than 1 ns for a free-electron concentration of about ). The electron- and hole-capture coefficients for this defect-related band are estimated as and , respectively. The band is observed only in GaN samples with relatively high concentration of carbon impurity, where the yellow luminescence (the YL1 band) with a maximum at 2.2 eV is the dominant defect-related PL. Both the YL1 and bands likely originate from the defect, namely, from electron transitions via the and thermodynamic transition levels of the . The band appears only at high excitation intensities in -type GaN samples codoped with Si and C, and it can be found in a wide range of excitation intensities in semi-insulating (presumably -type) GaN samples doped with C. The properties and behavior of the YL1 and bands can be explained using phenomenological models and first-principles calculations. - 13 July 2017
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 122 (2) , 025704
Leakage currents and Fermi-level shifts in GaN layers upon iron and carbon-doping
Semi-insulating GaN is a prerequisite for lateral high frequency and high power electronic devices to isolate the device region from parasitic conductive channels. The commonly used dopants for achieving semi-insulating GaN, Fe, and C cause distinct properties of GaN layers since the Fermi-level is located either above (Fe) or below (C) the midgap position. In this study, precursor-based doping of GaN in metalorganic vapor phase epitaxy is used at otherwise identical growth conditions to control the dopant concentrations in the layer. Using electric force microscopy, we have investigated the contact potentials of Fe- and C-doped samples with respect to a cobalt metal probe tip in dependence of on the dopant concentration. While in Fe-doped samples the sign of the contact potential is constant, a change from positive to negative contact potential values is observed at high carbon concentrations, indicating the shift of the Fermi-level below the midgap position. In vertical transport measurements, C-doped GaN layers with a dopant concentration of 4.6 × 1018 cm−3 exhibit up to 5 orders of magnitude lower dark current at room temperature and significantly lower temperature dependence than Fe-doped samples with a similar dopant concentration. Therefore, precursor-based carbon doping is the superior doping technique to achieve semi-insulating GaN.
- 13 July 2017
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 122 (2) , 025704
Leakage currents and Fermi-level shifts in GaN layers upon iron and carbon-doping
Semi-insulating GaN is a prerequisite for lateral high frequency and high power electronic devices to isolate the device region from parasitic conductive channels. The commonly used dopants for achieving semi-insulating GaN, Fe, and C cause distinct properties of GaN layers since the Fermi-level is located either above (Fe) or below (C) the midgap position. In this study, precursor-based doping of GaN in metalorganic vapor phase epitaxy is used at otherwise identical growth conditions to control the dopant concentrations in the layer. Using electric force microscopy, we have investigated the contact potentials of Fe- and C-doped samples with respect to a cobalt metal probe tip in dependence of on the dopant concentration. While in Fe-doped samples the sign of the contact potential is constant, a change from positive to negative contact potential values is observed at high carbon concentrations, indicating the shift of the Fermi-level below the midgap position. In vertical transport measurements, C-doped GaN layers with a dopant concentration of 4.6 × 1018 cm−3 exhibit up to 5 orders of magnitude lower dark current at room temperature and significantly lower temperature dependence than Fe-doped samples with a similar dopant concentration. Therefore, precursor-based carbon doping is the superior doping technique to achieve semi-insulating GaN.
- 20 March 2017
- Published by AIP Publishing in Applied Physics Letters
- Vol. 110 (12)
Observation of individual stacking faults in GaN microcrystals by x-ray nanodiffraction
X-ray nanodiffraction was used for the investigation of basal stacking faults in a-GaN microcrystallites. The method made it possible to find the positions of individual stacking faults in a chosen crystallite, and the resulting positions were compared with the observation of individual faults by electron channeling contrast in scanning electron microscopy. The x-ray diffraction data revealed that the faults occur in closely positioned pairs; the stacking faults in a pair have opposite displacement vectors.
- 20 March 2017
- Published by AIP Publishing in Applied Physics Letters
- Vol. 110 (12)
Observation of individual stacking faults in GaN microcrystals by x-ray nanodiffraction
X-ray nanodiffraction was used for the investigation of basal stacking faults in a-GaN microcrystallites. The method made it possible to find the positions of individual stacking faults in a chosen crystallite, and the resulting positions were compared with the observation of individual faults by electron channeling contrast in scanning electron microscopy. The x-ray diffraction data revealed that the faults occur in closely positioned pairs; the stacking faults in a pair have opposite displacement vectors.
- Open Access
- 17 February 2017
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 50 (2) , 369-377
Twin domain imaging in topological insulator Bi2Te3 and Bi2Se3 epitaxial thin films by scanning X-ray nanobeam microscopy and electron backscatter diffraction
The twin distribution in topological insulators Bi2Te3 and Bi2Se3 was imaged by electron backscatter diffraction (EBSD) and scanning X-ray diffraction microscopy (SXRM). The crystal orientation at the surface, determined by EBSD, is correlated with the surface topography, which shows triangular pyramidal features with edges oriented in two different orientations rotated in the surface plane by 60°. The bulk crystal orientation is mapped out using SXRM by measuring the diffracted X-ray intensity of an asymmetric Bragg peak using a nano-focused X-ray beam scanned over the sample. By comparing bulk- and surface-sensitive measurements of the same area, buried twin domains not visible on the surface are identified. The lateral twin domain size is found to increase with the film thickness.
- 17 February 2017
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 50 (2) , 369-377
Open AccessTwin domain imaging in topological insulator Bi2Te3 and Bi2Se3 epitaxial thin films by scanning X-ray nanobeam microscopy and electron backscatter diffraction
The twin distribution in topological insulators Bi2Te3 and Bi2Se3 was imaged by electron backscatter diffraction (EBSD) and scanning X-ray diffraction microscopy (SXRM). The crystal orientation at the surface, determined by EBSD, is correlated with the surface topography, which shows triangular pyramidal features with edges oriented in two different orientations rotated in the surface plane by 60°. The bulk crystal orientation is mapped out using SXRM by measuring the diffracted X-ray intensity of an asymmetric Bragg peak using a nano-focused X-ray beam scanned over the sample. By comparing bulk- and surface-sensitive measurements of the same area, buried twin domains not visible on the surface are identified. The lateral twin domain size is found to increase with the film thickness.
- 26 December 2016
- Published by Wiley in Physica Status Solidi (b)
- Vol. 254 (8)
Properties of C‐doped GaN
Carbon‐doping in the concentration range from [C] = 5 × 1017 to 1.2 × 1019 cm−3 is employed to achieve semi‐insulating properties of GaN layers as required for electronic power devices. Using propane as a carbon precursor, an independent analysis of the carbon incorporation during growth and its impact on electrical properties of the layers was obtained as growth parameters for optimum GaN quality could be applied. We observe that C is within precision of measurements fully incorporated in GaN as compensating deep acceptor. In a series of Si + C co‐doped samples, semi‐insulating properties were obtained for [C] > [Si] and the compensation efficiency for electrons is around unity. Through the extrinsic C‐doping technique previous ambiguous results on electrical and optical properties of GaN:C layers are clarified.
- 26 December 2016
- Published by Wiley in Physica Status Solidi (b)
- Vol. 254 (8)
Properties of C‐doped GaN
Carbon‐doping in the concentration range from [C] = 5 × 1017 to 1.2 × 1019 cm−3 is employed to achieve semi‐insulating properties of GaN layers as required for electronic power devices. Using propane as a carbon precursor, an independent analysis of the carbon incorporation during growth and its impact on electrical properties of the layers was obtained as growth parameters for optimum GaN quality could be applied. We observe that C is within precision of measurements fully incorporated in GaN as compensating deep acceptor. In a series of Si + C co‐doped samples, semi‐insulating properties were obtained for [C] > [Si] and the compensation efficiency for electrons is around unity. Through the extrinsic C‐doping technique previous ambiguous results on electrical and optical properties of GaN:C layers are clarified.
- 21 November 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (21) , 212102
On reduction of current leakage in GaN by carbon-doping
Carbon-doping is proposed to reduce the dislocation-mediated leakage currents in the GaN buffer layers. GaN:C grown by metalorganic vapor phase epitaxy using propane shows excellent quality up to [C] = 6.7 × 1018 cm−3. Locally probing dislocations by surface scanning potential microscopy reveal a transition from mostly neutral or weakly charged regions to dominantly negatively charged regions relative to the surrounding area at high doping levels. A relation between leakage currents and the relative dislocation charge state exists. Minimum leakage current is achieved if the dominant charge state of dislocation regions becomes negative against the surrounding.
- 21 November 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (21) , 212102
On reduction of current leakage in GaN by carbon-doping
Carbon-doping is proposed to reduce the dislocation-mediated leakage currents in the GaN buffer layers. GaN:C grown by metalorganic vapor phase epitaxy using propane shows excellent quality up to [C] = 6.7 × 1018 cm−3. Locally probing dislocations by surface scanning potential microscopy reveal a transition from mostly neutral or weakly charged regions to dominantly negatively charged regions relative to the surrounding area at high doping levels. A relation between leakage currents and the relative dislocation charge state exists. Minimum leakage current is achieved if the dominant charge state of dislocation regions becomes negative against the surrounding.
- 1 April 2016
- Published by Elsevier in Journal of Crystal Growth
- Vol. 440, 6-12
Metalorganic chemical vapor phase epitaxy of narrow-band distributed Bragg reflectors realized by GaN:Ge modulation doping
- 1 April 2016
- Published by Elsevier in Journal of Crystal Growth
- Vol. 440, 6-12
Metalorganic chemical vapor phase epitaxy of narrow-band distributed Bragg reflectors realized by GaN:Ge modulation doping
- Open Access
- 1 July 2015
- Published by AIP Publishing in AIP Advances
- Vol. 5 (7) , 077146
Enhanced sheet carrier densities in polarization controlled AlInN/AlN/GaN/InGaN field-effect transistor on Si (111)
We report on GaN based field-effect transistor (FET) structures exhibiting sheet carrier densities of n = 2.9 1013 cm−2 for high-power transistor applications. By grading the indium-content of InGaN layers grown prior to a conventional GaN/AlN/AlInN FET structure control of the channel width at the GaN/AlN interface is obtained. The composition of the InGaN layer was graded from nominally xIn = 30 % to pure GaN just below the AlN/AlInN interface. Simulations reveal the impact of the additional InGaN layer on the potential well width which controls the sheet carrier density within the channel region of the devices. Benchmarking the InxGa1−xN/GaN/AlN/Al0.87In0.13N based FETs against GaN/AlN/AlInN FET reference structures we found increased maximum current densities of ISD = 1300 mA/mm (560 mA/mm). In addition, the InGaN layer helps to achieve broader transconductance profiles as well as reduced leakage currents.
- 1 July 2015
- Published by AIP Publishing in AIP Advances
- Vol. 5 (7) , 077146
Open AccessEnhanced sheet carrier densities in polarization controlled AlInN/AlN/GaN/InGaN field-effect transistor on Si (111)
We report on GaN based field-effect transistor (FET) structures exhibiting sheet carrier densities of n = 2.9 1013 cm−2 for high-power transistor applications. By grading the indium-content of InGaN layers grown prior to a conventional GaN/AlN/AlInN FET structure control of the channel width at the GaN/AlN interface is obtained. The composition of the InGaN layer was graded from nominally xIn = 30 % to pure GaN just below the AlN/AlInN interface. Simulations reveal the impact of the additional InGaN layer on the potential well width which controls the sheet carrier density within the channel region of the devices. Benchmarking the InxGa1−xN/GaN/AlN/Al0.87In0.13N based FETs against GaN/AlN/AlInN FET reference structures we found increased maximum current densities of ISD = 1300 mA/mm (560 mA/mm). In addition, the InGaN layer helps to achieve broader transconductance profiles as well as reduced leakage currents.
- 1 March 2015
- Published by Elsevier in Journal of Crystal Growth
- Vol. 414, 105-109
Growth of AlInN/GaN distributed Bragg reflectors with improved interface quality
- 1 March 2015
- Published by Elsevier in Journal of Crystal Growth
- Vol. 414, 105-109
Growth of AlInN/GaN distributed Bragg reflectors with improved interface quality