MAMarcin Abramski

Marcin Abramski

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Marcin Abramski has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Use of GFRP Tubes as Load-Bearing Jackets in Concrete-Composite Columns

    by Marcin Abramski, Błażej Chmielnicki

    The paper presents the fields of applications of polymer composites in building structures. The use of composite glass fibre tubes is discussed in more detail. The laboratory methods used to test the mechanical properties of these pipes are presented. An original research program is presented, including six concrete-filled glass fibre tubes. The cylinders and columns made in this way were tested for their axial load capacity. Conclusions were formulated regarding the relationship between the load-bearing capacity of the test elements and their length, as well as the angle of glass fibres arrangement in the tube composite.

  • Open Access

    Experimental Studies of Concrete-Filled Composite Tubes under Axial Short- and Long-Term Loads

    by Marcin Abramski, Piotr Korzeniowski, Krzysztof Klempka

    The paper presents experimental studies on axially compressed columns made of concrete-filled glass fiber reinforced polymer (GFRP) tubes. The infill concrete was C30/37 according to Eurocode 2. The investigated composite pipes were characterized by different angles of fiber winding in relation to the longitudinal axis of the element: 20, 55 and 85 degrees. Columns of two lengths, 0.4 m and 2.0 m, were studied. The internal diameter and wall thickness of all the pipes were identical and amounted to 200 mm and 6 mm, respectively. The mean values of two mechanical properties, elasticity modulus and compression strength, were determined. These properties were determined for longitudinal compression and for circumferential tension. The graphs of longitudinal and peripheral deformations of polymer shells as a function of load level are presented both for empty tubes and for concrete-filled ones. The results of long-term investigations of three identically made 0.4 m high concrete-filled GFRP tubes are also presented.


  • Open Access

    Improving Thermal Insulation Properties for Prefabricated Wall Components Made Of Lightweight Aggregate Concrete with Open Structure

    by Marcin Abramski

    Porous concrete is commonly used in civil engineering due to its good thermal insulation properties in comparison with normal concrete and high compression strength in comparison with other building materials. Reducing of the concrete density can be obviously obtained by using lightweight aggregate (e.g. pumice). The concrete density can be further minimized by using specially graded coarse aggregate and little-to-no fine aggregates. In this way a large number of air voids arise. The aggregate particles are coated by a cement paste and bonded together with it just in contact points. Such an extremely porous concrete, called 'lightweight aggregate concrete with open structure' (LAC), is used in some German plants to produce prefabricated wall components. They are used mainly in hall buildings, e.g. supermarkets. The need of improving thermal insulation properties was an inspiration for the prefabrication plant managers, engineers and a scientific staff of the Technical University of Kaiserslautern / Germany to realise an interesting project. Its aim was to reduce the heat transfer coefficient for the wall components. Three different wall structure types were designed and compared in full-scale laboratory tests with originally produced wall components in terms of load-carrying capacity and stiffness. The load was applied perpendicularly to the wall plane. As the components are not originally used for load-bearing walls, but for curtain walls only, the wind load is the main load for them. The wall components were tested in horizontal position and the load was applied vertically. Totally twelve wall components 8.00 × 2.00 × 0.25m (three for every series) were produced in the prefabrication plant and tested in the University of Kaiserslautern laboratory. The designed and tested components differed from each other in the amount of expanded polystyrene (EPS), which was placed in the plant inside the wall structure. The minimal amount of it was designed in the original wall component type. Besides, two improved types of prefabricated wall had built-in steel lattice girders. The failure mode was the same for all the tested components: diagonal cracks occurred on the sides of each component due to their insufficient shear-force-capacity. The span deflection was measured during all the tests by means of LVDTs. Load-carrying capacities obtained in the tests were for all wall structure types similar and much higher (many times) than internal forces (i.e. bending moments and shear forces) calculated for a wind load acting on a typical hall building according to the German codes. An increased amount of EPS (up to 30 per cent in volume) did not influence significantly the wall structural strength. The use of the steel lattice girders caused some technological problems and led to a quality loss of the produced components. The future use of the lattice girders would require a change in the production process: it would have to be more labour consuming.


  • Innovative Shear Connectors for a New Prestressed Composite Slab System for Buildings with Multiple HVACR Installations

    by Marcin Abramski, Thomas Friedrich, Wolfgang Kurz, Juergen Schnell

    In modern buildings various installation systems for HVACR, electricity and communication have to be installed. An innovative approach to this requirement is to include the necessary space in the slab construction. Using this approach a new composite slab system has been developed. It consists of two concrete slab layers on top and bottom side of the construction that are connected with vertical steel webs. Precast slab elements with pre-assembled HVACR equipment are installed at site. For improvement of performance in SLS and ULS the system is prestressed without bonding. To optimize the economics the shear connection between concrete and steel shall be realized with concrete dowels. Due to the installation of pipes and ducts various web openings have to be incorporated in the design of the slab system. Secondary bending moments cause considerable additional loads to the steel web and especially to the concrete dowels connecting steel and concrete. Therefore new types of dowels shall be developed to improve load capacity and ductility both for vertical and horizontal shear forces. Results of the new development on concrete dowel's geometry will be presented. Also a short overview of the first application of this slab system in a multi-story building will be given.

  • Experimentelle und numerische Untersuchungen zum Tragverhalten von Stahlbetondecken mit kugelförmigen Hohlkörpern

    by Marcin Abramski, Andrej Albert, Karsten Pfeffer, Jürgen Schnell

    Massive Flachdecken erweisen sich in Hoch‐ und Industriebau häufig als insgesamt überlegenes Deckensystem. Die hohe Eigenlast dieser Decken kann ihren Anwendungsbereich jedoch einschränken. Eine sinnvolle Abhilfe schafft dann die Integration von Hohlkörpern in der neutralen Zone, weil hierdurch eine spürbare Gewichtsreduktion eintritt. Neben der Eigenlast wird auch der Verbrauch der unter ökologischen Gesichtspunkten wesentlichen Ressourcen Betonstahl und Zement deutlich verringert. Die Hohlräume beeinflussen vor allem die Querkrafttragfähigkeit solcher Decken. Vier Versuchsserien, die mit kugelförmigen Hohlkörperdecken des Systems “cobiax” durchgeführt wurden, werden in diesem Beitrag beschrieben. Aus den Versuchen wird ein Abminderungsfaktor zur Beschreibung des Querkrafttragverhaltens abgeleitet, der auch in die kürzlich erteilte allgemeine bauaufsichtliche Zulassung des Deckensystems eingegangen ist. Die Nachrechnung der Versuche mit der Finite‐Elemente‐Methode zeigt eine gute Übereinstimmung von Numerik und Experiment, so dass in der Weiterentwicklung Parameterstudien auf dieser Grundlage zur Ergänzung von Versuchen hilfreich sein werden.Experimental and Numerical Investigation of the Bearing Behaviour of Hollow Core SlabsMassive flat slabs have proven to be the most appropriate ceiling system for structural and industrial engineering. However the high dead load of these slabs might reduce their field of application. This problem can be solved by void formers that are placed in the neutral zone. These block‐outs cause a noticeable reduction of weight. Furthermore, the masses of ecologically important resources like reinforcement steel and cement can be reduced as well.The shear bearing capacity is significantly influenced by these block‐outs. This article describes four test series with spherical void former floors of the system “cobiax”. A reduction factor for the shear bearing capacity is derived from these tests. That factor was also introduced in the technical approval for this slab system which has been issued recently. A comparison to a calculation with the finite element method shows that the numerical results and the results of the tests are quite similar. In future research, parameter studies based on the finite element method might be helpful additional to further tests.


  • Tragwirkung von Betondübeln für Sandwich‐Verbunddecken mit großen Stegöffnungen

    by Marcin Abramski, Thomas Friedrich, Wolfgang Kurz, Jürgen Schnell

    Neuartige Konzepte zur ökologisch und ökonomisch sinnvollen Ausrüstung von Büroimmobilien und vergleichbaren Gebäuden verlangen nach schlüssiger Integration gebäudetechnischer Anlagen in die Tragkonstruktion. In diesem Beitrag wird über experimentelle Untersuchungen an verformungsarmen Stahlverbund‐Sandwichelementdecken mit Spannweiten von bis zu 16 m und Breiten bis zu 3 m berichtet, bei denen bereits bei der Herstellung Haustechnikkomponenten (Elektro, Lüftung, Heizung, Klima usw.) integriert werden.Die Deckenelemente bestehen aus zwei Platten von je 10 cm Dicke mit einem dazwischenliegenden Hohlraum von 20 cm Höhe. Die Verbindung von oberer und unterer Platte erfolgt mit Stahlblechen sowie bewehrten Betonstegen. Die Bauelemente weisen einen vorgespannten Verbundquerschnitt auf. Die Vorspannung erfolgt ohne Verbund. An den Stegöffnungen werden lokal große Kräfte zwischen den Stahl‐ und den Betonquerschnitten übertragen. Hier wurde eine alternative Lösung zu der recht aufwendigen Ausführung mit liegenden Kopfbolzendübeln untersucht: puzzleförmige Betondübel an den Rändern des Stahlstegs mit und ohne wendelförmiger Umschnürung. Ein besonderes Augenmerk lag dabei auf der Tragfähigkeit der Bauelemente in der Nähe von Stegöffnungen. In diesem Beitrag werden die Systementwicklung dargestellt und experimentelle Untersuchungen der Beton‐Sandwich‐Elementdecke beschrieben.Transferring of loads by concrete dowels in sandwich composite floors with large web openings. Modern conceptions of economically and ecologically sensible HVACR installations in residential and public buildings require their integration in the structure. The paper presents experimental investigation on precast sandwich composite steelconcrete floor with spans of up to 16 m and width up to 3 m, in which the HVACR installations (heating, ventilation, air conditioning, electricity etc.) are integrated already at a concrete plant.The floor consists of two 10 cm thick concrete slabs on both top and bottom sides with 20 cm high blank space between them. Both slabs are connected with vertical steel plates as well as reinforced concrete webs. The floors are post‐tensioned prestressed. There are high local forces being transferred between the concrete slabs and the steel web. A standard solution for joining the both structural elements is the application of horizontal headed studs. An alternative solution was investigated: puzzle‐formed concrete dowels at both edges of the steel web. The concrete dowels were optionally confined with spiral reinforcement. A special attention was focused on the load‐carrying capacity of the floors in the area of large web openings. The floor system with its technical aspects is presented in the paper, as well as the experimental investigations carried out on the floor and separately on the puzzle‐formed concrete dowels.


  • Bearing behaviour of biaxial hollow core slabs

    by Marcin Abramski, Andrej Albert, Andreas Nitsch, Jürgen Schnell

    Two way hollow core slabs with void formers between the upper and lower static reinforcement are getting more and more popular in Germany. The reduction of the dead load of the slab resulting from the cavities allows larger spans compared to solid slabs with the same depth. Since the void formers are spherical or ellipsoid shaped the slab maintains its biaxial strength. However some open questions regarding the bearing behaviour of two way hollow core slabs still prevent a wider spread of these innovative structural elements. The goal of this research project was to answer these open questions.While the bending strength of a two way hollow core slab is almost the same like for a solid slab its shear strength is significantly smaller. Therefore in this research project the shear strength of two way hollow core slabs was investigated. 13 large scale tests and corresponding nonlinear finite element calculations were conducted to prove that the shear strength of a two way hollow core slab is at least 50% of the shear strength of an equivalent solid slab.Another open question was the stiffness of the slab in arbitrary directions which leads to the question whether the internal forces of a two way hollow core slab should be determined like they are determined for a solid slab or rather like they are determined for a ribbed slab. The test and the nonlinear finite element calculations of this research project have shown that it is correct to calculate the internal forces of a two way hollow core slab in the same way like they are calculated for a solid slab.