Koray Ulgen
Koray Ulgen has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Arif Hepbasli
11 shared publications- Canan Kandilli
Usak University
4 shared publications A. Hepbasli
Department of Mechanical Engineering, Faculty of Engineering, Ege University, 35100 Bornova, Izmir, Turkey
3 shared publications- Erkan Kacan
Muğla Sıtkı Koçman University
3 shared publications - Mabvuto Mwanza
University of Zambia
3 shared publications - Ali Ağçal
Department of Electrical and Electronics Engineering Süleyman Demirel University Isparta Turkey
2 shared publications
Latest Publications
- 6 June 2025
- Published by Springer Nature
- p. 249-272
Development and Performance Analysis of a Solar-Powered Thermoelectric Air Conditioning System for Space Conditioning
- 6 June 2025
- Published by Springer Nature
- p. 249-272
Development and Performance Analysis of a Solar-Powered Thermoelectric Air Conditioning System for Space Conditioning
- Open Access
- 28 December 2023
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 12 (4) , 941-958
Design and Performance Analysis of an Air-Based Photovoltaic/Thermal Collector in Winter
The most basic needs of the buildings in which we spend almost all of our time are electricity and heat demands. Especially in cold climatic regions, it is very important that both electrical energy and heating energy demand are met through the same system. The use of photovoltaic (PV), is increasing rapidly. Photovoltaic panels can transform solar energy into electrical energy with less than 20% performance. Photovoltaic-thermal(PV/T) collectors which can be mounted on facades of buildings or used as building envelopes, are one of the solar energy applications. With this collector, both electric energy and thermal energy demand is produced from solar energy. In our work, Photovoltaic panel and some kind of solar air collector have been taken into consideration. In order to determine the behavior of the air-based photovoltaic-thermal collector, an experimental setup and a measurement system have been established. The experimental setup consists of this measurement system, sensors that obtain data, and a data storage unit that can transmit temperature, humidity, and radiation data to the computer at the desired frequency. In order to determine the performance of the air-based PV/T collector, the efficiencies of both the PV and the solar air collector were calculated separately. To determine the performance of this collector, calculation criteria’s and model has been determined. When creating this model, the problem has been considered as time-dependent under irregular conditions. The theoretical analysis model, which was established to determine the performance of the air-based PV/T collector, was evaluated according to the winter climatic conditions of Izmir-Turkey.
- 28 December 2023
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 12 (4) , 941-958
Open AccessDesign and Performance Analysis of an Air-Based Photovoltaic/Thermal Collector in Winter
The most basic needs of the buildings in which we spend almost all of our time are electricity and heat demands. Especially in cold climatic regions, it is very important that both electrical energy and heating energy demand are met through the same system. The use of photovoltaic (PV), is increasing rapidly. Photovoltaic panels can transform solar energy into electrical energy with less than 20% performance. Photovoltaic-thermal(PV/T) collectors which can be mounted on facades of buildings or used as building envelopes, are one of the solar energy applications. With this collector, both electric energy and thermal energy demand is produced from solar energy. In our work, Photovoltaic panel and some kind of solar air collector have been taken into consideration. In order to determine the behavior of the air-based photovoltaic-thermal collector, an experimental setup and a measurement system have been established. The experimental setup consists of this measurement system, sensors that obtain data, and a data storage unit that can transmit temperature, humidity, and radiation data to the computer at the desired frequency. In order to determine the performance of the air-based PV/T collector, the efficiencies of both the PV and the solar air collector were calculated separately. To determine the performance of this collector, calculation criteria’s and model has been determined. When creating this model, the problem has been considered as time-dependent under irregular conditions. The theoretical analysis model, which was established to determine the performance of the air-based PV/T collector, was evaluated according to the winter climatic conditions of Izmir-Turkey.
- Open Access
- 20 December 2023
- Published by Osmaniye Korkut Ata Universitesi in Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 6 (Ek Sayı) , 624-644
Examination of the Use of Solar Chimney as a Passive Solar Energy Ventilation Method in Buildings through Case Studies
Basit ve pratik bir pasif güneş enerjili havalandırma ve soğutma sistemi olarak güneş bacaları; işletme maliyetinin azlığı, enerji gereksiniminin sıfıra yakın oluşu ve karbondioksit emisyonuna olumlu katkısı nedeniyle hem ticari binalarda hem de konutlarda ısı yükünü azaltmak, doğal serinletme, havalandırma veya ısıtma sağlamak adına büyük ilgi görmektedir. Bu çalışmada pasif güneş enerjili sistemler ile ilgili kısa bir bilgi verildikten sonra pasif havalandırma ve mekân ısıtmasında kullanılan güneş bacalarının binalardaki kullanım yöntemlerine dair bilgiler verilmiş çalışma prensibi, katmanları ve sınıflandırılması detaylı olarak anlatılmıştır. Son olarak pasif havalandırma ve serinletme amacıyla güneş bacası kullanımları üzerine yapılmış örnekler incelenerek değerlendirilmiştir.
- 20 December 2023
- Published by Osmaniye Korkut Ata Universitesi in Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 6 (Ek Sayı) , 624-644
Open AccessExamination of the Use of Solar Chimney as a Passive Solar Energy Ventilation Method in Buildings through Case Studies
Basit ve pratik bir pasif güneş enerjili havalandırma ve soğutma sistemi olarak güneş bacaları; işletme maliyetinin azlığı, enerji gereksiniminin sıfıra yakın oluşu ve karbondioksit emisyonuna olumlu katkısı nedeniyle hem ticari binalarda hem de konutlarda ısı yükünü azaltmak, doğal serinletme, havalandırma veya ısıtma sağlamak adına büyük ilgi görmektedir. Bu çalışmada pasif güneş enerjili sistemler ile ilgili kısa bir bilgi verildikten sonra pasif havalandırma ve mekân ısıtmasında kullanılan güneş bacalarının binalardaki kullanım yöntemlerine dair bilgiler verilmiş çalışma prensibi, katmanları ve sınıflandırılması detaylı olarak anlatılmıştır. Son olarak pasif havalandırma ve serinletme amacıyla güneş bacası kullanımları üzerine yapılmış örnekler incelenerek değerlendirilmiştir.
- 4 July 2023
- Published by Springer Nature
- p. 451-462
A System Dynamics Analysis of Impact of Feed in Tariff Policy on Renewable Energies in Zambia
- 4 July 2023
- Published by Springer Nature
- p. 451-462
A System Dynamics Analysis of Impact of Feed in Tariff Policy on Renewable Energies in Zambia
- 4 July 2023
- Published by Springer Nature
- p. 419-430
How a Good Lightning Protection Program Contributes to Energy Management and Sustainability
- 4 July 2023
- Published by Springer Nature
- p. 419-430
How a Good Lightning Protection Program Contributes to Energy Management and Sustainability
- Open Access
- 27 March 2023
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 11 (1) , 113-125
PERFORMANCE IMPROVEMENT IN A 1 MW GRID-CONNECTED PV POWER PLANT INSTALLED IN YATAĞAN-MUĞLA TURKEY VIA STATCOM ON MATLAB-Simulink PORTAL
A grid-connected power system's performance depends on the produced energy's power quality and power coefficient. The higher the power quality of the energy transferred to the grid, the more critical it is for power plants, energy distribution systems and end-users. This study investigated the optimisation possibilities obtained by applying STATCOM (Static VAR Compensation) for a 1 MW PV-based Solar Power Plant (PV-SPP) in the Muğla-Türkiye province. First, the data of components such as the inverter and PV panel that make up the plant were obtained, and the raw MATLAB-Simulink modelling of the plant was carried out. System performance outputs were obtained by adding STATCOM modelling to the obtained modelling. The scientific results of the optimisation would be obtained if this technique was applied to the existing power plant. Since STATCOM also performs the RPC (Reactive Power Compensation) process, it is an up-to-date and effective technique that improves system energy power quality. According to the simulation results, this system with STATCOM draws 24,043% and 11,671% less reactive power and current than the non-STATCOM system.
- 27 March 2023
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 11 (1) , 113-125
Open AccessPERFORMANCE IMPROVEMENT IN A 1 MW GRID-CONNECTED PV POWER PLANT INSTALLED IN YATAĞAN-MUĞLA TURKEY VIA STATCOM ON MATLAB-Simulink PORTAL
A grid-connected power system's performance depends on the produced energy's power quality and power coefficient. The higher the power quality of the energy transferred to the grid, the more critical it is for power plants, energy distribution systems and end-users. This study investigated the optimisation possibilities obtained by applying STATCOM (Static VAR Compensation) for a 1 MW PV-based Solar Power Plant (PV-SPP) in the Muğla-Türkiye province. First, the data of components such as the inverter and PV panel that make up the plant were obtained, and the raw MATLAB-Simulink modelling of the plant was carried out. System performance outputs were obtained by adding STATCOM modelling to the obtained modelling. The scientific results of the optimisation would be obtained if this technique was applied to the existing power plant. Since STATCOM also performs the RPC (Reactive Power Compensation) process, it is an up-to-date and effective technique that improves system energy power quality. According to the simulation results, this system with STATCOM draws 24,043% and 11,671% less reactive power and current than the non-STATCOM system.
- Open Access
- 25 March 2023
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 11 (1) , 55-67
The Parametric Design of a Photovoltaic Power System over a Parking Lot
The effective planning of urban areas is important in terms of improving both the urban density and the traffic problem. Parking lots should be arranged to manage spaces and traffic at the points where the population is highly dense. On the other hand, installing rooftop solar energy plants over parking lots are highly advantageous in terms of renewable energy production. During the design process of such urban power plants, the area-energy optimization and the shading caused by surrounding buildings have direct effect on overall performance. In this study, firstly a parking lot was designed on an empty parcel within the urban area of İzmir province, with the capacity of 1.704 vehicles, 64 motorcycles and 64 electric vehicle charging stations. In addition, a solar power plant was planned over the parking lot canopies, then a power system was designed by selecting the proper photovoltaic panels and inverters. On the parametric simulation software, which was used to determine the system performance, the solar radiation and shadow simulations on the designed parking lot were run. After that, the electricity generation performances were investigated and comparisons between the parking lot parcels and the selected dates were made. In the conclusion, it was found that 7.006 photovoltaic panels placed over the canopies with an area of 24.995 m2 are able to generate 8.084 MWh/year electricity.
- 25 March 2023
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 11 (1) , 55-67
Open AccessThe Parametric Design of a Photovoltaic Power System over a Parking Lot
The effective planning of urban areas is important in terms of improving both the urban density and the traffic problem. Parking lots should be arranged to manage spaces and traffic at the points where the population is highly dense. On the other hand, installing rooftop solar energy plants over parking lots are highly advantageous in terms of renewable energy production. During the design process of such urban power plants, the area-energy optimization and the shading caused by surrounding buildings have direct effect on overall performance. In this study, firstly a parking lot was designed on an empty parcel within the urban area of İzmir province, with the capacity of 1.704 vehicles, 64 motorcycles and 64 electric vehicle charging stations. In addition, a solar power plant was planned over the parking lot canopies, then a power system was designed by selecting the proper photovoltaic panels and inverters. On the parametric simulation software, which was used to determine the system performance, the solar radiation and shadow simulations on the designed parking lot were run. After that, the electricity generation performances were investigated and comparisons between the parking lot parcels and the selected dates were made. In the conclusion, it was found that 7.006 photovoltaic panels placed over the canopies with an area of 24.995 m2 are able to generate 8.084 MWh/year electricity.
- 22 September 2021
- Published by Makina Muhendisleri Odasi (Chamber of Mechanical Engineering) in Mühendis ve Makina
- Vol. 62 (704) , 534-555
Energy Performance Evaluation of University Buildings: MCBU Köprübaşı Vocational School Example
Enerjide dışa bağımlılığın giderek arttığı ülkemizde en yoğun tüketim bina sektöründe olmaktadır. Bu sebeple binalarda enerji verimliliğini artıracak çözümlerin bir an önce uygulamaya geçmesi gerekmektedir. Bu amaç doğrultusunda oluşturulan bu çalışma kapsamında, Manisa Celal Bayar Üniversitesi bünyesinde hizmet veren Köprübaşı Meslek Yüksekokul binası irdelenerek enerji tasarruf performansı araştırılmıştır. Binanın mevcut durumunun davranışını belirlemek amacıyla yıl boyunca ölçümler yapılarak enerji kullanım düzeyi belirlenmiştir. Daha sonra önerilen iyileştirmeler sonucunda nasıl bir enerji tasarrufu sağlayacağını belirlemek amacıyla, bilgisayar tabanlı enerji modellemesi yapılmıştır. Simülasyon sonucunda elde edilen verilerden yola çıkarak, binanın enerji tasarruf potansiyeli ve iyileştirme sonucunda nasıl bir davranış göstereceği hesaplanmıştır. Hem ölçüm verilerinden hem de modellemeden elde edilen veriler doğrultusunda, mevcut bina yıllık bazda, 90,40 kWh/m2yıl enerji tüketirken, önerilen iyileştirmeler sonucunda 55,54 kWh/m2yıl enerji tüketir hale gelmiştir. Yani, yaklaşık %40 oranında enerji tasarrufu sağlama potansiyeli olduğu belirlenmiştir. Binanın mevcut durumdaki kullanım düzeyine göre sera gazı emisyonu 74,90 kgCO2/m²yıl değerinde iken, önerilen iyileştirmeler ve bina çatısında hâlihazırda mevcut olan FV-GES’in desteğiyle bu değer 12,61 kgCO2/m²yıl değerine kadar düşeceği hesaplanmıştır.
- 22 September 2021
- Published by Makina Muhendisleri Odasi (Chamber of Mechanical Engineering) in Mühendis ve Makina
- Vol. 62 (704) , 534-555
Energy Performance Evaluation of University Buildings: MCBU Köprübaşı Vocational School Example
Enerjide dışa bağımlılığın giderek arttığı ülkemizde en yoğun tüketim bina sektöründe olmaktadır. Bu sebeple binalarda enerji verimliliğini artıracak çözümlerin bir an önce uygulamaya geçmesi gerekmektedir. Bu amaç doğrultusunda oluşturulan bu çalışma kapsamında, Manisa Celal Bayar Üniversitesi bünyesinde hizmet veren Köprübaşı Meslek Yüksekokul binası irdelenerek enerji tasarruf performansı araştırılmıştır. Binanın mevcut durumunun davranışını belirlemek amacıyla yıl boyunca ölçümler yapılarak enerji kullanım düzeyi belirlenmiştir. Daha sonra önerilen iyileştirmeler sonucunda nasıl bir enerji tasarrufu sağlayacağını belirlemek amacıyla, bilgisayar tabanlı enerji modellemesi yapılmıştır. Simülasyon sonucunda elde edilen verilerden yola çıkarak, binanın enerji tasarruf potansiyeli ve iyileştirme sonucunda nasıl bir davranış göstereceği hesaplanmıştır. Hem ölçüm verilerinden hem de modellemeden elde edilen veriler doğrultusunda, mevcut bina yıllık bazda, 90,40 kWh/m2yıl enerji tüketirken, önerilen iyileştirmeler sonucunda 55,54 kWh/m2yıl enerji tüketir hale gelmiştir. Yani, yaklaşık %40 oranında enerji tasarrufu sağlama potansiyeli olduğu belirlenmiştir. Binanın mevcut durumdaki kullanım düzeyine göre sera gazı emisyonu 74,90 kgCO2/m²yıl değerinde iken, önerilen iyileştirmeler ve bina çatısında hâlihazırda mevcut olan FV-GES’in desteğiyle bu değer 12,61 kgCO2/m²yıl değerine kadar düşeceği hesaplanmıştır.
- Open Access
- 29 June 2021
- Published by Mugla Sitki Kocman University in Mugla Journal of Science and Technology
- Vol. 7 (1) , 25-35
REACTIVE POWER COMPENSATION BASED OPTIMIZATION OF MICRO-SCALE STAND-ALONE PHOTOVOLTAIC SYSTEMS
Inductive loads demand reactive power that does not turn into useful energy from the energy source, adversely affects system components, and releases excessive thermal energy. The control of the power factor (cos φ) decreases the negative effect of reactive power in the system by performing reactive power compensation (RPC). In this study, RPC is applied to a Photovoltaic (PV) system to increase the overall system. The designed system's main components' mathematical modeling and performance simulations are made using MATLAB codes and Simulink modellings. Simulation-based performance data were compared with the data obtained from the experimental setup. As a result of the study, the system's current-carrying capacity (CCC) is increased, a reduction in thermal energy is obtained; therefore, the system performance is optimized.
- 29 June 2021
- Published by Mugla Sitki Kocman University in Mugla Journal of Science and Technology
- Vol. 7 (1) , 25-35
Open AccessREACTIVE POWER COMPENSATION BASED OPTIMIZATION OF MICRO-SCALE STAND-ALONE PHOTOVOLTAIC SYSTEMS
Inductive loads demand reactive power that does not turn into useful energy from the energy source, adversely affects system components, and releases excessive thermal energy. The control of the power factor (cos φ) decreases the negative effect of reactive power in the system by performing reactive power compensation (RPC). In this study, RPC is applied to a Photovoltaic (PV) system to increase the overall system. The designed system's main components' mathematical modeling and performance simulations are made using MATLAB codes and Simulink modellings. Simulation-based performance data were compared with the data obtained from the experimental setup. As a result of the study, the system's current-carrying capacity (CCC) is increased, a reduction in thermal energy is obtained; therefore, the system performance is optimized.