Jane Frommer

Assembly from ultra-small solution droplets follows a different dynamic from that of larger scales. Using an independently controlled microfluidic probe in an atomic force microscope, sub-femtoliter aqueous droplets containing polymers produce well-defined features with dimensions as small as tens of nanometers. The initial shape of the droplet and the concentration of solute within the droplet play a significant role in the final assembly of polymers due to the ultrafast evaporation rate and spatial confinement by the small droplets. These effects are used to control the final molecular assembly in terms of feature geometry and distribution and packing of individual molecules within the features. This work introduces new means of control over molecular assembly, bringing us closer to programmable synthesis for chemistry and materials science. The outcomes pave the way for three-dimensional (3D) nanoprinting in additive manufacturing.

Direct writing methods are a generic and simple means to produce designed structures in three dimensions (3D). The printing is achieved by extruding printing materials through a nozzle, which provides a platform to deliver a wide range of materials. Although this method has been routinely used for 3D printing at macroscopic scales, miniaturization to micrometer and nanometer scales and building hierarchical structures at multidimensional scales represent new challenges in research and development. The current work addresses these challenges by combining the spatial precision of atomic force microscopy (AFM) and local delivery capability of microfluidics. Specialized AFM probes serve dual roles of a microscopy tip and a delivery tool, enabling the miniaturization of 3D printing via direct material delivery. Stacking grids of 20 μm periodicity were printed layer-by-layer covering 1 mm × 1 mm regions. The spatial fidelity was measured to be several nanometers, which is among the highest in 3D printing. The results clearly demonstrate the feasibility of achieving high precision 3D nanoprinting with nanometer feature size and accuracy with practical throughput and overall size. This work paves the way for advanced applications of 3D hierarchical nanostructures.

Historically, the integration of insulators with decreasing dielectric constants, k, has been critical in improving devices performance. The most efficient approach to decrease k is by introducing porosity. Since porosity directly impacts the Young's modulus, the accurate determination of the mechanical properties of porous dielectrics is essential in enabling their implementation into state-of-the-art devices. Currently, nanoindentation is the technique of choice, but as technology relevant thicknesses of dielectrics keep decreasing, substrate effects are unavoidably encountered. These issues have so far been circumvented by measuring bulk materials instead of their thin-film counterparts. This approach is, however, less than ideal as physical properties can be size-dependent. Moreover, pores densification also occurs, potentially leading to overestimated Young's modulus values. In this paper, we define a novel protocol based on ultra-low load, quasi-static nanoindentation to measure mechanical properties of porous thin-films as a function of porosity (0–60%) and thickness (150–700 nm). We could isolate materials densification from substrate effect, and we demonstrated that the former can be accounted for, while the latter does not happen until indentation depths are remarkably higher than the traditionally accepted indentation limit of 10% of the film thickness. Consequently, extremely accurate mechanical characterization of porous low-k thin-films is now possible.

Three-dimensional (3D) printing has been a very active area of research and development due to its capability to produce 3D objects by design. Miniaturization and improvement of spatial resolution are major challenges in current 3D printing technology development. This work reports advances in miniaturizing 3D printing to the nanometer scale using scanning probe microscopy in conjunction with local material delivery. Using polyelectrolyte polymers and complexes, we have demonstrated the concept of layer-by-layer nanoprinting by design. Nanometer precision is achieved in all three dimensions, as well as in interlayer registry. The approach enables production of designed functional 3D materials with nanometer resolution and, as such, creates a platform for conducting scientific research in designed 3D nanoenvironments as well. In doing so, it enables production of nanomaterials and scaffolds for photonics devices, biomedicine, and tissue engineering.

Photoinduced force microscopy resolves nanometer-scale topology with chemical recognition based on material absorption.

A method of producing a bit-patterned media on a flexible substrate using a low-cost, hot nanoimprinting process is investigated. Using a topographic master with features as small as 40 nm, a flexible plastic substrate is patterned with high fidelity. Magnetic material is sputter-deposited onto the patterned substrate to produce a magnetic tape media with densities as high as 100 Gigadot/in 2 . Magnetic recording characteristics of the coated bit-patterned tape is evaluated in an apparatus which slides a recording head on the media with a high-resolution positioning capability.

We investigate the effect of two different surface treatments on shallow nitrogen-vacancy (NV) centers in diamond. Short duration oxygen plasma exposure is found to damage near-surface NV centers, resulting in their disappearance in fluorescence images. Subsequent annealing creates large numbers of new NV centers, attributed to plasma-induced vacancy creation. By tracking individual NV centers during thermal oxidation, we show that oxidation at 550 °C results in modest improvement of spin coherence. Higher temperature oxidations correlate with gradual decline in spin coherence and eventual instability of NV centers before ultimate disappearance. This is indicative of a reduction of the NV-to-surface distance due to oxidative etching. Thermal oxidation can offer controlled access to near-surface NV spins at the nanometer scale, an important requirement for many applications of NV-based nanomagnetometry.