Luiz Henrique Antunes Rodrigues
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Luiz Henrique Antunes Rodrigues has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Monique Pires Gravina de Oliveira
Embrapa Digital Agriculture, Campinas 13083-886, SP, Brazil
6 shared publications - Felipe Ferreira Bocca
Universidade Estadual de Campinas, Brasil
5 shared publications Felipe Ferreira Bocca
3 shared publications- Irenilza de Alencar Nääs
Graduate Program in Production Engineering, Universidade Paulista, São Paulo 04026-002, SP, Brazil
3 shared publications Carlos Alberto Alves Meira
Embrapa Informática Agropecuária, Cx. P. 6041, CEP 13083-970, Campinas, SP, Brazil
2 shared publications- Carlos Alberto Alves Meira
Embrapa Informática Agropecuária
2 shared publications
Latest Publications
- Open Access
- 20 May 2024
- Published by FapUNIFESP (SciELO) in SciELO Preprints
Tomato plants’ growth observations obtained from multiple sources in a production-like setting
This dataset contains observations of tomato growth in a production-like setting, at research greenhouses. Two tomato plants in each of three growth cycles were continuously monitored: pictures were taken every other day from above and from a side view, while a weighting system was used to record changes in weight of the plant and of water in the substrate. Additionally, other plants in the environment were subjected to destructive analysis, in general every two weeks, to quantify aspects of growth that required destructive measurements, such as dry weight and plant leaf area. These records are also included in the dataset, including the scans of digitized leaves. Plant samples destined to destructive measurements also had their pictures taken before removal. In total, 618 photos of monitored and removed plants were annotated, and masks of leaf, fruit and mature fruit areas in pictures are also provided. The dataset also includes measurements of photosynthetically active radiation and air temperature recorded inside the greenhouses by two different sets of sensors during the growth cycles. The dataset allows for applications regarding growth monitoring, simulation modeling, and computer vision tasks.
- 20 May 2024
- Published by FapUNIFESP (SciELO) in SciELO Preprints
Open AccessTomato plants’ growth observations obtained from multiple sources in a production-like setting
This dataset contains observations of tomato growth in a production-like setting, at research greenhouses. Two tomato plants in each of three growth cycles were continuously monitored: pictures were taken every other day from above and from a side view, while a weighting system was used to record changes in weight of the plant and of water in the substrate. Additionally, other plants in the environment were subjected to destructive analysis, in general every two weeks, to quantify aspects of growth that required destructive measurements, such as dry weight and plant leaf area. These records are also included in the dataset, including the scans of digitized leaves. Plant samples destined to destructive measurements also had their pictures taken before removal. In total, 618 photos of monitored and removed plants were annotated, and masks of leaf, fruit and mature fruit areas in pictures are also provided. The dataset also includes measurements of photosynthetically active radiation and air temperature recorded inside the greenhouses by two different sets of sensors during the growth cycles. The dataset allows for applications regarding growth monitoring, simulation modeling, and computer vision tasks.
- Open Access
- 6 February 2024
- Published by FapUNIFESP (SciELO) in SciELO Preprints
Kalman Filters in crop models: old experiences in new contexts
Data assimilation has been widely used for improvement of crop models’ estimates, for example to incorporate the effects of external events or compensate calibration errors in large areas. The term describes multiple approaches for those who want to take advantage of satellite imagery to reduce uncertainty or improve accuracy of model estimates. Kalman Filters are among the most used methods for achieving these goals. But their use in new contexts, i.e., from open field to protected environments, requires untangling aspects of the pipeline that are often performed in many different ways without guidelines, such as which variables to assimilate or how to ascribe uncertainty to observations or model estimates. This study is then divided in two parts. In the first, we review details on how uncertainty is ascribed on crop model estimates and in observations for applications of the Kalman Filter and three variations of the method, i.e., the Extended, Unscented and Ensemble, as well as which state variables are often updated and the frequency with which assimilation may occur, as well as how these aspects are connected to each other. In the second part, we apply different approaches from the reviewed literature in a greenhouse tomato crop model. We use artificial data with controlled noise levels as well as artificial data generated by simulation using other tomato crop model. We assess the impacts of using different methods and different approaches for ascribing uncertainty in model estimates and in observations, by assimilating artificial observations of fruit and of mature fruit biomass. We note that covariances should not be fixed values, that there are trade-offs between ascribing model uncertainty to the state itself and to other elements of the process, that observation covariance may have been considered disproportionality higher when using some ensemble generation approaches in the EnKF, and that bias in model estimates may lead to worse outcomes even when observations are high-quality ones. While we discussed aspects that should be considered in a new environment, many of them are also important for field crops, and we concluded assimilation should follow an assessment of which variables could be useful for assimilation.
- 6 February 2024
- Published by FapUNIFESP (SciELO) in SciELO Preprints
Open AccessKalman Filters in crop models: old experiences in new contexts
Data assimilation has been widely used for improvement of crop models’ estimates, for example to incorporate the effects of external events or compensate calibration errors in large areas. The term describes multiple approaches for those who want to take advantage of satellite imagery to reduce uncertainty or improve accuracy of model estimates. Kalman Filters are among the most used methods for achieving these goals. But their use in new contexts, i.e., from open field to protected environments, requires untangling aspects of the pipeline that are often performed in many different ways without guidelines, such as which variables to assimilate or how to ascribe uncertainty to observations or model estimates. This study is then divided in two parts. In the first, we review details on how uncertainty is ascribed on crop model estimates and in observations for applications of the Kalman Filter and three variations of the method, i.e., the Extended, Unscented and Ensemble, as well as which state variables are often updated and the frequency with which assimilation may occur, as well as how these aspects are connected to each other. In the second part, we apply different approaches from the reviewed literature in a greenhouse tomato crop model. We use artificial data with controlled noise levels as well as artificial data generated by simulation using other tomato crop model. We assess the impacts of using different methods and different approaches for ascribing uncertainty in model estimates and in observations, by assimilating artificial observations of fruit and of mature fruit biomass. We note that covariances should not be fixed values, that there are trade-offs between ascribing model uncertainty to the state itself and to other elements of the process, that observation covariance may have been considered disproportionality higher when using some ensemble generation approaches in the EnKF, and that bias in model estimates may lead to worse outcomes even when observations are high-quality ones. While we discussed aspects that should be considered in a new environment, many of them are also important for field crops, and we concluded assimilation should follow an assessment of which variables could be useful for assimilation.
- Open Access
- 8 November 2023
- Published by Sociedade Brasileira de Computação
- p. 40-47
Data assimilation in crop models: old experiences in new contexts
Assimilação de dados é uma técnica que tem sido amplamente utilizada para melhorar as estimativas de modelos de crescimento de plantas, por exemplo, para incorporar os efeitos de eventos externos. Existem muitas abordagens bem estabelecidas para realizar assimilação com imagens de satélite, mas seu uso método em novos contextos, como cultivo protegido, requer a exploração de aspectos da metodologia que não estão tão bem estabelecidos para estes casos. Neste trabalho, avaliamos os impactos de diferentes níveis de incerteza associados às observações, realizando assimilação de dados em um modelo de crescimento de tomateiros, com observações artificiais de biomassa de frutos e frutos maduros.
- 8 November 2023
- Published by Sociedade Brasileira de Computação
- p. 40-47
Open AccessData assimilation in crop models: old experiences in new contexts
Assimilação de dados é uma técnica que tem sido amplamente utilizada para melhorar as estimativas de modelos de crescimento de plantas, por exemplo, para incorporar os efeitos de eventos externos. Existem muitas abordagens bem estabelecidas para realizar assimilação com imagens de satélite, mas seu uso método em novos contextos, como cultivo protegido, requer a exploração de aspectos da metodologia que não estão tão bem estabelecidos para estes casos. Neste trabalho, avaliamos os impactos de diferentes níveis de incerteza associados às observações, realizando assimilação de dados em um modelo de crescimento de tomateiros, com observações artificiais de biomassa de frutos e frutos maduros.
- Open Access
- 9 September 2022
- Published by PAGEPress Publications in Journal of Agricultural Engineering
- Vol. 53 (3)
Monitoring mini-tomatoes growth: A non-destructive machine vision-based alternative
Yield is the most often used metric of crop performance, and it can be defined as the ratio between production, expressed as a function of mass or volume, and the cultivated area. Estimating fruit’s volume often relies on manual measurements, and the procedure precision can change from one person to another. Measuring fruits’ mass will also destroy the samples; consequently, the variation will be measured with different samples. Monitoring fruit’s growth is either based on destructive tests, limited by human labour, or too expensive to be scaled. In this work, we showed that the cluster visible area could be used to describe the growth of mini tomatoes in a greenhouse using image processing in a natural environment with a complex background. The proposed method is based on deep learning algorithms and allows continuous monitoring with no contact with the cluster. The images are collected and delivered from the greenhouse using low-cost equipment with minimal parameterisation. Our results demonstrate that the cluster visible area accumulation is highly correlated (R²=0.97) with growth described by a parameterised Gompertz curve, which is a well-known growth function. This work may also be a starting point for alternative growth monitoring methods based on image segmentation. The proposed U-Net architecture, the discussion about its architecture, and the challenges of the natural environment may be used for other tasks in the agricultural context.
- 9 September 2022
- Published by PAGEPress Publications in Journal of Agricultural Engineering
- Vol. 53 (3)
Open AccessMonitoring mini-tomatoes growth: A non-destructive machine vision-based alternative
Yield is the most often used metric of crop performance, and it can be defined as the ratio between production, expressed as a function of mass or volume, and the cultivated area. Estimating fruit’s volume often relies on manual measurements, and the procedure precision can change from one person to another. Measuring fruits’ mass will also destroy the samples; consequently, the variation will be measured with different samples. Monitoring fruit’s growth is either based on destructive tests, limited by human labour, or too expensive to be scaled. In this work, we showed that the cluster visible area could be used to describe the growth of mini tomatoes in a greenhouse using image processing in a natural environment with a complex background. The proposed method is based on deep learning algorithms and allows continuous monitoring with no contact with the cluster. The images are collected and delivered from the greenhouse using low-cost equipment with minimal parameterisation. Our results demonstrate that the cluster visible area accumulation is highly correlated (R²=0.97) with growth described by a parameterised Gompertz curve, which is a well-known growth function. This work may also be a starting point for alternative growth monitoring methods based on image segmentation. The proposed U-Net architecture, the discussion about its architecture, and the challenges of the natural environment may be used for other tasks in the agricultural context.
- 10 November 2021
- Published by Sociedade Brasileira de Computação
- p. 215-224
Monitoramento de plantas em casas de vegetação para assimilação de dados
Mais dados têm sido gerados em aplicações agrícolas por novas fontes e com grande potencial de uso. Obtidos no campo ou em fazendas verticais, eles podem ser usados, por exemplo, em gêmeos digitais, que visam conectar observações a um modelo do sistema. Essa conexão pode ocorrer por assimilação de dados e em ambientes protegidos, em que as plantas podem ser monitoradas mais intensamente, mais dados estariam disponíveis. Neste trabalho, realizamos assimilação em um modelo de tomateiro usando dados coletados por câmeras e por células de carga, observando que essas fontes fornecem boas estimativas de biomassa da parte aérea e que a técnica melhora as estimativas obtidas pelo modelo Tomgro Reduzido sem calibração.
- 10 November 2021
- Published by Sociedade Brasileira de Computação
- p. 215-224
Monitoramento de plantas em casas de vegetação para assimilação de dados
Mais dados têm sido gerados em aplicações agrícolas por novas fontes e com grande potencial de uso. Obtidos no campo ou em fazendas verticais, eles podem ser usados, por exemplo, em gêmeos digitais, que visam conectar observações a um modelo do sistema. Essa conexão pode ocorrer por assimilação de dados e em ambientes protegidos, em que as plantas podem ser monitoradas mais intensamente, mais dados estariam disponíveis. Neste trabalho, realizamos assimilação em um modelo de tomateiro usando dados coletados por câmeras e por células de carga, observando que essas fontes fornecem boas estimativas de biomassa da parte aérea e que a técnica melhora as estimativas obtidas pelo modelo Tomgro Reduzido sem calibração.
- 1 February 2020
- Published by Elsevier in European Journal of Agronomy
- Vol. 113
How good are the models available for estimating sugar content in sugarcane?
- 1 February 2020
- Published by Elsevier in European Journal of Agronomy
- Vol. 113
How good are the models available for estimating sugar content in sugarcane?
- Open Access
- 1 July 2019
- Published by FapUNIFESP (SciELO) in Scientia Agricola
- Vol. 76 (4) , 281-289
Identification of patterns for increasing production with decision trees in sugarcane mill data
Sugarcane mills in Brazil collect a vast amount of data relating to production on an annual basis. The analysis of this type of database is complex, especially when factors relating to varieties, climate, detailed management techniques, and edaphic conditions are taken into account. The aim of this paper was to perform a decision tree analysis of a detailed database from a production unit and to evaluate the actionable patterns found in terms of their usefulness for increasing production. The decision tree revealed interpretable patterns relating to sugarcane yield (R2 = 0.617), certain of which were actionable and had been previously studied and reported in the literature. Based on two actionable patterns relating to soil chemistry, intervention which will increase production by almost 2 % were suitable for recommendation. The method was successful in reproducing the knowledge of experts of the factors which influence sugarcane yield, and the decision trees can support the decision-making process in the context of production and the formulation of hypotheses for specific experiments.
- 1 July 2019
- Published by FapUNIFESP (SciELO) in Scientia Agricola
- Vol. 76 (4) , 281-289
Open AccessIdentification of patterns for increasing production with decision trees in sugarcane mill data
Sugarcane mills in Brazil collect a vast amount of data relating to production on an annual basis. The analysis of this type of database is complex, especially when factors relating to varieties, climate, detailed management techniques, and edaphic conditions are taken into account. The aim of this paper was to perform a decision tree analysis of a detailed database from a production unit and to evaluate the actionable patterns found in terms of their usefulness for increasing production. The decision tree revealed interpretable patterns relating to sugarcane yield (R2 = 0.617), certain of which were actionable and had been previously studied and reported in the literature. Based on two actionable patterns relating to soil chemistry, intervention which will increase production by almost 2 % were suitable for recommendation. The method was successful in reproducing the knowledge of experts of the factors which influence sugarcane yield, and the decision trees can support the decision-making process in the context of production and the formulation of hypotheses for specific experiments.
- Open Access
- 19 February 2019
- Published by Instituto de Filosofia e Ciências Humanas - UNICAMP in Revista dos Trabalhos de Iniciação Científica da UNICAMP
- No. 26
Learning curves for the modeling of sugar cane productivity
Predicting the final yield of a crop is one of the most important aspects of a mill's agricultural planning. However, numerous factors must be considered to ensure a realistic forecast. Data mining techniques are capable of generating models that predict these values by relating a large amount of data. In this project, we studied learning curves, a tool used in the analysis of a model's performance according to the amount of data available. In an analysis of a database for a sugarcane production, we compared three different modeling techniques, suitable for regression models in the prediction of the final productivity.
- 19 February 2019
- Published by Instituto de Filosofia e Ciências Humanas - UNICAMP in Revista dos Trabalhos de Iniciação Científica da UNICAMP
- No. 26
Open AccessLearning curves for the modeling of sugar cane productivity
Predicting the final yield of a crop is one of the most important aspects of a mill's agricultural planning. However, numerous factors must be considered to ensure a realistic forecast. Data mining techniques are capable of generating models that predict these values by relating a large amount of data. In this project, we studied learning curves, a tool used in the analysis of a model's performance according to the amount of data available. In an analysis of a database for a sugarcane production, we compared three different modeling techniques, suitable for regression models in the prediction of the final productivity.
- Open Access
- 18 February 2019
- Published by Instituto de Filosofia e Ciências Humanas - UNICAMP in Revista dos Trabalhos de Iniciação Científica da UNICAMP
- No. 26
Automatic system for follow-up of leaf area growth individualized by plants
With the advancement of technology and the low cost of equipment, the possibility to analyze and accompany vegetative vigor in real time is the reality. The vigor is related with the leaf area index, which is a metric obtained by a relation between the leaf area and the soil area occupied by the plant. This research had as objective create an automated system of low cost for acquisition and analysis of images, building an accompaniment of the leaf area index of individualized plants.
- 18 February 2019
- Published by Instituto de Filosofia e Ciências Humanas - UNICAMP in Revista dos Trabalhos de Iniciação Científica da UNICAMP
- No. 26
Open AccessAutomatic system for follow-up of leaf area growth individualized by plants
With the advancement of technology and the low cost of equipment, the possibility to analyze and accompany vegetative vigor in real time is the reality. The vigor is related with the leaf area index, which is a metric obtained by a relation between the leaf area and the soil area occupied by the plant. This research had as objective create an automated system of low cost for acquisition and analysis of images, building an accompaniment of the leaf area index of individualized plants.
- Open Access
- 15 February 2019
- Published by Instituto de Filosofia e Ciências Humanas - UNICAMP in Revista dos Trabalhos de Iniciação Científica da UNICAMP
- No. 26
Construction and assessment of a low cost NDVI sensor
Given the potential of low cost sensors for agriculture, a monitoring system with low cost components was constructed to evaluate its capacity to detect variations in vegetative vigor in smooth lettuce seedlings under different growing conditions. The results showed temporal inconsistency and low variability in NDVI values. The inconsistency can be attributed mainly to factors such as luminosity and the high capacity of retention of water and nutrients of the substrate. Days with milder light intensity produced potentially better NDVI values. The low variability of NDVI eventually contributed to its low correlation with mass.
- 15 February 2019
- Published by Instituto de Filosofia e Ciências Humanas - UNICAMP in Revista dos Trabalhos de Iniciação Científica da UNICAMP
- No. 26
Open AccessConstruction and assessment of a low cost NDVI sensor
Given the potential of low cost sensors for agriculture, a monitoring system with low cost components was constructed to evaluate its capacity to detect variations in vegetative vigor in smooth lettuce seedlings under different growing conditions. The results showed temporal inconsistency and low variability in NDVI values. The inconsistency can be attributed mainly to factors such as luminosity and the high capacity of retention of water and nutrients of the substrate. Days with milder light intensity produced potentially better NDVI values. The low variability of NDVI eventually contributed to its low correlation with mass.