Ernst Willingshofer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ernst Willingshofer has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Dimitrios Sokoutis
Department of Earth Sciences Utrecht University Utrecht The Netherlands
3 shared publications Dimitrios Sokoutis
Faculty of Geosciences Utrecht University Utrecht Netherlands
2 shared publications- Georgios-Pavlos Farangitakis
Department of Earth Sciences Durham University Durham United Kingdom
2 shared publications - Jeroen van Hunen
Durham University
2 shared publications - Kenneth J. W. McCaffrey
Department of Earth Sciences Durham University Durham UK
2 shared publications - Lara M. Kalnins
Department of Earth Sciences Durham University Durham UK
2 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Force changes in response to fault growth and out-of-sequence thrusting in brittle compressional analogue models
Much of our current understanding of fold-and-thrust belt (FTB) structure and evolution is based on the critical taper theory. Even though this concept successfully explains the first-order relationship between FTB dynamics and shape via certain physical parameters, it does not account for transient force changes associated with the FTB's internal dynamics, including lateral fault growth or out-of-sequence thrusting. We implement a novel measurement technique to analogue modelling that uses an array of five force sensors aligned at the backstop to characterize the evolution of force. Combined with optical data that monitors surface deformation, this approach provides a methodological framework for capturing second-order force variations associated with non-coaxial deformation within FTBs.This novel approach enables the prediction of lateral thrust fault growth prior to surface emergence and of out-of-sequence reactivation of earlier-formed thrusts, thereby informing FTB evolution. We examine these relationships by assessing force responses to thrust propagation across pre-existing basement steps, with the ramp angle as the main variable. Our results indicate that a 90° ramp angle generates a pronounced second-order force component, which correlates with enhanced lateral fault variability and associated out-of-sequence thrusting driven by back-thrust activation. A similar structural and force response is observed for a 25° ramp angle, whereas 60° ramp angles produce negligible force disturbances and almost no out-of-sequence thrusting. These results demonstrate the sensitivity of FTB dynamics to structural inheritance.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessForce changes in response to fault growth and out-of-sequence thrusting in brittle compressional analogue models
Much of our current understanding of fold-and-thrust belt (FTB) structure and evolution is based on the critical taper theory. Even though this concept successfully explains the first-order relationship between FTB dynamics and shape via certain physical parameters, it does not account for transient force changes associated with the FTB's internal dynamics, including lateral fault growth or out-of-sequence thrusting. We implement a novel measurement technique to analogue modelling that uses an array of five force sensors aligned at the backstop to characterize the evolution of force. Combined with optical data that monitors surface deformation, this approach provides a methodological framework for capturing second-order force variations associated with non-coaxial deformation within FTBs.This novel approach enables the prediction of lateral thrust fault growth prior to surface emergence and of out-of-sequence reactivation of earlier-formed thrusts, thereby informing FTB evolution. We examine these relationships by assessing force responses to thrust propagation across pre-existing basement steps, with the ramp angle as the main variable. Our results indicate that a 90° ramp angle generates a pronounced second-order force component, which correlates with enhanced lateral fault variability and associated out-of-sequence thrusting driven by back-thrust activation. A similar structural and force response is observed for a 25° ramp angle, whereas 60° ramp angles produce negligible force disturbances and almost no out-of-sequence thrusting. These results demonstrate the sensitivity of FTB dynamics to structural inheritance.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Influence of lateral variations of décollement strength on the structure of orogenic wedges: insights from experimental viscous wedge models
Fold-and-thrust belts (FTBs) evolve over a mechanically weak basal décollement that separates overlying intensely deformed rocks from the underlying less deformed or undeformed rocks. Although fold-and-thrust belts are often considered laterally cylindrical in nature, a closer inspection reveals remarkable variations in structural style (e.g., fold geometry) both along and across the strike of mountain belts. Using crustal scale thin-sheet laboratory experiments, this study focuses on the role of laterally varying coupling strength of the basal décollement on the evolution of structural styles in natural FTBs. In this study, we used a rectangular slab of silicon putty, a linear viscous material, of uniform thickness in all experiments to simulate the crustal section and the models were deformed at a uniform convergence velocity of ~7.649 × 10-5 ms-1. Analyses of experimental results show remarkable changes in the wedge growth with the introduction of along strike variations in décollement strength. The segment of the deforming wedge over weakly coupled décollement propagates at a faster rate towards the frontal direction compared to the laterally continuous segment over a strongly coupled décollement, leading to an overall sinuous geometry of the deformation front. In contrast, an approximately linear deformation front represents a condition of uniform along-strike coupling strength at the basal décollement. Based on our experimental results, we argue that the broad arcuation of the mountain front along the eastern margin of the Zagros fold-thrust belt (i.e., Fars arc region) might have resulted due to along strike variations in the décollement strength, while the occurrence of a linear deformation front from the central to western margin of the fold-and-thrust belt represents a segment of the wedge with a uniform coupling strength at the basal décollement. Our experimental results can be carefully used to explain the cause of strike-wise segmentation of tectonic processes in orogenic belts, variations in topography and earthquake activities.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessInfluence of lateral variations of décollement strength on the structure of orogenic wedges: insights from experimental viscous wedge models
Fold-and-thrust belts (FTBs) evolve over a mechanically weak basal décollement that separates overlying intensely deformed rocks from the underlying less deformed or undeformed rocks. Although fold-and-thrust belts are often considered laterally cylindrical in nature, a closer inspection reveals remarkable variations in structural style (e.g., fold geometry) both along and across the strike of mountain belts. Using crustal scale thin-sheet laboratory experiments, this study focuses on the role of laterally varying coupling strength of the basal décollement on the evolution of structural styles in natural FTBs. In this study, we used a rectangular slab of silicon putty, a linear viscous material, of uniform thickness in all experiments to simulate the crustal section and the models were deformed at a uniform convergence velocity of ~7.649 × 10-5 ms-1. Analyses of experimental results show remarkable changes in the wedge growth with the introduction of along strike variations in décollement strength. The segment of the deforming wedge over weakly coupled décollement propagates at a faster rate towards the frontal direction compared to the laterally continuous segment over a strongly coupled décollement, leading to an overall sinuous geometry of the deformation front. In contrast, an approximately linear deformation front represents a condition of uniform along-strike coupling strength at the basal décollement. Based on our experimental results, we argue that the broad arcuation of the mountain front along the eastern margin of the Zagros fold-thrust belt (i.e., Fars arc region) might have resulted due to along strike variations in the décollement strength, while the occurrence of a linear deformation front from the central to western margin of the fold-and-thrust belt represents a segment of the wedge with a uniform coupling strength at the basal décollement. Our experimental results can be carefully used to explain the cause of strike-wise segmentation of tectonic processes in orogenic belts, variations in topography and earthquake activities.
- Open Access
- 27 March 2022
- Published by Copernicus GmbH
Plume-induced sinking of the intracontinental lithosphereas a fundamentally new mechanism of subduction initiation.
Although many different mechanisms for subduction initiation have been proposed, few of them are viable in terms of agreement with observations and reproducibility in numerical experiments. In particular, it has recently been demonstrated that intra-oceanic subduction triggered by an upwelling mantle plume could contribute greatly to the onset and functioning of plate tectonics in the early Earth and, to a lesser extent, in the modern Earth. In contrast, the onset of intracontinental subduction is still underestimated. Here we review 1) observations demonstrating the upwelling of hot mantle material flanked by sinking proto-slabs of the continental mantle lithosphere, and 2) previously published and new numerical models of plume-induced subduction initiation. Numerical modelling shows that under the condition of a sufficiently thick (> 100 km) continental plate, incipient down thrusting at the level of the lowermost lithospheric mantle can be triggered by plume anomalies with moderate temperatures and without significant strain and/or melt-induced weakening of the overlying rocks. This finding is in contrast to the requirements for plume-induced subduction initiation in oceanic or thin continental lithosphere. Consequently, plume-lithosphere interactions in the continental interior of Paleozoic-Proterozoic (Archean) platforms are the least demanding (and therefore potentially very common) mechanism for triggering subduction-like foundering in Phanerozoic Earth. Our findings are supported by a growing body of new geophysical data collected in a variety of intracontinental settings. A better understanding of the role of intracontinental mantle downthrusting and foundering in global plate tectonics and, in particular, in triggering "classic" oceanic-continental subduction will benefit from further detailed follow-up studies.
- 27 March 2022
- Published by Copernicus GmbH
Open AccessPlume-induced sinking of the intracontinental lithosphereas a fundamentally new mechanism of subduction initiation.
Although many different mechanisms for subduction initiation have been proposed, few of them are viable in terms of agreement with observations and reproducibility in numerical experiments. In particular, it has recently been demonstrated that intra-oceanic subduction triggered by an upwelling mantle plume could contribute greatly to the onset and functioning of plate tectonics in the early Earth and, to a lesser extent, in the modern Earth. In contrast, the onset of intracontinental subduction is still underestimated. Here we review 1) observations demonstrating the upwelling of hot mantle material flanked by sinking proto-slabs of the continental mantle lithosphere, and 2) previously published and new numerical models of plume-induced subduction initiation. Numerical modelling shows that under the condition of a sufficiently thick (> 100 km) continental plate, incipient down thrusting at the level of the lowermost lithospheric mantle can be triggered by plume anomalies with moderate temperatures and without significant strain and/or melt-induced weakening of the overlying rocks. This finding is in contrast to the requirements for plume-induced subduction initiation in oceanic or thin continental lithosphere. Consequently, plume-lithosphere interactions in the continental interior of Paleozoic-Proterozoic (Archean) platforms are the least demanding (and therefore potentially very common) mechanism for triggering subduction-like foundering in Phanerozoic Earth. Our findings are supported by a growing body of new geophysical data collected in a variety of intracontinental settings. A better understanding of the role of intracontinental mantle downthrusting and foundering in global plate tectonics and, in particular, in triggering "classic" oceanic-continental subduction will benefit from further detailed follow-up studies.
- Open Access
- 7 December 2020
- Published by Wiley in Basin Research
- Vol. 33 (2) , 1603-1625
The structural evolution of pull‐apart basins in response to changes in plate motion
Pull‐apart basins are structural features linked to the interactions between strike‐slip and extensional tectonics. Their morphology and structural evolution are determined by factors such as extension rate, the basin length/width ratio, and changes in extension direction. In this work, we investigate the effect of a change in the plate motion direction on a pull‐apart basin's structure, using analogue modelling experiments with a two‐layer ductile‐brittle configuration to simulate continental crust rheology. We initially impose orthogonal extension on an interconnected rift and strike‐slip system to drive pull‐apart development. Subsequently, we rotate the relative motion vector, imposing transtensional deformation and continuing with this new relative motion vector to the end of the experiment. To compare with natural examples, we analyse the model using seismic interpretation software, generating 3D fault structure and sedimentary thickness interpretations. Results show that the change in the direction of plate motion produces map‐view sigmoidal oblique slip faults that become normal‐slip when deformation adjusts to the new plate motion vector. Furthermore, sediment distribution is strongly influenced by the relative plate rotation, changing the locus of deposition inside the basin at each model stage. Finally, we compare our observations to seismic reflection images, sedimentary package thicknesses and fault interpretations from the Northern Gulf of California and find good agreement between model and nature. Similar fault arrays occur in the Bohai Basin in northern China, which suggests a rotational component in its evolution. More broadly, such similar structures could indicate a role for oblique extension and fault rotation in any pull‐apart basin.
- 7 December 2020
- Published by Wiley in Basin Research
- Vol. 33 (2) , 1603-1625
Open AccessThe structural evolution of pull‐apart basins in response to changes in plate motion
Pull‐apart basins are structural features linked to the interactions between strike‐slip and extensional tectonics. Their morphology and structural evolution are determined by factors such as extension rate, the basin length/width ratio, and changes in extension direction. In this work, we investigate the effect of a change in the plate motion direction on a pull‐apart basin's structure, using analogue modelling experiments with a two‐layer ductile‐brittle configuration to simulate continental crust rheology. We initially impose orthogonal extension on an interconnected rift and strike‐slip system to drive pull‐apart development. Subsequently, we rotate the relative motion vector, imposing transtensional deformation and continuing with this new relative motion vector to the end of the experiment. To compare with natural examples, we analyse the model using seismic interpretation software, generating 3D fault structure and sedimentary thickness interpretations. Results show that the change in the direction of plate motion produces map‐view sigmoidal oblique slip faults that become normal‐slip when deformation adjusts to the new plate motion vector. Furthermore, sediment distribution is strongly influenced by the relative plate rotation, changing the locus of deposition inside the basin at each model stage. Finally, we compare our observations to seismic reflection images, sedimentary package thicknesses and fault interpretations from the Northern Gulf of California and find good agreement between model and nature. Similar fault arrays occur in the Bohai Basin in northern China, which suggests a rotational component in its evolution. More broadly, such similar structures could indicate a role for oblique extension and fault rotation in any pull‐apart basin.
- Open Access
- 24 October 2020
- Published by California Digital Library (CDL) in EarthArXiv
Mapping and classifying large deformation from digital imagery: application to analogue models of lithosphere deformation
Particle Image Velocimetry (PIV), an image cross-correlation technique, is widely used for obtaining velocity fields from series of images of deforming objects. Rather than instantaneous velocities, we are interested in reconstructing cumulative deformation, and use PIV-derived incremental displacements for this purpose. Our focus is on analogue models of tectonic processes, which can accumulate large deformation. Importantly, PIV provides incremental displacements during analogue model evolution in a spatial reference (Eulerian) frame, without the need for explicit markers in a model. We integrate the displacements in a material reference (Lagrangian) frame, such that displacements can be integrated to track the spatial accumulative deformation field as a function of time. To describe cumulative, finite deformation, various strain tensors have been developed, and we discuss what strain measure best describes large shape changes, as standard infinitesimal strain tensors no longer apply for large deformation. PIV or comparable techniques have become a common method to determine strain in analogue models. However, the qualitative interpretation of observed strain has remained problematic for complex settings. Hence, PIV-derived displacements have not been fully exploited before, as methods to qualitatively characterize cumulative, large strain have been lacking. Notably, in tectonic settings, different types of deformation - extension, shortening, strike-slip - can be superimposed. We demonstrate that when shape changes are described in terms of Hencky strains, a logarithmic strain measure, finite deformation can be qualitatively described. Thereby, our method introduces a physically meaningful classification of large 2D strains. We show that our method allows for accurate mapping of tectonic structures in analogue models of lithospheric deformation, and complements visual inspection of fault geometries. Our method can easily discern complex strike-slip shear zones, thrust faults and extensional structures and its evolution in time. Our software to compute deformation is freely available and can be used to post-process incremental displacements from PIV or similar autocorrelation methods.
- 24 October 2020
- Published by California Digital Library (CDL) in EarthArXiv
Open AccessMapping and classifying large deformation from digital imagery: application to analogue models of lithosphere deformation
Particle Image Velocimetry (PIV), an image cross-correlation technique, is widely used for obtaining velocity fields from series of images of deforming objects. Rather than instantaneous velocities, we are interested in reconstructing cumulative deformation, and use PIV-derived incremental displacements for this purpose. Our focus is on analogue models of tectonic processes, which can accumulate large deformation. Importantly, PIV provides incremental displacements during analogue model evolution in a spatial reference (Eulerian) frame, without the need for explicit markers in a model. We integrate the displacements in a material reference (Lagrangian) frame, such that displacements can be integrated to track the spatial accumulative deformation field as a function of time. To describe cumulative, finite deformation, various strain tensors have been developed, and we discuss what strain measure best describes large shape changes, as standard infinitesimal strain tensors no longer apply for large deformation. PIV or comparable techniques have become a common method to determine strain in analogue models. However, the qualitative interpretation of observed strain has remained problematic for complex settings. Hence, PIV-derived displacements have not been fully exploited before, as methods to qualitatively characterize cumulative, large strain have been lacking. Notably, in tectonic settings, different types of deformation - extension, shortening, strike-slip - can be superimposed. We demonstrate that when shape changes are described in terms of Hencky strains, a logarithmic strain measure, finite deformation can be qualitatively described. Thereby, our method introduces a physically meaningful classification of large 2D strains. We show that our method allows for accurate mapping of tectonic structures in analogue models of lithospheric deformation, and complements visual inspection of fault geometries. Our method can easily discern complex strike-slip shear zones, thrust faults and extensional structures and its evolution in time. Our software to compute deformation is freely available and can be used to post-process incremental displacements from PIV or similar autocorrelation methods.
- Open Access
- 2 March 2020
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 39 (3)
Cooling and Vertical Motions of Crustal Wedges Prior to, During, and After Lateral Extrusion in the Eastern Alps: New Field Kinematic and Fission Track Data from the Mur‐Mürz Fault System
New structural and thermochronological (zircon and apatite fission track) data from the eastern most Alps highlight distinct deformation phases affecting the Austroalpine unit along a major sinistral strike‐slip fault system, the Mur‐Mürz fault (MMF). The data link deformation to vertical motions prior to, during, and after the main phase of lateral extrusion of the orogen. Zircon fission track ages document rapid (ca. 15 °C/Myr) and diachronous (eastward younging) cooling and rock exhumation during the latest Cretaceous to Paleocene. Subsequent regional Eocene to early Miocene cooling below the closure temperature of the apatite fission track system occurred at slow rates (ca. 2 °C/Myr), suggesting that the region was not subject to major surface uplift and erosion during that period. Fault kinematic analysis along the MMF document pre‐extrusion NNW‐SSE contraction, middle Miocene syn‐extrusion NE‐SW to NNE‐SSW directed shortening, and Late Miocene E‐W contraction. All phases are characterized by strike‐slip fault regimes. Formation of the complex MMF zone triggered the exhumation of small, fault‐bound crustal blocks within the fault zone as documented by middle Miocene apatite fission track ages. Overall, ages are similar on both sides of the fault suggesting that lateral extrusion along the MMF was not associated with significant differential vertical motions. Local Pliocene rock cooling and exhumation was probably related to the buttressing effect of the underthrust Bohemian basement spur. Whereas large‐scale, post‐extrusion surface uplift of the extruding crustal wedges, such as the “Styrian block,” must have been related to long‐wavelength deformation processes affecting the easternmost Alps.
- 2 March 2020
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 39 (3)
Open AccessCooling and Vertical Motions of Crustal Wedges Prior to, During, and After Lateral Extrusion in the Eastern Alps: New Field Kinematic and Fission Track Data from the Mur‐Mürz Fault System
New structural and thermochronological (zircon and apatite fission track) data from the eastern most Alps highlight distinct deformation phases affecting the Austroalpine unit along a major sinistral strike‐slip fault system, the Mur‐Mürz fault (MMF). The data link deformation to vertical motions prior to, during, and after the main phase of lateral extrusion of the orogen. Zircon fission track ages document rapid (ca. 15 °C/Myr) and diachronous (eastward younging) cooling and rock exhumation during the latest Cretaceous to Paleocene. Subsequent regional Eocene to early Miocene cooling below the closure temperature of the apatite fission track system occurred at slow rates (ca. 2 °C/Myr), suggesting that the region was not subject to major surface uplift and erosion during that period. Fault kinematic analysis along the MMF document pre‐extrusion NNW‐SSE contraction, middle Miocene syn‐extrusion NE‐SW to NNE‐SSW directed shortening, and Late Miocene E‐W contraction. All phases are characterized by strike‐slip fault regimes. Formation of the complex MMF zone triggered the exhumation of small, fault‐bound crustal blocks within the fault zone as documented by middle Miocene apatite fission track ages. Overall, ages are similar on both sides of the fault suggesting that lateral extrusion along the MMF was not associated with significant differential vertical motions. Local Pliocene rock cooling and exhumation was probably related to the buttressing effect of the underthrust Bohemian basement spur. Whereas large‐scale, post‐extrusion surface uplift of the extruding crustal wedges, such as the “Styrian block,” must have been related to long‐wavelength deformation processes affecting the easternmost Alps.
- Open Access
- 19 June 2019
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 38 (6) , 1946-1973
Cretaceous‐Paleogene Tectonics of the Pelagonian Zone: Inferences From Skopelos Island (Greece)
We have investigated subduction‐exhumation processes in the Pelagonian zone, exposed on the Northern Sporades islands (Aegean Sea) related to successive episodes of ocean continent and continent‐continent convergence through integrating multiscale structural analysis, metamorphic petrology, and white mica 40Ar/39Ar dating. Two major progressive phases of ductile deformation are documented, which are related to distinct episodes of tectonic burial and exhumation of the Pelagonian continental margin, which was facing the Neotethys/Vardar ocean. Review of existing data sets from neighboring regions shows that both deformation phases can be correlated along strike up to the Dinarides. The first phase of tectonic burial and exhumation (D1) is characterized by NW‐SE tectonic transport, greenschist facies metamorphism, and Early Cretaceous (~105‐135Ma) 40Ar/39 Ar white mica single fusion ages. D1 is correlated with the initial closure of the Vardar ocean by top‐to‐the‐W to NW ophiolite obduction and the underthrusting of the Pelagonian margin below the oceanic upper plate. Underthrusting was followed by exhumation and the deposition of Late Cretaceous‐Paleogene sediments. The second phase of burial and exhumation (D2) is characterized by NE‐SW tectonic transport, greenschist to blueschist facies metamorphism, and latest Cretaceous‐Early Eocene 40Ar/39 Ar white mica ages of S2 fabrics. Top‐to‐the‐SW shearing is correlated with the tectonic burial of the Pelagonian zone below the Eurasian continent (Rhodopia), while top‐to‐the‐NE shearing is attributed to subsequent extensional exhumation. D2 fabrics record low‐grade P‐T conditions suggesting that the decoupled cover formations exposed on Skopelos were incorporated in an accretionary wedge that formed above the subducting Pelagonian basement during Paleogene times.
- 19 June 2019
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 38 (6) , 1946-1973
Open AccessCretaceous‐Paleogene Tectonics of the Pelagonian Zone: Inferences From Skopelos Island (Greece)
We have investigated subduction‐exhumation processes in the Pelagonian zone, exposed on the Northern Sporades islands (Aegean Sea) related to successive episodes of ocean continent and continent‐continent convergence through integrating multiscale structural analysis, metamorphic petrology, and white mica 40Ar/39Ar dating. Two major progressive phases of ductile deformation are documented, which are related to distinct episodes of tectonic burial and exhumation of the Pelagonian continental margin, which was facing the Neotethys/Vardar ocean. Review of existing data sets from neighboring regions shows that both deformation phases can be correlated along strike up to the Dinarides. The first phase of tectonic burial and exhumation (D1) is characterized by NW‐SE tectonic transport, greenschist facies metamorphism, and Early Cretaceous (~105‐135Ma) 40Ar/39 Ar white mica single fusion ages. D1 is correlated with the initial closure of the Vardar ocean by top‐to‐the‐W to NW ophiolite obduction and the underthrusting of the Pelagonian margin below the oceanic upper plate. Underthrusting was followed by exhumation and the deposition of Late Cretaceous‐Paleogene sediments. The second phase of burial and exhumation (D2) is characterized by NE‐SW tectonic transport, greenschist to blueschist facies metamorphism, and latest Cretaceous‐Early Eocene 40Ar/39 Ar white mica ages of S2 fabrics. Top‐to‐the‐SW shearing is correlated with the tectonic burial of the Pelagonian zone below the Eurasian continent (Rhodopia), while top‐to‐the‐NE shearing is attributed to subsequent extensional exhumation. D2 fabrics record low‐grade P‐T conditions suggesting that the decoupled cover formations exposed on Skopelos were incorporated in an accretionary wedge that formed above the subducting Pelagonian basement during Paleogene times.
- Open Access
- 2 March 2019
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 38 (3) , 823-841
Analogue Modeling of Plate Rotation Effects in Transform Margins and Rift‐Transform Intersections
- 2 March 2019
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 38 (3) , 823-841
Open AccessAnalogue Modeling of Plate Rotation Effects in Transform Margins and Rift‐Transform Intersections
- Open Access
- 19 February 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-8
Pressure build-up and stress variations within the Earth’s crust in the light of analogue models
Strength contrasts and spatial variations in rheology are likely to produce significant stress differences in the Εarth’s crust. The buildup and the relaxation of stresses have important consequences for the state of stress of the brittle crust, its deformational behaviour and seismicity. We performed scaled analogue experiments of a classic wedge-type geometry wherein we introduced a weak, fluid-filled body representing a low-stress heterogeneity. The experiments were coupled to direct pressure measurements that revealed significant pressure differences from their surrounding stressed matrix. The magnitude of the pressure variations is similar to the magnitude of the differential stress of the strongest lithology in the system. When rocks with negligible differential stresses are considered, their pressure can be more than twice larger than the surrounding lithostatic stress. The values of the pressure variations are consistent with the stresses that are estimated in analytical studies. This behaviour is not restricted to a particular scale or rheology, but it requires materials that are able to support different levels of stress upon deformation. For non-creeping rheological behaviours, the stress and pressure variations are maintained even after deformation ceases, implying that these stress variations can be preserved in nature over geological timescales.
- 19 February 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-8
Open AccessPressure build-up and stress variations within the Earth’s crust in the light of analogue models
Strength contrasts and spatial variations in rheology are likely to produce significant stress differences in the Εarth’s crust. The buildup and the relaxation of stresses have important consequences for the state of stress of the brittle crust, its deformational behaviour and seismicity. We performed scaled analogue experiments of a classic wedge-type geometry wherein we introduced a weak, fluid-filled body representing a low-stress heterogeneity. The experiments were coupled to direct pressure measurements that revealed significant pressure differences from their surrounding stressed matrix. The magnitude of the pressure variations is similar to the magnitude of the differential stress of the strongest lithology in the system. When rocks with negligible differential stresses are considered, their pressure can be more than twice larger than the surrounding lithostatic stress. The values of the pressure variations are consistent with the stresses that are estimated in analytical studies. This behaviour is not restricted to a particular scale or rheology, but it requires materials that are able to support different levels of stress upon deformation. For non-creeping rheological behaviours, the stress and pressure variations are maintained even after deformation ceases, implying that these stress variations can be preserved in nature over geological timescales.
- Open Access
- 24 March 2017
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 36 (3) , 542-558
Oblique contractional reactivation of inherited heterogeneities: Cause for arcuate orogens
We use lithospheric-scale analog models to study the reactivation of pre-existing heterogeneities under oblique shortening and its relation to the origin of arcuate orogens. Reactivation of inherited rheological heterogeneities is an important mechanism for localization of deformation in compressional settings and consequent initiation of contractional structures during orogenesis. However, the presence of an inherited heterogeneity in the lithosphere is in itself not sufficient for its reactivation once the continental lithosphere is shortened. The heterogeneity orientation is important in determining if reactivation occurs and to which extent. This study aims at giving insights on this process by means of analog experiments in which a linear lithospheric heterogeneity trends with various angles to the shortening direction. In particular, the key parameter investigated is the orientation (angle α) of a strong domain (SD) with respect to the shortening direction. Experimental results show that angles α ≥ 75° (high obliquity) allow for reactivation along the entire SD and the development of a linear orogen. For α ≤ 60° (low obliquity) the models are characterized by the development of an arcuate orogen, with the SD remaining partially non-reactivated. These results provide a new mechanism for the origin of some arcuate orogens, in which orocline formation was not driven by indentation or subduction processes, but by oblique shortening of inherited heterogeneities, as exemplified by the Ouachita orogen of the southern U.S.
- 24 March 2017
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 36 (3) , 542-558
Open AccessOblique contractional reactivation of inherited heterogeneities: Cause for arcuate orogens
We use lithospheric-scale analog models to study the reactivation of pre-existing heterogeneities under oblique shortening and its relation to the origin of arcuate orogens. Reactivation of inherited rheological heterogeneities is an important mechanism for localization of deformation in compressional settings and consequent initiation of contractional structures during orogenesis. However, the presence of an inherited heterogeneity in the lithosphere is in itself not sufficient for its reactivation once the continental lithosphere is shortened. The heterogeneity orientation is important in determining if reactivation occurs and to which extent. This study aims at giving insights on this process by means of analog experiments in which a linear lithospheric heterogeneity trends with various angles to the shortening direction. In particular, the key parameter investigated is the orientation (angle α) of a strong domain (SD) with respect to the shortening direction. Experimental results show that angles α ≥ 75° (high obliquity) allow for reactivation along the entire SD and the development of a linear orogen. For α ≤ 60° (low obliquity) the models are characterized by the development of an arcuate orogen, with the SD remaining partially non-reactivated. These results provide a new mechanism for the origin of some arcuate orogens, in which orocline formation was not driven by indentation or subduction processes, but by oblique shortening of inherited heterogeneities, as exemplified by the Ouachita orogen of the southern U.S.