Xuan Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Xuan Zhao has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Nansheng Xu
Department of Mechanical Engineering, University of South Carolina
14 shared publicationsXue Li
Department of Mechanical Engineering, University of South Carolina
14 shared publicationsKevin Huang
Department of Mechanical Engineering, University of South Carolina
12 shared publicationsYunhui Gong
Department of Mechanical Engineering, University of South Carolina
11 shared publications- Kevin Huang
University of South Carolina
6 shared publications Q.Z. Cai
3 shared publications
Latest Publications
- 23 February 2014
- Published by The Electrochemical Society in ECS Transactions
- Vol. 58 (12) , 67-74
Exploring Metal-Air Chemistries with A New Solid Oxide Metal-Air Redox Battery
This paper introduces a new class of solid oxide metal air redox batteries, targeting at stationary energy storage. Distinct from traditional liquid based metal-air batteries, this new battery has a completely new system design, which was developed from reversible solid oxide fuel cell (RSOFC) technologies, relying on the conduction of O2-. This all-solid-state battery circumvents the major problems facing conventional metal-air batteries with its unique design: a reversible solid oxide fuel cell is decoupled with a metal-metal oxide containing energy storage bed. This decoupling design allows for an easy exploitation of new metal-air chemistries, for example, tungsten-air and molybdenum-air. Theoretical analysis and experimental results both show that heavy metals like tungsten and molybdenum are promising redox metals to provide higher energy density for the new battery.
- 23 February 2014
- Published by The Electrochemical Society in ECS Transactions
- Vol. 58 (12) , 67-74
Exploring Metal-Air Chemistries with A New Solid Oxide Metal-Air Redox Battery
This paper introduces a new class of solid oxide metal air redox batteries, targeting at stationary energy storage. Distinct from traditional liquid based metal-air batteries, this new battery has a completely new system design, which was developed from reversible solid oxide fuel cell (RSOFC) technologies, relying on the conduction of O2-. This all-solid-state battery circumvents the major problems facing conventional metal-air batteries with its unique design: a reversible solid oxide fuel cell is decoupled with a metal-metal oxide containing energy storage bed. This decoupling design allows for an easy exploitation of new metal-air chemistries, for example, tungsten-air and molybdenum-air. Theoretical analysis and experimental results both show that heavy metals like tungsten and molybdenum are promising redox metals to provide higher energy density for the new battery.
- 31 January 2014
- Published by Wiley
- p. 25-32
Solid Oxide Metal‐Air Batteries for Advanced Energy Storage
- 31 January 2014
- Published by Wiley
- p. 25-32
Solid Oxide Metal‐Air Batteries for Advanced Energy Storage
- 24 October 2013
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 50 (5) , 623-625
Enhanced reversibility and durability of a solid oxide Fe–air redox battery by carbothermic reaction derived energy storage materials
The recently developed solid oxide metal–air redox battery is a new technology capable of high-rate chemistry. Here we report that the performance, reversibility and stability of a solid oxide iron–air redox battery can be significantly improved by nanostructuring energy storage materials from a carbothermic reaction.
- 24 October 2013
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 50 (5) , 623-625
Enhanced reversibility and durability of a solid oxide Fe–air redox battery by carbothermic reaction derived energy storage materials
The recently developed solid oxide metal–air redox battery is a new technology capable of high-rate chemistry. Here we report that the performance, reversibility and stability of a solid oxide iron–air redox battery can be significantly improved by nanostructuring energy storage materials from a carbothermic reaction.
- 16 October 2013
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 1 (47) , 14858-14861
A new solid oxide molybdenum–air redox battery
A new type of rechargeable molybdenum–air battery based on the technologies of reversible solid oxide fuel cells and chemical looping is reported in this study. The reversible solid oxide fuel cell serves as the electrical unit to realize the charging and discharging cycles while a pair of Mo/MoO2 redox couple integrated with the reversible solid oxide fuel cell stores electrical energy via an H2–H2O oxygen shuttle. The specific charge of the new battery reaches 1117 A h per kg-Mo at 550 °C, which is 45% higher than the non-rechargeable Mo–air battery. The corresponding discharge specific energy is 974 W h per kg-Mo with a round trip efficiency of 61.7%. In addition, the new Mo–air redox battery also exhibits 13.9% and 24.5% higher charge density (A h L−1) and energy density (W h L−1) than the state-of-the-art solid oxide Fe–air redox battery, respectively.
- 16 October 2013
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 1 (47) , 14858-14861
A new solid oxide molybdenum–air redox battery
A new type of rechargeable molybdenum–air battery based on the technologies of reversible solid oxide fuel cells and chemical looping is reported in this study. The reversible solid oxide fuel cell serves as the electrical unit to realize the charging and discharging cycles while a pair of Mo/MoO2 redox couple integrated with the reversible solid oxide fuel cell stores electrical energy via an H2–H2O oxygen shuttle. The specific charge of the new battery reaches 1117 A h per kg-Mo at 550 °C, which is 45% higher than the non-rechargeable Mo–air battery. The corresponding discharge specific energy is 974 W h per kg-Mo with a round trip efficiency of 61.7%. In addition, the new Mo–air redox battery also exhibits 13.9% and 24.5% higher charge density (A h L−1) and energy density (W h L−1) than the state-of-the-art solid oxide Fe–air redox battery, respectively.
- 12 September 2013
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 160 (11) , A2085-A2092
A Multi-Physics Model for Solid Oxide Iron-Air Redox Flow Battery: Simulation of Discharge Behavior at High Current Density
A rigorous physics-based mathematical model for a solid oxide iron-air redox flow battery system is presented in this paper. The modeled flow battery system combines a Fe-FeO redox couple as the energy storage unit and a regenerative solid oxide fuel cell as the electrical functioning unit in a 2D axial symmetric geometry. This model was developed from fundamental theories of reaction engineering in which basic transport phenomena and chemical/electrochemical kinetics are included. The model shows good agreement with the experimental data. Simulation results for the chemical, electrochemical and transport behavior of the battery are discussed.
- 12 September 2013
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 160 (11) , A2085-A2092
A Multi-Physics Model for Solid Oxide Iron-Air Redox Flow Battery: Simulation of Discharge Behavior at High Current Density
A rigorous physics-based mathematical model for a solid oxide iron-air redox flow battery system is presented in this paper. The modeled flow battery system combines a Fe-FeO redox couple as the energy storage unit and a regenerative solid oxide fuel cell as the electrical functioning unit in a 2D axial symmetric geometry. This model was developed from fundamental theories of reaction engineering in which basic transport phenomena and chemical/electrochemical kinetics are included. The model shows good agreement with the experimental data. Simulation results for the chemical, electrochemical and transport behavior of the battery are discussed.
- 12 August 2013
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 13 (9) , 4340-4345
Stabilizing Nanostructured Solid Oxide Fuel Cell Cathode with Atomic Layer Deposition
We demonstrate that the highly active but unstable nanostructured intermediate-temperature solid oxide fuel cell cathode, La0.6Sr0.4CoO3-δ (LSCo), can retain its high oxygen reduction reaction (ORR) activity with exceptional stability for 4000 h at 700 °C by overcoating its surfaces with a conformal layer of nanoscale ZrO2 films through atomic layer deposition (ALD). The benefits from the presence of the nanoscale ALD-ZrO2 overcoats are remarkable: a factor of 19 and 18 reduction in polarization area-specific resistance and degradation rate over the pristine sample, respectively. The unique multifunctionality of the ALD-derived nanoscaled ZrO2 overcoats, that is, possessing porosity for O2 access to LSCo, conducting both electrons and oxide-ions, confining thermal growth of LSCo nanoparticles, and suppressing surface Sr-segregation is deemed the key enabler for the observed stable and active nanostructured cathode.
- 12 August 2013
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 13 (9) , 4340-4345
Stabilizing Nanostructured Solid Oxide Fuel Cell Cathode with Atomic Layer Deposition
We demonstrate that the highly active but unstable nanostructured intermediate-temperature solid oxide fuel cell cathode, La0.6Sr0.4CoO3-δ (LSCo), can retain its high oxygen reduction reaction (ORR) activity with exceptional stability for 4000 h at 700 °C by overcoating its surfaces with a conformal layer of nanoscale ZrO2 films through atomic layer deposition (ALD). The benefits from the presence of the nanoscale ALD-ZrO2 overcoats are remarkable: a factor of 19 and 18 reduction in polarization area-specific resistance and degradation rate over the pristine sample, respectively. The unique multifunctionality of the ALD-derived nanoscaled ZrO2 overcoats, that is, possessing porosity for O2 access to LSCo, conducting both electrons and oxide-ions, confining thermal growth of LSCo nanoparticles, and suppressing surface Sr-segregation is deemed the key enabler for the observed stable and active nanostructured cathode.
- 25 July 2013
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 160 (10) , A1716-A1719
Cyclic Durability of a Solid Oxide Fe-Air Redox Battery Operated at 650°C
The recently developed rechargeable solid oxide metal-air redox battery has shown a great potential for applications in mid- to large-scale stationary energy storage. Cyclic durability is one of the most important requirements for stationary energy storage. In this study, we report the cyclic durability of a solid oxide Fe-air redox battery operated at 650°C. The battery was continuously cycled 100 times under a current density of 50 mA/cm2 with rather flat performance, producing an average specific energy of 760 Wh/kg-Fe at a round-trip efficiency of 55.5%. The post-test examination indicated that the performance losses could arise from the fuel-electrode of the battery.
- 25 July 2013
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 160 (10) , A1716-A1719
Cyclic Durability of a Solid Oxide Fe-Air Redox Battery Operated at 650°C
The recently developed rechargeable solid oxide metal-air redox battery has shown a great potential for applications in mid- to large-scale stationary energy storage. Cyclic durability is one of the most important requirements for stationary energy storage. In this study, we report the cyclic durability of a solid oxide Fe-air redox battery operated at 650°C. The battery was continuously cycled 100 times under a current density of 50 mA/cm2 with rather flat performance, producing an average specific energy of 760 Wh/kg-Fe at a round-trip efficiency of 55.5%. The post-test examination indicated that the performance losses could arise from the fuel-electrode of the battery.
- 24 May 2013
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 160 (8) , A1241-A1247
Performance of Solid Oxide Iron-Air Battery Operated at 550°C
“Metal-air” batteries have garnered much attention in recent years due to their high intrinsic specific energy and use of inexhaustible and storage-free oxygen source -air- for the “metal-oxygen” reaction. In this study, we report the performance of a new type of all solid-state “iron-air” battery operated at 550°C. The results show that CeO2 nanoparticles incorporated into the Fe-Fe3O4 redox-couple can improve the specific energy (Wh/kg) and round trip efficiency by 15% and 29%, respectively, over the baseline Fe-Fe3O4 battery. Use of supported Fe-Fe3O4 nanoparticles as the redox couple can increase the specific energy and round-trip efficiency by 13% and 48% over the baseline battery, respectively. However, the nanoparticle redox-couple is susceptible to thermal coarsening under operating conditions, causing cycle stability problem. Future research needs to focus on improving battery's performance and stability by utilizing thin-film electrolyte and high-performance and stable electrodes, and preventing thermal growth of active redox couple nanoparticles. A most recent testing on an optimized battery component has shown promising results: discharge specific energy can reach 91.0% of the maximum theoretical specific energy with a round-trip efficiency of 82.5%.
- 24 May 2013
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 160 (8) , A1241-A1247
Performance of Solid Oxide Iron-Air Battery Operated at 550°C
“Metal-air” batteries have garnered much attention in recent years due to their high intrinsic specific energy and use of inexhaustible and storage-free oxygen source -air- for the “metal-oxygen” reaction. In this study, we report the performance of a new type of all solid-state “iron-air” battery operated at 550°C. The results show that CeO2 nanoparticles incorporated into the Fe-Fe3O4 redox-couple can improve the specific energy (Wh/kg) and round trip efficiency by 15% and 29%, respectively, over the baseline Fe-Fe3O4 battery. Use of supported Fe-Fe3O4 nanoparticles as the redox couple can increase the specific energy and round-trip efficiency by 13% and 48% over the baseline battery, respectively. However, the nanoparticle redox-couple is susceptible to thermal coarsening under operating conditions, causing cycle stability problem. Future research needs to focus on improving battery's performance and stability by utilizing thin-film electrolyte and high-performance and stable electrodes, and preventing thermal growth of active redox couple nanoparticles. A most recent testing on an optimized battery component has shown promising results: discharge specific energy can reach 91.0% of the maximum theoretical specific energy with a round-trip efficiency of 82.5%.
- 23 April 2013
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 49 (47) , 5357-5359
A high energy density all solid-state tungsten–air battery
An all solid-state tungsten–air battery is reported here, which is based on a new metal–air chemistry, featuring decoupled design of electrodes and energy storage. Benefited from higher specific density and better redox kinetics of tungsten, the new tungsten–air battery exhibits roughly higher energy density (W h L−1) than the previously reported iron–air battery.
- 23 April 2013
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 49 (47) , 5357-5359
A high energy density all solid-state tungsten–air battery
An all solid-state tungsten–air battery is reported here, which is based on a new metal–air chemistry, featuring decoupled design of electrodes and energy storage. Benefited from higher specific density and better redox kinetics of tungsten, the new tungsten–air battery exhibits roughly higher energy density (W h L−1) than the previously reported iron–air battery.
- 2 April 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 45 (29) , 113-121
Long Term Stability Study of a Solid Oxide Metal-Air Battery
A new high temperature rechargeable “metal-air” battery has recently been proposed as a new mechanism for grid energy storage. This new battery consists of a regenerative solid oxide fuel cell (RSOFC) and a metal/metal oxide redox couple. In this paper we present the working principle, thermodynamic and kinetic perspectives, and key features of the new battery. Iron is selected as the redox-couple material to store the energy. The long-term test of the battery over 100 cycles at a high rate shows a gradual decline of performance that eventually stabilizes. Post-test analysis indicates that the origin of the degradation is associated with the anode of RSOFC.
- 2 April 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 45 (29) , 113-121
Long Term Stability Study of a Solid Oxide Metal-Air Battery
A new high temperature rechargeable “metal-air” battery has recently been proposed as a new mechanism for grid energy storage. This new battery consists of a regenerative solid oxide fuel cell (RSOFC) and a metal/metal oxide redox couple. In this paper we present the working principle, thermodynamic and kinetic perspectives, and key features of the new battery. Iron is selected as the redox-couple material to store the energy. The long-term test of the battery over 100 cycles at a high rate shows a gradual decline of performance that eventually stabilizes. Post-test analysis indicates that the origin of the degradation is associated with the anode of RSOFC.