Yichen Jia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yichen Jia has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Charles H. Ahn
Department of Applied Physics, Yale University, New Haven, Connecticut 06520, USA
2 shared publications- Fengnian Xia
Department of Electrical and Computer Engineering, Yale University, New Haven, USA
2 shared publications - Aaron M. Jones
HRL Laboratories, LLC, 3011 Malibu Canyon Road, Malibu, California 90265, USA
1 shared publication Alexie M. Kolpak
Department of Mechanical Engineering, Massachusetts Institute of Technology , Cambridge, Massachusetts 02139, United States
1 shared publicationArvinder Chadha
Nanophotonics Lab, Department of Electrical Engineering, University of Texas at Arlington, Arlington, Texas 76019, USA
1 shared publicationDeyin Zhao
Nanophotonics Lab, Department of Electrical Engineering, University of Texas at Arlington, Arlington, Texas 76019, USA
1 shared publication
Latest Publications
- Open Access
- 1 April 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (4) , 041104
Low temperature growth of epitaxial ferroelectric BaTiO3
BaTiO3 exhibits several functional properties, such as high dielectric constant, large Pockels coefficient, and strong ferroelectricity/piezoelectricity. These properties can be used for a variety of applications, such as ferroelectric tunnel junctions in non-volatile memory devices. To achieve large-scale integration of BaTiO3, however, one requires the synthesis of high-quality BaTiO3 films at low temperatures in order to be compatible with the thermal budget of electronic processes in use today. Here, we describe the synthesis of BaTiO3 thin films by molecular beam epitaxy and find that coherently strained and ferroelectric BaTiO3 can be grown at temperatures as low as 310 °C. Using reflection high energy diffraction, we demonstrate a surface mobility of BaO and TiO2 adatoms that is high enough to promote ferroelectric crystal growth at low temperatures. A clear ferroelectric polarization switching is observed using piezoresponse force microscopy. Our results pave the way toward large-scale integration of ferroelectric BaTiO3 with mainstream electronics platforms.
- 1 April 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (4) , 041104
Open AccessLow temperature growth of epitaxial ferroelectric BaTiO3
BaTiO3 exhibits several functional properties, such as high dielectric constant, large Pockels coefficient, and strong ferroelectricity/piezoelectricity. These properties can be used for a variety of applications, such as ferroelectric tunnel junctions in non-volatile memory devices. To achieve large-scale integration of BaTiO3, however, one requires the synthesis of high-quality BaTiO3 films at low temperatures in order to be compatible with the thermal budget of electronic processes in use today. Here, we describe the synthesis of BaTiO3 thin films by molecular beam epitaxy and find that coherently strained and ferroelectric BaTiO3 can be grown at temperatures as low as 310 °C. Using reflection high energy diffraction, we demonstrate a surface mobility of BaO and TiO2 adatoms that is high enough to promote ferroelectric crystal growth at low temperatures. A clear ferroelectric polarization switching is observed using piezoresponse force microscopy. Our results pave the way toward large-scale integration of ferroelectric BaTiO3 with mainstream electronics platforms.
- 26 December 2017
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (1) , 241-246
Single Atomic Layer Ferroelectric on Silicon
A single atomic layer of ZrO2 exhibits ferroelectric switching behavior when grown with an atomically abrupt interface on silicon. Hysteresis in capacitance-voltage measurements of a ZrO2 gate stack demonstrates that a reversible polarization of the ZrO2 interface structure couples to the carriers in the silicon. First-principles computations confirm the existence of multiple stable polarization states and the energy shift in the semiconductor electron states that result from switching between these states. This monolayer ferroelectric represents a new class of materials for achieving devices that transcend conventional CMOS technology. Significantly, a single atomic layer ferroelectric allows for more aggressively scaled devices than bulk ferroelectrics, which currently need to be thicker than 5-10 nm to exhibit significant hysteretic behavior.
- 26 December 2017
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (1) , 241-246
Single Atomic Layer Ferroelectric on Silicon
A single atomic layer of ZrO2 exhibits ferroelectric switching behavior when grown with an atomically abrupt interface on silicon. Hysteresis in capacitance-voltage measurements of a ZrO2 gate stack demonstrates that a reversible polarization of the ZrO2 interface structure couples to the carriers in the silicon. First-principles computations confirm the existence of multiple stable polarization states and the energy shift in the semiconductor electron states that result from switching between these states. This monolayer ferroelectric represents a new class of materials for achieving devices that transcend conventional CMOS technology. Significantly, a single atomic layer ferroelectric allows for more aggressively scaled devices than bulk ferroelectrics, which currently need to be thicker than 5-10 nm to exhibit significant hysteretic behavior.
- Top Cited Papers
- 27 April 2015
- Published by Springer Nature in Nature Nanotechnology
- Vol. 10 (6) , 517-521
Highly anisotropic and robust excitons in monolayer black phosphorus
Semi-metallic graphene and semiconducting monolayer transition-metal dichalcogenides are the most intensively studied two-dimensional materials of recent years. Lately, black phosphorus has emerged as a promising new two-dimensional material due to its widely tunable and direct bandgap, high carrier mobility and remarkable in-plane anisotropic electrical, optical and phonon properties. However, current progress is primarily limited to its thin-film form. Here, we reveal highly anisotropic and strongly bound excitons in monolayer black phosphorus using polarization-resolved photoluminescence measurements at room temperature. We show that, regardless of the excitation laser polarization, the emitted light from the monolayer is linearly polarized along the light effective mass direction and centres around 1.3 eV, a clear signature of emission from highly anisotropic bright excitons. Moreover, photoluminescence excitation spectroscopy suggests a quasiparticle bandgap of 2.2 eV, from which we estimate an exciton binding energy of ∼0.9 eV, consistent with theoretical results based on first principles. The experimental observation of highly anisotropic, bright excitons with large binding energy not only opens avenues for the future explorations of many-electron physics in this unusual two-dimensional material, but also suggests its promising future in optoelectronic devices.
- 27 April 2015
- Published by Springer Nature in Nature Nanotechnology
- Vol. 10 (6) , 517-521
Top Cited PapersHighly anisotropic and robust excitons in monolayer black phosphorus
Semi-metallic graphene and semiconducting monolayer transition-metal dichalcogenides are the most intensively studied two-dimensional materials of recent years. Lately, black phosphorus has emerged as a promising new two-dimensional material due to its widely tunable and direct bandgap, high carrier mobility and remarkable in-plane anisotropic electrical, optical and phonon properties. However, current progress is primarily limited to its thin-film form. Here, we reveal highly anisotropic and strongly bound excitons in monolayer black phosphorus using polarization-resolved photoluminescence measurements at room temperature. We show that, regardless of the excitation laser polarization, the emitted light from the monolayer is linearly polarized along the light effective mass direction and centres around 1.3 eV, a clear signature of emission from highly anisotropic bright excitons. Moreover, photoluminescence excitation spectroscopy suggests a quasiparticle bandgap of 2.2 eV, from which we estimate an exciton binding energy of ∼0.9 eV, consistent with theoretical results based on first principles. The experimental observation of highly anisotropic, bright excitons with large binding energy not only opens avenues for the future explorations of many-electron physics in this unusual two-dimensional material, but also suggests its promising future in optoelectronic devices.
- 3 November 2014
- Published by AIP Publishing in Applied Physics Letters
- Vol. 105 (18) , 181105
Approaching total absorption at near infrared in a large area monolayer graphene by critical coupling
We demonstrate experimentally close to total absorption in monolayer graphene based on critical coupling with guided resonances in transfer printed photonic crystal Fano resonance filters at near infrared. Measured peak absorptions of 35% and 85% were obtained from cavity coupled monolayer graphene for the structures without and with back reflectors, respectively. These measured values agree very well with the theoretical values predicted with the coupled mode theory based critical coupling design. Such strong light-matter interactions can lead to extremely compact and high performance photonic devices based on large area monolayer graphene and other two–dimensional materials.
- 3 November 2014
- Published by AIP Publishing in Applied Physics Letters
- Vol. 105 (18) , 181105
Approaching total absorption at near infrared in a large area monolayer graphene by critical coupling
We demonstrate experimentally close to total absorption in monolayer graphene based on critical coupling with guided resonances in transfer printed photonic crystal Fano resonance filters at near infrared. Measured peak absorptions of 35% and 85% were obtained from cavity coupled monolayer graphene for the structures without and with back reflectors, respectively. These measured values agree very well with the theoretical values predicted with the coupled mode theory based critical coupling design. Such strong light-matter interactions can lead to extremely compact and high performance photonic devices based on large area monolayer graphene and other two–dimensional materials.