Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Michele Godio has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Modelling of masonry walls under seismic loadings

    by Michele Godio

    Modélisation des murs en maçonnerie sous sollicitations sismiques: Dans un premier temps, la méthode est présentée pour le cas bidimensionnel. La méthode est introduite de manière générale, en ce qui concerne les milieux discrets périodiques. L’application à la maçonnerie est ensuite abordée. La résistance homogénéisée de colonnes et murs de maçonnerie est calculée en termes de contraintes et couples-contraintes généralisées du milieu continu de Cosserat. La formulation d’une méthode basée sur le milieu de Cosserat permet la prise en compte de l’influence de la rotation relative des particules du milieu discret. Cette influence est mise en évidence à travers l’application à la maçonnerie, en comparaison avec les autres méthodes présentes dans la littérature. Dans un deuxième temps, la méthode est étendue au cas tridimensionnel. Des milieux discrets périodiques ayant leurs particules disposées le long de trois directions spatiales et montrant trois vecteurs de périodicité sont alors considérés. L’extension de la méthode s’inscrit dans le cadre de la théorie micropolaire tridimensionnelle. Cela permet la prise en compte des effets 3Dde la translation et la rotation relative des particules. L’application aux colonnes et aux murs de maçonnerie montre comment la résistance dans le plan et hors-plan de la maçonnerie sont, par ces effets, couplées. La rotation relative des blocs accentue cette interaction, qui comporte une diminution de la résistance dans-le-plan précédemment calculée. Les murs de maçonnerie sont ici décrits par des modèles de plaque micropolaire. Une formulation aux éléments finis pour des modèles de plaque micropolaire est ensuite développée. Dans un premier temps, la formulation est présentée pour l’élasticité et la dynamique. La validation d’un élément fini spécifique pour le calcul des structures est faite à l’aide d’exemples numériques. L’utilisation de cet élément sur des structures de maçonnerie est ensuite abordée, par l’implémentation d’un modèle d’homogénéisation déjà existant. Les fréquences fondamentales d’un mur maçonné sont ainsi calculées et comparées avec celle obtenues par un modèles aux éléments discrets. L’importance des rotations des blocs dans le plan du mur ainsi que leur participation dans la réponse inertielle du mur vis-à-vis des actions sismiques sont enfin investiguées. Dans un deuxième temps, la formulation aux élements finis est étendue à la plasticité, à travers l’implémentation de la théorie multi-critère pour les milieux de Cosserat. L’implémentation de cette théorie est basée sur un algorithme de projection, dont le schéma itératif de résolution est reporté. Les aspects numériques reliés à l’implémentation de l’algorithme sont examinés. Une importante limitation de l’implémentation classique de l’algoritme est montrée et une nouvelle stratégie de solution est proposée. L’élément fini de Cosserat est donc validé pour la plasticite à l’aide de nombreux exemples numériques. En conclusion, trois approches de modélisation pour les structures de maçonnerie sont proposéeset comparées. Un model continu d’homogénéisation basée sur le milieu de Cosserat est d’abord présenté. Le modèle est construit en introduisant les critères de ruptures homogénéisés calculés dans la première partie du travail dans l’élément fini développé dans la deuxième partie du travail. Un modèle continu basée sur le milieu de Cauchy est ensuite considéré. Ce denier est construit à partir de modèles déjà présents dans la littérature. L’efficacité de ces deux modèles est examinée dans la représentation du comportement élastoplastique d’un mur de maçonnerie. Leur comparaison se base sur un troisième modèle, crée à l’aide des éléments discrets. La capacité des trois modèles de modéliser l’effet d’échelle dans la formation des mécanismes de ruine est enfin investiguée sur une application pratique aux structures de maçonnerie

  • Open Access

    Nonlinear Response‐History Analyses of Masonry and Mixed Structures With HybriDFEM

    by Igor Bouckaert, Michele Godio, João Pacheco de Almeida

    The hybrid discrete‐finite element (HybriDFEM) method, previously developed to perform static and modal analysis in discrete and coupled discrete‐finite element models, is extended to nonlinear response‐history analyses. The equations of motion for the HybriDFEM model are solved through various numerical time‐integration schemes, both explicit and implicit, and considering different damping models. Specific examples are presented to assess the effectiveness of the implementation. First, a stability and accuracy analysis is performed on an undamped elastic beam undergoing free vibrations to investigate period elongation with respect to the time step. Next, the dynamic response of a masonry column and masonry arch subjected to impulse loads is evaluated, exploring the performance of HybriDFEM in problems involving rocking, curved geometries, large deformations, and damping. It is shown, by comparison with other discrete element models, that both rocking and full collapse can be captured with fidelity by HybriDFEM, and that implicit schemes can reduce the computational demand with respect to explicit ones without affecting solution accuracy. Although the use of viscous Rayleigh damping defined at the global level is commonly implemented in FEM, key issues related to its use in DEM are raised and explained in this paper, namely the occurrence of mechanisms during the analysis, which can nullify damping forces when tangent stiffness‐proportional damping is employed. In the final example, a response analysis is conducted on a numerical mock‐up representative of a mixed reinforced concrete‐masonry building subjected to ground motion. It demonstrates how complex interactions between structural elements can be captured with realistic simulation timeframes by coupling rigid‐block HybriDFEM representations, for the masonry walls, with standard beam elements, for the reinforced concrete beams and columns.

  • Hybrid Discrete-Finite Element method for biaxially-discretized structures

    by Igor Bouckaert, Michele Godio, João Pacheco de Almeida


  • Open Access

    Development of the Västra Götaland Operating Cycle for Long-Haul Heavy-Duty Vehicles

    by Luigi Romano, Michele Godio, Pär Johannesson, Fredrik Bruzelius, Toheed Ghandriz, Bengt Jacobson

    In this paper, a complete operating cycle (OC) description is developed for heavy-duty vehicles traveling long distances in the region of Västra Götaland, Sweden. Variation amongst road transport missions is accounted for using a collection of stochastic models. These are parametrized from log data for all the influential road parameters that may affect the energy performance of heavy trucks, including topography, curvature, speed limits, and stop signs. The statistical properties of the developed OC description are investigated numerically by considering some composite variables, condensing the salient information about the road characteristics, and inspired by two existing classification systems. Two examples are adduced to illustrate the potential of the OC format, which enables ease of classification and detailed simulation of energy efficiency for individual vehicles, with application in vehicle design optimization and selection, production planning, and predictive maintenance. In particular, for the track used in the first example, a Volvo FH13 equipped with a diesel engine, simulation results indicate mean CO 2 emissions of around 1700 g km -1 , with a standard deviation of 360 g km -1 ; in the second example, dealing with electrical fleet sizing, the optimal proportion shows a predominance of tractor-semitrailer vehicles (70%) equipping 4 motors and 11 battery packs.


  • Open Access

    Seismic analysis of failure mechanisms in adjacent interacting stone masonry buildings via rigid block modeling

    by Raffaele Gagliardo, Michele Godio, Francesco P. A. Portioli, Raffaele Landolfo

    Groups of contiguous unreinforced stone masonry buildings are a common type of housing seen in old European downtowns. However, assessing their response to earthquakes poses several challenges to the analysts, especially when the housing units are laid out in compact configurations. In fact, in those circumstances a modeling technique that allows for the dynamic interaction of the units is required. The numerical study carried out in this paper makes use of a rigid block modeling approach implemented into in-house software tools to simulate the static behavior and dynamic response of an aggregate stone masonry building. Said approach is used to reproduce the results of bi-axial shake-table tests that were performed on a building prototype as part of the activities organized within the Adjacent Interacting Masonry Structures project, sponsored by the Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe. The experimental mock-up consisted of two adjacent interacting units with matching layout but different height. Two rigid block models are used to investigate the seismic response of the mock-up: a 3D model allowing for the limit analysis of the building on one hand, and a 2D model allowing for the non-linear static pushover and time-history analysis on the other. The 3D model was built for the blind prediction of the test results, as part of a competition organized to test different modeling approaches that are nowadays available to the analysts. The 2D model was implemented once the experimental data were made available, to deepen the investigation by non-linear static pushover and time-history analysis. In both models, the stonework is idealized into an assemblage of rigid blocks interacting via no-tension frictional interfaces, and mathematical programming is utilized to solve the optimization problems associated to the different types of analysis. Differences between numerical and experimental failure mechanisms, base shears, peak ground accelerations, and displacement histories are discussed. Potentialities and limitations of the adopted rigid block models for limit, pushover and time-history analyses are pointed out on the basis of their comparisons with the experimental results.