Jitao Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jitao Chen has a total of 188 co-authors. Here are the top co-authors by number of shared publications:
Xusheng Wang
Chinese Acad Sci, Tech Inst Phys & Chem, Beijing 100190, Peoples R China
16 shared publications- Mianqi Xue
Technical Institute of Physics and Chemistry Chinese Academy of Sciences Beijing China
15 shared publications - Chao Wang
School of Materials Science and Engineering Tongji University Shanghai China
12 shared publications Shizhi Huang
8 shared publications- Yunhui Huang
State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, 430074, China
7 shared publications Chengyuan Peng
6 shared publications
Latest Publications
- 13 November 2026
- Published by Elsevier in Nano Energy
Synergistic Electronic Push–Pull Modulation Enables Reversible Mn/O Redox in P2-Type Cathodes
- 13 November 2026
- Published by Elsevier in Nano Energy
Synergistic Electronic Push–Pull Modulation Enables Reversible Mn/O Redox in P2-Type Cathodes
- Open Access
- 18 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 8577
Author Correction: Flash upcycling of spent LiCoO2 into oxygen-suppressed lithium-replenishing agent for high-performance batteries
- 18 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 8577
Open AccessAuthor Correction: Flash upcycling of spent LiCoO2 into oxygen-suppressed lithium-replenishing agent for high-performance batteries
- Top Cited Papers
- 13 May 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (11) , 3564-3574
A synergistic dual additive strategy for constructing gradient hydrophobic interfaces toward ultrastable aqueous zinc metal anodes
A dual additive strategy decouples the functions of interfacial hydrophobicity and solvation coordination, enabling the in situ construction of an advanced multifunctional gradient hydrophobic interface that provides excellent cycling performance.
- 13 May 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (11) , 3564-3574
Top Cited PapersA synergistic dual additive strategy for constructing gradient hydrophobic interfaces toward ultrastable aqueous zinc metal anodes
A dual additive strategy decouples the functions of interfacial hydrophobicity and solvation coordination, enabling the in situ construction of an advanced multifunctional gradient hydrophobic interface that provides excellent cycling performance.
- 23 January 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (4) , 1374-1384
Solvation geometry engineering for stable high-voltage potassium-ion batteries
To advance the practical application of potassium-ion batteries (PIBs), the lack of robust electrolytes must be addressed, as the prevailing fluorinated solvents present a cost-prohibitive and environmentally unsustainable solution. Here, we propose an asymmetric alkylation strategy to overcome this limitation, engineering a fluorine-free, high-flash-point, and green ether-based electrolyte. This design reconstitutes the solvent coordination geometry through dual steric hindrance, which concurrently weakens cation-solvent binding and modulates the electronic structure of the solvation cluster. Consequently, the designed electrolyte demonstrates exceptional interfacial compatibility, enabling the high-voltage K2Mn[Fe(CN)6]||graphite and K2Mn[Fe(CN)6]||hard carbon full-cells to achieve capacity retention rates of 75.75% after 1400 cycles at 0.33 C and 80.09% after 1500 cycles at 0.5 C, respectively. Moreover, this stability is preserved under elevated temperatures, with both full-cells exhibiting stable operation over hundreds of cycles. This work establishes an effective electrolyte design strategy for realizing high-performance, cost-effective, and environmentally friendly PIBs.
- 23 January 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (4) , 1374-1384
Solvation geometry engineering for stable high-voltage potassium-ion batteries
To advance the practical application of potassium-ion batteries (PIBs), the lack of robust electrolytes must be addressed, as the prevailing fluorinated solvents present a cost-prohibitive and environmentally unsustainable solution. Here, we propose an asymmetric alkylation strategy to overcome this limitation, engineering a fluorine-free, high-flash-point, and green ether-based electrolyte. This design reconstitutes the solvent coordination geometry through dual steric hindrance, which concurrently weakens cation-solvent binding and modulates the electronic structure of the solvation cluster. Consequently, the designed electrolyte demonstrates exceptional interfacial compatibility, enabling the high-voltage K2Mn[Fe(CN)6]||graphite and K2Mn[Fe(CN)6]||hard carbon full-cells to achieve capacity retention rates of 75.75% after 1400 cycles at 0.33 C and 80.09% after 1500 cycles at 0.5 C, respectively. Moreover, this stability is preserved under elevated temperatures, with both full-cells exhibiting stable operation over hundreds of cycles. This work establishes an effective electrolyte design strategy for realizing high-performance, cost-effective, and environmentally friendly PIBs.
- Open Access
- 5 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 41
Flash upcycling of spent LiCoO2 into oxygen-suppressed lithium-replenishing agent for high-performance batteries
Battery recycling is essential to mitigate resource depletion and improve environmental sustainability. However, conventional metallurgical and direct regeneration methods involve trade-offs among energy input, environmental impact, and feedstock adaptability. Here we report a universal upcycling method that converts spent LiCoO2 into Li6CoO4 within 10 seconds via flash Joule heating, achieving complete lithium and cobalt recovery regardless of degradation state. The resulting Li6CoO4 serves as a high-capacity sacrificial additive to offset active lithium loss. To overcome its inherent air sensitivity and oxygen release during delithiation, a conformal sulfur coating was applied to stabilize surface chemistry and redirect oxygen evolution into sulfate formation. This sulfur-mediated mechanism effectively suppresses gas generation and parasitic side reactions, enabling non-destructive lithium replenishment. When integrated into graphite | |LiFePO4 pouch cells, the stabilized Li6CoO4 achieves 91.4% capacity retention over 1400 cycles at a current density of 80 mA g−1. Comparative life-cycle and techno-economic analyses reveal clear reductions in energy consumption and CO2 emissions, along with improved economic returns. This work provides a scalable route that bridges positive electrode waste recovery with high-performance lithium supply, advancing closed-loop battery systems for sustainable energy storage.
- 5 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 41
Open AccessFlash upcycling of spent LiCoO2 into oxygen-suppressed lithium-replenishing agent for high-performance batteries
Battery recycling is essential to mitigate resource depletion and improve environmental sustainability. However, conventional metallurgical and direct regeneration methods involve trade-offs among energy input, environmental impact, and feedstock adaptability. Here we report a universal upcycling method that converts spent LiCoO2 into Li6CoO4 within 10 seconds via flash Joule heating, achieving complete lithium and cobalt recovery regardless of degradation state. The resulting Li6CoO4 serves as a high-capacity sacrificial additive to offset active lithium loss. To overcome its inherent air sensitivity and oxygen release during delithiation, a conformal sulfur coating was applied to stabilize surface chemistry and redirect oxygen evolution into sulfate formation. This sulfur-mediated mechanism effectively suppresses gas generation and parasitic side reactions, enabling non-destructive lithium replenishment. When integrated into graphite | |LiFePO4 pouch cells, the stabilized Li6CoO4 achieves 91.4% capacity retention over 1400 cycles at a current density of 80 mA g−1. Comparative life-cycle and techno-economic analyses reveal clear reductions in energy consumption and CO2 emissions, along with improved economic returns. This work provides a scalable route that bridges positive electrode waste recovery with high-performance lithium supply, advancing closed-loop battery systems for sustainable energy storage.
- 14 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (46) , 40023-40033
Manganese Segregation in Layered Oxide Cathode by Deep Eutectic Solvent Synthesis toward High-Voltage Sodium Storage
O3-type layered oxides are promising cathodes for sodium-ion batteries with high specific capacity. Nevertheless, irreversible structure degradation and oxygen redox at high voltages impede further application toward high energy density. Here, a deep eutectic solvent (DES)-assisted synthesis strategy is developed to stabilize the layered structure by segregation of Mn sites in O3-NaNi1/3Fe1/3Mn1/3O2 (NFM). The DES system affords a stronger hydrogen bonding interaction, leading to a quasi-homogeneous mixing of Ni/Mn/Fe ions. Mn segregation is induced in the transition metal layer of NFM, which facilitates a gradual phase transition via O3 + P3 two-phase coexistence, rather than a sudden O3 → P3 transition with significant variation of interlayer spacing. It also promotes reversible anion redox of oxygen and reduced surface residual alkali, which confers superior cycling stability and rate performance on the DES-synthesized NFM compared to traditional sol-gel-synthesized NFM. The material achieves an initial Coulombic efficiency of 96% at 0.1 C and notable rate performance for a capacity of 115 mAh g-1 at 10 C. Additionally, it yields a superior cyclability (80% capacity retention after 150 cycles at 0.5 C) in full cell pairing with hard carbon, validating its practical potential. This work offers a promising approach for the rational design of cathode materials with high capacity and superior stability.
- 14 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (46) , 40023-40033
Manganese Segregation in Layered Oxide Cathode by Deep Eutectic Solvent Synthesis toward High-Voltage Sodium Storage
O3-type layered oxides are promising cathodes for sodium-ion batteries with high specific capacity. Nevertheless, irreversible structure degradation and oxygen redox at high voltages impede further application toward high energy density. Here, a deep eutectic solvent (DES)-assisted synthesis strategy is developed to stabilize the layered structure by segregation of Mn sites in O3-NaNi1/3Fe1/3Mn1/3O2 (NFM). The DES system affords a stronger hydrogen bonding interaction, leading to a quasi-homogeneous mixing of Ni/Mn/Fe ions. Mn segregation is induced in the transition metal layer of NFM, which facilitates a gradual phase transition via O3 + P3 two-phase coexistence, rather than a sudden O3 → P3 transition with significant variation of interlayer spacing. It also promotes reversible anion redox of oxygen and reduced surface residual alkali, which confers superior cycling stability and rate performance on the DES-synthesized NFM compared to traditional sol-gel-synthesized NFM. The material achieves an initial Coulombic efficiency of 96% at 0.1 C and notable rate performance for a capacity of 115 mAh g-1 at 10 C. Additionally, it yields a superior cyclability (80% capacity retention after 150 cycles at 0.5 C) in full cell pairing with hard carbon, validating its practical potential. This work offers a promising approach for the rational design of cathode materials with high capacity and superior stability.
Role of Crystal Water in Prussian Blue Analogs: Calcium Ions Stabilizers Enable High‐Performance Sodium‐Ion Batteries
Prussian blue analogs (PBAs) have emerged as highly promising cathode materials for large‐scale applications of sodium‐ion batteries. PBAs usually contain the crystal water, which is thought to cause a series of negative effects and shall be removed as much as possible. However, the role of crystal water on the structure and the mechanism of its evolution remains poorly understood. In this study, the electrochemical in situ doping of PBAs during battery cycling is achieved by adding Ca 2+ stabilizers into the electrolyte. These findings reveal that crystal water molecules crucially compensate for [Fe(CN) 6 ] 4− vacancies, serving as structural pillars that maintain lattice integrity. The optimized PBAs cathode demonstrates a discharge specific capacity of 121.0 mAh g −1 at 0.2 C with a capacity retention of 91.38% after 500 cycles at 1 C, and even 98.27% after 2000 cycles at a high current density of 10 C, which provides new insights into the design of high‐performance PBAs cathode materials.
Role of Crystal Water in Prussian Blue Analogs: Calcium Ions Stabilizers Enable High‐Performance Sodium‐Ion Batteries
Prussian blue analogs (PBAs) have emerged as highly promising cathode materials for large‐scale applications of sodium‐ion batteries. PBAs usually contain the crystal water, which is thought to cause a series of negative effects and shall be removed as much as possible. However, the role of crystal water on the structure and the mechanism of its evolution remains poorly understood. In this study, the electrochemical in situ doping of PBAs during battery cycling is achieved by adding Ca 2+ stabilizers into the electrolyte. These findings reveal that crystal water molecules crucially compensate for [Fe(CN) 6 ] 4− vacancies, serving as structural pillars that maintain lattice integrity. The optimized PBAs cathode demonstrates a discharge specific capacity of 121.0 mAh g −1 at 0.2 C with a capacity retention of 91.38% after 500 cycles at 1 C, and even 98.27% after 2000 cycles at a high current density of 10 C, which provides new insights into the design of high‐performance PBAs cathode materials.
- 5 May 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 515
A novel electrochemically-induced layered MnO2 cathode for high-rate and long-life aqueous zinc-ion battery
- 5 May 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 515
A novel electrochemically-induced layered MnO2 cathode for high-rate and long-life aqueous zinc-ion battery
- 23 July 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (35) , 23485-23494
An amphiphilic interface for constructing a uniform composite solid-state electrolyte towards long-life all-solid-state sodium metal batteries
Sodium composite solid-state electrolytes, composed of polymer matrices and oxide electrolyte fillers, have garnered considerable attention, due to a balance of ionic conductivity, flexibility, mechanical stability and electrochemical stability. However, the huge disparity in surface energy between inorganic and organic components induces a severe aggregation of the oxide filler within the polymer matrix. In this research, an amphiphilic polydopamine (PDA) compatibility layer was strategically applied to Na3Zr2Si2PO12 (NZSP) to mitigate the wettability differential between NZSP and poly(ethylene oxide) (PEO), which effectively mitigates the aggregation of NZSP within PEO, meliorates the dispersion of inorganic fillers, and constructs a uniform composite solid-state electrolyte membrane PCSE. Consequently, a composite electrolyte based on PDA@NZSP manifested enhanced electrochemical performance and cycling stability. The all-solid-state battery, assembled with PCSE, exhibited 1350 stable cycles at 60 °C with a low polarization overpotential and a high capacity retention (80.5%). Finite element simulation indicated a homogeneous Na+ flux density distribution at the electrode–electrolyte interface under an applied electric field, elucidating the pivotal role of the PDA amphiphilic interface in the construction of uniform composite solid-state electrolytes. This work provides a feasible solution for the construction of long-life all-solid-state sodium metal batteries.
- 23 July 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (35) , 23485-23494
An amphiphilic interface for constructing a uniform composite solid-state electrolyte towards long-life all-solid-state sodium metal batteries
Sodium composite solid-state electrolytes, composed of polymer matrices and oxide electrolyte fillers, have garnered considerable attention, due to a balance of ionic conductivity, flexibility, mechanical stability and electrochemical stability. However, the huge disparity in surface energy between inorganic and organic components induces a severe aggregation of the oxide filler within the polymer matrix. In this research, an amphiphilic polydopamine (PDA) compatibility layer was strategically applied to Na3Zr2Si2PO12 (NZSP) to mitigate the wettability differential between NZSP and poly(ethylene oxide) (PEO), which effectively mitigates the aggregation of NZSP within PEO, meliorates the dispersion of inorganic fillers, and constructs a uniform composite solid-state electrolyte membrane PCSE. Consequently, a composite electrolyte based on PDA@NZSP manifested enhanced electrochemical performance and cycling stability. The all-solid-state battery, assembled with PCSE, exhibited 1350 stable cycles at 60 °C with a low polarization overpotential and a high capacity retention (80.5%). Finite element simulation indicated a homogeneous Na+ flux density distribution at the electrode–electrolyte interface under an applied electric field, elucidating the pivotal role of the PDA amphiphilic interface in the construction of uniform composite solid-state electrolytes. This work provides a feasible solution for the construction of long-life all-solid-state sodium metal batteries.
- 20 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (15) , 6187-6197
Enabling Structural and Interfacial Stability via Coherent Interface Li3BO3 Coating for Lithium-Rich Manganese-Based Cathodes
- 20 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (15) , 6187-6197
Enabling Structural and Interfacial Stability via Coherent Interface Li3BO3 Coating for Lithium-Rich Manganese-Based Cathodes