Matteo Colli

The EN-HERITAGE project aims to define and prototype an integrated digital platform for the management of virtual models of buildings belonging to the historic built heritage, with a particular focus on slate roofing systems. The platform integrates IoT technologies for environmental monitoring, architectural surveys carried out using laser scanning and photogrammetry, HBIM models, and artificial intelligence algorithms for the analysis of degradation phenomena. The pilot application was conducted on the Albergo dei Poveri complex in Genoa, providing a replicable methodology for the planned conservation of the historic built environment. Preliminary results highlight the effectiveness of the platform in integrating heterogeneous data, providing stakeholders involved in the management of extensive architectural heritage with concrete support for decision-making processes and greater efficiency in planning maintenance and restoration interventions on historic buildings.

With the launch of the National Aeronautics and Space Administration (NASA) Indian Space Research Organisation synthetic aperture radar (NISAR), available open access Earth observation data reach a new milestone with an estimated data rate of ∼70 TB of NISAR science data produced daily. These additional data create many opportunities within the science and user community for new and more in-depth analyses, yet at the same time, most organizations lack the budget, resources, and skills to analyze all this data on-premise. This article introduces concepts on how synthetic aperture radar (SAR) processing software from commercial and open source providers can be coupled with highly scalable cloud processing techniques to digest SAR data at various input levels (from raw to value-added products). Included in this article are examples of the global-scale processing of Sentinel-1 data for InSAR coherence estimation, the input to global biomass modeling, and the routine operational processing of SAR time-series data for national and international near real-time flood mapping. The cloud-scaling Software for Earth big data Processing, Prediction Modeling, and Organization (SEPPO), which is used to meet the processing challenges utilizing Amazon Web Services (AWS) for large volume and operational SAR data processing in complex workflows is introduced.

Monitoring rainfall is becoming increasingly important due to the impacts of climate change. In this context, opportunistic sensing based on satellite microwave links (SMLs) is gaining significant interest for its potential to provide real-time, low-cost, and valuable information. In this work, we deployed a network of 26 SML sensors over a survey territory corresponding to a catchment area of 140 km ² , and the data collected from it were used to train two machine learning (ML) algorithms and a statistical method to predict wet/dry conditions. Additionally, a voting mechanism based on the majority vote of the three classifiers enhances the performance of the individual methods. The results show that ML algorithms are valuable solutions for real-time monitoring of rainfall, even in an extended sensor network. The voting mechanism improves the prediction of low precipitation at the expense of a higher false positive rate.

Opportunistic sensors are increasingly used for rainfall measurement. However, their raw data are collected by a variety of systems that are often not primarily intended for rainfall monitoring, resulting in a plethora of different data formats and a lack of common standards. This hinders the sharing of opportunistic sensing (OS) data, their automated processing, and, at the end, their practical usage and integration into standard observation systems. This paper summarises the experiences of the more than 100 members of the OpenSense Cost Action involved in the OS of rainfall. We review the current practice of collecting and storing precipitation OS data and corresponding metadata, and propose new common guidelines describing the requirements on data and metadata collection, harmonising naming conventions, and defining human-readable and machine readable file formats for data and metadata storage. We focus on three sensors identified by the OpenSense community as prominent representatives of the OS of precipitation: Commercial microwave links (CML): fixed point-to-point radio links mainly used as backhauling connections in telecommunication networks Satellite microwave links (SML): radio links between geostationary Earth orbit (GEO) satellites and ground user terminals. Personal weather stations (PWS): non-professional meteorological sensors owned by citizens. The conventions presented in this paper are primarily designed for storing, handling, and sharing historical time series and do not consider specific requirements for using OS data in real time for operational purposes. The conventions are already now accepted by the ever growing OpenSense community and represent an important step towards automated processing of OS raw data and community development of joint OS software packages.

The amount and the phase of cold-season precipitation accumulating in the upper Saint John River (SJR) basin are critical factors in determining spring runoff, ice jams, and flooding. To study the impact of winter and spring storms on the snowpack in the upper SJR basin, the Saint John River Experiment on Cold Season Storms (SAJESS) was conducted during winter–spring 2020–2021. Here, we provide an overview of the SAJESS study area, field campaign, and data collected. The upper SJR basin represents 41 % of the entire SJR watershed and encompasses parts of the US state of Maine and the Canadian provinces of Quebec and New Brunswick. In early December 2020, meteorological instruments were co-located with an Environment and Climate Change Canada station near Edmundston, New Brunswick. This included a separate weather station for measuring standard meteorological variables, an optical disdrometer, and a micro rain radar. This instrumentation was augmented during an intensive observation period that also included upper-air soundings, surface weather observations, a multi-angle snowflake camera, and macrophotography of solid hydrometeors throughout March and April 2021. During the study, the region experienced a lower-than-average snowpack that peaked at ∼ 65 cm, with a total of 287 mm of precipitation (liquid-equivalent) falling between December 2020 and April 2021, a 21 % lower amount of precipitation than the climatological normal. Observers were present for 13 storms during which they conducted 183 h of precipitation observations and took more than 4000 images of hydrometeors. The inclusion of local volunteers and schools provided an additional 1700 measurements of precipitation amounts across the area. The resulting datasets are publicly available from the Federated Research Data Repository at https://doi.org/10.20383/103.0591 (Thompson et al., 2023). We also include a synopsis of the data management plan and a brief assessment of the rewards and challenges of conducting the field campaign and utilizing community volunteers for citizen science.

In recent years, opportunistic rainfall sensing exploiting Commercial Microwave Links (CML) has become popular for real-time monitoring of rainfall events. Among such systems, Satellite-to-earth Microwave Links (SML) are gaining great interest. An important information to extract from the collected data is whether or not an SML observation corresponds to a rain condition. This letter proposes an online training procedure to keep the algorithms that classify this condition up to date, overcoming the problem of data seasonality. Specifically, we propose to retrain the algorithms after one day of observations by applying a forgetting mechanism, where the oldest data are removed from the training dataset. Data were collected by the Smart Rainfall System (SRS) SML-type sensors located in the city of Genoa (Italy). We compare three classification algorithms: one based on an anomaly detection method and two based on Machine Learning (ML) algorithms. The outcomes of this analysis pave the way for implementing artificial intelligence models on embedded systems with limited resources such as the electronic units of SML sensors, hence reducing the data flow from the peripheral sensor network to the central data acquisition and integration server.

Opportunistic sensors are increasingly used for rainfall measurement. However, their raw data are collected by a variety of systems that are often not primarily intended for rainfall monitoring, resulting in a plethora of different data formats and a lack of common standards. This hinders the sharing of opportunistic sensing (OS) data, their automated processing, and, at the end, their practical usage and integration into standard observation systems. This paper summarises the experiences of the more than 100 members of the OpenSense Cost Action involved in the OS of rainfall. We review the current practice of collecting and storing precipitation OS data and corresponding metadata, and propose new common guidelines describing the requirements on data and metadata collection, harmonising naming conventions, and defining human-readable and machine readable file formats for data and metadata storage. We focus on three sensors identified by the OpenSense community as prominent representatives of the OS of precipitation: Commercial microwave links (CML): fixed point-to-point radio links mainly used as backhauling connections in telecommunication networks Satellite microwave links (SML): radio links between geostationary Earth orbit (GEO) satellites and ground user terminals. Personal weather stations (PWS): non-professional meteorological sensors owned by citizens. The conventions presented in this paper are primarily designed for storing, handling, and sharing historical time series and do not consider specific requirements for using OS data in real time for operational purposes. The conventions are already now accepted by the ever growing OpenSense community and represent an important step towards automated processing of OS raw data and community development of joint OS software packages.

The amount and phase of cold season precipitation accumulating in the upper Saint John River basin are critical factors in determining spring runoff, ice-jams, and flooding in downstream communities. To study the impact of winter and spring storms on the snowpack in the upper Saint John River (SJR) basin, the Saint John River Experiment on Cold Season Storms (SAJESS) utilized meteorological instrumentation, upper air soundings, human observations, and hydrometeor macrophotography during winter/spring 2020–21. Here, we provide an overview of the SAJESS study area, field campaign, and existing data networks surrounding the upper SJR basin. Initially, meteorological instrumentation was co-located with an Environment and Climate Change Canada station near Edmundston, New Brunswick, in early December 2020. This was followed by an intensive observation period that involved manual observations, upper-air soundings, a multi-angle snowflake camera, macrophotography of solid hydrometeors, and advanced automated instrumentation throughout March and April 2021. The resulting datasets include optical disdrometer size and velocity distributions of hydrometeors, micro rain radar output, near-surface meteorological observations, and wind speed, temperature, pressure and precipitation amounts from a K63 Hotplate precipitation gauge, the first one operating in Canada. These data are publicly available from the Federated Research Data Repository at https://doi.org/10.20383/103.0591 (Thompson et al., 2022). We also include a synopsis of the data management plan and data processing, and a brief assessment of the rewards and challenges of utilizing community volunteers for hydro-meteorological citizen science.

In the climate change scenario the world is facing, extreme weather events can lead to increasingly serious disasters. To improve managing the consequent risks, there is a pressing need to have real-time systems that provide accurate monitoring and possibly forecasting which could help to warn people in the affected areas ahead of time and save them from hazards. The oblique earth-space links (OELs) have been used recently as a method for real-time rainfall detection. This technique poses two main issues related to its indirect nature. The first one is the classification of rainy and non-rainy periods. The second one is the determination of the attenuation baseline, which is an essential reference for estimating rainfall intensity along the link. This work focuses mainly on the first issue. Data referring to eighteen rain events were used and have been collected by analyzing a satellite-to-earth link quality and employing a tipping bucket rain gauge (TBRG) properly positioned, used as reference. It reports a comparison among the results obtained by applying four different machine learning (ML) classifiers, namely the support vector machine (SVM), neural network (NN), random forest (RF), and decision tree (DT). Various data arrangements were explored, using a preprocessed version of the TBRG data, and extracting two different sets of characteristics from the microwave link data, containing 6 or 12 different features, respectively. The achieved results demonstrate that the NN classifier has outperformed the other classifiers.

Numerical studies of the wind-induced bias of precipitation measurements assume that turbulence is generated by the interaction of the airflow with the gauge body, while steady and uniform free-stream conditions are imposed. However, wind is turbulent in nature due to the roughness of the site and the presence of obstacles, therefore precipitation gauges are immersed in a turbulent flow. Further to the turbulence generated by the flow-gauge interaction, we investigated the natural free-stream turbulence and its influence on precipitation measurement biases. Realistic turbulence intensity values at the gauge collector height were derived from 3D sonic anemometer measurements. Large Eddy Simulations of the turbulent flow around a chimney-shaped gauge were performed under uniform and turbulent free-stream conditions, using geometrical obstacles upstream of the gauge to provide the desired turbulence intensity. Catch ratios for dry snow particles were obtained using a Lagrangian particle tracking model, and the collection efficiency was calculated based on a suitable particle size distribution. The collection efficiency in turbulent conditions showed stronger undercatch at the investigated wind velocity and snowfall intensity below 10 mm h⁻¹, demonstrating that adjustment curves based on the simplifying assumption of uniform free-stream conditions do not accurately portray the wind-induced bias of snow measurements.