Elisa Lumantarna
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Elisa Lumantarna has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Nelson T. K. Lam
Univ. of Melbourne
16 shared publications - John Leonard Wilson
Swinburne University of Technology
8 shared publications - Massoud Sofi
Department of Infrastructure Engineering , Faculty of Engineering and Information Technology , The University of Melbourne , Victoria , Australia , unimelb.edu.au
7 shared publications - Priyan Mendis
Department of Infrastructure Engineering, The University of Melbourne, Parkville 3010, Australia
5 shared publications - Prashidha Khatiwada
Department of Infrastructure Engineering, The University of Melbourne, Melbourne, VIC 3010, Australia
4 shared publications - Colin Fraser Duffield
Department of Infrastructure Engineering, The University of Melbourne, Parkville, VIC 3010, Australia
3 shared publications
Latest Publications
- Open Access
- 3 October 2024
- Published by Taylor & Francis in Australian Journal of Structural Engineering
- Vol. 26 (1) , 55-64
Realistic modelling of contributions by floor slabs in the earthquake safety assessment of buildings
- 3 October 2024
- Published by Taylor & Francis in Australian Journal of Structural Engineering
- Vol. 26 (1) , 55-64
Open AccessRealistic modelling of contributions by floor slabs in the earthquake safety assessment of buildings
- 3 September 2024
- Published by Springer Nature
- p. 605-615
Comparative Analysis of Random Forest and Support Vector Machine for a Bridge Damage Detection
- 3 September 2024
- Published by Springer Nature
- p. 605-615
Comparative Analysis of Random Forest and Support Vector Machine for a Bridge Damage Detection
- 3 September 2024
- Published by Springer Nature
- p. 593-604
Machine-Learning Based Prediction Model for Identifying Torsion-Induced Seismic Response Amplification in Plan-Asymmetric Buildings
- 3 September 2024
- Published by Springer Nature
- p. 593-604
Machine-Learning Based Prediction Model for Identifying Torsion-Induced Seismic Response Amplification in Plan-Asymmetric Buildings
- 3 September 2024
- Published by Springer Nature
- p. 929-937
Prediction of the Nonlinear Capacities of RC Buildings Including the Effect of Interactions Between Structural Elements
- 3 September 2024
- Published by Springer Nature
- p. 929-937
Prediction of the Nonlinear Capacities of RC Buildings Including the Effect of Interactions Between Structural Elements
- 1 July 2024
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 76 (13) , 683-695
A simplified numerical model for the temperature profile of early-age concrete
The issue of early-age concrete cracking is challenging and relies on the state of concrete soon after it is placed in the formwork. The concrete state is a function of the strains associated with thermal and other dilatations and the level of in situ strength. Both strain and strength primarily require information on the temperature–time history of the concrete element. For larger elements, the thermal history varies significantly across the thickness and the concrete material itself acts as confinement for discrete elements. Due to complexity of this issue, designers currently rely on mock tests and/or finite-element (FE) modelling for structures that are deemed ‘important’. Both approaches are costly and time consuming. It is therefore important to have a robust yet simple model to estimate the temperature variation experienced by concrete elements. The proposed spreadsheet-based model presented in this paper aims to provide a rapid estimate of the temperature profiles within a hydrating concrete element. The model uses the concept of effective thickness and the revised heat compensation technique. It was validated based on the measured temperature development of a concrete block of rectangular section. The proposed model was also successfully compared with output from FE software (TNO Diana).
- 1 July 2024
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 76 (13) , 683-695
A simplified numerical model for the temperature profile of early-age concrete
The issue of early-age concrete cracking is challenging and relies on the state of concrete soon after it is placed in the formwork. The concrete state is a function of the strains associated with thermal and other dilatations and the level of in situ strength. Both strain and strength primarily require information on the temperature–time history of the concrete element. For larger elements, the thermal history varies significantly across the thickness and the concrete material itself acts as confinement for discrete elements. Due to complexity of this issue, designers currently rely on mock tests and/or finite-element (FE) modelling for structures that are deemed ‘important’. Both approaches are costly and time consuming. It is therefore important to have a robust yet simple model to estimate the temperature variation experienced by concrete elements. The proposed spreadsheet-based model presented in this paper aims to provide a rapid estimate of the temperature profiles within a hydrating concrete element. The model uses the concept of effective thickness and the revised heat compensation technique. It was validated based on the measured temperature development of a concrete block of rectangular section. The proposed model was also successfully compared with output from FE software (TNO Diana).
- Open Access
- 6 May 2024
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 28 (13) , 3724-3743
New Behavioural Trends of Plan Asymmetric Limited Ductile Buildings Revealed by Incremental Dynamic Analysis
- 6 May 2024
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 28 (13) , 3724-3743
Open AccessNew Behavioural Trends of Plan Asymmetric Limited Ductile Buildings Revealed by Incremental Dynamic Analysis
- Open Access
Site-Specific Seismic Analysis of Buildings Supported by Lightly Reinforced Precast Concrete Walls
This paper aims to show the application of site-specific response spectra in the analysis of buildings that are supported by lightly reinforced precast concrete walls. Previous surveys on load-bearing precast reinforced concrete walls in multi-storey buildings in low-to-moderate seismic regions have found that many existing precast walls are lightly reinforced with a connection reinforcement ratio less than the wall reinforcement ratio. When these precast walls are subjected to reversed cyclic loads, the lateral response is typically controlled by rocking and the ultimate performance is governed by the ruptures of connection dowels. This paper uses moment–curvature analyses in combination with plastic hinge analyses to evaluate the force–displacement capacity of planar lightly reinforced load-bearing precast walls. The seismic performance of a building supported by these lightly reinforced precast walls can then be assessed by superimposing the capacity curve and the inelastic site-specific response spectra developed for the building site. The proposed analytical approach is illustrated through a case study building. By comparing a lightly reinforced precast wall with a comparable limited ductile reinforced concrete wall, it is also found that, although these two walls exhibit similar force capacities, the ultimate displacement capacity of the lightly reinforced precast wall is significantly lower. This finding highlights the potential seismic vulnerability of lightly reinforced precast walls in some existing buildings.
Open AccessSite-Specific Seismic Analysis of Buildings Supported by Lightly Reinforced Precast Concrete Walls
This paper aims to show the application of site-specific response spectra in the analysis of buildings that are supported by lightly reinforced precast concrete walls. Previous surveys on load-bearing precast reinforced concrete walls in multi-storey buildings in low-to-moderate seismic regions have found that many existing precast walls are lightly reinforced with a connection reinforcement ratio less than the wall reinforcement ratio. When these precast walls are subjected to reversed cyclic loads, the lateral response is typically controlled by rocking and the ultimate performance is governed by the ruptures of connection dowels. This paper uses moment–curvature analyses in combination with plastic hinge analyses to evaluate the force–displacement capacity of planar lightly reinforced load-bearing precast walls. The seismic performance of a building supported by these lightly reinforced precast walls can then be assessed by superimposing the capacity curve and the inelastic site-specific response spectra developed for the building site. The proposed analytical approach is illustrated through a case study building. By comparing a lightly reinforced precast wall with a comparable limited ductile reinforced concrete wall, it is also found that, although these two walls exhibit similar force capacities, the ultimate displacement capacity of the lightly reinforced precast wall is significantly lower. This finding highlights the potential seismic vulnerability of lightly reinforced precast walls in some existing buildings.
- Open Access
Assessment of Torsional Amplification of Drift Demand in a Building Employing Site-Specific Response Spectra and Accelerograms
This paper aims at giving structural designers guidance on how to transform seismic demand on a building structure from two-dimensional (2D) to three-dimensional (3D) in an expedient manner, taking into account amplification of the torsional actions. This paper is to be read in conjunction with either paper #3 or #4. Torsional amplification of the drift demand in a building is of major concern in the structural design for countering seismic actions on the building. Code-based seismic design procedures based on elastic analyses may understate torsional actions in a plan of asymmetric building. This is because the inability of elastic analyses to capture the abrupt increase in the torsional action as the limit of yield of the supporting structural walls is surpassed. Nonlinear dynamic analysis can provide accurate assessment of torsional actions in a building which has been excited to respond in the inelastic range. However, a 3D whole building analysis of a multi-storey building can be costly and challenging, and hence not suited to day-to-day structural design. To simplify the analysis and reduce the scale of the computation, closed-form expressions are introduced in this paper for estimation of the drift demand ratio for elastic conditions when buildings are subjected to moderate-intensity ground shaking. The drift demand of the 3D model can be estimated as a product of the 2D drift demand and the drift demand ratio. In dealing with higher-intensity ground shaking causing yielding to occur, a macroscopic modelling methodology may be employed. The estimated drift demand ratio of an equivalent single-storey building is combined with separate analysis for determination of the 2D drift demand. The deflection profile of the multi-storey prototype taking into account 3D effects, including torsional actions, is hence obtained. The accuracy of the presented methodologies has been verified by case studies in which drift estimates generated by the proposed calculation procedure were compared against results from whole building analyses, employing a well-established computer software.Open AccessAssessment of Torsional Amplification of Drift Demand in a Building Employing Site-Specific Response Spectra and Accelerograms
This paper aims at giving structural designers guidance on how to transform seismic demand on a building structure from two-dimensional (2D) to three-dimensional (3D) in an expedient manner, taking into account amplification of the torsional actions. This paper is to be read in conjunction with either paper #3 or #4. Torsional amplification of the drift demand in a building is of major concern in the structural design for countering seismic actions on the building. Code-based seismic design procedures based on elastic analyses may understate torsional actions in a plan of asymmetric building. This is because the inability of elastic analyses to capture the abrupt increase in the torsional action as the limit of yield of the supporting structural walls is surpassed. Nonlinear dynamic analysis can provide accurate assessment of torsional actions in a building which has been excited to respond in the inelastic range. However, a 3D whole building analysis of a multi-storey building can be costly and challenging, and hence not suited to day-to-day structural design. To simplify the analysis and reduce the scale of the computation, closed-form expressions are introduced in this paper for estimation of the drift demand ratio for elastic conditions when buildings are subjected to moderate-intensity ground shaking. The drift demand of the 3D model can be estimated as a product of the 2D drift demand and the drift demand ratio. In dealing with higher-intensity ground shaking causing yielding to occur, a macroscopic modelling methodology may be employed. The estimated drift demand ratio of an equivalent single-storey building is combined with separate analysis for determination of the 2D drift demand. The deflection profile of the multi-storey prototype taking into account 3D effects, including torsional actions, is hence obtained. The accuracy of the presented methodologies has been verified by case studies in which drift estimates generated by the proposed calculation procedure were compared against results from whole building analyses, employing a well-established computer software. - Open Access
Dynamic Modal Analyses of Building Structures Employing Site-Specific Response Spectra Versus Code Response Spectrum Models
This paper is aimed at giving structural designers guidance on how to make use of elastic site-specific response spectra for the dynamic modal analysis of a structure in support of its structural design. The use of response spectra in support of the pushover analysis of an RC building forming part of the non-linear static analysis procedure (that can be used to predict seismic demand without relying on the code-stipulated default R factor) is also presented. Seismic analysis of structures based on the use of site-specific response spectra can help to achieve a more optimised, and cost-effective, structural design compared to the conventional approach employing a response spectrum model stipulated by the code for different site classes. Currently, the methodology is only adopted in major projects in which enough resources are available to engage experts who are skilled in operating the procedure; thus, the use of site-specific response spectra in structural engineering practice is still limited despite the merits of the procedure. Deriving a site-specific response spectrum requires a database of representative ground motion records to be developed. Extra analytical tasks to be undertaken include the processing of bore log data, site response analyses, and selection/scaling of bedrock accelerograms for input into site response analyses. Guidelines for implementing this design methodology are currently lacking. To promote the wide adoption of site-specific seismic design, this article presents the procedure for developing the required site-specific design spectra, as well as guidelines for applying these spectra for seismic design based on analyses of linear, or nonlinear, models of the building. Non-linear analysis can be accomplished by dealing with macroscopic models as illustrated in a case study.
Open AccessDynamic Modal Analyses of Building Structures Employing Site-Specific Response Spectra Versus Code Response Spectrum Models
This paper is aimed at giving structural designers guidance on how to make use of elastic site-specific response spectra for the dynamic modal analysis of a structure in support of its structural design. The use of response spectra in support of the pushover analysis of an RC building forming part of the non-linear static analysis procedure (that can be used to predict seismic demand without relying on the code-stipulated default R factor) is also presented. Seismic analysis of structures based on the use of site-specific response spectra can help to achieve a more optimised, and cost-effective, structural design compared to the conventional approach employing a response spectrum model stipulated by the code for different site classes. Currently, the methodology is only adopted in major projects in which enough resources are available to engage experts who are skilled in operating the procedure; thus, the use of site-specific response spectra in structural engineering practice is still limited despite the merits of the procedure. Deriving a site-specific response spectrum requires a database of representative ground motion records to be developed. Extra analytical tasks to be undertaken include the processing of bore log data, site response analyses, and selection/scaling of bedrock accelerograms for input into site response analyses. Guidelines for implementing this design methodology are currently lacking. To promote the wide adoption of site-specific seismic design, this article presents the procedure for developing the required site-specific design spectra, as well as guidelines for applying these spectra for seismic design based on analyses of linear, or nonlinear, models of the building. Non-linear analysis can be accomplished by dealing with macroscopic models as illustrated in a case study.
- 1 August 2021
- Published by Springer Nature
- p. 289-299
Finite Element Modelling of Concentrated Anchorage Load in Early Age Concrete
- 1 August 2021
- Published by Springer Nature
- p. 289-299
Finite Element Modelling of Concentrated Anchorage Load in Early Age Concrete