MMM. M. M. G. Prasanga Gayanath Mantilaka

M. M. M. G. Prasanga Gayanath Mantilaka

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


M. M. M. G. Prasanga Gayanath Mantilaka has a total of 151 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fabrication of eco-friendly durable superhydrophobic bamboo surfaces via HDTMS-modified silica nanoparticles

    by V. G. C. Samanmali, A. R. M. A. M. Rathnayake, Nishan Dharmaweera, T. Bandara, R. T. De Silva, M. M. M. G. P. G. Mantilaka

    Bamboo is emerging as a renewable alternative to plastic and wood, with growing adoption in sustainable construction and consumer applications. However, its broader use is hindered by high water absorption and limited environmental durability, particularly in outdoor or high-humidity conditions. In this study, we aim to develop a facile and environmentally friendly method to endow bamboo surfaces with superhydrophobic and self-cleaning properties. To achieve this, a sol–gel composed of tetraethyl orthosilicate (TEOS) and hexadecyltrimethoxysilane (HDTMS) was uniformly applied to polished bamboo surfaces using a brush. This treatment promotes the formation of a dual-scale hierarchical surface, with hydrophobically modified SiO2 nanoparticles aggregating into nano/micro clusters that provide excellent water repellency. The treated bamboo surfaces exhibited outstanding superhydrophobic performance, with a static water contact angle of 159° ± 2° and a sliding angle of just 8° ± 0.5°, enabling efficient water droplet roll-off. The coated surface also exhibited excellent mechanical durability, maintaining a water contact angle above 150° and complete dryness after 50 abrasion cycles under a 50 g load and 35 cycles under a 100 g load, demonstrating robust adhesion and sustained long-term water repellency. In addition, the coating showed excellent chemical stability, retaining consistent hydrophobic behavior across a wide pH range (3–13). The treated bamboo also effectively repelled common contaminants, including mud, sauces, and beverages, thereby reducing surface fouling and maintenance requirements. Overall, the superhydrophobically engineered bamboo represents a sustainable and multifunctional material platform with broad applicability in construction, outdoor furniture, and eco-friendly consumer products.

  • Open Access

    Exploring coconut shell-derived activated carbon black as a green alternative for toner colourants

    by G. D. M. H. Wijewardhana, T. B. N. S. Madugalla, M. M. M. G. P. G. Mantilaka, W. P. S. L. Wijesinghe, W. S. S. Gunathilake

    Coconut shells (CS) are a promising renewable precursor for carbon black synthesis.


  • Open Access

    Optimizing dual hierarchical textured superhydrophobic paper for enhanced writing and printing performance: balancing water resistance and ink adhesion

    by V. G. C. Samanmali, A. R. M. A. M. Rathnayake, Nishan Dharmaweera, T. Bandara, R. T. De Silva, M. M. M. G. P. G. Mantilaka

    Durable superhydrophobic cellulose paper with nano/microstructured SiO2 coating enables both high-quality printing and effortless handwriting, while maintaining excellent water repellency (WCA ∼152°) and self-cleaning properties.


  • Open Access

    Nanoparticle-Enhanced Engine Oils for Automotive Applications: Thermal Conductivity and Heat Capacity Improvements

    by G. D. C. P. Galpaya, M. D. K. M. Gunasena, D. K. A. Induranga, H. V. V. Priyadarshana, S. V. A. A. Indupama, E. R. J. M. D. D. P. Wijesekara, M. I. Ishra, M. M. M. G. P. G. Mantilaka, K. R. Koswattage

    The poor thermal and physical properties of conventional engine oils limit vehicle performance and durability. This research aims to investigate the effect of nanoparticles such as fullerene C60, titanium dioxide (TiO2), iron oxide (Fe2O3), and reduced graphene oxide (rGO) nanoparticles on 10W30 Mobil engine oil. In this study, the effect of nanoparticle concentrations at different mass fractions (0.01, 0.05, and 0.1) was examined within the temperature range 30–120 °C. The nanofluids were prepared using a two-step direct mixing method and thermal properties were measured using a LAMBDA thermal conductivity meter, which uses the transient hot wire method according to the ISO standards. Due to the low concentrations of the nanofluids, surfactants were not required at all, and the stability of the nanofluids was visually monitored over a period of four weeks. Accordingly, the largest improvement in thermal conductivity occurred with TiO2/10W30 at a mass fraction of 0.1 wt.% at 80 °C, and the specific heat capacity improved due to Fe2O3/10W30 addition at a mass fraction of 0.1 at 70 °C; these were 5.8% and 14.4%, respectively, for the base oil. Thermal diffusivity remained largely unaffected by the addition of the nanoparticles, and fullerene C60 showed no significant effect on any thermal property. It was concluded that the thermal properties of the engine oil were considerably enhanced by the added nanoparticles at different weight fractions and temperature values.


  • Open Access

    Effective removal of Pb(II) ions using Fe3O4/MgO adsorbent: A comprehensive study  

    by V. Gurunanthanan, K. B. Wijayaratne, B. S. Dassanayake, P. G. Mantilaka, C. S. Perera

    The effective removal of heavy metal ions, particularly Pb(II), from contaminated water sources remains a pressing environmental concern. This study explores the potential of Fe3O4/MgO nanocomposites as an efficient adsorbent for selective Pb(II) removal. The Fe3O4/MgO nanocomposite was synthesized using a controlled sol-gel method and characterized using various techniques. X-ray diffraction (XRD) analysis confirmed the presence of cubic MgO and cubic Fe3O4. Pb(II) adsorption induced a crystallographic transformation, forming hexagonal Mg(OH)2 crystals, indicating interaction with the adsorbent. Scanning Electron Microscope (SEM) analysis revealed pyramid-like and irregular crystal morphologies. Pyramid-like structures provided a larger surface area and active sites for effective Pb(II) interaction, while irregular crystal particles, representing magnetic Fe3O4, contributed to stability and dispersibility. Vibrating sample magnetometer (VSM) results confirmed superparamagnetic behaviour with a saturation magnetization of 32.02 emu g-1, indicating potential for magnetic separation and recovery in various wastewater treatment applications. Adsorption experiments utilized optimized conditions: an initial concentration of 600 mg L-1, adsorbent dosage of 0.25 g L-1, pH of 7, and 120 minutes of reaction time. The Fe3O4/MgO nanocomposite exhibited exceptional performance with a remarkable 99.98% removal efficiency and a high adsorption capacity of 2399.44 mg g-1. These impressive results underscore the outstanding adsorption potential of the nanocomposite. Adsorption kinetics followed the pseudo-second-order model (R2 = 0.99), confirming suitability for Pb(II) removal. The Freundlich model indicated a heterogeneous surface with different adsorption sites. Overall, the Fe3O4/MgO nanocomposite exhibits potential as a cost-effective, environmentally friendly adsorbent for removing Pb(II) ions, providing a promising solution for water purification and environmental remediation.


  • Slope-specific lateritization of garnet–sillimanite–gneiss cuestas in Matale area, Sri Lanka

    by W. K. G. V. Weligepola, D. M. S. N. Dissanayake, M. M. M. G. P. G. Mantilaka, H. M. T. G. A. Pitawala


  • Open Access

    Comparative Study on the Thermal Properties of Engine Oils and Their Nanofluids Incorporating Fullerene-C60, TiO2 and Fe2O3 at Different Temperatures

    by Chanaka Galpaya, Ashan Induranga, Vimukthi Vithanage, Prasanga Mantilaka, Kaveenga Rasika Koswattage

    The efficiency, durability, and overall performance of a car engine are influenced by several critical factors. The quality and properties of engine oil play a crucial role, and oil is used in internal combustion engines for lubrication and cooling purposes. This research study aimed to compare the impact of fullerene-C60 (99.5%), Fe2O3, and TiO2 nanoparticles on the thermal properties of C.A.L.T.E.X. red engine oil with grades 10W30, 20W40, and 20W50. This study focused on the effect of a nanoparticle concentration of 0.01 wt.% in different engine oil grades at various temperature values of 30–120 °C. The nanofluids were prepared using the two-step direct mixing method, employing a magnetic stirrer and an ultrasonicator, ensuring uniform distribution of nanoparticles in the base fluids. The thermal conductivity, thermal diffusivity, and volumetric heat capacity of the base fluids and nanofluids were measured using the FLUCON LAMBDA thermal conductivity meter. Additionally, flash points were measured using the flash point tester. It was concluded that the thermal properties of TiO2 and Fe2O3 showed considerable enhancement; in contrast, fullerene only showed a 212 °C flash point.


  • Open Access

    Comparative Study on the Thermal Properties of Engine Oils and Their Nanofluids Incorporating Fullerene-C60, TiO2, and Fe2O3 at Different Temperatures

    by Kaveenga Rasika Koswattage, Chanaka Galpaya, Ashan Induranga, Vimukthi Vithanage, M. M. M. G. P. G. Mantilaka

    The efficiency, durability, and overall performance of a car engine are influenced by several critical factors. The quality and properties of engine oil play a crucial role, and oil is used in internal combustion engines for lubrication and cooling purposes. This research study aimed to compare the impact of fullerene-C60 (99.5%), Fe2O3, and TiO2 nanoparticles on the thermal properties of C.A.L.T.E.X. red engine oil with grades 10W30, 20W40, and 20W50. This study focused on the effect of a nanoparticle concentration of 0.01 wt.% in different engine oil grades at various temperature values of 30-120 ℃. The Nanofluids were prepared using the two-step direct mixing method, employing a magnetic stirrer and an ultrasonicator, ensuring uniform distribution of nanoparticles in the base fluids. The thermal conductivity, thermal diffusivity, and volumetric heat capacity of the base fluids and nanofluids were measured using the FLUCON LAMBDA thermal conductivity meter. Additionally, flash points were measured using the flash point tester. It was concluded that the thermal properties of TiO2 and Fe2O3 showed considerable enhancement; in contrast, Fullerene only showed the 212 ℃ flash point.

  • Open Access

    Synthesis of an eco-inspired anticorrosive composite for mild steel applications

    by Anoja Kawsihan, D. M. S. N. Dissanayake, N. P. W. Rathuwadu, H. C. S. Perera, K. E. D. Y. T. Dayananda, K. R. Koswattage, Rajesh Mahadeva, Arnab Ganguly, G. Das, M. M. M. G. P. G. Mantilaka

    We synthesised a polyaniline/mica (Mica–PANI) nanocomposite using naturally occurring muscovite mica by a top-down approach. The developed coating materials were characterised using a different technique to investigate their chemical and structural properties using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). Furthermore, the electrochemical properties of the coating materials were investigated by linear sweep voltammetry (LSV). SEM images elucidate the composite's average particle diameter of the prepared nano-mica, approximately 80 nm. The existence of relevant functional groups and bonding in the prepared Mica–PANI composite material was confirmed by means of XPS and FTIR techniques. Moreover, the synthesised composite with 5% w/w shows high anticorrosion protection, i.e. 84 μm per year, compared to competing materials, including commercial paint and individual raw materials (0.35 mm per year). The anti-corrosive effect occurs mainly due to two opposing effects: the formation of an Fe(OH)3 passive layer on the steel surface by oxidation of surface iron atoms by the PANI and the barrier effect of mica NPs through inhibition of corrosive agents. Therefore, the eco-inspired composite could be an ideal cost-effective coating material to prevent the corrosion of mild steel surfaces.


  • Fabrication of multifunctional smart polyester fabric via electrochemical deposition of ZnO nano-/microhierarchical structures

    by U. G. Mihiri Ekanayake, K. E. D. Y. Taniya Dayananda, Nadeesha Rathuwadu, M. M. M. G. Prasanga G. Mantilaka