Roland Kalb
Research Subjects
Roland Kalb has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Patrick Mester
University of Veterinary Medicine Vienna Veterinaerplatz 1
3 shared publications - Julia Sommer
Christian Doppler Laboratory for Monitoring of Microbial Contaminants, Unit for Food Microbiology, Department of Veterinary Public Health and Food Science, University of Veterinary Medicine, 1210 Vienna, Austria
2 shared publications Markus Damm
Proionic GmbH, Grambach A-8074, Austria
2 shared publicationsPeter Rossmanith
2 shared publications- Aaron M. Socha
Department of Chemistry and Environmental Science, Queens University of Charlotte, Charlotte, USA
1 shared publication Andrew DeWeese
Department of Environmental Science and Chemistry, Queens University of Charlotte, 1900 Selwyn Avenue, Charlotte, North Carolina 28207, United States
1 shared publication
Latest Publications
- Open Access
- 15 April 2024
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 69 (5) , 1814-1823
Physicochemical Properties of 20 Ionic Liquids Prepared by the Carbonate-Based IL (CBILS) Process
Ionic liquids (ILs) are an emerging materials' class with applications in areas such as energy storage, catalysis, and biomass dissolution and processing. Their physicochemical properties including surface tension, viscosity, density and their interplay between cation and anion chemistry are decisive in these applications. For many commercially available ILs, a full set of physicochemical data is not available. Here, we extend the knowledge base by providing physicochemical properties such as density (20 and 25 °C), refractive index (20 and 25 °C), surface tension (23 °C, including polar and dispersive components), and shear viscosity (ambient atmosphere, shear rate 1-200 s-1), for 20 commercial ILs. A correlation between the crystal volume, dispersive surface tension, and shear viscosity is introduced as a predictive tool, allowing for viscosity estimation. Systematic exploration of cation/anion alkyl side chain lengths reveals the impact on the IL's physicochemical attributes. Increasing the anion's headgroup decreases surface tension up to 35.7% and consequently shear viscosity. We further demonstrate that the dispersive part of the surface tension linearly correlates with the refractive index of the ionic liquid. While we provide additional physicochemical data, the screening and modeling efforts will contribute to better structure property predictions enabling faster progress in design and applications of ILs.
- 15 April 2024
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 69 (5) , 1814-1823
Open AccessPhysicochemical Properties of 20 Ionic Liquids Prepared by the Carbonate-Based IL (CBILS) Process
Ionic liquids (ILs) are an emerging materials' class with applications in areas such as energy storage, catalysis, and biomass dissolution and processing. Their physicochemical properties including surface tension, viscosity, density and their interplay between cation and anion chemistry are decisive in these applications. For many commercially available ILs, a full set of physicochemical data is not available. Here, we extend the knowledge base by providing physicochemical properties such as density (20 and 25 °C), refractive index (20 and 25 °C), surface tension (23 °C, including polar and dispersive components), and shear viscosity (ambient atmosphere, shear rate 1-200 s-1), for 20 commercial ILs. A correlation between the crystal volume, dispersive surface tension, and shear viscosity is introduced as a predictive tool, allowing for viscosity estimation. Systematic exploration of cation/anion alkyl side chain lengths reveals the impact on the IL's physicochemical attributes. Increasing the anion's headgroup decreases surface tension up to 35.7% and consequently shear viscosity. We further demonstrate that the dispersive part of the surface tension linearly correlates with the refractive index of the ionic liquid. While we provide additional physicochemical data, the screening and modeling efforts will contribute to better structure property predictions enabling faster progress in design and applications of ILs.
- Open Access
- 5 March 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (5)
Ionic Hydraulic Fluids and Seal-Material Compatibility
Manufacturers of hydraulic fluids invest a lot of effort and resources in improving their physico-chemical properties, with the goal of getting as close as possible to the properties of an ideal hydraulic fluid. It should be non- flammable, environmentally friendly, sustainable and should have excellent physical and chemical properties. After decades of development in the field of ionic liquids and the search for an ionic liquid suitable for use in hydraulic systems, ionic hydraulic liquids are now already in industrial use, especially on devices that operate in harsh and risky operating conditions. Since ionic hydraulic fluids are a completely new type of hydraulic fluid, one of the issues is their compatibility with the materials present in the hydraulic components, including all the seals. This paper refers to the process of testing the compatibility of hydraulic seal materials with different types of ionic hydraulic fluids according to the standardized percentages and recommendations, with emphasis on changes in the swell, shrinkage and hardness of the seals. The presented results are a useful guide for selecting suitable seal materials in case of using high-tech ionic hydraulic fluids.
- 5 March 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (5)
Open AccessIonic Hydraulic Fluids and Seal-Material Compatibility
Manufacturers of hydraulic fluids invest a lot of effort and resources in improving their physico-chemical properties, with the goal of getting as close as possible to the properties of an ideal hydraulic fluid. It should be non- flammable, environmentally friendly, sustainable and should have excellent physical and chemical properties. After decades of development in the field of ionic liquids and the search for an ionic liquid suitable for use in hydraulic systems, ionic hydraulic liquids are now already in industrial use, especially on devices that operate in harsh and risky operating conditions. Since ionic hydraulic fluids are a completely new type of hydraulic fluid, one of the issues is their compatibility with the materials present in the hydraulic components, including all the seals. This paper refers to the process of testing the compatibility of hydraulic seal materials with different types of ionic hydraulic fluids according to the standardized percentages and recommendations, with emphasis on changes in the swell, shrinkage and hardness of the seals. The presented results are a useful guide for selecting suitable seal materials in case of using high-tech ionic hydraulic fluids.
- Open Access
- 11 September 2019
- Published by University of Maribor
- p. 133-146
Seal Material Compatibility Test Procedure
The International Fluid Power Conference is a two day event, intended for all those professionally-involved with hydraulic or pneumatic power devices and for all those, wishing to be informed about the ‘state of the art’, new discoveries and innovations within the field of hydraulics and pneumatics. The gathering of experts at this conference in Maribor has been a tradition since 1995, and is organised by the Faculty of Mechanical Engineering at the University of Maribor, in Slovenia. Fluid Power conferences are organised every second year and cover those principal technical events within the field of fluid power technologies in Slovenia, and throughout this region of Europe. This year's conference is taking place on the 19th and 20th September in Maribor. Mednarodna konferenca Fluidna tehnika 2019: Zbornik prispevkov. Mednarodne konference Fluidna tehnika/Fluid Power so dvodnevni dogodek, namenjen vsem, ki se profesionalno ukvarjajo s hidravličnimi ali pnevmatičnimi napravami in pogoni ter vsem tistim, ki želijo biti obveščeni o "najsodobnejšem stanju", novih odkritjih in novostih na področju hidravlike in pnevmatike. Srečanja strokovnjakov na teh konferencah v Mariboru je že tradicija od leta 1995; organizira pa ga Fakulteta za strojništvo Univerze v Mariboru. Konference so organizirane vsako drugo leto in so najpomembnejši dogodek s področja stroke v Sloveniji in v tem delu Evrope. Letošnja konferenca poteka 19. in 19. septembra v Mariboru.
- 11 September 2019
- Published by University of Maribor
- p. 133-146
Open AccessSeal Material Compatibility Test Procedure
The International Fluid Power Conference is a two day event, intended for all those professionally-involved with hydraulic or pneumatic power devices and for all those, wishing to be informed about the ‘state of the art’, new discoveries and innovations within the field of hydraulics and pneumatics. The gathering of experts at this conference in Maribor has been a tradition since 1995, and is organised by the Faculty of Mechanical Engineering at the University of Maribor, in Slovenia. Fluid Power conferences are organised every second year and cover those principal technical events within the field of fluid power technologies in Slovenia, and throughout this region of Europe. This year's conference is taking place on the 19th and 20th September in Maribor. Mednarodna konferenca Fluidna tehnika 2019: Zbornik prispevkov. Mednarodne konference Fluidna tehnika/Fluid Power so dvodnevni dogodek, namenjen vsem, ki se profesionalno ukvarjajo s hidravličnimi ali pnevmatičnimi napravami in pogoni ter vsem tistim, ki želijo biti obveščeni o "najsodobnejšem stanju", novih odkritjih in novostih na področju hidravlike in pnevmatike. Srečanja strokovnjakov na teh konferencah v Mariboru je že tradicija od leta 1995; organizira pa ga Fakulteta za strojništvo Univerze v Mariboru. Konference so organizirane vsako drugo leto in so najpomembnejši dogodek s področja stroke v Sloveniji in v tem delu Evrope. Letošnja konferenca poteka 19. in 19. septembra v Mariboru.
- 23 August 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (19) , 15865-15873
Biological Impact of Ionic Liquids Based on Sustainable Fatty Acid Anions Examined with a Tripartite Test System
- 23 August 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (19) , 15865-15873
Biological Impact of Ionic Liquids Based on Sustainable Fatty Acid Anions Examined with a Tripartite Test System
- 16 May 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (35) , 16009-16017
Cellulose Dissolution and Biomass Pretreatment Using Quaternary Ammonium Ionic Liquids Prepared from H-, G-, and S-Type Lignin-Derived Benzaldehydes and Dimethyl Carbonate
- 16 May 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (35) , 16009-16017
Cellulose Dissolution and Biomass Pretreatment Using Quaternary Ammonium Ionic Liquids Prepared from H-, G-, and S-Type Lignin-Derived Benzaldehydes and Dimethyl Carbonate
- 31 December 2018
- Published by American Chemical Society (ACS) in ACS Combinatorial Science
- Vol. 21 (2) , 90-97
FTIR Spectroscopy Suggests a Revised Mode of Action for the Cationic Side-Chain Effect of Ionic Liquids
Over the past decades, ionic liquids (ILs) have gained considerable attention from the scientific community because of their versatile and designable properties. As a result, there are numerous IL applications, not only in organic synthesis, catalysis, or extraction but also as active pharmaceutical ingredients or novel antimicrobials. While considerable effort has been put into developing quantitative structure–activity relationship (QSAR) models for IL toxicity prediction, little is known about their actual mode of action. In this study, Fourier transform infrared (FTIR) spectroscopy is used to monitor IL induced molecular responses directly at the cellular level. Investigation of the well-known cationic alkyl side-chain effect (increasing side-chain length leads to increasing toxicity) of imidazolium- and ammonium-based ILs on two bacterial pathogens, enteropathogenic Escherichia coli (EPEC) and methicillin-resistant Staphylococcus aureus (MRSA), surprisingly revealed two distinct modes of action. Contrary to prior models, it was only for [TMC16A][Cl], where a molecular response in the membrane was found, while ILs with shorter side-chain lengths predominantly affected bacterial proteins. The results of this study highlight the importance of further direct investigations of the impact of ILs at the cellular level to improve toxicity prediction and assess the usefulness of spectroscopic methods, such as FTIR spectroscopy at achieving this goal.
- 31 December 2018
- Published by American Chemical Society (ACS) in ACS Combinatorial Science
- Vol. 21 (2) , 90-97
FTIR Spectroscopy Suggests a Revised Mode of Action for the Cationic Side-Chain Effect of Ionic Liquids
Over the past decades, ionic liquids (ILs) have gained considerable attention from the scientific community because of their versatile and designable properties. As a result, there are numerous IL applications, not only in organic synthesis, catalysis, or extraction but also as active pharmaceutical ingredients or novel antimicrobials. While considerable effort has been put into developing quantitative structure–activity relationship (QSAR) models for IL toxicity prediction, little is known about their actual mode of action. In this study, Fourier transform infrared (FTIR) spectroscopy is used to monitor IL induced molecular responses directly at the cellular level. Investigation of the well-known cationic alkyl side-chain effect (increasing side-chain length leads to increasing toxicity) of imidazolium- and ammonium-based ILs on two bacterial pathogens, enteropathogenic Escherichia coli (EPEC) and methicillin-resistant Staphylococcus aureus (MRSA), surprisingly revealed two distinct modes of action. Contrary to prior models, it was only for [TMC16A][Cl], where a molecular response in the membrane was found, while ILs with shorter side-chain lengths predominantly affected bacterial proteins. The results of this study highlight the importance of further direct investigations of the impact of ILs at the cellular level to improve toxicity prediction and assess the usefulness of spectroscopic methods, such as FTIR spectroscopy at achieving this goal.
- Open Access
- 9 March 2018
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 19 (3) , 790
Virucidal or Not Virucidal? That Is the Question—Predictability of Ionic Liquid’s Virucidal Potential in Biological Test Systems
For three decades now, ionic liquids (ILs), organic salts comprising only ions, have emerged as a new class of pharmaceuticals. Although recognition of the antimicrobial effects of ILs is growing rapidly, there is almost nothing known about their possible virucidal activities. This probably reflects the paucity of understanding virus inactivation. In this study, we performed a systematic analysis to determine the effect of specific structural motifs of ILs on three different biological test systems (viruses, bacteria and enzymes). Overall, the effects of 27 different ILs on two non-enveloped and one enveloped virus (P100, MS2 and Phi6), two Gram negative and one Gram positive bacteria (E. coli, P. syringae and L. monocytogenes) and one enzyme (Taq DNA polymerase) were investigated. Results show that while some ILs were virucidal, no clear structure activity relationships (SARs) could be identified for the non-enveloped viruses P100 and MS2. However, for the first time, a correlation has been demonstrated between the effects of ILs on enveloped viruses, bacteria and enzyme inhibition. These identified SARs serve as a sound starting point for further studies.
- 9 March 2018
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 19 (3) , 790
Open AccessVirucidal or Not Virucidal? That Is the Question—Predictability of Ionic Liquid’s Virucidal Potential in Biological Test Systems
For three decades now, ionic liquids (ILs), organic salts comprising only ions, have emerged as a new class of pharmaceuticals. Although recognition of the antimicrobial effects of ILs is growing rapidly, there is almost nothing known about their possible virucidal activities. This probably reflects the paucity of understanding virus inactivation. In this study, we performed a systematic analysis to determine the effect of specific structural motifs of ILs on three different biological test systems (viruses, bacteria and enzymes). Overall, the effects of 27 different ILs on two non-enveloped and one enveloped virus (P100, MS2 and Phi6), two Gram negative and one Gram positive bacteria (E. coli, P. syringae and L. monocytogenes) and one enzyme (Taq DNA polymerase) were investigated. Results show that while some ILs were virucidal, no clear structure activity relationships (SARs) could be identified for the non-enveloped viruses P100 and MS2. However, for the first time, a correlation has been demonstrated between the effects of ILs on enveloped viruses, bacteria and enzyme inhibition. These identified SARs serve as a sound starting point for further studies.
- 10 April 2017
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 2 (4) , 432-436
Carbonate Based Ionic Liquid Synthesis (CBILS®): development of the continuous flow method for preparation of ultra-pure ionic liquids
Development of a new continuous flow method for preparation of ultra-pure ionic liquids; analytical verification includes highly sensitive combustion and solution calorimetry.
- 10 April 2017
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 2 (4) , 432-436
Carbonate Based Ionic Liquid Synthesis (CBILS®): development of the continuous flow method for preparation of ultra-pure ionic liquids
Development of a new continuous flow method for preparation of ultra-pure ionic liquids; analytical verification includes highly sensitive combustion and solution calorimetry.
- 21 October 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (46) , 31904-31913
Carbonate based ionic liquid synthesis (CBILS®): thermodynamic analysis
Devolvement and experimental verification of a new quantum-chemical calculation method for the prediction of Carbonate Based Ionic liquid Synthesis (CBILS®) reactions.
- 21 October 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (46) , 31904-31913
Carbonate based ionic liquid synthesis (CBILS®): thermodynamic analysis
Devolvement and experimental verification of a new quantum-chemical calculation method for the prediction of Carbonate Based Ionic liquid Synthesis (CBILS®) reactions.