Shan-Ting Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shan-Ting Zhang has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Bellet
Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP
4 shared publications - David Muñoz-Rojas
Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, 38000 Grenoble, France
4 shared publications - Dongdong Li
Shanghai Advanced Research Institute Zhangjiang Hi‐Tech Park Chinese Academy of Sciences Shanghai China
4 shared publications Hervé Roussel
3 shared publications- Nathanaelle Schneider
Institut Photovoltaïque d’Ile-de-France (IPVF), 18 Boulevard Thomas Gobert, 91120 Palaiseau, France
3 shared publications Xi Zhou
College of Information Science and Electronic Engineering
3 shared publications
Latest Publications
- Open Access
- 9 September 2025
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (18)
Unravel the Role of Atomic Layer Deposited Al 2 O 3 with Different Precursors on Optoelectronic Properties of IGZO Synaptic Transistors
Extending the visible light response of indium gallium zinc oxide (IGZO) phototransistors is crucial for advanced optical neuromorphic computing and artificial visual perception systems. Using water (H 2 O) as the oxidant during atomic layer deposition of aluminum oxide (Al 2 O 3 ) interlayer introduces hydroxyl impurities within IGZO, generating subgap defects that boost photo‐sensitivity (≥10 6 ) and photo‐responsivity (≥0.1 A W −1 ) under 420–620 nm visible light stimuli. The resultant IGZO/Al 2 O 3 (H 2 O) synaptic transistor successfully emulates visible‐light‐driven plasticity. In comparison, the Al 2 O 3 using ozone (O 3 ) as the oxidant is found to produce lesser defects within IGZO but creates a decent amount of negative fixed charges at the interface, improving the contact properties between IGZO and source/drain electrodes. Through innovative experimental design and in‐depth surface analysis, this work offers new insights into the microscopic origin responsible for subgap absorption and contact properties in IGZO/Al 2 O 3 structure, serving as guidelines toward designing scalable synaptic devices with enhanced optoelectronic properties.
- 9 September 2025
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (18)
Open AccessUnravel the Role of Atomic Layer Deposited Al 2 O 3 with Different Precursors on Optoelectronic Properties of IGZO Synaptic Transistors
Extending the visible light response of indium gallium zinc oxide (IGZO) phototransistors is crucial for advanced optical neuromorphic computing and artificial visual perception systems. Using water (H 2 O) as the oxidant during atomic layer deposition of aluminum oxide (Al 2 O 3 ) interlayer introduces hydroxyl impurities within IGZO, generating subgap defects that boost photo‐sensitivity (≥10 6 ) and photo‐responsivity (≥0.1 A W −1 ) under 420–620 nm visible light stimuli. The resultant IGZO/Al 2 O 3 (H 2 O) synaptic transistor successfully emulates visible‐light‐driven plasticity. In comparison, the Al 2 O 3 using ozone (O 3 ) as the oxidant is found to produce lesser defects within IGZO but creates a decent amount of negative fixed charges at the interface, improving the contact properties between IGZO and source/drain electrodes. Through innovative experimental design and in‐depth surface analysis, this work offers new insights into the microscopic origin responsible for subgap absorption and contact properties in IGZO/Al 2 O 3 structure, serving as guidelines toward designing scalable synaptic devices with enhanced optoelectronic properties.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (8) , 1353-1356
Top-Gate Atomic-Layer-Deposited Oxide Semiconductor Transistors With Large Memory Window and Non-Ferroelectric HfO₂ Gate Stack
In this work, we demonstrate a top-gate indium-zinc oxide (IZO) transistor with non-ferroelectric HfO2 gate stack but exhibiting a counterclockwise hysteresis loop with large memory window (MW) of 2.7 V and long retention over 10 years. The gate stack capacitor shows non-ferroelectricity in both P-V and C-V measurements. It is understood that oxygen vacancy formation at the O-poor interface is likely to be the origin of the counterclockwise hysteresis loop because the large MW disappears completely after high-temperature O2 annealing. This work suggests that the origin of the memory characteristics in oxide semiconductor ferroelectric field-effect transistors (FeFETs) need to be carefully justified due to the competing mechanism.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (8) , 1353-1356
Top-Gate Atomic-Layer-Deposited Oxide Semiconductor Transistors With Large Memory Window and Non-Ferroelectric HfO₂ Gate Stack
In this work, we demonstrate a top-gate indium-zinc oxide (IZO) transistor with non-ferroelectric HfO2 gate stack but exhibiting a counterclockwise hysteresis loop with large memory window (MW) of 2.7 V and long retention over 10 years. The gate stack capacitor shows non-ferroelectricity in both P-V and C-V measurements. It is understood that oxygen vacancy formation at the O-poor interface is likely to be the origin of the counterclockwise hysteresis loop because the large MW disappears completely after high-temperature O2 annealing. This work suggests that the origin of the memory characteristics in oxide semiconductor ferroelectric field-effect transistors (FeFETs) need to be carefully justified due to the competing mechanism.
- 19 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 3 (1) , 223-230
Broadband and Persistent Photoconductivity Immune Phototransistors Achieved by a Perovskite/IGZO Heterojunction
- 19 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 3 (1) , 223-230
Broadband and Persistent Photoconductivity Immune Phototransistors Achieved by a Perovskite/IGZO Heterojunction
- 17 October 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (2) , 025108
4H-SiC ultraviolet photodetector array with vertical MSM configuration
The increasing demand for ultraviolet (UV) imaging in extreme conditions, such as high temperatures and strong radiation, has spurred advancements in UV photodetector arrays. Traditional metal–semiconductor–metal (MSM) 4 H-SiC UV photodetector array, with their planar structure and M × N electrode connections, face challenges in circuit design. Our research utilizes a vertical design for building the photodetector array, reducing the connections to just M + N, thereby simplifying the circuit design and signal processing. Utilizing semi-insulating 4 H-SiC wafer and TiN electrodes, we developed an 8 × 8 vertical MSM photodetector array. Tested under a 365 nm light source at 10.5 mW cm−2 and a 5 V bias, the array demonstrated low dark currents, high contrasts under illumination, and a 100% operational yield. With average photo current and dark currents of 1.56 × 10−8 A and 2.94 × 10−13 A, respectively, the average photo-to-dark current ratio exceeded 5 × 104. Our design effectively minimized sneak path currents and achieved a low crosstalk rate of 0.46%, enabling the capture of clear, high-contrast images. This marks a significant advancement in the application of MSM 4 H-SiC UV photodetectors for imaging in extreme conditions.
- 17 October 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (2) , 025108
4H-SiC ultraviolet photodetector array with vertical MSM configuration
The increasing demand for ultraviolet (UV) imaging in extreme conditions, such as high temperatures and strong radiation, has spurred advancements in UV photodetector arrays. Traditional metal–semiconductor–metal (MSM) 4 H-SiC UV photodetector array, with their planar structure and M × N electrode connections, face challenges in circuit design. Our research utilizes a vertical design for building the photodetector array, reducing the connections to just M + N, thereby simplifying the circuit design and signal processing. Utilizing semi-insulating 4 H-SiC wafer and TiN electrodes, we developed an 8 × 8 vertical MSM photodetector array. Tested under a 365 nm light source at 10.5 mW cm−2 and a 5 V bias, the array demonstrated low dark currents, high contrasts under illumination, and a 100% operational yield. With average photo current and dark currents of 1.56 × 10−8 A and 2.94 × 10−13 A, respectively, the average photo-to-dark current ratio exceeded 5 × 104. Our design effectively minimized sneak path currents and achieved a low crosstalk rate of 0.46%, enabling the capture of clear, high-contrast images. This marks a significant advancement in the application of MSM 4 H-SiC UV photodetectors for imaging in extreme conditions.
- 19 August 2022
- Published by Wiley in Advanced Functional Materials
- Vol. 32 (43)
Effective Hydrogenation Strategies to Boost Efficiency over 20% for Crystalline Silicon Solar Cell with Al2O3/Cu2O Passivating Contact
Passivation interlayers such as Al2O3 are required to improve the hole selectivity of dopant‐free passivating contact based on transition metal oxides. For the interlayer to provide low surface recombination as in conventional silicon heterojunctions (SHJs) or tunnel oxide passivated contact (TOPCon) technologies, “hydrogenation” strategies to effectively introduce hydrogen in passivation interlayers while being compatible with transition metal oxides (TMOs) are urgently sought after. In this work, an easy‐to‐implement strategy to successfully incorporate extra hydrogen in the Al2O3 passivation layer is developed. The chemical and field‐effect passivation mechanisms of the extra hydrogen are revealed via comprehensive experimental analyses and density functional theory calculations. By implementing H‐Al2O3 with Cu2O as the hole‐selective rear contact in p‐type crystalline silicon (c‐Si) solar cells, a remarkable efficiency of 20.35% is achieved (fill factor of 84.76%). The study highlights a promising approach to improve the passivation quality of dielectric interlayers and boost the performance of dopant‐free c‐Si solar cells to compete against mainstream c‐Si photovoltaics technologies.
- 19 August 2022
- Published by Wiley in Advanced Functional Materials
- Vol. 32 (43)
Effective Hydrogenation Strategies to Boost Efficiency over 20% for Crystalline Silicon Solar Cell with Al2O3/Cu2O Passivating Contact
Passivation interlayers such as Al2O3 are required to improve the hole selectivity of dopant‐free passivating contact based on transition metal oxides. For the interlayer to provide low surface recombination as in conventional silicon heterojunctions (SHJs) or tunnel oxide passivated contact (TOPCon) technologies, “hydrogenation” strategies to effectively introduce hydrogen in passivation interlayers while being compatible with transition metal oxides (TMOs) are urgently sought after. In this work, an easy‐to‐implement strategy to successfully incorporate extra hydrogen in the Al2O3 passivation layer is developed. The chemical and field‐effect passivation mechanisms of the extra hydrogen are revealed via comprehensive experimental analyses and density functional theory calculations. By implementing H‐Al2O3 with Cu2O as the hole‐selective rear contact in p‐type crystalline silicon (c‐Si) solar cells, a remarkable efficiency of 20.35% is achieved (fill factor of 84.76%). The study highlights a promising approach to improve the passivation quality of dielectric interlayers and boost the performance of dopant‐free c‐Si solar cells to compete against mainstream c‐Si photovoltaics technologies.
- Open Access
- 27 December 2021
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 30 (5) , 552-566
Importance of atmospheric aerosol pollutants on the degradation of Al2O3 encapsulated Al‐doped zinc oxide window layers in solar cells
Atmospheric aerosol pollutants are considered for the first time for the durability evaluation of non‐metallic photovoltaic materials on the example of pristine and Al2O3‐encapsulated Al‐doped zinc oxide (AZO) window layers. The AZO samples were exposed to a varied temperature and humidity cycle, completed or not by a daily deposition of (NH4)2SO4 or NaCl aerosols, typical pollutants in rural and marine environments, respectively. The samples exposed with and without the pollutants were compared after 1 and 2 weeks of the test. Optical transmittance and conductivity significantly degraded only for the samples exposed with the pollutants. Raman spectroscopy, X‐ray diffraction and X‐ray photoelectron spectroscopy evidenced localized dissolution of the AZO film and chemical modification of the Al2O3 encapsulation. The most severe degradation was caused by (NH4)2SO4, which was attributed to the high stability of soluble [Zn (NH3)42+] complexes. The Al2O3 encapsulation improved chemical and physical stability of AZO in the presence of (NH4)2SO4 but not in the presence of NaCl. The latter can be explained by pitting corrosion of Al2O3. Optical transmission curves are coherent with the AZO layer thinning in the presence of NaCl and very localized AZO dissolution (most likely grain boundary etching) in the presence of (NH4)2SO4. The enhanced degradation of encapsulated AZO in the presence of atmospheric aerosol pollutants suggests that they cannot be neglected in the evaluation of barrier protection capacities of novel encapsulates and, more generally, in the outdoor durability assessment of novel photovoltaic materials and devices.
- 27 December 2021
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 30 (5) , 552-566
Open AccessImportance of atmospheric aerosol pollutants on the degradation of Al2O3 encapsulated Al‐doped zinc oxide window layers in solar cells
Atmospheric aerosol pollutants are considered for the first time for the durability evaluation of non‐metallic photovoltaic materials on the example of pristine and Al2O3‐encapsulated Al‐doped zinc oxide (AZO) window layers. The AZO samples were exposed to a varied temperature and humidity cycle, completed or not by a daily deposition of (NH4)2SO4 or NaCl aerosols, typical pollutants in rural and marine environments, respectively. The samples exposed with and without the pollutants were compared after 1 and 2 weeks of the test. Optical transmittance and conductivity significantly degraded only for the samples exposed with the pollutants. Raman spectroscopy, X‐ray diffraction and X‐ray photoelectron spectroscopy evidenced localized dissolution of the AZO film and chemical modification of the Al2O3 encapsulation. The most severe degradation was caused by (NH4)2SO4, which was attributed to the high stability of soluble [Zn (NH3)42+] complexes. The Al2O3 encapsulation improved chemical and physical stability of AZO in the presence of (NH4)2SO4 but not in the presence of NaCl. The latter can be explained by pitting corrosion of Al2O3. Optical transmission curves are coherent with the AZO layer thinning in the presence of NaCl and very localized AZO dissolution (most likely grain boundary etching) in the presence of (NH4)2SO4. The enhanced degradation of encapsulated AZO in the presence of atmospheric aerosol pollutants suggests that they cannot be neglected in the evaluation of barrier protection capacities of novel encapsulates and, more generally, in the outdoor durability assessment of novel photovoltaic materials and devices.
- Open Access
- 1 December 2021
- Published by Elsevier in Cell Reports Physical Science
- Vol. 2 (12)
NiOx/MoOx bilayer as an efficient hole-selective contact in crystalline silicon solar cells
- 1 December 2021
- Published by Elsevier in Cell Reports Physical Science
- Vol. 2 (12)
Open AccessNiOx/MoOx bilayer as an efficient hole-selective contact in crystalline silicon solar cells
- 5 August 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (43) , 435408
Improvement of carrier collection in Si/a-Si:H nanowire solar cells by using hybrid ITO/silver nanowires contacts
Optoelectronic devices based on high aspect ratio nanowires bring new challenges for transparent electrodes, which can be well addressed by using hybrid structures. Here we demonstrate that a composite contact to radial junction nanowire solar cells made of a thin indium-tin oxide (ITO) layer and silver nanowires greatly improves the collection of charge carriers as compared to a single thick ITO layer by reducing the series resistance losses while improving the transparency. The optimization is performed on p-i-n solar cells comprising of dense non-vertical nanowires with a p-doped c-Si core and an ultra-thin a-Si:H absorption layer grown by plasma-enhanced chemical vapor deposition on glass substrates. The optimal hybrid contact developed in this work is demonstrated to increase the solar cell conversion efficiency from 4.3% to 6.6%.
- 5 August 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (43) , 435408
Improvement of carrier collection in Si/a-Si:H nanowire solar cells by using hybrid ITO/silver nanowires contacts
Optoelectronic devices based on high aspect ratio nanowires bring new challenges for transparent electrodes, which can be well addressed by using hybrid structures. Here we demonstrate that a composite contact to radial junction nanowire solar cells made of a thin indium-tin oxide (ITO) layer and silver nanowires greatly improves the collection of charge carriers as compared to a single thick ITO layer by reducing the series resistance losses while improving the transparency. The optimization is performed on p-i-n solar cells comprising of dense non-vertical nanowires with a p-doped c-Si core and an ultra-thin a-Si:H absorption layer grown by plasma-enhanced chemical vapor deposition on glass substrates. The optimal hybrid contact developed in this work is demonstrated to increase the solar cell conversion efficiency from 4.3% to 6.6%.
- 10 April 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (18) , 21036-21044
ALD of ZnO:Ti: Growth Mechanism and Application as an Efficient Transparent Conductive Oxide in Silicon Nanowire Solar Cells
In the quest for replacement of indium-tin-oxide (ITO), Ti-doped zinc oxide (TZO) films have been synthesized by atomic layer deposition (ALD) and applied as n-type transparent conductive oxide (TCO). TZO thin films were obtained from titanium (IV) i-propoxide (TTIP), diethyl zinc and water, by introducing TiO2 growth cycle in a ZnO matrix. Process parameters such as the order of precursor introduction, the cycle ratio and the film thickness were optimized. The as-deposited films were analyzed for their surface morphology, elemental stoichiometry, optoelectronic properties and crystallinity, using a variety of characterization techniques. The growth mechanism was investigated for the first time by in situ quartz-crystal microbalance measurements. It evidenced different insertion modes of titanium depending on the precursor introduction, as well as the etching of Zn-Et surface groups by TTIP. Resistivity as low as 1.2 × 10-3 Ω cm and transmittance > 80% in the visible range were obtained for 72-nm thick films. Finally, the first application of ALD-TZO as TCO was reported. TZO films were successfully implemented as top electrodes in silicon nanowire solar cells. The unique properties of TZO combined with conformal coverage realized by ALD technique make it possible for the cell to show almost flat EQE response, surpassing the bell-like EQE curve seen in devices with sputtered ITO top electrode.
- 10 April 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (18) , 21036-21044
ALD of ZnO:Ti: Growth Mechanism and Application as an Efficient Transparent Conductive Oxide in Silicon Nanowire Solar Cells
In the quest for replacement of indium-tin-oxide (ITO), Ti-doped zinc oxide (TZO) films have been synthesized by atomic layer deposition (ALD) and applied as n-type transparent conductive oxide (TCO). TZO thin films were obtained from titanium (IV) i-propoxide (TTIP), diethyl zinc and water, by introducing TiO2 growth cycle in a ZnO matrix. Process parameters such as the order of precursor introduction, the cycle ratio and the film thickness were optimized. The as-deposited films were analyzed for their surface morphology, elemental stoichiometry, optoelectronic properties and crystallinity, using a variety of characterization techniques. The growth mechanism was investigated for the first time by in situ quartz-crystal microbalance measurements. It evidenced different insertion modes of titanium depending on the precursor introduction, as well as the etching of Zn-Et surface groups by TTIP. Resistivity as low as 1.2 × 10-3 Ω cm and transmittance > 80% in the visible range were obtained for 72-nm thick films. Finally, the first application of ALD-TZO as TCO was reported. TZO films were successfully implemented as top electrodes in silicon nanowire solar cells. The unique properties of TZO combined with conformal coverage realized by ALD technique make it possible for the cell to show almost flat EQE response, surpassing the bell-like EQE curve seen in devices with sputtered ITO top electrode.