SASk Zeeshan Ali

Sk Zeeshan Ali

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sk Zeeshan Ali has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Probabilities of sediment entrainment and estimation of bedload flux

    by Raviteja Karanam, Sk Zeeshan Ali, Subhasish Dey

    We explore the probabilities of sediment entrainment in turbulent flow over a loosely packed bed of particles in tetrahedral and square-pyramid configurations. The rolling and lifting probabilities of a target particle are derived by considering the normal, lognormal and Gram–Charlier distributions to characterize either the area-averaged instantaneous streamwise velocity or the area-averaged velocity fluctuation. For each distribution, the mean rolling and lifting probabilities are obtained by incorporating the effects of particle exposure and entrainment angle. The mean rolling probability increases with the Shields parameter attaining a maximum value and then decreases. Conversely, the mean lifting probability increases with the Shields parameter. This study successfully captures experimental data for both rolling and lifting probabilities and effectively differentiates between the rolling and lifting modes. The effects of flow regime and sediment non-uniformity on the mean rolling and lifting probabilities are examined. The mean rolling probability corresponding to the threshold of sediment entrainment is obtained as a function of the particle parameter. Finally, using the mean lifting probability, the model developed at the particle scale is extended to the continuum scale to estimate the bedload flux. The predicted bedload flux shows excellent agreement with the experimental data.

  • Scaling transitions in plane turbulent wall jets

    by Sk Zeeshan Ali, Subhasish Dey

    In the fully developed region of a plane turbulent wall jet, the key jet parameters, including the jet velocity U m , jet half-width z 1/2 and wall shear stress $ \tau_{0}$ , follow the classical power-law scaling with the streamwise distance x : U m $v$ / M 0 ∼ ( xM 0 / $v$ 2 ) − α , z 1/2 M 0 / $v$ 2 ∼ ( xM 0 / $v$ 2 ) β and $ \tau_{0}$ $v$ 2 /( ρ $M_{0}^{2}$ ) ∼ ( xM 0 / $v$ 2 ) − χ , where M 0 is the source kinematic momentum flux, $v$ is the coefficient of kinematic viscosity of fluid, ρ is the mass density of fluid and α , β and χ are the positive scaling exponents. We present a theoretical framework to determine these exponents. Our framework reveals that each jet parameter exhibits a scaling transition. This transition is driven by a shift in the scaling law of the skin-friction coefficient as the Reynolds number Re m = U m z m / $v$ changes over from Re m < 8000 to Re m > 10 000, where z m is the wall-normal location corresponding to the jet velocity. Specifically, α transitions from 4(1 + γ )/(9 − γ ) to 13(1 + γ )/[2(14 − γ )], β from 8/(9 − γ ) to 13/(14 − γ ) and χ from (9 + 7 γ )/(9 − γ ) to (14 + 12 γ )/(14 − γ ), where γ ≈ 0.05 is a parameter determined from experiments. We validate the theoretical predictions against extensive experimental datasets from the literature.


  • Vertically averaged and moment equations for free surface flows: Pressure-Poisson solver, breaking waves, and morphodynamic modeling

    by Oscar Castro-Orgaz, Francisco Nicolás Cantero-Chinchilla, Sk Zeeshan Ali, Subhasish Dey

    Simulating unsteady free surface flows with full three-dimensional (3D) Navier–Stokes (N–S) equations is computationally expensive, so simplified models beyond shallow flow approximations are needed for large-scale river and ocean dynamics. In this study, we focus on a Vertically Averaged and Moment (VAM) equations approach for modeling unsteady free surface flows. The VAM equations are a quasi-3D modeling method derived from a variational approximation of the N–S equations, and therefore are not limited by the shallow flow approximation. The VAM models can approximate the N–S equations in a variety of free surface flow problems with good accuracy, but there is a lack of systematic consideration of these methods in the literature, which has slowed their adoption and development. Here, the VAM equations are presented, and several advances are introduced. For instance, a novel and efficient numerical method that easily enables the transformation of a Saint Venant solver into a VAM solver is presented. The nonhydrostatic pressure field is determined by a projection method inspired by Chorin's technique, notably without requiring iterative processes. Key physical aspects of the VAM model are then systematically highlighted, namely form drag over bedforms, frequency dispersion of water waves under nonlinear conditions as in Favre waves and collision of surges, turbulence modeling in the canonical case of uniform flow, breaking waves including dam-break flows and hydraulic jumps, and morphodynamic modeling, which encompasses geomorphic dam-break waves, erosion of dikes due to overtopping, and the generation and migration of antidunes in fluvial streams.


  • Rolling and lifting thresholds of sediment entrainment: effects of bed particle arrangement, particle exposure and slip-spinning motion

    by Sk Zeeshan Ali, Raviteja Karanam, Subhasish Dey

    We explore the rolling and lifting thresholds of sediment entrainment in turbulent flow, focusing on loosely packed bed sediment particles in tetrahedral and square pyramid arrangements. In steady uniform flow, we thoroughly analyse the forces acting on a target particle to determine the threshold Shields parameters in both rolling and lifting modes for various relative exposures. The effects of slip-spinning motion of the target particle on rolling and lifting thresholds are examined through numerical experiments, comparing cases without and with slip-spinning motion. In both cases, for a given relative exposure, the lifting threshold for a given particle parameter is higher than the rolling threshold. In rough flow, both thresholds increase with a decrease in relative exposure. For smaller relative exposures, the rolling and lifting thresholds with slip-spinning motion are lower than those without slip-spinning motion. However, for larger relative exposures, the effects of slip-spinning motion on rolling and lifting thresholds are minimal. The influence of bed particle arrangement is limited to the rolling threshold. For non-uniform sediment, in rough flow, both thresholds corresponding to the average relative exposure increase as the relative particle size increases. The present study satisfactorily captures the experimental data of both uniform and non-uniform sediment.


  • The universal two-thirds law of pipeline scour

    by Subhasish Dey, Sk. Zeeshan Ali

    The estimation of scour depth under pipelines, aligned transversely to river flow, has attracted much attention because of its importance in hydraulic engineering. Pipeline scour results from the interaction between the wake vortices induced downstream of the pipeline and the sediment bed beneath it. The core insight of this study is to seek a universal law that governs sediment-bed scour beneath pipelines in steady flow, particularly under the clear-water condition. The analysis begins with an approach that incorporates the similarity concept, with a specific focus on the incomplete similarity in the asymptotic function of the ratio of particle size to scour depth ratio as a power law. The power law exponent can be determined exclusively through Kolmogorov's energy cascade theory. Stemming from Kolmogorov's energy cascade theory (also called the phenomenological theory of turbulence), a universal law emerges, revealing that the equilibrium scour depth to pipe diameter ratio follows a two-thirds scaling law with a newly introduced “pipeline-scour number,” which encapsulates all key factors influencing pipeline scour. This number includes variables such as the approach mean flow velocity and depth, the threshold shear velocity for sediment motion, and the sediment particle size. It also captures essential hydrodynamic forces, including inertia, drag, shear, and threshold shear forces. Moreover, the scaling law incorporates an additional term that involves the drag coefficient with an exponent of 2/3, thereby accounting for the influence of the pipe shape on the equilibrium scour depth. The derived universal law is validated using the experimental data.


  • Scaling laws of turbulent wall-jet scour: Planar and circular wall jets

    by Subhasish Dey, Sk Zeeshan Ali

    A turbulent wall jet issuing tangentially over a loose sediment bed induces significant erosion, leading to the development of a scour hole. This perspective article presents a generalized scaling framework for determining the equilibrium scour depths caused by planar and circular wall jets. It applies the concept of similarity, including an incomplete similarity in the power-law asymptotic function of particle size to scour depth ratio. This framework demonstrates that the similarity exponent can be exclusively determined through the phenomenological theory of turbulence. The scaling laws reveal that the nondimensional scour depth obeys a linear-law with the respective planar and circular wall-jet scour numbers, which depend on issuing jet size, jet velocity, bed particle size, and threshold shear velocity. Moreover, the analysis reveals that for a given jet thickness equal to the jet diameter, the circular wall-jet scour number scales with the 3/5 power of the planar wall-jet scour number. The approach is extensively validated with the experimental data over a range of key parameters. The scaling laws provide valuable insights into the relationship between nondimensional scour depth and key hydrodynamic forces, including inertia, particle drag, shear, and threshold shear forces.


  • Formation of alternate river bars in submerged vegetated flows

    by Rajesh K. Mahato, Sk Zeeshan Ali, Subhasish Dey, Francisco N. Cantero-Chinchilla, Oscar Castro-Orgaz, Luca Solari

    In this paper, we explore the formation of alternate river bars in the presence of submerged vegetation, modelled as uniformly spaced rigid cylinders. We analyse the stability of the erodible bed by coupling the Exner equation for bed evolution with the continuity and momentum equations for the fluid phase. Through linear and weakly nonlinear stability analyses, we predict the equilibrium wavelength and amplitude of vegetated alternate bars. The computational results hinge on two key parameters: the vegetation aspect ratio (vegetation height to diameter ratio) and the vegetation packing density (dimensionless frontal area per unit volume). We present streamwise flow velocity profiles for different vegetation aspect ratios and vegetation packing densities. We find that the equilibrium wavelength decreases with higher vegetation aspect ratio and vegetation packing density. Vegetation reduces the minimum channel aspect ratio required for the braided channel formation and the threshold channel aspect ratio for the alternate bar formation. The equilibrium amplitude increases with vegetation aspect ratio but reduces with vegetation packing density, eventually reaching a constant value. The predicted alternate bar wavelength and amplitude align with field observations in the Arc River, Hooge Raam River, Alpine Rhine River and Isère River.


  • Shallow water hydrodynamics: Surge propagation and sill-controlled flows

    by Francisco Nicolás Cantero-Chinchilla, Oscar Castro-Orgaz, Sk Zeeshan Ali, Subhasish Dey

    Accurate flow models are crucial for simulating shallow water hydrodynamics, particularly in predicting and mitigating the impacts of extreme events involving free-surface flows. Many of these extreme scenarios in river environments involve fluid dynamics with significant dynamic pressures, invalidating the use of standard Saint-Venant-type models. This study presents a robust and accurate novel alternative based on the Reynolds-averaged Navier–Stokes (RANS) equations solved through variational methods. Despite their potential, variational methods have been underutilized in the literature, and their application has been limited to low-level expansions. Moreover, they are rarely validated against experiments that simulate complex flows. This study addresses both challenges. First, a general mathematical framework is developed for the variational RANS (VR) model of arbitrary high-level. The VR level III model is presented and is solved numerically using a robust finite volume-finite difference solver for turbulence flow modeling. Second, an extensive experimental program was conducted to validate this new flow modeling tool, focusing on two challenging flow scenarios. The first scenario involves the propagation of turbulent breaking waves over an irregular, uneven bathymetry—conditions similar to those observed during bedform development in riverine environments. This scenario involved the experimental characterization of unsteady surges over an array of obstacles in series. The second scenario investigated sill-controlled released discharges, similar to those occurring in estuary inlets with sediment bars. Comparisons between the new experimental data and the predictions from the VR level III model reveal the model's accuracy and robustness, making it a highly suitable tool for simulating free-surface flows.


  • Suspended-Load Transport

    by Subhasish Dey, Sk Zeeshan Ali

  • Total-Load Transport

    by Subhasish Dey, Sk Zeeshan Ali