Min Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Min Yang has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Zhangxin Chen
Eastern Institute of Technology, Ningbo, China
6 shared publications - Maojie Chai
State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing 102249, China
4 shared publications - Hossein Nourozieh
Currently with Computer Modelling Group Ltd
2 shared publications Linyang Zhang
Chemical and Petroleum Engineering, University of Calgary
2 shared publicationsRundong Qi
University of Calgary, Canada
2 shared publicationsXinran Yu
Chemical and Petroleum Engineering, University of Calgary
2 shared publications
Latest Publications
- 2 April 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (12) , 10395-10420
In-Situ Combustion for Heavy Oil and Oil Sands Recovery: Recent Progress, Field Applications, and Future Perspectives
- 2 April 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (12) , 10395-10420
In-Situ Combustion for Heavy Oil and Oil Sands Recovery: Recent Progress, Field Applications, and Future Perspectives
- 21 June 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (12) , 6928-6943
Integration of machine learning and data analysis for the SAGD production performance with infill wells
- 21 June 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (12) , 6928-6943
Integration of machine learning and data analysis for the SAGD production performance with infill wells
- 29 October 2022
- Published by Elsevier in Applied Energy
- Vol. 328, 120197
A semi-compositional approach to model asphaltene precipitation and deposition in solvent-based bitumen recovery processes
- 29 October 2022
- Published by Elsevier in Applied Energy
- Vol. 328, 120197
A semi-compositional approach to model asphaltene precipitation and deposition in solvent-based bitumen recovery processes
- 15 January 2022
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 211, 110172
Vapor-liquid equilibrium (VLE) prediction for dimethyl ether (DME) and water system in DME injection process with Peng-Robinson equation of state and composition dependent binary interaction coefficient
- 15 January 2022
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 211, 110172
Vapor-liquid equilibrium (VLE) prediction for dimethyl ether (DME) and water system in DME injection process with Peng-Robinson equation of state and composition dependent binary interaction coefficient
- 16 December 2021
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 27 (02) , 1321-1340
Dimethyl Ether as a Novel Solvent for Bitumen Recovery: Mechanisms of Improved Mass Transfer and Energy Efficiency
Summary: A solvent-based thermal recovery process has the advantages of low capital expenditure, less energy consumption, and less greenhouse gas emission. Dimethyl ether (DME), as a renewable solvent, has been considered as a novel additive in the thermal bitumen recovery process. Being soluble in both water and oil phases, DME has the potential to enhance mass transfer and improve oil production. In this work, a phase behavior model of the DME-bitumen-water system is first developed considering DME partitioning between oil and water. A field-scale numerical simulation model with fine gridblocks is developed to investigate the heat and mass transfer mechanisms between DME and bitumen in the interface of a DME vapor chamber. The numerical model is validated with physical experiment results. The close agreement between measured and simulated production profiles indicates that the mechanisms are adequately captured. Meanwhile, various simulation scenarios are performed to evaluate the production performance and the energy efficiency, which is defined as the energy/oil ratio. It is found that the oil production rate in DME injection is 15% higher than that in butane injection at the early stage of production. The solvent penetration depth in DME injection is larger than that in butane injection. This is attributed to the enhanced mass transfer between DME and bitumen caused by the high diffusion of DME in the water phase and preferential partitioning of DME into the oil phase. Furthermore, energy consumption in the warm DME injection process is 48% less than that in warm butane injection and 75% less than that in steam-assisted gravity drainage (SAGD). This is because DME injection can be operated at a lower-temperature condition, leading to less energy transferred to heat reservoir rock/fluids and less heat loss to over/underburden. Therefore, DME is proved to be a technically promising and environmentally friendly solvent to enhance bitumen recovery. The DME-based thermal recovery technique exhibits superior advantages in unlocking poor-quality reservoirs, especially in high water saturation reservoirs and thin reservoirs.
- 16 December 2021
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 27 (02) , 1321-1340
Dimethyl Ether as a Novel Solvent for Bitumen Recovery: Mechanisms of Improved Mass Transfer and Energy Efficiency
Summary: A solvent-based thermal recovery process has the advantages of low capital expenditure, less energy consumption, and less greenhouse gas emission. Dimethyl ether (DME), as a renewable solvent, has been considered as a novel additive in the thermal bitumen recovery process. Being soluble in both water and oil phases, DME has the potential to enhance mass transfer and improve oil production. In this work, a phase behavior model of the DME-bitumen-water system is first developed considering DME partitioning between oil and water. A field-scale numerical simulation model with fine gridblocks is developed to investigate the heat and mass transfer mechanisms between DME and bitumen in the interface of a DME vapor chamber. The numerical model is validated with physical experiment results. The close agreement between measured and simulated production profiles indicates that the mechanisms are adequately captured. Meanwhile, various simulation scenarios are performed to evaluate the production performance and the energy efficiency, which is defined as the energy/oil ratio. It is found that the oil production rate in DME injection is 15% higher than that in butane injection at the early stage of production. The solvent penetration depth in DME injection is larger than that in butane injection. This is attributed to the enhanced mass transfer between DME and bitumen caused by the high diffusion of DME in the water phase and preferential partitioning of DME into the oil phase. Furthermore, energy consumption in the warm DME injection process is 48% less than that in warm butane injection and 75% less than that in steam-assisted gravity drainage (SAGD). This is because DME injection can be operated at a lower-temperature condition, leading to less energy transferred to heat reservoir rock/fluids and less heat loss to over/underburden. Therefore, DME is proved to be a technically promising and environmentally friendly solvent to enhance bitumen recovery. The DME-based thermal recovery technique exhibits superior advantages in unlocking poor-quality reservoirs, especially in high water saturation reservoirs and thin reservoirs.
- 5 November 2020
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (46) , 20504-20514
Quasi-Continuum Water Flow under Nanoconfined Conditions: Coupling the Effective Viscosity and the Slip Length
- 5 November 2020
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (46) , 20504-20514
Quasi-Continuum Water Flow under Nanoconfined Conditions: Coupling the Effective Viscosity and the Slip Length
- 13 March 2017
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 31 (4) , 3546-3556
An Improved Kinetics Model for In Situ Combustion of Pre-Steamed Oil Sands
- 13 March 2017
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 31 (4) , 3546-3556
An Improved Kinetics Model for In Situ Combustion of Pre-Steamed Oil Sands