Ankur Bordoloi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ankur Bordoloi has a total of 128 co-authors. Here are the top co-authors by number of shared publications:
Jyoti Gahtori
Nanocatalysis Area, Light Stock Processing Division, CSIR-Indian Institute of Petroleum, Dehradun 248005, Uttarakhand, India
9 shared publicationsManideepa Sengupta
Nano Catalysis, Light Stock Processing Division, CSIR-Indian Institute of Petroleum, Dehradun-248005, Uttarakhand, India
9 shared publications- Subhasis Das
Refinery Technology Division CSIR-Indian Institute of Petroleum, Dehradun- 248005 Uttarakhand India
8 shared publications - Arijit Bag
Maulana Abul Kalam Azad University of Technology West Bengal
7 shared publications - Reena Goyal
Nanocatalysis Area, Light Stock Processing Division, CSIR-Indian Institute of Petroleum, Dehradun-248005, India
6 shared publications Gaje Singh
Light and Stock Processing Division
5 shared publications
Latest Publications
- 31 March 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (7) , e70709
Recent Advances on Sustainable and Green Production of Light Olefins From Short‐Chain Alcohols via on‐Purpose Selective Catalytic Dehydration
Light olefins are primary building blocks for various value‐added chemicals and have become an indispensable part of our daily lives. Steam and fluid catalytic cracking are traditional methods for production of light olefins, which are highly energy‐intensive, amounting to significant CO 2 emissions. In light of the above aspects, the increasing demand for light olefins needs to be met through environmentally sustainable, energy efficient, and on‐purpose production routes having lower carbon footprint. Among them, selective catalytic dehydration of renewable alcohols to light olefins offers an attractive on‐purpose production route. Recent advances covering catalysts and processes in the production of light olefins from ethanol, C3 and C4 alcohols have been analyzed in this article. The narrative encompasses chemical composition of each catalytic system, role of supports and reaction parameters. A short overview regarding production scenarios of short‐chain alcohols from renewable feedstocks has been discussed at the beginning of each section.
- 31 March 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (7) , e70709
Recent Advances on Sustainable and Green Production of Light Olefins From Short‐Chain Alcohols via on‐Purpose Selective Catalytic Dehydration
Light olefins are primary building blocks for various value‐added chemicals and have become an indispensable part of our daily lives. Steam and fluid catalytic cracking are traditional methods for production of light olefins, which are highly energy‐intensive, amounting to significant CO 2 emissions. In light of the above aspects, the increasing demand for light olefins needs to be met through environmentally sustainable, energy efficient, and on‐purpose production routes having lower carbon footprint. Among them, selective catalytic dehydration of renewable alcohols to light olefins offers an attractive on‐purpose production route. Recent advances covering catalysts and processes in the production of light olefins from ethanol, C3 and C4 alcohols have been analyzed in this article. The narrative encompasses chemical composition of each catalytic system, role of supports and reaction parameters. A short overview regarding production scenarios of short‐chain alcohols from renewable feedstocks has been discussed at the beginning of each section.
- 16 July 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (30) , 14765-14781
Substituted LaNiO3 Perovskites for Efficient CO2 Methanation: Unveiling the Synergy of Basicity and Oxygen Storage
- 16 July 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (30) , 14765-14781
Substituted LaNiO3 Perovskites for Efficient CO2 Methanation: Unveiling the Synergy of Basicity and Oxygen Storage
- Open Access
- 26 October 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (23) , e202401187
On‐Purpose Production of Light Olefins Through Oxidative Dehydrogenation: An Overview of Recent Developments
Products made from light olefins play an important role in our daily lives. Traditional light olefins production based on steam cracking and fluid catalytic cracking suffer from high energy consumption and CO2 emissions. Thereby, the continually increasing demand for light olefins needs to be met through more environmentally sustainable procedures. On‐purpose production routes are preferred choice among petrochemicals manufacturers, being energy efficient and having lower carbon footprint. Among them, oxidative dehydrogenation (ODH) of light paraffins is a thermodynamically favourable exothermic process as compared to non‐oxidative routes. They can be operated at lower temperatures and have propensity of low coke deposition on catalyst, thereby resisting rapid catalyst deactivation. Herein, we have analysed various catalytic systems utilised in the oxidative dehydrogenation process. We have reviewed role of support, chemical composition of catalyst, presence of dopant, oxidation state of active metal, controlled surface modification by oxidative and reductive pretreatments, and reaction factors for each system. The performance of various catalytic systems for ODH of ethane, propane and butane in the presence of O2, CO2, N2O and special oxidants have been reviewed. A short critical overview on emerging on‐purpose routes for the production of renewable 1,3 butadiene has also been discussed.
- 26 October 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (23) , e202401187
Open AccessOn‐Purpose Production of Light Olefins Through Oxidative Dehydrogenation: An Overview of Recent Developments
Products made from light olefins play an important role in our daily lives. Traditional light olefins production based on steam cracking and fluid catalytic cracking suffer from high energy consumption and CO2 emissions. Thereby, the continually increasing demand for light olefins needs to be met through more environmentally sustainable procedures. On‐purpose production routes are preferred choice among petrochemicals manufacturers, being energy efficient and having lower carbon footprint. Among them, oxidative dehydrogenation (ODH) of light paraffins is a thermodynamically favourable exothermic process as compared to non‐oxidative routes. They can be operated at lower temperatures and have propensity of low coke deposition on catalyst, thereby resisting rapid catalyst deactivation. Herein, we have analysed various catalytic systems utilised in the oxidative dehydrogenation process. We have reviewed role of support, chemical composition of catalyst, presence of dopant, oxidation state of active metal, controlled surface modification by oxidative and reductive pretreatments, and reaction factors for each system. The performance of various catalytic systems for ODH of ethane, propane and butane in the presence of O2, CO2, N2O and special oxidants have been reviewed. A short critical overview on emerging on‐purpose routes for the production of renewable 1,3 butadiene has also been discussed.
- 8 August 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (20)
On the Correlation between Group III‐A Elements Doping and Structure Performance of Cu/ZnO/ZrO2 Catalysts System for CO2 Hydrogenation to Methanol
A set of Cu/ZnO/ZrO2 catalysts doped with Group‐IIIA elements (M=B, Al, Ga & In) were synthesized via a facile single‐step evaporation‐induced self‐assembly (EISA) method to tune up the catalyst basicity and modulate the structure to improve the methanol yield in CO2 hydrogenation reaction. To understand the catalyst‘s textural properties and catalytic activity, prepared catalysts were exposed to several in‐situ/ex‐situ characterization techniques like Physisorption & Chemisorption studies, XRD, XPS, TEM, and in‐situ DRIFT. The addition of group IIIA elements has a significant impact on the CO2 conversion and Methanol selectivity via tailoring the important textural properties such as metallic surface area of Cu, reducibility of catalysts, particle size, controlled oxygen vacancy, and basicity of catalyst surface. CZZ doped with Al appeared to be the best catalyst, in this study. The modified Cu‐ZnO interface via density functional theory (DFT) calculations also indicated that the CO2 adsorption energy is found to be highest for CZZAl, which is concomitant with CO2‐TPD analysis results. The lowest to highest CO2 adsorption energy order over the catalyst set follows CZZIn2 adsorption.
- 8 August 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (20)
On the Correlation between Group III‐A Elements Doping and Structure Performance of Cu/ZnO/ZrO2 Catalysts System for CO2 Hydrogenation to Methanol
A set of Cu/ZnO/ZrO2 catalysts doped with Group‐IIIA elements (M=B, Al, Ga & In) were synthesized via a facile single‐step evaporation‐induced self‐assembly (EISA) method to tune up the catalyst basicity and modulate the structure to improve the methanol yield in CO2 hydrogenation reaction. To understand the catalyst‘s textural properties and catalytic activity, prepared catalysts were exposed to several in‐situ/ex‐situ characterization techniques like Physisorption & Chemisorption studies, XRD, XPS, TEM, and in‐situ DRIFT. The addition of group IIIA elements has a significant impact on the CO2 conversion and Methanol selectivity via tailoring the important textural properties such as metallic surface area of Cu, reducibility of catalysts, particle size, controlled oxygen vacancy, and basicity of catalyst surface. CZZ doped with Al appeared to be the best catalyst, in this study. The modified Cu‐ZnO interface via density functional theory (DFT) calculations also indicated that the CO2 adsorption energy is found to be highest for CZZAl, which is concomitant with CO2‐TPD analysis results. The lowest to highest CO2 adsorption energy order over the catalyst set follows CZZIn2 adsorption.
- Open Access
- 29 June 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (29) , 14066-14080
Polyoxometalate-HKUST-1 composite derived nanostructured Na–Cu–Mo 2 C catalyst for efficient reverse water gas shift reaction
Transforming CO 2 to CO via reverse water–gas shift (RWGS) reaction is widely regarded as a promising technique for improving the efficiency and economics of CO 2 utilization processes.
- 29 June 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (29) , 14066-14080
Open AccessPolyoxometalate-HKUST-1 composite derived nanostructured Na–Cu–Mo 2 C catalyst for efficient reverse water gas shift reaction
Transforming CO 2 to CO via reverse water–gas shift (RWGS) reaction is widely regarded as a promising technique for improving the efficiency and economics of CO 2 utilization processes.
- Open Access
- 6 March 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (14) , 8457-8473
Sorption enhanced CO2 hydrogenation to formic acid over CuZn-MOF derived catalysts
A series of Cu–Zn@CNx catalysts incorporated with platinum group metal (PGM) elements, such as Ru, Pd, Pt, and Ir were synthesised via the hard template approach, where a metal–organic framework (MOF) is utilised as a hard template.
- 6 March 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (14) , 8457-8473
Open AccessSorption enhanced CO2 hydrogenation to formic acid over CuZn-MOF derived catalysts
A series of Cu–Zn@CNx catalysts incorporated with platinum group metal (PGM) elements, such as Ru, Pd, Pt, and Ir were synthesised via the hard template approach, where a metal–organic framework (MOF) is utilised as a hard template.
- 25 September 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (83) , 12475-12478
Boosting the methanol selectivity in CO2 hydrogenation over a MOF-derived CuZn@CN catalyst via Rb incorporation
The highly selective hydrogenation of CO2 to methanol has been achieved through the simultaneous utilization of alkali metals and Co as promoters over Cu–Zn@CN catalysts derived from MOF.
- 25 September 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (83) , 12475-12478
Boosting the methanol selectivity in CO2 hydrogenation over a MOF-derived CuZn@CN catalyst via Rb incorporation
The highly selective hydrogenation of CO2 to methanol has been achieved through the simultaneous utilization of alkali metals and Co as promoters over Cu–Zn@CN catalysts derived from MOF.
- 15 August 2023
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 25 (19) , 7729-7742
Ni–N synergy enhanced the synthesis of formic acid via CO2 hydrogenation under mild conditions
Catalytic hydrogenation of CO2 to formic acid over Ni-based catalyst supported over N-doped TiO2.
- 15 August 2023
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 25 (19) , 7729-7742
Ni–N synergy enhanced the synthesis of formic acid via CO2 hydrogenation under mild conditions
Catalytic hydrogenation of CO2 to formic acid over Ni-based catalyst supported over N-doped TiO2.
- 14 July 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (30) , 11181-11198
Comparative Study of Short-Chain Olefins Synthesis via CO2 Hydrogenation over Iron-Containing Double Metal Cyanide-Derived Catalysts
- 14 July 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (30) , 11181-11198
Comparative Study of Short-Chain Olefins Synthesis via CO2 Hydrogenation over Iron-Containing Double Metal Cyanide-Derived Catalysts