Xinlin Hong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xinlin Hong has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
- Guoliang Liu
Interdisciplinary Institute of NMR and Molecular Sciences Academy of Advanced Interdisciplinary Research Wuhan University of Science and Technology Wuhan P. R. China
9 shared publications - Shik Chi Edman Tsang
University of Oxford
7 shared publications Bing Hu
College of Chemistry and Molecular Sciences, Wuhan University, Wuhan 430072, P. R. China
6 shared publicationsFenglin Liao
Inorganic Chemistry Laboratory, University of Oxford, Oxford, UK
5 shared publicationsGuoliang Liu
College of Chemistry and Molecule Sciences Wuhan University Wuhan 430072 China
4 shared publicationsTangkang Liu
Interdisciplinary Institute of NMR and Molecular Sciences School of Chemistry and Chemical Engineering The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and Technology Wuhan 430081 PR China
4 shared publications
Latest Publications
- Open Access
- 30 May 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (28)
Pyridine‐Isomerism‐Driven Spin Engineering at a COP‐Fe 3 O 4 Interface for High‐Performance Oxygen Reduction Electrocatalysis
The oxygen reduction reaction (ORR) activity of earth‐abundant transition‐metal (TMOs) oxides is limited by inefficient interfacial charge transfer and unfavorable surface adsorption. Here, we report pyridine‐isomerism‐driven interfacial spin‐engineering in covalent organic polymer (COP)‐Fe 3 O 4 hybrids, where molecularly defined pyridinic environments program the electronic/spin structure of Fe 3 O 4 nanocrystals. Using 2,3‐ and 3,4‐diaminopyridine as isomeric building blocks, we construct pyridinic‐rich COPs that anchor Fe 3 O 4 and selectively tune metal‐polymer interaction. The 2,3‐COP positions the pyridinic N adjacent to the ─C═C─N─ linkage, strengthening COP‐Fe 3 O 4 interactions, enhancing interfacial electron withdrawal, and inducing a low‐ to intermediate‐spin transition of Fe species. Spectroscopic analysis corroborates this reconfiguration, which upshifts the Fe d‐band center, enriches unpaired electrons, and optimizes Fe‐O covalency, thereby lowering the barrier for OOH* activation and promoting a selective four‐electron ORR pathway with improved stability. Consequently, the designed 2,3‐COP‐Fe 3 O 4 electrocatalyst exhibits a stable half‐wave potential of 0.890 V in alkaline electrolyte, outperforming the noble‐metal benchmark. Moreover, when implemented in aqueous Zn‐air batteries, it delivers a maximum power density of 315.4 mW cm −2 and maintains stable operation for over 800 h at 10 mA cm −2 , exceeding most reported systems. These findings establish pyridine‐isomerism‐directed spin‐engineering as a versatile and scalable platform for designing applicable high‐performance TMO‐based electrocatalysts.
- 30 May 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (28)
Open AccessPyridine‐Isomerism‐Driven Spin Engineering at a COP‐Fe 3 O 4 Interface for High‐Performance Oxygen Reduction Electrocatalysis
The oxygen reduction reaction (ORR) activity of earth‐abundant transition‐metal (TMOs) oxides is limited by inefficient interfacial charge transfer and unfavorable surface adsorption. Here, we report pyridine‐isomerism‐driven interfacial spin‐engineering in covalent organic polymer (COP)‐Fe 3 O 4 hybrids, where molecularly defined pyridinic environments program the electronic/spin structure of Fe 3 O 4 nanocrystals. Using 2,3‐ and 3,4‐diaminopyridine as isomeric building blocks, we construct pyridinic‐rich COPs that anchor Fe 3 O 4 and selectively tune metal‐polymer interaction. The 2,3‐COP positions the pyridinic N adjacent to the ─C═C─N─ linkage, strengthening COP‐Fe 3 O 4 interactions, enhancing interfacial electron withdrawal, and inducing a low‐ to intermediate‐spin transition of Fe species. Spectroscopic analysis corroborates this reconfiguration, which upshifts the Fe d‐band center, enriches unpaired electrons, and optimizes Fe‐O covalency, thereby lowering the barrier for OOH* activation and promoting a selective four‐electron ORR pathway with improved stability. Consequently, the designed 2,3‐COP‐Fe 3 O 4 electrocatalyst exhibits a stable half‐wave potential of 0.890 V in alkaline electrolyte, outperforming the noble‐metal benchmark. Moreover, when implemented in aqueous Zn‐air batteries, it delivers a maximum power density of 315.4 mW cm −2 and maintains stable operation for over 800 h at 10 mA cm −2 , exceeding most reported systems. These findings establish pyridine‐isomerism‐directed spin‐engineering as a versatile and scalable platform for designing applicable high‐performance TMO‐based electrocatalysts.
- Open Access
- 3 June 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (26) , 20542-20551
Hydroxyl-oxygen vacancy synergy over In2O3–ZrO2 catalysts: mechanistic insights into CO2 hydrogenation to methanol
By regulating the surface structure of In2O3–ZrO2 catalysts, the study reveals that the FLP sites constructed from hydroxyl and oxygen vacancies are favourable for CO2 activation.
- 3 June 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (26) , 20542-20551
Open AccessHydroxyl-oxygen vacancy synergy over In2O3–ZrO2 catalysts: mechanistic insights into CO2 hydrogenation to methanol
By regulating the surface structure of In2O3–ZrO2 catalysts, the study reveals that the FLP sites constructed from hydroxyl and oxygen vacancies are favourable for CO2 activation.
- Open Access
- 19 February 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (7) , 2229-2237
Na-decorated binary spinel ferrite catalysts for the hydrogenation of CO2 to olefins
Spinel ferrite catalysts, recognized for their unique physicochemical properties, have been extensively employed in CO2 hydrogenation reactions.
- 19 February 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (7) , 2229-2237
Open AccessNa-decorated binary spinel ferrite catalysts for the hydrogenation of CO2 to olefins
Spinel ferrite catalysts, recognized for their unique physicochemical properties, have been extensively employed in CO2 hydrogenation reactions.
- Open Access
- 26 April 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 6 (12) , 3211-3219
Cobalt phthalocyanine (CoPc) anchored on Ti3C2 MXene nanosheets for highly efficient selective catalytic oxidation
The first case of highly efficient selective catalytic oxidation for the production of quinclorac over CoPc anchored Ti3C2 MXene nanosheets.
- 26 April 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 6 (12) , 3211-3219
Open AccessCobalt phthalocyanine (CoPc) anchored on Ti3C2 MXene nanosheets for highly efficient selective catalytic oxidation
The first case of highly efficient selective catalytic oxidation for the production of quinclorac over CoPc anchored Ti3C2 MXene nanosheets.
- 27 March 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (13)
Rational Design of Cobalt Phthalocyanine (CoPc)‐Anchored TiO 2 Nanorods for High‐Efficiency Selective Catalytic Oxidation
Quinclorac is important precursor for pharmaceutical, agricultural, and synthetic chemistry. The state‐of‐art synthesis of quinclorac via condensation, chlorination and oxidative hydrolysis often uses homogeneous catalysts and strong acid oxidant agents to promote the catalytic oxidation, which requires huge manpower input for the late‐stage purification process and is usually environmentally unfriendly. In this work, we successfully fabricated a stable cobalt phthalocyanine (CoPc) Co‐based composite (CoPc/TiO 2 ) by anchoring CoPc on the surface of TiO 2 nanorods for the selective oxidation of 3,7‐dichloro‐8‐dichloro methyl quinoline (3,7‐D‐8‐DMQ) into quinclorac. More impressively, CoPc/TiO 2 ‐2.5 %‐Mn‐Br exhibits a high selectivity of 91.9 % for the catalytic oxidation of 3,7‐D‐8‐DMQ to quinclorac in acetic acid, with a quinclorac yield of 86.4 %, which is approximately 2.43 times higher than that of pristine CoPc‐Mn‐Br. The obtained heterogeneous catalytic system shows good reusability. Detailed mechanistic investigations reveal that the system works through a free radical mechanism via the formation of Co 2+ /Co 3+ redox cycles. This work provides a new understanding for the stabilization of reaction intermediates and facilitates the designs of catalysts for selective catalytic oxidation.
- 27 March 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (13)
Rational Design of Cobalt Phthalocyanine (CoPc)‐Anchored TiO 2 Nanorods for High‐Efficiency Selective Catalytic Oxidation
Quinclorac is important precursor for pharmaceutical, agricultural, and synthetic chemistry. The state‐of‐art synthesis of quinclorac via condensation, chlorination and oxidative hydrolysis often uses homogeneous catalysts and strong acid oxidant agents to promote the catalytic oxidation, which requires huge manpower input for the late‐stage purification process and is usually environmentally unfriendly. In this work, we successfully fabricated a stable cobalt phthalocyanine (CoPc) Co‐based composite (CoPc/TiO 2 ) by anchoring CoPc on the surface of TiO 2 nanorods for the selective oxidation of 3,7‐dichloro‐8‐dichloro methyl quinoline (3,7‐D‐8‐DMQ) into quinclorac. More impressively, CoPc/TiO 2 ‐2.5 %‐Mn‐Br exhibits a high selectivity of 91.9 % for the catalytic oxidation of 3,7‐D‐8‐DMQ to quinclorac in acetic acid, with a quinclorac yield of 86.4 %, which is approximately 2.43 times higher than that of pristine CoPc‐Mn‐Br. The obtained heterogeneous catalytic system shows good reusability. Detailed mechanistic investigations reveal that the system works through a free radical mechanism via the formation of Co 2+ /Co 3+ redox cycles. This work provides a new understanding for the stabilization of reaction intermediates and facilitates the designs of catalysts for selective catalytic oxidation.
- 8 February 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (14)
Support‐induced structural changes in CO2 hydrogenation to higher alcohols over metal/oxide catalysts
CO2 emissions have received a great deal of attention in recent years. The hydrogenation of CO2 to higher alcohols (HA) by heterogeneous catalysis is a promising artificial carbon cycle pathway, which has important significance for mitigating energy and environmental problems. Among the heterogeneous catalysts, supported catalysts exhibit unique catalytic activity due to their abundance of surface‐tunable active sites such as oxygen vacancies, surface acidic/basic sites, and active hydroxyl groups. Given the complexity in the CO2 hydrogenation reaction networks, however, it is very challenging to reveal the nature and role of unique interfaces/sites induced by oxide support. Herein, we review the progress of several common oxide supports in the CO2 hydrogenation to HA over the last decades, and illustrate the regulatory mechanisms of the oxide‐induced synergy on the activation of intermediates and the C−C coupling reactions. Based on this, we also discuss the present challenges associated with the HA synthesis from CO2 hydrogenation, as well as the thinking oriented on oxide support‐induced structure changes to improve the selectivity and productivity of HA.
- 8 February 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (14)
Support‐induced structural changes in CO2 hydrogenation to higher alcohols over metal/oxide catalysts
CO2 emissions have received a great deal of attention in recent years. The hydrogenation of CO2 to higher alcohols (HA) by heterogeneous catalysis is a promising artificial carbon cycle pathway, which has important significance for mitigating energy and environmental problems. Among the heterogeneous catalysts, supported catalysts exhibit unique catalytic activity due to their abundance of surface‐tunable active sites such as oxygen vacancies, surface acidic/basic sites, and active hydroxyl groups. Given the complexity in the CO2 hydrogenation reaction networks, however, it is very challenging to reveal the nature and role of unique interfaces/sites induced by oxide support. Herein, we review the progress of several common oxide supports in the CO2 hydrogenation to HA over the last decades, and illustrate the regulatory mechanisms of the oxide‐induced synergy on the activation of intermediates and the C−C coupling reactions. Based on this, we also discuss the present challenges associated with the HA synthesis from CO2 hydrogenation, as well as the thinking oriented on oxide support‐induced structure changes to improve the selectivity and productivity of HA.
- 10 February 2023
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 53 (5) , 963-975
Photoelectrocatalytic treatment and resource utilization of industrial waste salt for chlor-alkali electrolysis
- 10 February 2023
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 53 (5) , 963-975
Photoelectrocatalytic treatment and resource utilization of industrial waste salt for chlor-alkali electrolysis
Programmatically Dynamic Microcompartmentation in Coacervate‐in‐Pickering Emulsion Protocell
The desire for exploration of cellular functional mechanisms has substantially increased the rapid development of artificial cells. However, the construction of synthetic cells with high organizational complexity remains challenging due to the lack of facile approaches ensuring dynamic multi‐compartments of cytoplasm and stability of membranes in protocells. Herein, a stable coacervate‐in‐Pickering emulsion protocell model comprising a membraneless coacervate phase formed by poly‐l‐lysine (PLys) and adenosine triphosphate (ATP) encapsulated in Pickering emulsion is put forward only through simple one‐step emulsification. The dynamic distribution of intracellular components (coacervates in this protocell model) can be manipulated by changes in temperature or pH. This coacervate‐in‐Pickering emulsion protocell system exhibits repeatable cycle stability in response to external stimuli (at least 24 cycles for temperature and 3 cycles for pH). By encapsulating antagonistic enzymes into coacervates, glucose oxidase (GOx) and urease as an example, the control of local enzyme concentration is achieved by introducing glucose and urea to adjust the pH value in Pickering emulsion droplets. This hybrid protocell model with programmatically dynamic microcompartmentation and sufficient stability is expected to be further studied and applied in cellular biology, facilitating the development of lifelike systems with potential in practical applications.
Programmatically Dynamic Microcompartmentation in Coacervate‐in‐Pickering Emulsion Protocell
The desire for exploration of cellular functional mechanisms has substantially increased the rapid development of artificial cells. However, the construction of synthetic cells with high organizational complexity remains challenging due to the lack of facile approaches ensuring dynamic multi‐compartments of cytoplasm and stability of membranes in protocells. Herein, a stable coacervate‐in‐Pickering emulsion protocell model comprising a membraneless coacervate phase formed by poly‐l‐lysine (PLys) and adenosine triphosphate (ATP) encapsulated in Pickering emulsion is put forward only through simple one‐step emulsification. The dynamic distribution of intracellular components (coacervates in this protocell model) can be manipulated by changes in temperature or pH. This coacervate‐in‐Pickering emulsion protocell system exhibits repeatable cycle stability in response to external stimuli (at least 24 cycles for temperature and 3 cycles for pH). By encapsulating antagonistic enzymes into coacervates, glucose oxidase (GOx) and urease as an example, the control of local enzyme concentration is achieved by introducing glucose and urea to adjust the pH value in Pickering emulsion droplets. This hybrid protocell model with programmatically dynamic microcompartmentation and sufficient stability is expected to be further studied and applied in cellular biology, facilitating the development of lifelike systems with potential in practical applications.