DCDaniel R. Cooper

Daniel R. Cooper

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Daniel R. Cooper has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • From access to confidence: Closing the 3D printing self-efficacy gap with a brief mandatory exercise

    by Peter Fabe, Parth Vaishnav, Daniel R Cooper

    Additive manufacturing (AM) competence is increasingly expected of mechanical engineering graduates, but AM training comparable to that of traditional manufacturing tools can seem difficult to fit into existing coursework. Printer access alone leaves students roughly one Likert point less confident in operating and producing parts with fused filament fabrication (FFF) printers than with the traditionally taught tools of mills, lathes, and computer-aided design (CAD). This five-semester study tests whether a deliberately minimal mandatory exercise, where students individually slice, transfer, and print one part within an existing laboratory session (∼15 min; under US$4 per student including hardware), closes that gap. In the mandatory-exercise semester (n = 85), post-semester FFF self-efficacy was statistically equivalent to mill, lathe, and CAD within ±0.5 points (Holm-adjusted equivalence p < .002). Low FFF self-efficacy fell from 17–22% under access alone to 1.2% (p < .001), and team-level FFF non-use fell from 21% to 5% (p = .03). When the exercise was made optional (n = 107; estimated completion below 20%) while all other changes retained, the gap re-emerged (10–11% low self-efficacy; equivalence rejected throughout), supporting, though not confirming, that a mandatory exercise closes the gap. A brief mandatory, individual FFF exercise is thus a low-cost, high-value addition to design and manufacturing coursework.

  • Open Access

    Cross life cycle opportunities for increasing the post-consumer recycled content of aluminum automotive body sheet in the United States

    by Alissa Tsai, Yongxian Zhu, Mohammadreza Heidari, Daniel R. Cooper

    Increasing the post-consumer recycled content (PCRC) of aluminum automotive body sheet (ABS) is a promising pathway to reduce greenhouse gas (GHG) emissions from ABS production. However, progress is constrained by the limited end-of-life vehicle (ELV) ABS scrap available and the compositional mismatches between contaminated scrap streams and alloy specifications. This study identifies cross ABS life cycle strategies that sheet mills, automotive OEMs, and recyclers can implement and quantifies their effects using a composition-specific dynamic material flow analysis to model sheet demand and scrap availability coupled with a linear optimization framework that determines annual PCRC potential under product-demand, scrap-supply, and alloy-composition constraints. A supply chain emissions model links PCRC gains to GHG reductions. By 2050, ABS scrap from U.S. ELVs could supply up to 33% of the ABS ingot demand needed to meet U.S. requirements for ABS components, yet PCRC remains negligible under business-as-usual (BAU) strategies due to compositional incompatibilities. Effective strategies to increase the PCRC include: (1) sheet mills developing high-residual-content (HRC) “recycle-friendly” alloys; (2) OEMs shifting 5xxx-series component designs to 6xxx alloys; and (3) recyclers either extracting sheet-rich sub-assemblies before shredding or adopting advanced sorting technologies to separate shredded ELV aluminum scrap by alloy series. Achieving a PCRC that approaches the physical maximum (33%) occurs only when multiple stakeholders act to implement complementary strategies. The combination of ELV scrap sorting by alloy series and deployment of HRC alloys is particularly effective. Together, these measures could raise PCRC to 28% by 2050, increase total scrap content (including production scrap) to 76%, and cut annual ABS component supply chain emissions by up to 42%.

  • Open Access

    Cross life cycle opportunities for increasing the post-consumer recycled content of aluminum automotive body sheet in the United States

    by Alissa Tsai, Yongxian Zhu, Mohammadreza Heidari, Daniel Cooper

    Increasing the post-consumer recycled content (PCRC) of aluminum automotive body sheet (ABS) is a promising pathway to reduce greenhouse gas (GHG) emissions from ABS production. However, progress is constrained by the limited end-of-life vehicle (ELV) ABS scrap available and the compositional mismatches between contaminated scrap streams and alloy specifications. This study identifies design-for-recycling strategies that sheet mills, automotive OEMs, and recyclers can implement and quantifies their effects using a composition-specific dynamic material flow analysis to model sheet demand and scrap availability coupled with a linear optimization framework that determines annual PCRC potential under product-demand, scrap-supply, and alloy-composition constraints. A supply-chain emissions model links PCRC gains to GHG reductions. By 2050, ELV-derived ABS scrap could supply 33% of ingot demand, yet PCRC remains negligible under business-as-usual due to compositional incompatibilities. Effective strategies to increase the PCRC include: (1) sheet mills developing high-residual-content (HRC) “recycle-friendly” alloys; (2) OEMs shifting 5xxx-series component designs to 6xxx alloys; and (3) recyclers either extracting sheet-rich sub-assemblies before shredding or adopting advanced sorting technologies to separate shredded ELV aluminum scrap by alloy series. However, substantial increases above a PCRC of 15% occur only when multiple stakeholders act to implement synergistic strategies. The concurrent pursuit of ELV scrap sortation by alloy series and deployment of HRC alloys is especially impactful. Under such coordinated action, a PCRC level of up to 28% by 2050—and a total scrap content (including production scrap) of 76%—is achievable, potentially reducing annual supply-chain emissions from ABS component production by up to 42%.

  • Open Access

    Intelligent data collection for reducing network structure uncertainty in material flow analysis using Bayesian optimal experimental design

    by Jiankan Liao, Xun Huan, Daniel Cooper

    Material flow analyses (MFAs) are powerful tools for highlighting resource efficiency opportunities in supply chains. MFAs are often represented as directed graphs, with nodes denoting processes and edges representing mass flows. However, network structure uncertainty—uncertainty in the presence or absence of flows between nodes—is common and can compromise flow predictions. While collection of more MFA data can reduce network structure uncertainty, an intelligent data acquisition strategy is crucial to optimize the resources (person‐hours and money spent on collecting and purchasing data) invested in constructing an MFA. In this study, we apply Bayesian optimal experimental design, based on the Kullback–Leibler divergence, to efficiently target high‐utility MFA data—data that minimizes network structure uncertainty. We introduce a new method with reduced bias for estimating expected utility, demonstrating its superior accuracy over traditional approaches. We illustrate these advances with a case study on the US steel sector MFA, where the expected utility of collecting specific single pieces of steel mass flow data aligns with the actual reduction in network structure uncertainty achieved by collecting said data from the United States Geological Survey and the World Steel Association. The results highlight that the optimal MFA data to collect depends on the total amount of data being gathered, making it sensitive to the scale of the data collection effort. Overall, our methods support intelligent data acquisition strategies, accelerating uncertainty reduction in MFAs and enhancing their utility for impact quantification and informed decision‐making.


  • Open Access

    Investigating a novel approach to reduce transverse weld scrap in aluminum extrusion using profiled dummy blocks and billets

    by Muhammad Umar Farooq, Gregory Oberhausen, Daniel R. Cooper

    The supply chains of extruded aluminum are materially inefficient, with up to two-fifths of the billet being scrapped before the profile is incorporated into a final product. A significant source of process scrap arises from removing the tongue-shaped transverse weld—also known as the front-end defect or charge weld—that is formed between the consecutive billets being extruded, primarily because of concerns over weld integrity. Optimizing process settings and die geometry can reduce the transverse weld length—and thus the amount of scrapped material—but only by approximately 15%. We investigate a novel methodology for significant scrap reduction, where an initially profiled interface—rather than a flat one—between consecutively extruded billets compensates for the differential velocities of material across the billet cross-section as it moves through the die ports, resulting in shorter welds. This profiled interface is created using profiled billets that fit into a dummy block shaped with the inverse of the billet profile. We present a design process to define the shape of the profiled dummy block and billet. For a given part, we first determine the ideal shape by obtaining the velocity field from finite element simulations of the conventional extrusion process, assuming perfectly rigid tooling and no constraints on the creation of profiled tooling or billets. Next, we rationalize this shape by applying stress and deflection limits to the dummy block, ensuring it avoids plastic deformation and interference with the container wall. Additionally, we consider ductile damage limits for the billet to prevent cracking during a pre-extrusion hot forging stage, which is one method of generating profiled billets. The design process is applied to four profiles of increasing complexity: solid round and rectangular bars, a square-tube hollow, and a complex multi-hollow profile. Extrusion and forging trials using custom-built tooling are conducted to validate the design process. The experimental case studies demonstrate that profiled dummy blocks and billets can achieve weld length reductions of over 50% and that the same tooling can offer scrap savings across a range of similar extruded shapes. In the tests, a profiled dummy block with an air escape vent showed zero-to-negligible plastic deformation and neither air entrapment nor clogging of the vent during extrusion, while a conventional billet was hot-forged to produce profiled ends without cracking or deforming the forging tools. Overall, this study highlights that profiled billet extrusion is a promising technology for significantly reducing scrap from transverse weld removal in aluminum extrusions.


  • Open Access

    Investigating a novel approach to reduce transverse weld scrap in aluminum extrusion using profiled dummy blocks and billets

    by Muhammad Umar Farooq, Gregory Oberhausen, Daniel R. Cooper

    The supply chains of extruded aluminum are materially inefficient, with up to two-fifths of the billet being scrapped before the profile is incorporated into a final product. A significant source of process scrap arises from removing the tongue-shaped transverse weld—also known as the front-end defect or charge weld—that is formed between the consecutive billets being extruded, primarily because of concerns over weld integrity. Optimizing process settings and die geometry can reduce the transverse weld length—and thus the amount of scrapped material—but only by approximately 15%. We investigate a novel methodology for significant scrap reduction, where an initially profiled interface—rather than a flat one—between consecutively extruded billets compensates for the differential velocities of material across the billet cross-section as it moves through the die ports, resulting in shorter welds. This profiled interface is created using profiled billets that fit into a dummy block shaped with the inverse of the billet profile. We present a design process to define the shape of the profiled dummy block and billet. For a given part, we first determine the ideal shape by obtaining the velocity field from finite element simulations of the conventional extrusion process, assuming perfectly rigid tooling and no constraints on the creation of profiled tooling or billets. Next, we rationalize this shape by applying stress and deflection limits to the dummy block, ensuring it avoids plastic deformation and interference with the container wall. Additionally, we consider ductile damage limits for the billet to prevent cracking during a pre-extrusion hot forging stage, which is one method of generating profiled billets. The design process is applied to four profiles of increasing complexity: solid round and rectangular bars, a square-tube hollow, and a complex multi-hollow profile. Extrusion and forging trials using custom-built tooling are conducted to validate the design process. The experimental case studies demonstrate that profiled dummy blocks and billets can achieve weld length reductions of over 50% and that the same tooling can offer scrap savings across a range of similar extruded shapes. In the tests, a profiled dummy block with an air escape vent showed zero-to-negligible plastic deformation and neither air entrapment nor clogging of the vent during extrusion, while a conventional billet was hot-forged to produce profiled ends without cracking or deforming the forging tools. Overall, this study highlights that profiled billet extrusion is a promising technology for significantly reducing scrap from transverse weld removal in aluminum extrusions.

  • Open Access

    Bayesian model selection for network discrimination and risk‐informed decision‐making in material flow analysis

    by Jiankan Liao, Sidi Deng, Xun Huan, Daniel Cooper

    Material flow analyses (MFAs) provide insight into supply chain‐level opportunities for resource efficiency. MFAs can be represented as networks with nodes that represent materials, processes, sectors, or locations. MFA network structure uncertainty (i.e., the existence or absence of flows between nodes) is pervasive and can undermine the reliability of the flow predictions. This article investigates MFA network structure uncertainty by proposing candidate node‐and‐flow structures and using Bayesian model selection to identify the most suitable structures and Bayesian model averaging to quantify the parametric mass flow uncertainty. The results of this holistic approach to MFA uncertainty are used in conjunction with the input‐output (I/O) method to make risk‐informed resource efficiency recommendations. These techniques are demonstrated using a case study on the US steel sector where 16 candidate structures are considered. The model selection highlights two networks as most probable based on data collected from the United States Geological Survey and the World Steel Association. Using the I/O method, we then show that the construction sector accounts for the greatest mean share of domestic US steel industry emissions while the automotive and steel products sectors have the highest mean emissions per unit of steel used in the end‐use sectors. The uncertainty in the results is used to analyze which end‐use sector should be the focus of demand reduction efforts under different appetites for risk. This article's methods generate holistic and transparent MFA uncertainty that accounts for structural uncertainty, enabling decisions whose outcomes are more robust to the uncertainty.


  • Open Access

    Intelligent data collection for network discrimination in material flow analysis using Bayesian optimal experimental design

    by Jiankan Liao, Xun Huan, Daniel Cooper

    Material flow analyses (MFAs) are powerful tools for highlighting resource efficiency opportunities in supply chains. MFAs are often represented as directed graphs, with nodes denoting processes and edges representing mass flows. However, network structure uncertainty -- uncertainty in the presence or absence of flows between nodes -- is common and can compromise flow predictions. While collection of more MFA data can reduce network structure uncertainty, an intelligent data acquisition strategy is crucial to optimize the resources (person-hours and money spent on collecting and purchasing data) invested in constructing an MFA. In this study, we apply Bayesian optimal experimental design (BOED), based on the Kullback-Leibler divergence, to efficiently target high-utility MFA data -- data that minimizes network structure uncertainty. We introduce a new method with reduced bias for estimating expected utility, demonstrating its superior accuracy over traditional approaches. We illustrate these advances with a case study on the U.S. steel sector MFA, where the expected utility of collecting specific single pieces of steel mass flow data aligns with the actual reduction in network structure uncertainty achieved by collecting said data from the United States Geological Survey and the World Steel Association. The results highlight that the optimal MFA data to collect depends on the total amount of data being gathered, making it sensitive to the scale of the data collection effort. Overall, our methods support intelligent data acquisition strategies, accelerating uncertainty reduction in MFAs and enhancing their utility for impact quantification and informed decision-making.