Pavan Kalyan Lingampally
Pavan Kalyan Lingampally has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Arockia Selvakumar Arockia Doss
School of Mechanical Engineering, Vellore Institute of Technology, Chennai, India
2 shared publications - Devashish Sharma
Hindustan Institute of Technology and Science
1 shared publication - Kuppan Chetty Ramanathan
SASTRA Deemed To Be University
1 shared publication - Manju Mohan
Centre for Automation and Robotics, Department of Mechatronics Engineering, Hindustan Institute of Technology and Science, Chennai, INDIA
1 shared publication Sahil Ahamed Shaik
Hindustan Institute of Technology and Science
1 shared publicationSaran Rajagopal
Hindustan Institute of Technology and Science
1 shared publication
Latest Publications
- Open Access
- 1 December 2024
- Published by Institute of Advanced Engineering and Science in IAES International Journal of Robotics and Automation (IJRA)
- Vol. 13 (4) , 423-431
Design and development of knee rehabilitation robot
This research presents a comprehensive design and analysis of a knee rehabilitation platform aimed at aiding individuals with knee dysfunction. Dysfunction in the knee joint can lead to an imbalance in gait and posture during activities of daily living (ADLs) such as standing, walking, and running. This study focuses on developing a 2-degree-of-freedom (2-DoF) knee rehabilitation device capable of mimicking linear and angular movements. A slider mechanism-based knee rehabilitation device is developed and simulated alongside various other mechanisms. The proposed mechanism achieves 32.5° of flexion for a linear movement of 0.45 m within 6 seconds, outperforming other mechanisms. To validate simulation results, a 3D-printed model is fabricated, and experimental studies are conducted under no-load conditions, showing close alignment with simulation outcomes with a deviation of ±5%. The device’s key features include portability, compliance, compactness, and enhanced stiffness. Future research will involve conducting pilot studies to further evaluate the practical efficacy and potential enhancements of the proposed knee rehabilitation platform.
- 1 December 2024
- Published by Institute of Advanced Engineering and Science in IAES International Journal of Robotics and Automation (IJRA)
- Vol. 13 (4) , 423-431
Open AccessDesign and development of knee rehabilitation robot
This research presents a comprehensive design and analysis of a knee rehabilitation platform aimed at aiding individuals with knee dysfunction. Dysfunction in the knee joint can lead to an imbalance in gait and posture during activities of daily living (ADLs) such as standing, walking, and running. This study focuses on developing a 2-degree-of-freedom (2-DoF) knee rehabilitation device capable of mimicking linear and angular movements. A slider mechanism-based knee rehabilitation device is developed and simulated alongside various other mechanisms. The proposed mechanism achieves 32.5° of flexion for a linear movement of 0.45 m within 6 seconds, outperforming other mechanisms. To validate simulation results, a 3D-printed model is fabricated, and experimental studies are conducted under no-load conditions, showing close alignment with simulation outcomes with a deviation of ±5%. The device’s key features include portability, compliance, compactness, and enhanced stiffness. Future research will involve conducting pilot studies to further evaluate the practical efficacy and potential enhancements of the proposed knee rehabilitation platform.
- Open Access
- 1 January 2019
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in FME Transactions
- Vol. 47 (3) , 405-411
A kinematic and workspace analysis of a parallel rehabilitation device for head-neck injured patients
Current treatment for patients suffering from cervical spine injuries is by static braces which causes discomfort and immobilization of the neck. This paper presents a novel comfortable wearable therapy device for treating patients suffering with head/neck posture problems using parallel mechanism concept. To achieve this, a conceptual design of a three-degrees-of-freedom Revolute-Prismatic-Spherical configuration parallel manipulator with 3 extensible links is proposed. However, precision and workspace are the general considerations for designing a parallel manipulator. In this research, workspace and position analysis is carried out for the device. By applying geometrical method and vector-loop approach, the inverse kinematics equations are derived. The parallel manipulator is modeled using SolidWorks and simulated using MATLAB. From the simulation results, stroke length of the actuators, angular tilt and position of the moving platform is obtained. To validate the simulation results a preliminary prototype is built and tests were carried. The obtained results found to be satisfying the cause of the research. Furthermore, the device needs to automated and safely operated under the therapist supervision.
- 1 January 2019
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in FME Transactions
- Vol. 47 (3) , 405-411
Open AccessA kinematic and workspace analysis of a parallel rehabilitation device for head-neck injured patients
Current treatment for patients suffering from cervical spine injuries is by static braces which causes discomfort and immobilization of the neck. This paper presents a novel comfortable wearable therapy device for treating patients suffering with head/neck posture problems using parallel mechanism concept. To achieve this, a conceptual design of a three-degrees-of-freedom Revolute-Prismatic-Spherical configuration parallel manipulator with 3 extensible links is proposed. However, precision and workspace are the general considerations for designing a parallel manipulator. In this research, workspace and position analysis is carried out for the device. By applying geometrical method and vector-loop approach, the inverse kinematics equations are derived. The parallel manipulator is modeled using SolidWorks and simulated using MATLAB. From the simulation results, stroke length of the actuators, angular tilt and position of the moving platform is obtained. To validate the simulation results a preliminary prototype is built and tests were carried. The obtained results found to be satisfying the cause of the research. Furthermore, the device needs to automated and safely operated under the therapist supervision.
- 1 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A humanoid neck using parallel manipulators
This paper presents a detailed review on humanoid robotic neck mechanism using a parallel manipulator. As the human neck is central to head and torso, the neck dictates the position and movement of the head. Mimicking the movement of a human head can be achieved in the robot by using parallel manipulators. In general, the parallel manipulators are referred as the Stewart Platform. As the neck in the human body plays a prominent role in interacting with the human world, the neck region carries a heavy load of the head which incorporates the system like Vision, Speech and Speech Recognition to provide a more humanly nature environment. Reason for using parallel manipulators in neck, is to balance the head while achieving rotation, flexion motions practically which is highly impossible. This is the area where the researches are concentrating to achieve results closer to the human neck motion. Based on this, the active studies in this field are examined to determine different trends of research and to identify the unexplained problems. Stewart Platforms current trends and the required analysis and designs of the platform are also listed.
- 1 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A humanoid neck using parallel manipulators
This paper presents a detailed review on humanoid robotic neck mechanism using a parallel manipulator. As the human neck is central to head and torso, the neck dictates the position and movement of the head. Mimicking the movement of a human head can be achieved in the robot by using parallel manipulators. In general, the parallel manipulators are referred as the Stewart Platform. As the neck in the human body plays a prominent role in interacting with the human world, the neck region carries a heavy load of the head which incorporates the system like Vision, Speech and Speech Recognition to provide a more humanly nature environment. Reason for using parallel manipulators in neck, is to balance the head while achieving rotation, flexion motions practically which is highly impossible. This is the area where the researches are concentrating to achieve results closer to the human neck motion. Based on this, the active studies in this field are examined to determine different trends of research and to identify the unexplained problems. Stewart Platforms current trends and the required analysis and designs of the platform are also listed.