Vigdis Olden
Research Subjects
Vigdis Olden has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
Antonio Alvaro
13 shared publications- Odd Magne Akselsen
SINTEF Industry, Trondheim, Norway
11 shared publications Roy Johnsen
6 shared publicationsChristian Thaulow
5 shared publications- Di Wan
Yangtze Delta Region Academy of Beijing Institute of Technology
4 shared publications - Jianying He
Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway
4 shared publications
Latest Publications
- 7 August 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 82, 1146-1156
Experimental determination of equivalent hydrogen gas pressure from electrochemical hydrogen charging
- 7 August 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 82, 1146-1156
Experimental determination of equivalent hydrogen gas pressure from electrochemical hydrogen charging
- Open Access
- 26 June 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 136, 672-685
Safe pipelines for hydrogen transport
- 26 June 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 136, 672-685
Open AccessSafe pipelines for hydrogen transport
- Open Access
- 21 March 2024
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 301
Assessing fracture toughness of vintage and modern X65 pipeline steels under in situ electrochemical hydrogen charging using advanced testing methodology
- 21 March 2024
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 301
Open AccessAssessing fracture toughness of vintage and modern X65 pipeline steels under in situ electrochemical hydrogen charging using advanced testing methodology
- Open Access
- 1 February 2024
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 894, 146175
Experimental and numerical study on hydrogen-induced failure of X65 pipeline steel
- 1 February 2024
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 894, 146175
Open AccessExperimental and numerical study on hydrogen-induced failure of X65 pipeline steel
- Open Access
- 1 October 2019
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 219
Hydrogen enhanced fatigue crack growth rates in a ferritic Fe-3 wt%Si alloy and a X70 pipeline steel
- 1 October 2019
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 219
Open AccessHydrogen enhanced fatigue crack growth rates in a ferritic Fe-3 wt%Si alloy and a X70 pipeline steel
- Open Access
- 1 August 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (15) , 3118
Metallurgical Aspects in the Welding of Clad Pipelines—A Global Outlook
In the present work, the metallurgical changes in the welding of clad pipelines are studied. Clad pipes consist of a complex multi-material system, with (i) the clad being stainless steel or a nickel-based superalloy, (ii) the pipe being API X60 or X65 high-strength carbon steel, and (iii) the welding wire being a nickel-based superalloy or stainless steel in the root and hot pass, with a nickel or iron buffer layer, followed by filling with carbon steel wire. Alternatively, the corrosion resistant alloy may be used only. During production of the clad pipe, at the diffusion bonding temperature, substantial material changes may occur. These are carbon diffusion from the carbon steel to the clad, followed by the formation of hard martensite at the interface on cooling. The solidification behavior and microstructure evolution in the weld metal and in the heat-affected zone are further discussed for the different material combinations. Solidification behavior was also numerically estimated to show solidification parameters and resulting solidification modes.
- 1 August 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (15) , 3118
Open AccessMetallurgical Aspects in the Welding of Clad Pipelines—A Global Outlook
In the present work, the metallurgical changes in the welding of clad pipelines are studied. Clad pipes consist of a complex multi-material system, with (i) the clad being stainless steel or a nickel-based superalloy, (ii) the pipe being API X60 or X65 high-strength carbon steel, and (iii) the welding wire being a nickel-based superalloy or stainless steel in the root and hot pass, with a nickel or iron buffer layer, followed by filling with carbon steel wire. Alternatively, the corrosion resistant alloy may be used only. During production of the clad pipe, at the diffusion bonding temperature, substantial material changes may occur. These are carbon diffusion from the carbon steel to the clad, followed by the formation of hard martensite at the interface on cooling. The solidification behavior and microstructure evolution in the weld metal and in the heat-affected zone are further discussed for the different material combinations. Solidification behavior was also numerically estimated to show solidification parameters and resulting solidification modes.
- 1 February 2019
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 44 (10) , 5030-5042
Hydrogen-enhanced fatigue crack growth behaviors in a ferritic Fe-3wt%Si steel studied by fractography and dislocation structure analysis
- 1 February 2019
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 44 (10) , 5030-5042
Hydrogen-enhanced fatigue crack growth behaviors in a ferritic Fe-3wt%Si steel studied by fractography and dislocation structure analysis
- 19 October 2018
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 50 (1) , 451-456
Decohesion Energy of $\Sigma 5(012)$ Grain Boundaries in Ni as Function of Hydrogen Content- 19 October 2018
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 50 (1) , 451-456
Decohesion Energy of $\Sigma 5(012)$ Grain Boundaries in Ni as Function of Hydrogen Content- Open Access
- 25 May 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 165, 03004
Hydrogen-assisted fatigue crack growth in ferritic steels – a fractographic study
Fatigue crack growth (FCG) behavior of a Fe-3wt.%Si ferritic alloy under different environmental conditions using in-situ electrochemical (cathodic) hydrogen (H) charging has been investigated. Three frequencies have been applied. Results clearly show that the FCG rate increased by a factor spanning from 20 to 1000 times, depending on the loading frequencies, when compared to the reference test in air. Lower frequency leads to higher FCG rate. A comprehensive fractographic analysis was carried out: the area fraction of different fracture surface features was measured and taken into statistical analysis. Based on these investigations, the possible mechanisms of H-enhanced FCG are discussed. Similar tests in high-pressure H gas from other studies were also compared and discussed. These results give a preliminary understanding of H effect in fatigue crack propagation procedure in ferritic alloys.
- 25 May 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 165, 03004
Open AccessHydrogen-assisted fatigue crack growth in ferritic steels – a fractographic study
Fatigue crack growth (FCG) behavior of a Fe-3wt.%Si ferritic alloy under different environmental conditions using in-situ electrochemical (cathodic) hydrogen (H) charging has been investigated. Three frequencies have been applied. Results clearly show that the FCG rate increased by a factor spanning from 20 to 1000 times, depending on the loading frequencies, when compared to the reference test in air. Lower frequency leads to higher FCG rate. A comprehensive fractographic analysis was carried out: the area fraction of different fracture surface features was measured and taken into statistical analysis. Based on these investigations, the possible mechanisms of H-enhanced FCG are discussed. Similar tests in high-pressure H gas from other studies were also compared and discussed. These results give a preliminary understanding of H effect in fatigue crack propagation procedure in ferritic alloys.
- Open Access
- 1 January 2018
- Published by Elsevier in Procedia Structural Integrity
- Vol. 13, 1514-1520
Hydrogen Enhanced Fatigue Crack Growth Rates in a Ferritic Fe-3wt%Si Alloy
- 1 January 2018
- Published by Elsevier in Procedia Structural Integrity
- Vol. 13, 1514-1520
Open AccessHydrogen Enhanced Fatigue Crack Growth Rates in a Ferritic Fe-3wt%Si Alloy