NZNaigen Zhou

Naigen Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Naigen Zhou has a total of 200 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fluorosulfonyl Additive-Reinforced Interphases for High-Voltage and Fast-Charging Lithium Metal Batteries

    by Xue Li, Yuxin Rao, Shangquan Zhao, Naigen Zhou, Fei Luo, Xiang Liu, Yong Li, Stefano Passerini, Shan Fang

    Electrolytes capable of simultaneously stabilizing lithium metal anodes and high-nickel cathodes under high-voltage and high-rate operation are essential for practical lithium metal batteries yet remain difficult to realize. Here, methyl fluorosulfonyldifluoroacetate (MDFSA) is introduced as an electrolyte additive to regulate the Li+ solvation structure in an ether–carbonate co-solvent electrolyte. MDFSA weakens the coordination of 1,2-dimethoxyethane (DME) with Li+ and promotes the involvement of DFOB– in the solvation sheath, facilitating the formation of robust inorganic-rich interphases at both the lithium metal anode and the cathode. The optimized electrolyte enables Li||LiNi0.91Co0.06Mn0.03O2 cells to deliver 75.8% capacity retention after 500 cycles at 4.5 V and 1 C and 80.53% capacity retention after 500 cycles at 4.3 V and 4 C. These results highlight the effectiveness of fluorosulfonyl additive-enabled solvation and interphase regulation for improving the high-voltage stability, rate capability, and cycling durability of lithium metal batteries.


  • Open Access

    Breaking the Polarity–Coordination Coupling in Electrolyte Design for High‐Voltage Lithium Batteries

    by Xue Li, Shangquan Zhao, Yifan Wu, Naigen Zhou, Fei Luo, Runze Liu, Chengjin Peng, Junzhi Li, Stefano Passerini, Shan Fang

    Electrolyte design is fundamentally constrained by the trade‐off between high solvent polarity and weak Li + solvation, as polar solvents typically bind Li + strongly. Here, we establish a steric–electronic modulation strategy that decouples solvent polarity from Li + coordination, enabling a generalizable pseudo‐weak solvation electrolyte design paradigm. Based on this principle, a steric hindrance–mediated electrolyte is developed combining 2,2,2‐trifluoro‐N, N‐dimethylethylamide (DMTFA) and fluoroethylene carbonate (FEC) with dual lithium salts. Despite its strong polarity, DMTFA exhibits weak Li + coordination due to the combined steric hindrance and electron‐withdrawing effects of the ‐CF 3 group, enabling anion‐ dominated solvation structures. This coordination chemistry lowers Li + desolvation barriers and drives the preferential adsorption of a B‐ and P‐rich interphase layer at the cathode surface, thereby protecting the cathode from HF corrosion. The resulting electrolyte achieves high ionic conductivity, intrinsic flame retardancy, and an electrochemical stability window exceeding 5.0 V. Cells employing LiNi 0.91 Co 0.06 Mn 0.03 O 2 cathodes demonstrate a capacity retention of over 90.0% after 100 cycles at 1 C rate and 4.8 V charge cut‐off. The electrolyte enables approximately 1.6 Ah pouch cells to retain 84.97% capacity after 1800 cycles at 4.6 V.


  • Open Access

    Metal-vacancy-rich layered double hydroxides for ampere-level acidic water oxidation

    by Neng Li, Naigen Zhou, Ke Xiao, Xuxu Wang, Zhen Liu

    Proton exchange membrane (PEM) water electrolysis is vital for green hydrogen production, but its acidic oxygen evolution reaction (OER) is hindered by sluggish kinetics and catalyst delamination. To address this, a self-supported electrode was fabricated by anchoring Ru-deficient layered double hydroxides on a natural camphorwood substrate (NiRuv-LDH). Camphorwood's 3D hierarchical porous architecture provides structural integrity and hydrophilic microchannels that accelerate mass transport and gas release, eliminating polymeric binders. A chemical etching strategy successfully introduced atomic-scale Ru vacancies, reconfiguring the local electronic structure, reducing the rate-determining step barrier to 1.52 eV, and lowering the OER overpotential to 215 mV at 10 mA cm-2. In a PEM electrolyzer, the catalyst required only 1.75 V at 1.0 A cm-2 and demonstrated over 2,000 h of industrial-grade stability. Techno-economic analysis confirms its exceptional commercial viability, achieving a hydrogen production cost of ~US$ 0.3 per kg.

  • Open Access

    Suppressing Lattice Oxygen-Induced Interfacial Degradation via a Multifunctional Siloxane Additive for 4.8 V LRMO‖Li Batteries

    by Guiqiang Ai, Changquan Wu, Rui Su, Xuerui Yang, Naigen Zhou

    Lithium-rich manganese-based oxides (LRMO) are promising cathodes for high-energy-density lithium-metal batteries owing to their high operating voltage and large reversible capacity, but suffer from severe interfacial degradation at high voltages (≥4.8 V), primarily triggered by lattice oxygen release, electrolyte oxidation, and HF-induced corrosion. Herein, we design a multifunctional siloxane-based electrolyte additive, 1,3,5-tris(3,3,3-trifluoropropyl)methylcyclotrisiloxane (TFSO), to regulate these coupled degradation processes. TFSO simultaneously acts as an oxygen scavenger and HF trap, suppressing lattice oxygen reactivity while converting HF into stable Si-F/Si-O species. Meanwhile, it promotes the formation of robust, inorganic-rich CEI/SEI layers, enabling dual interfacial stabilization and uniform lithium deposition. In addition, TFSO reconstructs the Li+ solvation structure, reducing solvent participation in interfacial side reactions. As a result, the LRMO‖Li cell achieves 92.7% capacity retention after 300 cycles at 4.8 V, along with excellent wide-temperature performance (82.7% at 55 °C and 160 mAh g-1 at 0 °C). This work highlights an effective electrolyte design strategy for mitigating oxygen-triggered interfacial degradation in high-voltage lithium metal batteries.

  • Open Access

    Succinic Anhydride as a Bifunctional Electrolyte Additive Enabling Self-Purification and Dual-Interphase Stabilization in High-Energy Lithium-Ion Batteries

    by Changquan Wu, Yifan Wu, Xinru Li, Xiaokang Qin, Xuerui Yang, Xiaowei Huang, Naigen Zhou

    The development of high-energy lithium-ion batteries based on Ni-rich cathodes and silicon-based anodes is severely hindered by interfacial instability, especially under elevated temperatures. Herein, we report succinic anhydride (SA) as a bifunctional electrolyte additive that simultaneously regulates both the cathode electrolyte interphase (CEI) and solid electrolyte interphase (SEI) through a unique self-purifying mechanism. SA undergoes spontaneous hydrolysis to generate succinic acid, which effectively scavenges HF and chelates dissolved transition-metal ions, thereby suppressing interfacial corrosion and cross-electrode contamination. Meanwhile, SA preferentially participates in interfacial reactions due to its tailored electronic structure, forming a robust LiF-rich CEI on the NCM613 cathode and a flexible organic-rich SEI on the Si–C anode. This dual interphase regulation stabilizes electrode structures and mitigates continuous electrolyte decomposition. As a result, high-loading NCM613 (16 mg/cm2) ||Si–C full cells exhibit significantly improved cycling stability, delivering 88% capacity retention after 200 cycles at 45 °C. Guided by this mechanism, a dual-anhydride derivative (BDA) is further designed, achieving over 80% capacity retention after 400 cycles under the same conditions. This work establishes a self-purifying interfacial regulation strategy and provides a general design principle for advanced electrolyte additives in high-voltage and high-temperature lithium-ion batteries.

  • Open Access

    pH‐Regulated Organic–Inorganic Additive Engineering for Dendrite‐Free and Long‐Life Aqueous Zinc‐Ion Batteries

    by Runze Liu, YiFan Wu, Shan Fang, Xue Li, Chengjin Peng, Liqiang Kang, Xiang Liu, Naigen Zhou, Yen Wei

    Aqueous zinc‐ion batteries (AZIBs) are promising candidates for large‐scale energy storage systems due to their inherent high safety, low cost, and environmental friendliness. However, their practical employment is hindered by dendrite growth, hydrogen evolution reaction (HER), and interfacial corrosion, which severely degrade cycling stability. This study proposes a synergistic organic–inorganic d ual additives strategy that simultaneously regulates zinc deposition, suppresses parasitic reactions, and stabilizes electrode interfaces. The organic additive nonafluorobutane‐1‐sulfonic acid (FBSA) tailors the electrolyte solvation structure, while the inorganic additive diammonium phosphate (DAP) enhances ionic conductivity and the zinc ion transference number (t + ). A pH‐regulated optimization enables the formation of a robust hybrid organic–inorganic solid electrolyte interphase (SEI) layer on the zinc anode. Moreover, this combined additive strategy disrupts the water hydrogen‐bonding network, effectively mitigating HER. Benefiting from these synergistic effects, Zn||Zn symmetric cells exhibit ultra‐stable cycling exceeding 2800 h at 5 mA cm −2 . The Zn||MnO 2 full cell maintains a capacity above 100 mAh g −1 after 1000 cycles at 1 A g −1 . This work elucidating the synergistic mechanism of organic–inorganic dual additives provides a new electrolyte design paradigm for high‐performance AZIBs.


  • Open Access

    Synergistic halide and phosphate ester electrolytes for overcoming corrosion and interfacial challenges in magnesium batteries

    by Xuerui Yang, Yuqi Zhou, Junkun Zhou, Xuan Huang, Xin Ao, Guangni Ding, Xiaowei Huang, Naigen Zhou, Guanglei Cui, Yong Yang

    A synergistic halide and phosphate ester electrolyte regulates Mg 2+ solvation and forms a robust inorganic-rich interphase, suppressing corrosion, enhancing Mg 2+ transport, and providing a general framework for high-voltage multivalent batteries.