Mengyun Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Mengyun Zhang has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Changying Li
5 shared publicationsFuzeng Yang
5 shared publications- Changying Li
Department of Agricultural and Biological Engineering University of Florida Gainesville Florida USA
3 shared publications - Ruoyu Zhang
College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China
3 shared publications Qiong Liu
College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling District, Shaanxi Province, China
2 shared publicationsYingjun Pu
College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling District, Shaanxi Province, China
2 shared publications
Latest Publications
- Open Access
Residual Mulching Film Detection in Seed Cotton Using Line Laser Imaging
Due to the widespread use of mulching film in cotton planting in China, residual mulching film mixed with machine-picked cotton poses a significant hazard to cotton processing. Detecting residual mulching film in seed cotton has become particularly challenging due to the film’s semi-transparent nature. This study constructed an imaging system combining an area array camera and a line scan camera. A detection scheme was proposed that utilized features from both image types. To simulate online detection, samples were placed on a conveyor belt moving at 0.2 m/s, with line lasers at a wavelength of 650 nm as light sources. For area array images, feature extraction was performed to establish a partial least squares discriminant analysis (PLS-DA) model. For line scan images, texture feature analysis was used to build a support vector machine (SVM) classification model. Subsequently, image features from both cameras were merged to construct an SVM model. Experimental results indicated that detection methods based on area array and line scan images had accuracies of 75% and 79%, respectively, while the feature fusion method achieved an accuracy of 83%. This study demonstrated that the proposed method could effectively improve the accuracy of residual mulching film detection in seed cotton, providing a basis for reducing residual mulching film content during processing.
Open AccessResidual Mulching Film Detection in Seed Cotton Using Line Laser Imaging
Due to the widespread use of mulching film in cotton planting in China, residual mulching film mixed with machine-picked cotton poses a significant hazard to cotton processing. Detecting residual mulching film in seed cotton has become particularly challenging due to the film’s semi-transparent nature. This study constructed an imaging system combining an area array camera and a line scan camera. A detection scheme was proposed that utilized features from both image types. To simulate online detection, samples were placed on a conveyor belt moving at 0.2 m/s, with line lasers at a wavelength of 650 nm as light sources. For area array images, feature extraction was performed to establish a partial least squares discriminant analysis (PLS-DA) model. For line scan images, texture feature analysis was used to build a support vector machine (SVM) classification model. Subsequently, image features from both cameras were merged to construct an SVM model. Experimental results indicated that detection methods based on area array and line scan images had accuracies of 75% and 79%, respectively, while the feature fusion method achieved an accuracy of 83%. This study demonstrated that the proposed method could effectively improve the accuracy of residual mulching film detection in seed cotton, providing a basis for reducing residual mulching film content during processing.
- Open Access
- 1 January 2024
- Published by SAGE Publications in Journal of Engineered Fibers and Fabrics
- Vol. 19
Experimental investigation of the ease allowance of clothing and thermal-moisture comfort in exercise based on fuzzy comprehensive evaluation
The level of thermal-moisture comfort experienced by an individual is strongly influenced by the clothing they wear and also influenced by the ease allowance of that clothing. This study aimed to investigate the impact of ease allowances of clothing on thermal-moisture comfort during exercise or movement. Seventeen female subjects were asked to wear sample clothing with different sizes during a designated 5-phase exercise in a climate chamber. Throughout the exercise phases, the temperature and humidity of the microclimate under the clothing were monitored while the subjects provided subjective evaluations of their comfort levels. To account for variation in ease allowances, the 32 experimental repetitions were grouped based on the ease allowance of the clothing worn. The FCE-CRITIC method was then used to determine the variable weights of factors and to compare the thermal-moisture status to the subjective evaluation. Results revealed that humidity was more strongly weighted during RS and RC (i.e., running and recovery phase after exercise) compared to other phases, means that moisture comfort was the main factor driving the clothing comfort sensation within the two phases. The ease allowance of clothing was found to have an impact on the sensations of thermal and moisture comfort during exercise, although this effect was not significant. Furthermore, the study identified the optimum range of ease allowance for thermal-moisture comfort during exercise to be between 6 and 10 cm.
- 1 January 2024
- Published by SAGE Publications in Journal of Engineered Fibers and Fabrics
- Vol. 19
Open AccessExperimental investigation of the ease allowance of clothing and thermal-moisture comfort in exercise based on fuzzy comprehensive evaluation
The level of thermal-moisture comfort experienced by an individual is strongly influenced by the clothing they wear and also influenced by the ease allowance of that clothing. This study aimed to investigate the impact of ease allowances of clothing on thermal-moisture comfort during exercise or movement. Seventeen female subjects were asked to wear sample clothing with different sizes during a designated 5-phase exercise in a climate chamber. Throughout the exercise phases, the temperature and humidity of the microclimate under the clothing were monitored while the subjects provided subjective evaluations of their comfort levels. To account for variation in ease allowances, the 32 experimental repetitions were grouped based on the ease allowance of the clothing worn. The FCE-CRITIC method was then used to determine the variable weights of factors and to compare the thermal-moisture status to the subjective evaluation. Results revealed that humidity was more strongly weighted during RS and RC (i.e., running and recovery phase after exercise) compared to other phases, means that moisture comfort was the main factor driving the clothing comfort sensation within the two phases. The ease allowance of clothing was found to have an impact on the sensations of thermal and moisture comfort during exercise, although this effect was not significant. Furthermore, the study identified the optimum range of ease allowance for thermal-moisture comfort during exercise to be between 6 and 10 cm.
- 1 November 2023
- Published by International Society for Horticultural Science (ISHS) in Acta Horticulturae
- No. 1381,p. 392-400
Internal bruise damage in machine-harvested blueberries
ISHS XXXI International Horticultural Congress (IHC2022): International Symposium on Advances in Berry Crops Internal bruise damage in machine-harvested blueberries
- 1 November 2023
- Published by International Society for Horticultural Science (ISHS) in Acta Horticulturae
- No. 1381,p. 392-400
Internal bruise damage in machine-harvested blueberries
ISHS XXXI International Horticultural Congress (IHC2022): International Symposium on Advances in Berry Crops Internal bruise damage in machine-harvested blueberries
- Open Access
- 27 April 2022
- Published by Springer Nature in Plant Methods
- Vol. 18 (1) , 1-11
Yield estimation of high-density cotton fields using low-altitude UAV imaging and deep learning
Background: China has a unique cotton planting pattern. Cotton is densely planted in alternating wide and narrow rows to increase yield in Xinjiang, China, causing the difficulty in the accurate estimation of cotton yield using remote sensing in such field with branches occluded and overlapped. Results: In this study, unmanned aerial vehicle (UAV) imaging and deep convolutional neural networks (DCNN) were used to estimate densely planted cotton yield. Images of cotton fields were acquired by the UAV at an altitude of 5 m. Cotton bolls were manually harvested and weighed afterwards. Then, a modified DCNN model (CD-SegNet) was constructed for pixel-level segmentation of cotton boll images by reorganizing the encoder-decoder and adding dilated convolutions. Besides, linear regression analysis was employed to build up the relationship between cotton boll pixels ratio and cotton yield. Finally, the estimated yield for four cotton fields were verified by weighing harvested cotton. The results showed that CD-SegNet outperformed the other tested models, including SegNet, support vector machine (SVM), and random forest (RF). The average error in yield estimates of the cotton fields was as low as 6.2%. Conclusions: Overall, the estimation of densely planted cotton yields based on low-altitude UAV imaging is feasible. This study provides a methodological reference for cotton yield estimation in China.
- 27 April 2022
- Published by Springer Nature in Plant Methods
- Vol. 18 (1) , 1-11
Open AccessYield estimation of high-density cotton fields using low-altitude UAV imaging and deep learning
Background: China has a unique cotton planting pattern. Cotton is densely planted in alternating wide and narrow rows to increase yield in Xinjiang, China, causing the difficulty in the accurate estimation of cotton yield using remote sensing in such field with branches occluded and overlapped. Results: In this study, unmanned aerial vehicle (UAV) imaging and deep convolutional neural networks (DCNN) were used to estimate densely planted cotton yield. Images of cotton fields were acquired by the UAV at an altitude of 5 m. Cotton bolls were manually harvested and weighed afterwards. Then, a modified DCNN model (CD-SegNet) was constructed for pixel-level segmentation of cotton boll images by reorganizing the encoder-decoder and adding dilated convolutions. Besides, linear regression analysis was employed to build up the relationship between cotton boll pixels ratio and cotton yield. Finally, the estimated yield for four cotton fields were verified by weighing harvested cotton. The results showed that CD-SegNet outperformed the other tested models, including SegNet, support vector machine (SVM), and random forest (RF). The average error in yield estimates of the cotton fields was as low as 6.2%. Conclusions: Overall, the estimation of densely planted cotton yields based on low-altitude UAV imaging is feasible. This study provides a methodological reference for cotton yield estimation in China.
- Open Access
- 16 April 2021
- Published by Springer Nature in Journal of Experimental & Clinical Cancer Research
- Vol. 40 (1) , 1-2
Correction to: Circ-ASH2L promotes tumor progression by sponging miR-34a to regulate Notch1 in pancreatic ductal adenocarcinoma
An amendment to this paper has been published and can be accessed via the original article.
- 16 April 2021
- Published by Springer Nature in Journal of Experimental & Clinical Cancer Research
- Vol. 40 (1) , 1-2
Open AccessCorrection to: Circ-ASH2L promotes tumor progression by sponging miR-34a to regulate Notch1 in pancreatic ductal adenocarcinoma
An amendment to this paper has been published and can be accessed via the original article.
- 1 October 2020
- Published by Wiley in Journal of Food Process Engineering
- Vol. 43 (12)
Machine learning for detection of walnuts with shriveled kernels by fusing weight and image information
Walnut is one of the popular nut foods with rich nutritional value and medicinal value. However, it is difficult to detect the internal quality of walnuts because of their solid shell. In this study, a novel method was proposed to nondestructively detect the shriveled kernels in shelled walnuts based on the fusion of image and weight information by machine learning. First, the image and weight information of walnut samples was collected using an industrial charge‐coupled device camera and an electronic balance. Then, three kinds of models including partial least squares‐linear discrimination analysis, a support vector machine (SVM) and a particle swarm optimization algorithm with back propagation (PSO‐BP) were established to discriminate walnuts with shriveled kernels. The classifying effectiveness of all methods was comprehensively compared to determine the optimal one. Finally, the testing results were used to evaluate the three models. Under the same conditions, SVM has the best performance. The classification accuracy and average costing time of SVM were 97% and 0.001 s. Overall research demonstrated that the machine learning method based on weight and image information can be used to quickly, accurately and nondestructively detect the walnuts with shriveled kernels.Practical Applications: Nondestructively detection of walnuts has significant value for walnuts processing in practical application. It can allow the walnut industry to provide better‐tasting walnut to the consumers, and thus, improve industry competitiveness and profitability. A strategy for detecting walnuts with shriveled kernels was proposed based on the fusion of weight and image information using machine‐learning algorithms. The SVM model can quickly and accurately classify walnuts with shriveled kernels using information fusion of imaging and weighing. This work is valuable for online sorting of walnuts with shriveled kernel.
- 1 October 2020
- Published by Wiley in Journal of Food Process Engineering
- Vol. 43 (12)
Machine learning for detection of walnuts with shriveled kernels by fusing weight and image information
Walnut is one of the popular nut foods with rich nutritional value and medicinal value. However, it is difficult to detect the internal quality of walnuts because of their solid shell. In this study, a novel method was proposed to nondestructively detect the shriveled kernels in shelled walnuts based on the fusion of image and weight information by machine learning. First, the image and weight information of walnut samples was collected using an industrial charge‐coupled device camera and an electronic balance. Then, three kinds of models including partial least squares‐linear discrimination analysis, a support vector machine (SVM) and a particle swarm optimization algorithm with back propagation (PSO‐BP) were established to discriminate walnuts with shriveled kernels. The classifying effectiveness of all methods was comprehensively compared to determine the optimal one. Finally, the testing results were used to evaluate the three models. Under the same conditions, SVM has the best performance. The classification accuracy and average costing time of SVM were 97% and 0.001 s. Overall research demonstrated that the machine learning method based on weight and image information can be used to quickly, accurately and nondestructively detect the walnuts with shriveled kernels.Practical Applications: Nondestructively detection of walnuts has significant value for walnuts processing in practical application. It can allow the walnut industry to provide better‐tasting walnut to the consumers, and thus, improve industry competitiveness and profitability. A strategy for detecting walnuts with shriveled kernels was proposed based on the fusion of weight and image information using machine‐learning algorithms. The SVM model can quickly and accurately classify walnuts with shriveled kernels using information fusion of imaging and weighing. This work is valuable for online sorting of walnuts with shriveled kernel.
- 1 April 2020
- Published by Elsevier in Biosystems Engineering
- Vol. 192, 159-175
Fully convolutional networks for blueberry bruising and calyx segmentation using hyperspectral transmittance imaging
- 1 April 2020
- Published by Elsevier in Biosystems Engineering
- Vol. 192, 159-175
Fully convolutional networks for blueberry bruising and calyx segmentation using hyperspectral transmittance imaging
- 1 April 2019
- Published by Elsevier in Postharvest Biology and Technology
- Vol. 150, 28-41
Optical properties of blueberry flesh and skin and Monte Carlo multi-layered simulation of light interaction with fruit tissues
- 1 April 2019
- Published by Elsevier in Postharvest Biology and Technology
- Vol. 150, 28-41
Optical properties of blueberry flesh and skin and Monte Carlo multi-layered simulation of light interaction with fruit tissues