Khaleel Al-Adham
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Khaleel Al-Adham has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Muhammad Abubakar Dalhat
Transportation and Traffic Engineering Department, College of Engineering, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia
4 shared publications H. I. Al-Abdul Wahhab
Civil & Environmental Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia
2 shared publicationsHamad Al-Abdul Wahhab
2 shared publicationsArshad Jamal
1 shared publicationHamad Al-AbdulWahhab
1 shared publicationHamad I. Al-Abdul Wahhab
1 shared publication
Latest Publications
- Open Access
- 27 March 2023
- Published by Elsevier in Journal of Traffic and Transportation Engineering (English Edition)
- Vol. 10 (2) , 159-184
Review on laboratory preparation processes of polymer modified asphalt binder
- 27 March 2023
- Published by Elsevier in Journal of Traffic and Transportation Engineering (English Edition)
- Vol. 10 (2) , 159-184
Open AccessReview on laboratory preparation processes of polymer modified asphalt binder
- Open Access
- 1 February 2022
- Published by Elsevier in Journal of Traffic and Transportation Engineering (English Edition)
- Vol. 9 (1) , 120-133
Refinement and estimation of asphalt flow number using partial load history
- 1 February 2022
- Published by Elsevier in Journal of Traffic and Transportation Engineering (English Edition)
- Vol. 9 (1) , 120-133
Open AccessRefinement and estimation of asphalt flow number using partial load history
- 6 June 2020
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 21 (7) , 919-929
Strain recovery rate and absolute per cent recovery of polymer-modified asphalt binders
Multiple Stress Creep and Recovery (MSCR) test was conducted on four different types of polymer-modified asphalt (PMA) with three different performance grade (PG) levels, at two stress levels (0.1 and 3.2 kPa) and four temperatures (58 degrees C, 64 degrees C, 70 degrees C and 76 degrees C). Strain recovery rates, absolute per cent recovery and creep compliance recovery rate of the PMAs at near instantaneous (NI) and near steady-state (NSS) regions were estimated and analysed. Higher levels of applied stress and temperature have induced a correspondingly higher rate of strain recovery both at NI (RRNI) and NSS, due to additional rebound energy accompanying more sustained deformation. Similar but mild strain recovery rate trend was observed with increasing PG. The strain recovery rate is inversely proportional to the per cent strain recovered, for a given temperature and applied stress, both at NI and at NSS region. An absolute per cent recovery at NI (%R-NI) and NSS (%R-NSS) was estimated in terms of the strain recovery rates. The %R-NI is relatively constant for all rest periods, and can be obtained within the first 2 seconds of the creep-recovery cycle. Finally, even though the conventional MSCR parameters (i.e. J(nr) and R) showed statistically significant correlation with the AC rutting, some strain recovery rate base parameters (%R-NI and %R-NSS) demonstrate a statistically better correlation with the AC rutting.
- 6 June 2020
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 21 (7) , 919-929
Strain recovery rate and absolute per cent recovery of polymer-modified asphalt binders
Multiple Stress Creep and Recovery (MSCR) test was conducted on four different types of polymer-modified asphalt (PMA) with three different performance grade (PG) levels, at two stress levels (0.1 and 3.2 kPa) and four temperatures (58 degrees C, 64 degrees C, 70 degrees C and 76 degrees C). Strain recovery rates, absolute per cent recovery and creep compliance recovery rate of the PMAs at near instantaneous (NI) and near steady-state (NSS) regions were estimated and analysed. Higher levels of applied stress and temperature have induced a correspondingly higher rate of strain recovery both at NI (RRNI) and NSS, due to additional rebound energy accompanying more sustained deformation. Similar but mild strain recovery rate trend was observed with increasing PG. The strain recovery rate is inversely proportional to the per cent strain recovered, for a given temperature and applied stress, both at NI and at NSS region. An absolute per cent recovery at NI (%R-NI) and NSS (%R-NSS) was estimated in terms of the strain recovery rates. The %R-NI is relatively constant for all rest periods, and can be obtained within the first 2 seconds of the creep-recovery cycle. Finally, even though the conventional MSCR parameters (i.e. J(nr) and R) showed statistically significant correlation with the AC rutting, some strain recovery rate base parameters (%R-NI and %R-NSS) demonstrate a statistically better correlation with the AC rutting.
- 1 June 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (6)
Multiple Stress–Creep–Recovery Behavior and High-Temperature Performance of Styrene Butadiene Styrene and Polyacrylonitrile Fiber–Modified Asphalt Binders
Asphalt binders and concretes modified with polyacrylonitrile (PAN) fiber, styrene butadiene styrene (SBS), and the combination of PAN-SBS were prepared and studied. Both frequency and temperature sweep tests for the binder dynamic shear modulus G*, rutting, and fatigue parameters were carried out. Multiple stress creep recovery (MSCR) test was also conducted on the various modified asphalt binders. The complex modulus E* and flow number (FN) of asphalt concretes (AC) from the modified binders were also examined using asphalt mixture performance tester (AMPT) test. The PAN fiber asphalt binder showed better response in terms of dynamic modulus, fatigue and rutting parameter, nonrecoverable creep compliance and percent strain recovery at 1% fiber content. The hybrid binder ( ) demonstrated overall shear modulus almost twice that exhibited by 2%SBS binder. The hybrid asphalt binder showed the greatest potential for rut resistance, over most of the frequency range, relative to all other binders. It was clear that the combined form of the polymer and the fiber modification has greater rutting resistance potential than the single modification approach generally practiced. The hybrid asphalt binder also showed better fatigue parameter than all the binders within pavement design load frequency range. Results from the AC mix tests verified most of the trends observed from the asphalt binder tests.- 1 June 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (6)
Multiple Stress–Creep–Recovery Behavior and High-Temperature Performance of Styrene Butadiene Styrene and Polyacrylonitrile Fiber–Modified Asphalt Binders
Asphalt binders and concretes modified with polyacrylonitrile (PAN) fiber, styrene butadiene styrene (SBS), and the combination of PAN-SBS were prepared and studied. Both frequency and temperature sweep tests for the binder dynamic shear modulus G*, rutting, and fatigue parameters were carried out. Multiple stress creep recovery (MSCR) test was also conducted on the various modified asphalt binders. The complex modulus E* and flow number (FN) of asphalt concretes (AC) from the modified binders were also examined using asphalt mixture performance tester (AMPT) test. The PAN fiber asphalt binder showed better response in terms of dynamic modulus, fatigue and rutting parameter, nonrecoverable creep compliance and percent strain recovery at 1% fiber content. The hybrid binder ( ) demonstrated overall shear modulus almost twice that exhibited by 2%SBS binder. The hybrid asphalt binder showed the greatest potential for rut resistance, over most of the frequency range, relative to all other binders. It was clear that the combined form of the polymer and the fiber modification has greater rutting resistance potential than the single modification approach generally practiced. The hybrid asphalt binder also showed better fatigue parameter than all the binders within pavement design load frequency range. Results from the AC mix tests verified most of the trends observed from the asphalt binder tests.- Open Access
- 1 November 2018
- Published by Airiti Press, Inc. in International Journal of Pavement Research and Technology
- Vol. 11 (6) , 603-610
Influence of temperature on Jnr values of polymer modified asphalt binders
- 1 November 2018
- Published by Airiti Press, Inc. in International Journal of Pavement Research and Technology
- Vol. 11 (6) , 603-610
Open AccessInfluence of temperature on Jnr values of polymer modified asphalt binders
- 5 June 2018
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 44 (5) , 4141-4149
Prediction of Dynamic Modulus for Elastomer-Modified Asphalt Concrete Mixes at Desert Environment
- 5 June 2018
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 44 (5) , 4141-4149
Prediction of Dynamic Modulus for Elastomer-Modified Asphalt Concrete Mixes at Desert Environment
- 21 May 2015
- Published by Taylor & Francis
- p. 89-95
Effect of polymer type on improving rheological parameters related to rutting resistance of asphalt binders
- 21 May 2015
- Published by Taylor & Francis
- p. 89-95
Effect of polymer type on improving rheological parameters related to rutting resistance of asphalt binders