Luc Nicoleau
Research Subjects
Research Interests
Luc Nicoleau has a total of 88 co-authors. Here are the top co-authors by number of shared publications:
- André Nonat
Institut Carnot de Bourgogne, UMR 5209 CNRS-Université de Bourgogne, 9 Av. A. Savary, BP 47 870, F-21078 DIJON Cedex, France
10 shared publications - Christophe Labbez
ICB, UMR 6303 CNRS, Université de Bourgogne, F-21078 Dijon Cedex, France
3 shared publications - Damien Daval
ISTerre, CNRS, IRD, Université Gustave Eiffel, Université Grenoble Alpes, Université Savoie Mont Blanc
2 shared publications E. Schreiner
2 shared publicationsGoran Kovačević
Ruđer Bošković Institute, Zagreb, Croatia
2 shared publications- Helmut Cölfen
University of Konstanz
2 shared publications
Latest Publications
- Open Access
- 26 June 2025
- Published by Elsevier in Cement and Concrete Research
- Vol. 197
Citric, tartaric, and succinic acid effects on C3S dissolution and the nucleation kinetics of C-S-H and portlandite
- 26 June 2025
- Published by Elsevier in Cement and Concrete Research
- Vol. 197
Open AccessCitric, tartaric, and succinic acid effects on C3S dissolution and the nucleation kinetics of C-S-H and portlandite
- 1 October 2018
- Published by Elsevier in Chemical Geology
- Vol. 497, 64-73
Experimental study and numerical simulation of the dissolution anisotropy of tricalcium silicate
- 1 October 2018
- Published by Elsevier in Chemical Geology
- Vol. 497, 64-73
Experimental study and numerical simulation of the dissolution anisotropy of tricalcium silicate
- 17 April 2018
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 30 (9) , 2895-2904
Two-Step Nucleation Process of Calcium Silicate Hydrate, the Nanobrick of Cement
- 17 April 2018
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 30 (9) , 2895-2904
Two-Step Nucleation Process of Calcium Silicate Hydrate, the Nanobrick of Cement
- 1 February 2018
- Published by Elsevier in Cement and Concrete Research
- Vol. 104, 118-122
Rate-limiting reaction of C 3 S hydration - A reply to the discussion “A new view on the kinetics of tricalcium silicate hydration” by E. Gartner
- 1 February 2018
- Published by Elsevier in Cement and Concrete Research
- Vol. 104, 118-122
Rate-limiting reaction of C 3 S hydration - A reply to the discussion “A new view on the kinetics of tricalcium silicate hydration” by E. Gartner
- Open Access
- 30 December 2017
- Published by Rilem Publications SARL in RILEM Technical Letters
- Vol. 2, 90-98
Advances in dissolution understanding and their implications for cement hydration
Recent advances in bridging kinetics and thermodynamics of mineral dissolution have opened new horizons in our understanding of the role of dissolution in cement hydration. Indeed most hydration kinetic regimes of alite can be rationally envisioned from a dissolution perspective. This short note reviews some key findings on dissolution mechanisms and their implication for cementitious systems.
- 30 December 2017
- Published by Rilem Publications SARL in RILEM Technical Letters
- Vol. 2, 90-98
Open AccessAdvances in dissolution understanding and their implications for cement hydration
Recent advances in bridging kinetics and thermodynamics of mineral dissolution have opened new horizons in our understanding of the role of dissolution in cement hydration. Indeed most hydration kinetic regimes of alite can be rationally envisioned from a dissolution perspective. This short note reviews some key findings on dissolution mechanisms and their implication for cementitious systems.
- Open Access
- 3 November 2017
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 3 (11) , e1701216
Mesocrystalline calcium silicate hydrate: A bioinspired route toward elastic concrete materials
Controlled aggregation of polymer-stabilized calcium silicate hydrate nanoparticles leads to elastic cementitious materials.
- 3 November 2017
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 3 (11) , e1701216
Open AccessMesocrystalline calcium silicate hydrate: A bioinspired route toward elastic concrete materials
Controlled aggregation of polymer-stabilized calcium silicate hydrate nanoparticles leads to elastic cementitious materials.
- 1 August 2017
- Published by Elsevier in Cement and Concrete Research
- Vol. 98, 36-43
Determination of Ca 2+ complexation constants by monomeric silicate species at 25 °C with a Ca 2+ ion selective electrode
- 1 August 2017
- Published by Elsevier in Cement and Concrete Research
- Vol. 98, 36-43
Determination of Ca 2+ complexation constants by monomeric silicate species at 25 °C with a Ca 2+ ion selective electrode
- Top Cited Papers
- 26 April 2017
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 100 (7) , 2746-2773
Cements in the 21st century: Challenges, perspectives, and opportunities
Since its widespread use in concrete began over 100 years ago, the chemical composition and physical properties of portland cement have changed only incrementally in response to various and competing pressures of constructability and cost. Instead, the construction demands have been met largely through the development and introduction of chemical admixtures that are added to the binder during mixing. These same demands persist into the 21st Century and are just as important now as before, yet newer driving forces are simultaneously pushing the industry both toward more automated construction and toward more sustainable concrete materials that generate lower CO2 and have longer service life. These new cement binder formulations and new construction technologies are expected to go well outside the bounds of traditional portland cement compositions and batching and placing practices. This study examines the origins of these new market demands and the influence they are having on the construction industry. Seven scientific or technological pathways are identified that will be critical for enabling the kinds of transformational changes in cement and concrete construction that the industry needs: (i) additive manufacturing, (ii) designer admixtures, (iii) curated materials data repositories, (iv) computationally designed composites, (v) big data and smart materials, (vi) alternative binder compositions, and (vii) next‐generation instrumentation.
- 26 April 2017
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 100 (7) , 2746-2773
Top Cited PapersCements in the 21st century: Challenges, perspectives, and opportunities
Since its widespread use in concrete began over 100 years ago, the chemical composition and physical properties of portland cement have changed only incrementally in response to various and competing pressures of constructability and cost. Instead, the construction demands have been met largely through the development and introduction of chemical admixtures that are added to the binder during mixing. These same demands persist into the 21st Century and are just as important now as before, yet newer driving forces are simultaneously pushing the industry both toward more automated construction and toward more sustainable concrete materials that generate lower CO2 and have longer service life. These new cement binder formulations and new construction technologies are expected to go well outside the bounds of traditional portland cement compositions and batching and placing practices. This study examines the origins of these new market demands and the influence they are having on the construction industry. Seven scientific or technological pathways are identified that will be critical for enabling the kinds of transformational changes in cement and concrete construction that the industry needs: (i) additive manufacturing, (ii) designer admixtures, (iii) curated materials data repositories, (iv) computationally designed composites, (v) big data and smart materials, (vi) alternative binder compositions, and (vii) next‐generation instrumentation.
- 1 August 2016
- Published by Elsevier in Cement and Concrete Research
- Vol. 86, 1-11
A new view on the kinetics of tricalcium silicate hydration
- 1 August 2016
- Published by Elsevier in Cement and Concrete Research
- Vol. 86, 1-11
A new view on the kinetics of tricalcium silicate hydration
- 2 May 2016
- Published by Walter de Gruyter GmbH in Zeitschrift für Physikalische Chemie
- Vol. 230 (9) , 1411-1424
Revised Atomistic Models of the Crystal Structure of C–S–H with high C/S Ratio
The atomic structure of calcium-silicate-hydrate (C1.67–S–H x ) has been studied. Atomistic C–S–H models suggested in our previous study have been revised in order to perform a direct comparison of energetic stability of the different structures. An extensive set of periodic structures of C–S–H with variation of water content was created, and then optimized using molecular dynamics with reactive force field ReaxFF and quantum chemical semiempirical method PM6. All models show organization of water molecules inside the structure of C–S–H. The new geometries of C–S–H, reported in this paper, show lower relative energy with respect to the geometries from the original definition of C–S–H models. Model that corresponds to calcium enriched tobermorite structure has the lowest relative energy and the density closest to the experimental values.
- 2 May 2016
- Published by Walter de Gruyter GmbH in Zeitschrift für Physikalische Chemie
- Vol. 230 (9) , 1411-1424
Revised Atomistic Models of the Crystal Structure of C–S–H with high C/S Ratio
The atomic structure of calcium-silicate-hydrate (C1.67–S–H x ) has been studied. Atomistic C–S–H models suggested in our previous study have been revised in order to perform a direct comparison of energetic stability of the different structures. An extensive set of periodic structures of C–S–H with variation of water content was created, and then optimized using molecular dynamics with reactive force field ReaxFF and quantum chemical semiempirical method PM6. All models show organization of water molecules inside the structure of C–S–H. The new geometries of C–S–H, reported in this paper, show lower relative energy with respect to the geometries from the original definition of C–S–H models. Model that corresponds to calcium enriched tobermorite structure has the lowest relative energy and the density closest to the experimental values.