Jiupeng Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiupeng Cao has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Jingjin Dong
Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM) Nanjing Tech University Nanjing Jiangsu China
11 shared publicationsAifei Wang
Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM) Nanjing Tech University Nanjing Jiangsu China
9 shared publications- Feng Yan
Department of Applied Physics, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, China
9 shared publications Fangfang Wang
Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM) Nanjing Tech University Nanjing Jiangsu China
8 shared publicationsJiankai Xie
Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM) Nanjing Tech University Nanjing Jiangsu 211816 China
8 shared publicationsTianshi Qin
Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM) Nanjing Tech University Nanjing Jiangsu China
8 shared publications
Latest Publications
Crystallization Modulation and Halide Segregation Suppression in Wide‐Bandgap Perovskite for Efficient All‐Perovskite Tandem Solar Cells
Wide bandgap (WBG) perovskite solar cells (PSCs) play an essential role in tandem solar cell architectures. These architectures represent a promising approach for surpassing the efficiency limits associated with single‐junction solar cells. Nevertheless, WBG subcells encounter substantial challenges, particularly those related to inhomogeneous crystallization processes and pronounced non‐radiative recombination losses. Additionally, the oxidation of iodide ions during device operation can induce halide segregation, which significantly undermines the operational stability of the devices. In the present study, an effective strategy is introduced through the incorporation of phenylhydrazine derivatives into the perovskite solution. This method simultaneously modulates the crystallization behavior and inhibits iodide oxidation in WBG perovskite. The implementation of this strategy yields high‐quality perovskite films and leads to a marked enhancement in the photostability of WBG PSCs. Specifically, inverted single‐junction WBG PSCs with a bandgap of 1.77 eV obtained a power conversion efficiency (PCE) of 20.75%, accompanied by exceptional operational stability. Furthermore, by integrating the WBG perovskite subcell with mixed Sn‐Pb perovskite subcells, two‐terminal all‐perovskite tandem solar cells were fabricated, which demonstrated an impressive PCE of 28.63%.
Crystallization Modulation and Halide Segregation Suppression in Wide‐Bandgap Perovskite for Efficient All‐Perovskite Tandem Solar Cells
Wide bandgap (WBG) perovskite solar cells (PSCs) play an essential role in tandem solar cell architectures. These architectures represent a promising approach for surpassing the efficiency limits associated with single‐junction solar cells. Nevertheless, WBG subcells encounter substantial challenges, particularly those related to inhomogeneous crystallization processes and pronounced non‐radiative recombination losses. Additionally, the oxidation of iodide ions during device operation can induce halide segregation, which significantly undermines the operational stability of the devices. In the present study, an effective strategy is introduced through the incorporation of phenylhydrazine derivatives into the perovskite solution. This method simultaneously modulates the crystallization behavior and inhibits iodide oxidation in WBG perovskite. The implementation of this strategy yields high‐quality perovskite films and leads to a marked enhancement in the photostability of WBG PSCs. Specifically, inverted single‐junction WBG PSCs with a bandgap of 1.77 eV obtained a power conversion efficiency (PCE) of 20.75%, accompanied by exceptional operational stability. Furthermore, by integrating the WBG perovskite subcell with mixed Sn‐Pb perovskite subcells, two‐terminal all‐perovskite tandem solar cells were fabricated, which demonstrated an impressive PCE of 28.63%.
- 12 December 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (1) , 707-715
Modulating Crystallization and Suppressing Phase Segregation in Wide-Bandgap Perovskite Absorbers toward Silicon-Based Tandem Solar Cells
- 12 December 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (1) , 707-715
Modulating Crystallization and Suppressing Phase Segregation in Wide-Bandgap Perovskite Absorbers toward Silicon-Based Tandem Solar Cells
- 28 November 2025
- Published by Wiley in Angewandte Chemie
- Vol. 138 (2)
All‐in‐One Molecule Regulated Buried Interface and Crystallization of Tin–Lead Perovskite for Efficient All‐Perovskite Tandem Solar Cells
Mixed tin–lead (Sn–Pb) perovskite solar cells (PSCs) are critical for advancing all–perovskite tandem solar technologies, as they resolve the efficiency limitations of single‐junction devices. However, the widely used hole transport layer (HTL) poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) restricts performance and durability due to its acidic nature and moisture absorption. Additionally, the rapid crystallization of Sn‐containing perovskites hinders the fabrication of uniform, high‐quality mixed SnPb perovskite films. To address these challenges, this study incorporates 4‐sulfophthalic acid triammonium salt (SATS) as a multifunctional additive into both the PEDOT:PSS layer and perovskite precursor solution. SATS modifies the physicochemical properties of PEDOT:PSS and slows perovskite crystallization, promoting films with enhanced crystallinity. Through these synergistic effects, the optimized single‐junction SnPb PSCs achieve a power conversion efficiency (PCE) of 23.85%. Integrating these devices into two‐terminal all‐perovskite tandem architectures further delivers a remarkable efficiency of 28.74%.
- 28 November 2025
- Published by Wiley in Angewandte Chemie
- Vol. 138 (2)
All‐in‐One Molecule Regulated Buried Interface and Crystallization of Tin–Lead Perovskite for Efficient All‐Perovskite Tandem Solar Cells
Mixed tin–lead (Sn–Pb) perovskite solar cells (PSCs) are critical for advancing all–perovskite tandem solar technologies, as they resolve the efficiency limitations of single‐junction devices. However, the widely used hole transport layer (HTL) poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) restricts performance and durability due to its acidic nature and moisture absorption. Additionally, the rapid crystallization of Sn‐containing perovskites hinders the fabrication of uniform, high‐quality mixed SnPb perovskite films. To address these challenges, this study incorporates 4‐sulfophthalic acid triammonium salt (SATS) as a multifunctional additive into both the PEDOT:PSS layer and perovskite precursor solution. SATS modifies the physicochemical properties of PEDOT:PSS and slows perovskite crystallization, promoting films with enhanced crystallinity. Through these synergistic effects, the optimized single‐junction SnPb PSCs achieve a power conversion efficiency (PCE) of 23.85%. Integrating these devices into two‐terminal all‐perovskite tandem architectures further delivers a remarkable efficiency of 28.74%.
- 17 November 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (2) , e18800
All‐in‐One Molecule Regulated Buried Interface and Crystallization of Tin–Lead Perovskite for Efficient All‐Perovskite Tandem Solar Cells
Mixed tin–lead (Sn–Pb) perovskite solar cells (PSCs) are critical for advancing all–perovskite tandem solar technologies, as they resolve the efficiency limitations of single‐junction devices. However, the widely used hole transport layer (HTL) poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) restricts performance and durability due to its acidic nature and moisture absorption. Additionally, the rapid crystallization of Sn‐containing perovskites hinders the fabrication of uniform, high‐quality mixed SnPb perovskite films. To address these challenges, this study incorporates 4‐sulfophthalic acid triammonium salt (SATS) as a multifunctional additive into both the PEDOT:PSS layer and perovskite precursor solution. SATS modifies the physicochemical properties of PEDOT:PSS and slows perovskite crystallization, promoting films with enhanced crystallinity. Through these synergistic effects, the optimized single‐junction SnPb PSCs achieve a power conversion efficiency (PCE) of 23.85%. Integrating these devices into two‐terminal all‐perovskite tandem architectures further delivers a remarkable efficiency of 28.74%.
- 17 November 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (2) , e18800
All‐in‐One Molecule Regulated Buried Interface and Crystallization of Tin–Lead Perovskite for Efficient All‐Perovskite Tandem Solar Cells
Mixed tin–lead (Sn–Pb) perovskite solar cells (PSCs) are critical for advancing all–perovskite tandem solar technologies, as they resolve the efficiency limitations of single‐junction devices. However, the widely used hole transport layer (HTL) poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) restricts performance and durability due to its acidic nature and moisture absorption. Additionally, the rapid crystallization of Sn‐containing perovskites hinders the fabrication of uniform, high‐quality mixed SnPb perovskite films. To address these challenges, this study incorporates 4‐sulfophthalic acid triammonium salt (SATS) as a multifunctional additive into both the PEDOT:PSS layer and perovskite precursor solution. SATS modifies the physicochemical properties of PEDOT:PSS and slows perovskite crystallization, promoting films with enhanced crystallinity. Through these synergistic effects, the optimized single‐junction SnPb PSCs achieve a power conversion efficiency (PCE) of 23.85%. Integrating these devices into two‐terminal all‐perovskite tandem architectures further delivers a remarkable efficiency of 28.74%.
- 4 August 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (39)
Ultraviolet‐Controlled Radical Dopants: Suppressing Unpredictable Oxidation and Lithium Migration in Perovskite Solar Cells
Perovskite solar cells (PSCs) have achieved parity in efficiency with silicon‐based solar cells. This dependency introduces stability challenges and complicates device fabrication due to the traditional air‐oxidation doping process, which is time‐consuming, unpredictable, and requires continuous monitoring of device variability. Here, we propose two triphenyl sulfonium (TPS) salts as UV‐light‐triggered radical‐generating dopants for 2,2′,7,7′‐tetrakis [ N,N ‐di(4‐methoxyphenyl) amino]‐9,9′‐spirobifluorene(spiro‐OMeTAD). These dopants eliminate the need for air‐based oxidation, thereby simplifying fabrication while enhancing the electrical properties of spiro‐OMeTAD through efficient p‐type doping. Using this approach, we achieved a champion power conversion efficiency of 25.18%, surpassing the performance of traditional doping methods. Notably, PSCs incorporating TPS dopants and cost‐effective silver top‐electrodes demonstrated exceptional stability under various operational conditions. This work presents a scalable, cost‐effective doping strategy that addresses critical stability‐efficiency trade‐offs in PSCs, positioning them as viable contenders for commercial renewable energy applications.
- 4 August 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (39)
Ultraviolet‐Controlled Radical Dopants: Suppressing Unpredictable Oxidation and Lithium Migration in Perovskite Solar Cells
Perovskite solar cells (PSCs) have achieved parity in efficiency with silicon‐based solar cells. This dependency introduces stability challenges and complicates device fabrication due to the traditional air‐oxidation doping process, which is time‐consuming, unpredictable, and requires continuous monitoring of device variability. Here, we propose two triphenyl sulfonium (TPS) salts as UV‐light‐triggered radical‐generating dopants for 2,2′,7,7′‐tetrakis [ N,N ‐di(4‐methoxyphenyl) amino]‐9,9′‐spirobifluorene(spiro‐OMeTAD). These dopants eliminate the need for air‐based oxidation, thereby simplifying fabrication while enhancing the electrical properties of spiro‐OMeTAD through efficient p‐type doping. Using this approach, we achieved a champion power conversion efficiency of 25.18%, surpassing the performance of traditional doping methods. Notably, PSCs incorporating TPS dopants and cost‐effective silver top‐electrodes demonstrated exceptional stability under various operational conditions. This work presents a scalable, cost‐effective doping strategy that addresses critical stability‐efficiency trade‐offs in PSCs, positioning them as viable contenders for commercial renewable energy applications.
- 4 August 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (39) , e202509383
Ultraviolet‐Controlled Radical Dopants: Suppressing Unpredictable Oxidation and Lithium Migration in Perovskite Solar Cells
Perovskite solar cells (PSCs) have achieved parity in efficiency with silicon‐based solar cells. This dependency introduces stability challenges and complicates device fabrication due to the traditional air‐oxidation doping process, which is time‐consuming, unpredictable, and requires continuous monitoring of device variability. Here, we propose two triphenyl sulfonium (TPS) salts as UV‐light‐triggered radical‐generating dopants for 2,2′,7,7′‐tetrakis [ N,N ‐di(4‐methoxyphenyl) amino]‐9,9′‐spirobifluorene(spiro‐OMeTAD). These dopants eliminate the need for air‐based oxidation, thereby simplifying fabrication while enhancing the electrical properties of spiro‐OMeTAD through efficient p‐type doping. Using this approach, we achieved a champion power conversion efficiency of 25.18%, surpassing the performance of traditional doping methods. Notably, PSCs incorporating TPS dopants and cost‐effective silver top‐electrodes demonstrated exceptional stability under various operational conditions. This work presents a scalable, cost‐effective doping strategy that addresses critical stability‐efficiency trade‐offs in PSCs, positioning them as viable contenders for commercial renewable energy applications.
- 4 August 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (39) , e202509383
Ultraviolet‐Controlled Radical Dopants: Suppressing Unpredictable Oxidation and Lithium Migration in Perovskite Solar Cells
Perovskite solar cells (PSCs) have achieved parity in efficiency with silicon‐based solar cells. This dependency introduces stability challenges and complicates device fabrication due to the traditional air‐oxidation doping process, which is time‐consuming, unpredictable, and requires continuous monitoring of device variability. Here, we propose two triphenyl sulfonium (TPS) salts as UV‐light‐triggered radical‐generating dopants for 2,2′,7,7′‐tetrakis [ N,N ‐di(4‐methoxyphenyl) amino]‐9,9′‐spirobifluorene(spiro‐OMeTAD). These dopants eliminate the need for air‐based oxidation, thereby simplifying fabrication while enhancing the electrical properties of spiro‐OMeTAD through efficient p‐type doping. Using this approach, we achieved a champion power conversion efficiency of 25.18%, surpassing the performance of traditional doping methods. Notably, PSCs incorporating TPS dopants and cost‐effective silver top‐electrodes demonstrated exceptional stability under various operational conditions. This work presents a scalable, cost‐effective doping strategy that addresses critical stability‐efficiency trade‐offs in PSCs, positioning them as viable contenders for commercial renewable energy applications.
Self‐Assembled Charge Bridge Path at the Sn‐Pb Perovskite/C 60 Interface for High‐Efficiency All‐Perovskite Tandem Solar Cells
Narrow bandgap mixed tin‐lead perovskite solar cells (PSCs) have garnered substantial research interest owing to their remarkable optoelectronic properties. However, non‐radiative recombination and carrier transport losses at the interface between the perovskite layer and the charge transport layer (C 60 ) significantly reduce the overall efficiency of mixed tin‐lead PSCs. To address this challenge, 9‐Fluorenylmethyl carbazate (9FC) is incorporated at the interface between perovskite and C 60 . The hydrazide group present in 9FC effectively mitigates the oxidation of Sn 2+ . Furthermore, 9FC can engage in chemical bonding with the perovskite, while the outward‐facing aromatic rings create effective π – π interactions with C 60 , thereby promoting enhanced interfacial charge transfer. The highest‐performing mixed tin‐lead PSCs achieve a power conversion efficiency (PCE) of 23.97%, accompanied by an impressive open‐circuit voltage of 0.91 V. Additionally, these tin‐lead PSCs facilitate the development of highly efficient two‐terminal and four‐terminal all‐perovskite tandem solar cells, which demonstrate efficiencies of 27.01% and 28.07%, respectively.
Self‐Assembled Charge Bridge Path at the Sn‐Pb Perovskite/C 60 Interface for High‐Efficiency All‐Perovskite Tandem Solar Cells
Narrow bandgap mixed tin‐lead perovskite solar cells (PSCs) have garnered substantial research interest owing to their remarkable optoelectronic properties. However, non‐radiative recombination and carrier transport losses at the interface between the perovskite layer and the charge transport layer (C 60 ) significantly reduce the overall efficiency of mixed tin‐lead PSCs. To address this challenge, 9‐Fluorenylmethyl carbazate (9FC) is incorporated at the interface between perovskite and C 60 . The hydrazide group present in 9FC effectively mitigates the oxidation of Sn 2+ . Furthermore, 9FC can engage in chemical bonding with the perovskite, while the outward‐facing aromatic rings create effective π – π interactions with C 60 , thereby promoting enhanced interfacial charge transfer. The highest‐performing mixed tin‐lead PSCs achieve a power conversion efficiency (PCE) of 23.97%, accompanied by an impressive open‐circuit voltage of 0.91 V. Additionally, these tin‐lead PSCs facilitate the development of highly efficient two‐terminal and four‐terminal all‐perovskite tandem solar cells, which demonstrate efficiencies of 27.01% and 28.07%, respectively.
- 12 December 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (6)
Synergistic Treatments of Bulk and Surface in Tin‐Lead Mixed Perovskite for Efficient All‐Perovskite Tandem Solar Cells
Narrow‐bandgap (NBG) perovskites have attracted significant attention for their promising potential as light‐absorbing materials in tandem solar cells. However, tin‐lead mixed perovskites face a major limitation of the facile oxidation of Sn2⁺, leading to Sn vacancies in the perovskite films. In this study, sodium triacetoxyborohydride (STAB) is introduced as an antioxidant, while potassium (5‐bromo‐2‐fluoropyridin‐3‐yl)trifluoroborate (PBFT) is employed as a surface modifier for mixed tin‐lead perovskites. This combined approach not only suppresses Sn2⁺ oxidation but also promotes the formation of high‐quality perovskite films. Furthermore, the induced energy band bending at the perovskite/C60 interface substantially enhances charge transfer. Consequently, the optimized device achieves a power conversion efficiency (PCE) of 23.41% with excellent illumination stability. When paired with a wide‐bandgap (WBG) semi‐transparent perovskite solar cell (PSC), the resulting four‐terminal (4‐T) all‐perovskite tandem solar cell attains a remarkable efficiency of 27.37%.
- 12 December 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (6)
Synergistic Treatments of Bulk and Surface in Tin‐Lead Mixed Perovskite for Efficient All‐Perovskite Tandem Solar Cells
Narrow‐bandgap (NBG) perovskites have attracted significant attention for their promising potential as light‐absorbing materials in tandem solar cells. However, tin‐lead mixed perovskites face a major limitation of the facile oxidation of Sn2⁺, leading to Sn vacancies in the perovskite films. In this study, sodium triacetoxyborohydride (STAB) is introduced as an antioxidant, while potassium (5‐bromo‐2‐fluoropyridin‐3‐yl)trifluoroborate (PBFT) is employed as a surface modifier for mixed tin‐lead perovskites. This combined approach not only suppresses Sn2⁺ oxidation but also promotes the formation of high‐quality perovskite films. Furthermore, the induced energy band bending at the perovskite/C60 interface substantially enhances charge transfer. Consequently, the optimized device achieves a power conversion efficiency (PCE) of 23.41% with excellent illumination stability. When paired with a wide‐bandgap (WBG) semi‐transparent perovskite solar cell (PSC), the resulting four‐terminal (4‐T) all‐perovskite tandem solar cell attains a remarkable efficiency of 27.37%.
- Open Access
High‐Performance Ideal Bandgap Sn‐Pb Mixed Perovskite Solar Cells Achieved by MXene Passivation
Ideal bandgap (1.3–1.4 eV) Sn‐Pb mixed perovskite solar cells (PSC) hold the maximum theoretical efficiency given by the Shockley–Queisser limit. However, achieving high efficiency and stable Sn‐Pb mixed PSCs remains challenging. Here, piperazine‐1,4‐diium tetrafluoroborate (PDT) is introduced as spacer for bottom interface modification of ideal bandgap Sn‐Pb mixed perovskite. This spacer enhances the quality of the upper perovskite layer and forms better energy band alignment, leading to enhanced charge extraction at the hole transport layer (HTL)/perovskite interface. Then, 2D Ti 3 C 2 T x MXene is incorporated for surface treatment of perovskite, resulting in reduced surface trap density and enhanced interfacial electron transfer. The combinations of double‐sided treatment afford the ideal bandgap PSC with a high efficiency of 20.45% along with improved environment stability. This work provides a feasible guideline to prepare high‐performance and stable ideal‐bandgap PSCs.
Open AccessHigh‐Performance Ideal Bandgap Sn‐Pb Mixed Perovskite Solar Cells Achieved by MXene Passivation
Ideal bandgap (1.3–1.4 eV) Sn‐Pb mixed perovskite solar cells (PSC) hold the maximum theoretical efficiency given by the Shockley–Queisser limit. However, achieving high efficiency and stable Sn‐Pb mixed PSCs remains challenging. Here, piperazine‐1,4‐diium tetrafluoroborate (PDT) is introduced as spacer for bottom interface modification of ideal bandgap Sn‐Pb mixed perovskite. This spacer enhances the quality of the upper perovskite layer and forms better energy band alignment, leading to enhanced charge extraction at the hole transport layer (HTL)/perovskite interface. Then, 2D Ti 3 C 2 T x MXene is incorporated for surface treatment of perovskite, resulting in reduced surface trap density and enhanced interfacial electron transfer. The combinations of double‐sided treatment afford the ideal bandgap PSC with a high efficiency of 20.45% along with improved environment stability. This work provides a feasible guideline to prepare high‐performance and stable ideal‐bandgap PSCs.
- Open Access
Flexible UV photodetector based on copper tetraiodogallate (CuGaI4) film
The Cu‐based halide semiconductor CuGaI4 was prepared by a high‐temperature melting method. Optoelectronic characterization and density functional theory calculations of CuGaI4 reveal a direct bandgap of 2.9 eV. The corresponding UV photodetector (PD) based on CuGaI4 demonstrates excellent UV response and rapid response time. In addition, a flexible PD based on CuGaI4 is prepared, which also displays excellent photoresponse characteristics and mechanical stability. This work provides a systematic study of this novel Cu‐based halide semiconductor and demonstrates the great potential of CuGaI4 for future UV optoelectronic devices.
Open AccessFlexible UV photodetector based on copper tetraiodogallate (CuGaI4) film
The Cu‐based halide semiconductor CuGaI4 was prepared by a high‐temperature melting method. Optoelectronic characterization and density functional theory calculations of CuGaI4 reveal a direct bandgap of 2.9 eV. The corresponding UV photodetector (PD) based on CuGaI4 demonstrates excellent UV response and rapid response time. In addition, a flexible PD based on CuGaI4 is prepared, which also displays excellent photoresponse characteristics and mechanical stability. This work provides a systematic study of this novel Cu‐based halide semiconductor and demonstrates the great potential of CuGaI4 for future UV optoelectronic devices.