Chi-Jui Chung
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chi-Jui Chung has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Ray T. Chen
Department of Electrical and Computer Engineering, The University of Texas at Austin, Austin, USA
10 shared publications - Xiaochuan Xu
Harbin Institute of Technology
8 shared publications - Hai Yan
The Univ. of Texas at Austin (United States)
6 shared publications Ray T. Chen
Department of Electrical and Computer Engineering, University of Texas at Austin, 10100 Burnet Rd. Austin, TX 78758, USA
6 shared publications- Zeyu Pan
Electrical and Computer Engineering, University of Texas at Austin, Austin, Texas United States
6 shared publications Ali Rostamian
Microelectronic Research Center, Department of Electronical and Computer Engineering, The University of Texas 1 , Austin, Texas 78758, USA
4 shared publications
Latest Publications
- 30 May 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (11) , 2883-2886
On-chip Fourier transform spectrometer on silicon-on-sapphire
We designed and experimentally demonstrated an on-chip Fourier transform spectrometer on silicon-on-sapphire. The spectrometer comprises an array of twelve Mach–Zehnder interferometers (MZIs) with linearly increasing optical path delays between MZI arms. The propagation loss of 5.2 dB/cm has been experimentally observed for the strip waveguides. The retrieval of an optical spectrum is demonstrated with an inter-band cascade laser centered at 3.3 μm. The resolution is better than .- 30 May 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (11) , 2883-2886
On-chip Fourier transform spectrometer on silicon-on-sapphire
We designed and experimentally demonstrated an on-chip Fourier transform spectrometer on silicon-on-sapphire. The spectrometer comprises an array of twelve Mach–Zehnder interferometers (MZIs) with linearly increasing optical path delays between MZI arms. The propagation loss of 5.2 dB/cm has been experimentally observed for the strip waveguides. The retrieval of an optical spectrum is demonstrated with an inter-band cascade laser centered at 3.3 μm. The resolution is better than .- 10 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 25 (3) , 1-8
Subwavelength Grating Metamaterial Racetrack Resonator for Sensing and Modulation
Subwavelength grating metamaterial racetrack ring resonator (SGMRTR) increases the coupling strength between the bus waveguide and the ring resonator and thus better extinction ratio can be achieved. In this paper, we summarized our recent work on SGMRTRs. We show that with the improved extinction ratio, the intrinsic detection limit of refractive index sensors can be pushed closer to the theoretical limit. We have also demonstrated the first high speed optical modulator based on electro-optic polymer infiltrated subwavelength grating metamaterial waveguide ring resonator with measured 3-dB bandwidth of 41.4 GHz. The power consumption for digital communication is estimated to be 2.55 fJ/bit.
- 10 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 25 (3) , 1-8
Subwavelength Grating Metamaterial Racetrack Resonator for Sensing and Modulation
Subwavelength grating metamaterial racetrack ring resonator (SGMRTR) increases the coupling strength between the bus waveguide and the ring resonator and thus better extinction ratio can be achieved. In this paper, we summarized our recent work on SGMRTRs. We show that with the improved extinction ratio, the intrinsic detection limit of refractive index sensors can be pushed closer to the theoretical limit. We have also demonstrated the first high speed optical modulator based on electro-optic polymer infiltrated subwavelength grating metamaterial waveguide ring resonator with measured 3-dB bandwidth of 41.4 GHz. The power consumption for digital communication is estimated to be 2.55 fJ/bit.
- 4 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10923, 109230O
On-chip Fourier transform spectrometer on silicon-on-sapphire (Conference Presentation)
The temperature of earth depends upon the balance between the energy enterring and leaving the planet. The dynamic balance has been broken by the drastical increase of greenhouse gases generated by human activities during the past 150 years. Thus, monitoring of the global emission of greenhouse gases is urgent for human beings. Fourier transform spectroscopy (FTS) in infrared wavelength range is an effective measure for this purpose. An infrared spectrum represents a fingerprint of a material with absorption peaks corresponding to the vibration of the bonds of the atoms making up the material. Because each material is a unique combination of atoms, no two compounds produce the exact same infrared spectrum. Therefore, infrared spectroscopy can result in a positive identification (qualitative analysis) of every kind of materials. In addition, the size of the peaks in the spectrum is a direct indication of the amount of material present. Compared to dispersive optics or filter based spectroscopy approaches, FTS has a few significant advantages, such as high throughput, high signal-to-noise ratio, and high sensitivity. However, the size, weight and free space optics components make FTS a laboratory only instrument demanding extensive human involvement. In this paper, we report a demonstration of an on-chip Fourier transform spectrometer near 3.3 μm wavelength on silicon-on-sapphire. Propagation loss of 5.2 dB/cm has been experimentally demonstrated for strip waveguides. The on-chip FTS comprises an array of Mach–Zehnder interferometers (MZIs) with linearly increased optical path differences. The recovery of the spectrum of an inter-band cascaded laser has been demonstrated.
- 4 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10923, 109230O
On-chip Fourier transform spectrometer on silicon-on-sapphire (Conference Presentation)
The temperature of earth depends upon the balance between the energy enterring and leaving the planet. The dynamic balance has been broken by the drastical increase of greenhouse gases generated by human activities during the past 150 years. Thus, monitoring of the global emission of greenhouse gases is urgent for human beings. Fourier transform spectroscopy (FTS) in infrared wavelength range is an effective measure for this purpose. An infrared spectrum represents a fingerprint of a material with absorption peaks corresponding to the vibration of the bonds of the atoms making up the material. Because each material is a unique combination of atoms, no two compounds produce the exact same infrared spectrum. Therefore, infrared spectroscopy can result in a positive identification (qualitative analysis) of every kind of materials. In addition, the size of the peaks in the spectrum is a direct indication of the amount of material present. Compared to dispersive optics or filter based spectroscopy approaches, FTS has a few significant advantages, such as high throughput, high signal-to-noise ratio, and high sensitivity. However, the size, weight and free space optics components make FTS a laboratory only instrument demanding extensive human involvement. In this paper, we report a demonstration of an on-chip Fourier transform spectrometer near 3.3 μm wavelength on silicon-on-sapphire. Propagation loss of 5.2 dB/cm has been experimentally demonstrated for strip waveguides. The on-chip FTS comprises an array of Mach–Zehnder interferometers (MZIs) with linearly increased optical path differences. The recovery of the spectrum of an inter-band cascaded laser has been demonstrated.
- Open Access
- 1 January 2019
- Published by AIP Publishing in AIP Advances
- Vol. 9 (1) , 015303
InP-based polarization rotator-splitter for mid-infrared photonic integration circuits
We design and experimentally demonstrate the propagation loss of waveguides and the operation of a single-step etched polarization rotator-splitter (PRS) in low index contrast InGaAs-InP material system at 6.15 μm. Propagation losses 4.19 dB/cm for TM mode and 3.25 dB/cm for TE mode are measured. The designed PRS can achieve near 100% conversion efficiency. This study enables the possibility of monolithic integration of quantum cascade devices with TM-polarized characteristics and TE-guiding two-dimensional slotted photonic crystal waveguide gas sensors for on-chip monolithic absorption spectroscopy.
- 1 January 2019
- Published by AIP Publishing in AIP Advances
- Vol. 9 (1) , 015303
Open AccessInP-based polarization rotator-splitter for mid-infrared photonic integration circuits
We design and experimentally demonstrate the propagation loss of waveguides and the operation of a single-step etched polarization rotator-splitter (PRS) in low index contrast InGaAs-InP material system at 6.15 μm. Propagation losses 4.19 dB/cm for TM mode and 3.25 dB/cm for TE mode are measured. The designed PRS can achieve near 100% conversion efficiency. This study enables the possibility of monolithic integration of quantum cascade devices with TM-polarized characteristics and TE-guiding two-dimensional slotted photonic crystal waveguide gas sensors for on-chip monolithic absorption spectroscopy.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (16) , 3418-3426
Wideband Multi-Arm Bowtie Antenna for Millimeter Wave Electro-Optic Sensors and Receivers
We propose and demonstrate a novel design of a multi arm bowtie antenna (MABA) able to provide wideband field enhancement (FE). FE is a looked-for parameter of antennas in integrated electro-optic (EO) communication and sensing applications. In the proposed MABA, the paralleled arms with different lengths and flare angles provide multiple resonance frequencies. By tailoring these resonance frequencies adequately close to each other, a wide range of frequencies with high FE is achieved and the intrinsic limitation of conventional bowtie antennas in this regard is overcome. The proposed MABA is designed at the center frequency of 66.2 GHz and fabricated on a silicon on insulator (SOI) substrate with 1.69 mm × 0.21 mm dimensions. Simulation and measurement results show about 40° beam width and 63.4 dB FE peak with 27 GHz bandwidth which is 3 times larger than the bandwidth of a conventional bowtie antenna (BA), as the most commonly used antenna for this application, on the same substrate. A figure of merit (FoM) is proposed to study performance of antennas for integrated EO applications approximately independent from the effects of substrate, operating frequency, and optical parts. The FoM is calculated and a comparison is presented for different state-of-the-art antennas in literature showing 2.28 times better performance of the proposed MABA.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (16) , 3418-3426
Wideband Multi-Arm Bowtie Antenna for Millimeter Wave Electro-Optic Sensors and Receivers
We propose and demonstrate a novel design of a multi arm bowtie antenna (MABA) able to provide wideband field enhancement (FE). FE is a looked-for parameter of antennas in integrated electro-optic (EO) communication and sensing applications. In the proposed MABA, the paralleled arms with different lengths and flare angles provide multiple resonance frequencies. By tailoring these resonance frequencies adequately close to each other, a wide range of frequencies with high FE is achieved and the intrinsic limitation of conventional bowtie antennas in this regard is overcome. The proposed MABA is designed at the center frequency of 66.2 GHz and fabricated on a silicon on insulator (SOI) substrate with 1.69 mm × 0.21 mm dimensions. Simulation and measurement results show about 40° beam width and 63.4 dB FE peak with 27 GHz bandwidth which is 3 times larger than the bandwidth of a conventional bowtie antenna (BA), as the most commonly used antenna for this application, on the same substrate. A figure of merit (FoM) is proposed to study performance of antennas for integrated EO applications approximately independent from the effects of substrate, operating frequency, and optical parts. The FoM is calculated and a comparison is presented for different state-of-the-art antennas in literature showing 2.28 times better performance of the proposed MABA.
- 17 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 24 (6) , 1-10
Electro-Optic Ripple-Carry Adder in Integrated Silicon Photonics for Optical Computing
Photonic integrated circuits (PICs) with compact size and low power consumption have opened the possibility of realization of ultrahigh-speed and energy-efficient optical computing in an integrated system that may be comparable to CMOS-based electrical integrated circuits in many aspects. Directed logic is an innovative paradigm that can make full use of the advantages of electronics and photonics for optical computing. In this paper, we propose various designs of directed-logic-based electro-optic ripple-carry adders in integrated silicon photonics, which replace the electrical components in the critical path using optical counterparts. All control signals are applied simultaneously through ultralow-power microdisk modulators so that the propagation delay could be reduced significantly. A two-bit thermal-optic full adder based on microdisk modulators is demonstrated as a proof of concept along with a projection of high-speed performance. The proposed electro-optic full adder paves the way to future low-power-consumption and large-bandwidth optical computing in integrated silicon photonics.
- 17 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 24 (6) , 1-10
Electro-Optic Ripple-Carry Adder in Integrated Silicon Photonics for Optical Computing
Photonic integrated circuits (PICs) with compact size and low power consumption have opened the possibility of realization of ultrahigh-speed and energy-efficient optical computing in an integrated system that may be comparable to CMOS-based electrical integrated circuits in many aspects. Directed logic is an innovative paradigm that can make full use of the advantages of electronics and photonics for optical computing. In this paper, we propose various designs of directed-logic-based electro-optic ripple-carry adders in integrated silicon photonics, which replace the electrical components in the critical path using optical counterparts. All control signals are applied simultaneously through ultralow-power microdisk modulators so that the propagation delay could be reduced significantly. A two-bit thermal-optic full adder based on microdisk modulators is demonstrated as a proof of concept along with a projection of high-speed performance. The proposed electro-optic full adder paves the way to future low-power-consumption and large-bandwidth optical computing in integrated silicon photonics.
- 22 March 2018
- Published by Optica Publishing Group in Photonics Research
- Vol. 6 (4) , 254-276
Mid-infrared silicon photonic waveguides and devices [Invited]
Silicon has been the material of choice of the photonics industry over the last decade due to its easy integration with silicon electronics, high index contrast, small footprint, and low cost, as well as its optical transparency in the near-infrared and parts of mid-infrared (MIR) wavelengths (from 1.1 to 8 μm). While considerations of micro- and nano-fabrication-induced device parameter deviations and a higher-than-desirable propagation loss still serve as a bottleneck in many on-chip data communication applications, applications as sensors do not require similar stringent controls. Photonic devices on chips are increasingly being demonstrated for chemical and biological sensing with performance metrics rivaling benchtop instruments and thus promising the potential of portable, handheld, and wearable monitoring of various chemical and biological analytes. In this paper, we review recent advances in MIR silicon photonics research. We discuss the pros and cons of various platforms, the fabrication procedures for building such platforms, and the benchmarks demonstrated so far, together with their applications. Novel device architectures and improved fabrication techniques have paved a viable way for realizing low-cost, high-density, multi-function integrated devices in the MIR. These advances are expected to benefit several application domains in the years to come, including communication networks, sensing, and nonlinear systems.
- 22 March 2018
- Published by Optica Publishing Group in Photonics Research
- Vol. 6 (4) , 254-276
Mid-infrared silicon photonic waveguides and devices [Invited]
Silicon has been the material of choice of the photonics industry over the last decade due to its easy integration with silicon electronics, high index contrast, small footprint, and low cost, as well as its optical transparency in the near-infrared and parts of mid-infrared (MIR) wavelengths (from 1.1 to 8 μm). While considerations of micro- and nano-fabrication-induced device parameter deviations and a higher-than-desirable propagation loss still serve as a bottleneck in many on-chip data communication applications, applications as sensors do not require similar stringent controls. Photonic devices on chips are increasingly being demonstrated for chemical and biological sensing with performance metrics rivaling benchtop instruments and thus promising the potential of portable, handheld, and wearable monitoring of various chemical and biological analytes. In this paper, we review recent advances in MIR silicon photonics research. We discuss the pros and cons of various platforms, the fabrication procedures for building such platforms, and the benchmarks demonstrated so far, together with their applications. Novel device architectures and improved fabrication techniques have paved a viable way for realizing low-cost, high-density, multi-function integrated devices in the MIR. These advances are expected to benefit several application domains in the years to come, including communication networks, sensing, and nonlinear systems.
- Open Access
- 12 February 2018
- Published by AIP Publishing in Applied Physics Letters
- Vol. 112 (7) , 071104
On-chip optical true time delay lines featuring one-dimensional fishbone photonic crystal waveguide
In this paper, we present on-chip optical true time delay lines based on slow light one-dimensional (1D) fishbone photonic crystal waveguides (FPCWs). The structural slow light is generated by modulating the index guided optical mode with periodically arranged sidewalls along the propagation direction. Due to the reduced mode overlap with the rough etched surface, the propagation loss of the 1D FPCW is significantly reduced compared to the two-dimensional photonic crystal waveguide. A delay time of 65 ps/mm is observed experimentally.
- 12 February 2018
- Published by AIP Publishing in Applied Physics Letters
- Vol. 112 (7) , 071104
Open AccessOn-chip optical true time delay lines featuring one-dimensional fishbone photonic crystal waveguide
In this paper, we present on-chip optical true time delay lines based on slow light one-dimensional (1D) fishbone photonic crystal waveguides (FPCWs). The structural slow light is generated by modulating the index guided optical mode with periodically arranged sidewalls along the propagation direction. Due to the reduced mode overlap with the rough etched surface, the propagation loss of the 1D FPCW is significantly reduced compared to the two-dimensional photonic crystal waveguide. A delay time of 65 ps/mm is observed experimentally.
- 1 January 2018
- Published by Optica Publishing Group
- p. ATh1O.4
Parts-Per-Billion Carbon Monoxide Sensing in Silicon-on-Sapphire Mid-Infrared Photonic Crystal Waveguides
We experimentally detect 3 ppm carbon monoxide via optical absorbance in a 1mm long slotted photonic crystal waveguide in silicon-on-sapphire at wavelength λ= 4.55µm. Feasibility of low ppb sensing will be shown by design modifications.
- 1 January 2018
- Published by Optica Publishing Group
- p. ATh1O.4
Parts-Per-Billion Carbon Monoxide Sensing in Silicon-on-Sapphire Mid-Infrared Photonic Crystal Waveguides
We experimentally detect 3 ppm carbon monoxide via optical absorbance in a 1mm long slotted photonic crystal waveguide in silicon-on-sapphire at wavelength λ= 4.55µm. Feasibility of low ppb sensing will be shown by design modifications.
- 1 January 2018
- Published by Optica Publishing Group
- p. SM1I.2
High-speed silicon-organic hybrid modulator enabled by sub-wavelength grating waveguide ring resonator
We present a high-speed modulator based on electro-optic polymer infiltrated sub-wavelength grating waveguide ring resonator. A 3-dB small signal modulation bandwidth of 41.36 GHz has been demonstrated.
- 1 January 2018
- Published by Optica Publishing Group
- p. SM1I.2
High-speed silicon-organic hybrid modulator enabled by sub-wavelength grating waveguide ring resonator
We present a high-speed modulator based on electro-optic polymer infiltrated sub-wavelength grating waveguide ring resonator. A 3-dB small signal modulation bandwidth of 41.36 GHz has been demonstrated.