SSSiwei Sun

Siwei Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Siwei Sun has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • High-Linearity Back-Illuminated Position-Sensitive Detector Enabled by Nonlinearity Analysis Methodology for 3-D Wavefront Sensor Integration

    by Xuetao Yan, Yetong Zhang, Siwei Sun, Xiangxu Meng, Qidong Wang, Liqiang Cao

    Adaptive optics (AO) is essential for correcting wavefront aberrations caused by atmospheric turbulence in ground-based astronomical observations. The increasing aperture size of modern telescopes drives the need for AO systems capable of high-speed, large-field wavefront correction. However, conventional Shack–Hartmann wavefront sensors (SHWFSs) based on charge-coupled device (CCD) or complementary metal–oxide semiconductor (CMOS) detectors face challenges in kilohertz-level operation over wide fields of view. This is primarily due to the limited frame rate and dynamic range. To address these challenges, this study introduces a back-illuminated position-sensitive detector (PSD) array, using a physics-based nonlinearity analysis methodology and 3-D interconnect packaging technology. First, a systematic nonlinearity analysis is conducted to reveal the impact of device structure (P+–P–N ${}^{-}$ versus P+–N–N ${}^{-}\text {)}$ on positional accuracy, demonstrating that the P+–P–N ${}^{-}$ structure significantly suppresses nonlinearity through optimized carrier transport. Second, a TCAD simulation model is established to analyze the formation and suppression strategies of electrical crosstalk in the array, revealing that the P+–P–N ${}^{-}$ structure also achieves significant crosstalk suppression. The fabricated PSD array achieves a fill factor of 79.6%, 3.6 times higher than conventional surface-illuminated counterparts, enabled by redistribution layer (RDL) and flip-chip packaging. The measured results show that PSD array has a position resolution of $0.5~\mu $ m, nonlinearity of 0.75%, response time of $2.39~\mu $ s, and interpixel crosstalk below 0.6%. Numerical simulations further validate that the array supports a capture rate of 95.9 kHz and an angular dynamic range of 9.9°, exceeding traditional SHWFS by over an order of magnitude.


  • A new dual-zone position sensitive detector for roll angle Measurement: Design and validation

    by Xiangxu Meng, Xuetao Yan, Siwei Sun, Fengman Liu, Qidong Wang, Liqiang Cao


  • Open Access

    High-Bandwidth Lumped Mach-Zehnder Modulators Based on Thin-Film Lithium Niobate

    by Peng Yang, Siwei Sun, Yuqiang Zhang, Rui Cao, Huimin He, Haiyun Xue, Fengman Liu

    Recently, lumped Mach-Zehnder Modulators (MZMs) have received renewed attention due to their potential for low power consumption and compact size. However, the practicality of lumped MZMs with conventional lumped electrodes (C−LEs) is limited by their lower electro−optical (EO) bandwidth. The reduction in EO bandwidth results from the inherent trade−off between EO bandwidth and half−wave voltage length product (VπL) within the C−LE architecture. This paper proposes a thin−film lithium niobate (TFLN)−based lumped MZM with capacitively−loaded lumped electrodes (CL−LEs). The purely linear EO effect of the LN eliminates the parasitic capacitance in the doped PN junction and enhances the EO bandwidth. Furthermore, the CL−LE structure can break the limitation between EO bandwidth and VπL inherent in the C−LE design. Simulations show the proposed device achieves a high EO bandwidth of 32.4 GHz and a low VπL of 1.15 V·cm. Due to the reduced capacitance and lower VπL, the power consumption of the device is as low as 0.1 pJ/bit. Simulation results indicate that the open−eye diagrams are achieved at 64 Gb/s for 1.5 mm TFLN lumped MZM, with an ER of 2.97 dB. Consequently, the proposed device architecture substantially enhances the performance of lumped MZMs, showing promise for application in short−reach optical interconnects within data centers.


  • Open Access

    Six-Degree-of-Freedom Posture Measurement Technologies Using Position Sensitive Detectors (PSDs): State of the Art

    by Xiangxu Meng, Siwei Sun, Xuetao Yan, Fengman Liu, Liqiang Cao, Qidong Wang, Yu Sun

    Six degree-of-freedom (6-DOF) posture measurement is an important academic research topic which has been broadly applied in many fields. As a high-speed photoelectronic sensor with ultra-high resolution and precision, position sensitive detector (PSD) has shown to be one of the most competitive candidates in 6-DOF measurement. This review presents the research progress of PSD-based 6-DOF posture measurement systems in the field of large-scale equipment assembly, ultra-precision manufacturing and other emerging areas. A total of six methods for implementing 6-DOF measurement are summarized and their advantages and limitations are discussed. Meanwhile, the paper illustrates challenges, potential solutions and future development trends.


  • Research on 3D Optical Module Integrating Edge Coupler and TSV

    by Qi Zheng, Peng Yang, Haiyun Xue, Huimin He, Rui Cao, Fengwei Dai, Siwei Sun, Fengman Liu, Qidong Wang, Liqiang Cao, et al.

    3D integration photonic interposer is becoming popular in the field of co-packaging optics (CPO). In this paper, we integrate the edge coupler and through silicon via (TSV) into the silicon interposer. Different high-frequency transmission lines are designed, analyzed and simulated. The measured results and the simulation have a good correspondence. The high frequency transmission lines, which consist of 10 μm × 100 μm TSVs and two redistribution layer (RDL) lines of 100 μm on the top layer and one 100 μm RDL line on the bottom layer, shows perfect insertion loss less than 0.35 dB @67 GHz. In addition, the 56GBaud (112Gbps) eye diagram is tested and shows excellent transmission quality. Edge couplers are designed and fabricated by packaging process. The coupling loss of coupler is less than 1.7 dB/facet. The 3D optical package module based on the active optical interposer has also been realized and verified.


  • High Positional Resolution Pin-Cushion Position Sensitive Detector by Deliberately Introducing Barrel Distortion

    by Siwei Sun, Qi Zheng, Xiangxu Meng, Peng Sun, Fengman Liu, Liqiang Cao

    High positional resolution position sensitive detector (PSD) is strongly desired in high-precision position and angle measurement systems. However, a method that can enhance the positional resolution of most types of PSDs is promising but not reported. In this work, the barrel distortion is introduced deliberately in a two dimensional (2-D) pin-cushion PSD to enhance its positional resolution, through changing the sheet resistance ratio of photosensitive area and border resistor. This method has the effect of improving the positional resolution of PSD in the entire photosensitive area. PSDs with free of distortion and barrel distortion are fabricated and tested to verify that the resolution of PSD with barrel distortion is higher than PSD with free of distortion. Multi-layer feed-forward (MLF) neural network is used to correct position errors and improve the linearity of PSD with barrel distortion to about 0.02% of nonlinearity. Consequently, a high resolution and high linearity PSD is proposed and demonstrated using the method of barrel distortion, and corrected by MLF neural work. It’s worth noting that this method can be used to improve the positional resolution of most types of PSDs, without increasing the structure complexity, manufacturing cost and pressure on the back-end signal processing circuit.


  • Fabrication and modeling of antenna integrated uni-traveling-carrier photodiodes

    by Siwei Sun, Lichen Zhang, Liqiang Cao, Song Liang

    The fabrication and modeling of bow-tie antenna integrated uni-traveling carrier photodiodes (UTC-PD) are presented. The experimental results show that a −10.68 dBm RF power can be obtained from the 4 × 50 μm2 area UTC-PD at 100 GHz. The device is modeled by high frequency simulation software. The trend of variation of the measured terahertz (THz) power with frequency matches well with the simulation results. Based on the model, the effects of the shape and the contact pads of the antenna on the THz power emission properties of the device are studied numerically, which helps to further optimize the device design.

  • Open Access

    Novel Low-Loss Fiber-Chip Edge Coupler for Coupling Standard Single Mode Fibers to Silicon Photonic Wire Waveguides

    by Siwei Sun, Ying Chen, Yu Sun, Fengman Liu, Liqiang Cao

    Fiber-to-chip optical interconnects is a big challenge in silicon photonics application scenarios such as data centers and optical transmission systems. An edge coupler, compared to optical grating, is appealing to in the application of silicon photonics due to the high coupling efficiency between standard optical fibers (SMF-28) and the sub-micron silicon wire waveguides. In this work, we proposed a novel fiber–chip edge coupler approach with a large mode size for silicon photonic wire waveguides. The edge coupler consists of a multiple structure which was fulfilled by multiple silicon nitride layers embedded in SiO2 upper cladding, curved waveguides and two adiabatic spot size converter (SSC) sections. The multiple structure can allow light directly coupling from large mode size fiber-to-chip coupler, and then the curved waveguides and SSCs transmit the evanescent field to a 220 nm-thick silicon wire waveguide based on the silicon-on-insulator (SOI) platform. The edge coupler, designed for a standard SMF-28 fiber with 8.2 μm mode field diameter (MFD) at a wavelength of 1550 nm, exhibits a mode overlap efficiency exceeding 95% at the chip facet and the overall coupling exceeding 90%. The proposed edge coupler is fully compatible with standard microfabrication processes.


  • Evanescently Coupled Waveguide InGaAs UTC-PD Having an Over 21 GHz Bandwidth Under Zero Bias

    by Siwei Sun, Song Liang, Junjie Xu, Limeng Zhang, Lu Guo, Xiao Xie, Hongliang Zhu, Wei Wang

    The design and fabrication of an evanescently coupled waveguide InGaAs unitraveling-carrier photodiode (PD) are presented. Through doping the InGaAs absorption layer gradedly, a large built-in electric field can be obtained. As a result, a 4-μm-wide 15-μm-long PD has a bandwidth larger than 21 GHz at zero bias. Passive input waveguide is integrated monolithically with the PD by a simple process, which eases the integration of PD with other optical components.


  • Passively Mode-Locked Quantum-Well Laser With a Saturable Absorber Having Gradually Varied Bandgap

    by Junjie Xu, Song Liang, Songtao Liu, Lijun Qiao, Siwei Sun, Qiufang Deng, Hongliang Zhu

    We report a novel passively mode-locked quantum-well laser, which have an asymmetric colliding pulse mode-locked structure. The saturable absorber (SA) multi-quantum wells (MQWs) of the laser have bandgap, which is gradually varied along the ridge direction realized by selective area growth technique, forming a broadband absorber. As a result, light pulses are obtained at a repetition frequency of 226 GHz with a minimum pulse width of 605 fs under an appropriate current bias. Because of the continuous variation of the SA MQW bandgap, the SA absorption peak covers a wide range of wavelength, which makes the device more immune to SA bandgap change resulted from SA reverse bias or light absorption-induced heating of the SA, compared with traditional MQW mode-locked lasers.