CCCristina Cuerno-Rejado

Cristina Cuerno-Rejado

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cristina Cuerno-Rejado has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A prospective method to support Unmanned Aircraft Systems operators in the application of Specific Operations Risk Assessment

    by Rebeca González-Pérez, Álvaro Gómez-Rodríguez, Alejandro Sanchez-Carmona, Cristina Cuerno-Rejado

    Within the current European regulatory framework, in order to be authorised to perform Unmanned Aircraft Systems (UAS) flights under the specific category of operations, applicants are required to conduct an operational risk assessment. The European Union Aviation Safety Agency (EASA) selects the Specific Operations Risk Assessment (SORA) methodology as its recommended means to perform this risk evaluation. However, some aspects of this methodology and its application are left relatively open, especially regarding the compliance with the requirements of its safety measures, called Operational Safety Objectives (OSOs). This might complicate the application of SORA, which would benefit from further guidance for its quantitative implementation. Seeking to streamline some aspects of this methodology, this paper presents the Fish Shoal Method (FSM), which combines SORA with two widespread risk analysis methods: bow-tie and Fault Tree Analysis. The synthesis of these methodologies results in a novel method that aims to provide clarity to SORA and to support applicants in the task of determining if their safety requirements are properly substantiated. The practical feasibility of FSM is demonstrated through a worked numerical example of a real UAS operation, focused on the requirements of the procedure-related OSO#08. FSM serves as a guidance to assess the performance of OSOs and make a preliminary estimation of whether the target level of safety of the operation is achieved. Since FSM formalises the main elements of SORA following a causality approach, it also allows the identification of those safety-critical items of the UAS operation that may require further attention. The outcomes of this practical example show that, even in low-risk operations, where the requirements of safety measures are less stringent, the target level of safety for OSOs aimed at human factors are too demanding from a quantitative point of view.

  • Open Access

    Recent advances in active flutter suppression: a comprehensive review

    by Álvaro Cobo-González, Rodney Rodríguez-Robles, Cristina Cuerno-Rejado

    Active flutter suppression (AFS) is currently one of the most prolific areas of research within the aeroelasticity domain, driven by advances in computational capabilities and the increasing importance of weight reduction in the aerospace industry. The rapid progress of AFS, coupled with the growing need for flutter control in non-conventional aircraft, underscores the need for an up-to-date review in this field. This paper presents a systematic review of recent AFS advances, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines to ensure traceability and updatability. The review reveals two dominant research trends: the development of increasingly sophisticated control algorithms for conventional control-surface-based AFS, and the application of technologically mature algorithms to alternative control strategies, including morphing technologies and flow- and vibration-based solutions. A comprehensive classification of AFS algorithms is proposed to support the selection of suitable control approaches for different applications, and the advantages and limitations of alternative control strategies are critically discussed. The analysis identifies the synthesis of novel algorithms tailored to non-traditional control strategies, the exploration of multi-actuated and spanwise-deformable morphing wings and the extension of AFS studies to transonic, supersonic and hypersonic flight regimes as key research gaps. The need for full-aircraft models, experimental validation and the development of reference test cases for objective algorithm comparison is also highlighted.

  • Open Access

    Gust Behaviour Analysis of Fixed-Wing Multi-Mission Remotely Piloted Aircraft

    by Carmelo-Javier Villanueva-Cañizares, Álvaro Gómez-Rodríguez, Cristina Cuerno-Rejado

    Studying the effect of gusts on aircraft is an essential task in aerodynamic and structural design and analysis, as well as in airworthiness certification. The singular design and operational characteristics of Remotely Piloted Aircraft (RPA) demand a specific study of gust effects on these vehicles. This investigation uses the discrete gust criterion prescribed in current fixed-wing RPA codes to analyse the gust behaviour of RPA from a conceptual design viewpoint. The results obtained from the flight envelope analysis allow us to assess the influence of stall, manoeuvring, and gust effects on the overall envelope, with these aspects showing significant differences with respect to conventionally piloted aircraft.

  • Open Access

    Current Trends and Challenges in Unconventional Aircraft Conceptual Design

    by Álvaro Cobo-González, Cristina Cuerno-Rejado

    Unconventional aircraft configurations hold great potential for improving air transport efficiency and reducing aviation’s contribution to global warming. However, these novel layouts require robust evidence of their advantages from the conceptual design phase to justify the substantial development costs they entail. Computerized design environments provide the most suitable framework for the conceptual design of unconventional aircraft. This paper proposes an original taxonomy of unconventional aircraft configurations tailored to computerized design environments, reviews the existing tools with such design capabilities, and identifies the current trends and challenges in this field.

  • Open Access

    Gust Behaviour and Envelope Build-Up Process for Fixed-Wing Multi-Mission Remotely Piloted Aircraft

    by Álvaro Gómez-Rodríguez, Carmelo-Javier Villanueva-Cañizares, Cristina Cuerno-Rejado

    The study of aircraft gust behaviour is essential in aerodynamic and structural design and analysis, as well as in airworthiness certification. The particularities of fixed-wing Remotely Piloted Aircraft (RPA) demand a specific study of gust effects on these vehicles and their implications in RPA design and operation. The research presented here addresses the investigation of gust behaviour of RPA within the frame of conceptual design through three complementary approaches, which are respectively based on the assessment of gust and manoeuvring envelopes of RPA, the modelisation of multi-mission flight profiles of RPA towards the evaluation of the variations in gust load factor along the mission, and the analysis of the interaction of RPA conceptual design parameters with gust behaviour. These approaches are applied to various case studies, providing several key insights into the gust behaviour characteristics of RPA. These include the assessment of the operational conditions in which gust-induced stall may occur and the way in which they interact with typical mission conditions of RPA, the evaluation of the impact of mission parameters in RPA gust response along with the capability of identifying the most critical gust load factor condition for the set of considered design missions, and the ways in which undesirable gust effects may be mitigated in the conceptual design stage through the change in overall RPA design parameters.

  • Open Access

    Development of the Architecture of a Conceptual Design Tool for Manned and Unmanned Fixed-Wing Aircraft

    by Rebeca González-Pérez, Alejandro Sanchez-Carmona, Cristina Cuerno-Rejado

    Aircraft conceptual design is an iterative process that seeks to obtain a feasible design that meets a series of mission and configuration requirements. Starting with several guesses regarding the initial sizing and aerodynamics of the future aircraft, a first resulting general layout is found, which is then subjected to trade studies where initial assumptions are altered in search of a refined design. With the aim of enhancing design solutions and reducing time costs derived from calculations, the authors of the present paper have developed ARCADE (AiRcraft ConceptuAl DEsign Tool), a framework that automates, in multiple thematic modules, the steps and calculations needed for the conceptual design process of fixed-wing aircraft. This work presents the basis for the early architecture of ARCADE, developed in Python and focused on the use of data retrieved from existing aircraft for the first design hypotheses. Initial findings of the use of ARCADE show a small relative error between the first parameter guesses, made based on similar aircraft, and the results of the next design iteration, which are independent of reference aircraft. This suggests that the design parameters of the target aircraft are accurately guessed when using existing aircraft information for the initial estimations of this process.

  • Open Access

    A Roadmap for Twin-Fuselage Aircraft Conceptual Design

    by Álvaro Cobo-González, Cristina Cuerno-Rejado

    Unconventional aircraft configurations show significant potential to reduce aviation’s environmental footprint. Computerized conceptual design environments enable the design of unconventional aircraft concepts and the comparison of their performance and environmental impact against conventional Tube-And-Wing aircraft and other competing unconventional layouts. However, no environment has yet been specifically developed to support the Twin-Fuselage configuration. This paper addresses this gap by analyzing the advantages of the Twin-Fuselage configuration, identifying a potentially relevant design space, and compiling the existing conceptual-level design methods applicable to this layout. Building on these results, a roadmap for the conception of computerized conceptual design environments supporting Twin-Fuselage aircraft is presented. A structured environment architecture is proposed considering current trends and limitations of state-of-the-art environments supporting other unconventional configurations. The proposed modules for each discipline are also outlined. Finally, the main research gaps in Twin-Fuselage aircraft conceptual design are identified, highlighting and prioritizing the developments needed to enable a fully operational Twin-Fuselage-supporting computerized conceptual design environment.

  • Open Access

    Multi-Point Design of Optimal Propellers for Remotely Piloted Aircraft Systems

    by Alejandro Sanchez-Carmona, Kamil Sznajdrowicz-Rebisz, Alejandro Dominguez-Tuya, Carlos Balsalobre-Alvarez, Fernando Gandia-Aguera, Cristina Cuerno-Rejado

    This paper proposes a solution for the design of high-performance propellers optimized for various flight conditions. Considering both propulsion and electric motor efficiencies, a new design optimization methodology is proposed. The optimization of the electric propulsive system is directly achieved by simultaneously analyzing the aerodynamic performance of the propeller and the motor. This study is focused on small, low-speed Remotely Piloted Aircraft Systems, addressing the design of fixed pitch propellers that operate efficiently over the entire speed range. The aerodynamic methodology uses combined blade element and momentum theory, which is adequate for a preliminary design phase with low computational time. For the aerodynamic coefficients of the airfoils used in these applications, at low Reynolds numbers, a new database was developed that incorporates airfoil experimental data and analytical methods to cover a wide range of angles of attack, beyond stall. For the modelling of the motor behavior, an idealization of the circuit was carried out, which considers its basic electric parameters. The results show significant improvements with respect to the information available for a current commercial propeller.


  • Open Access

    Preliminary Design of a Tandem-Wing Unmanned Aerial System

    by Alejandro Sanchez-Carmona, Daniel del Río Velilla, Antonio Fernández López, Cristina Cuerno-Rejado

    The drone industry is continuously growing. The regulatory framework that allows these aircraft to operate safely is gradually evolving, enabling missions with growing associated risks, although it is not progressing at the same speed as the industry itself. To provide certainty to regulators, it is necessary to employ design methodologies that are recognized in the aerospace industry. Therefore, in this work, we addressed the design and manufacturing of a lightweight unconventional-configuration unmanned aircraft by adapting widely known conceptual design methodologies from manned aviation from authors such as Torenbeek and Roskam. Manufacturing was carried out by combining new techniques for the use of composite materials with additive manufacturing. A wide variability in the results was identified across the different models used. However, taking the most restrictive estimates into account, the results show that the structural weight estimates of the wing, made using classical manned aviation methods, align with the final weight obtained, assuming the wing can withstand the aerodynamic and inertial loads applied within a certain safety margin.


  • Open Access

    A Systematic Approach towards the Integration of Initial Airworthiness Regulatory Requirements in Remotely Piloted Aircraft System Conceptual Design Methodologies

    by Álvaro Gómez-Rodríguez, Cengiz Turkoglu, Cristina Cuerno-Rejado

    The regulatory framework of Remotely Piloted Aircraft Systems (RPASs) has recently experienced an extraordinary evolution. This article seeks to improve the integration of certification considerations in RPAS conceptual design approaches so as to enhance the safety, certifiability and competitiveness of their resulting designs. The first part of the research conducts a two-stage analysis of contemporary regulations related to an RPAS’s initial airworthiness. In the first stage, the broad international regulation paradigm is evaluated attending to a set of criteria that are tightly related to both airworthiness and design considerations. The second stage keeps the most promising documents from a design–integration standpoint, which are assessed according to their applicability considering both design and operational aspects. The results of this analysis provide insights regarding the main issues in airworthiness design criteria extraction and integration in design methodologies. To aid the designer in surmounting these challenges, a flexible procedure named DECEX is developed. Considering the documents and findings from the survey, and attending to the scope of the design methodology being developed, it aids in establishing a complete regulatory document corpus and in comparing and extracting the applicable airworthiness design criteria. Two case studies for different RPAS types are conducted to demonstrate its application.