David DiCarlo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
David DiCarlo has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
B. Aminzadeh
Department of Petroleum and Geosystems Engineering, University of Texas at Austin, Austin, Texas, USA
5 shared publications- Peter B. Flemings
Institute for Geophysics Jackson School of Geosciences The University of Texas at Austin Austin TX USA
5 shared publications H. Dehghanpour
University of Texas at Austin
4 shared publications- Hailun Ni
Bureau of Economic Geology, Jackson School of Geosciences, The University of Texas at Austin, Austin, Texas, USA
3 shared publications - Jose Eduardo Ubillus
University of Texas at Austin
3 shared publications Peter B. Flemings
Jackson School of Geosciences, The University of Texas at Austin, Austin, USA
3 shared publications
Latest Publications
- Open Access
- 3 September 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (17)
Buoyancy‐Driven Flow at Reservoir Conditions
Quantifying the transition between viscous‐ and buoyancy‐dominated flow during injection is essential for predicting plume migration and evaluating storage efficiency in saline aquifers. While previous studies have examined the interaction of viscous, gravitational, and capillary forces, the precise definition of buoyancy‐dominated flow remains unclear. In this study, we use fractional‐flow theory to show that there is a transition in the flow profiles below a threshold flow rate. Below the threshold flow rate, the saturation profile is only a shock with no spreading wave—we posit that this is the signature for buoyancy‐dominated flow. We perform high‐pressure CT core‐flood experiments and find that at high flow rates there is a spreading wave, and at low flow rates there is little or no spreading wave. These findings establish a quantitative threshold for the transition between flow regimes and provide a robust framework for scaling laboratory –brine displacements to field‐scale storage systems.
- 3 September 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (17)
Open AccessBuoyancy‐Driven Flow at Reservoir Conditions
Quantifying the transition between viscous‐ and buoyancy‐dominated flow during injection is essential for predicting plume migration and evaluating storage efficiency in saline aquifers. While previous studies have examined the interaction of viscous, gravitational, and capillary forces, the precise definition of buoyancy‐dominated flow remains unclear. In this study, we use fractional‐flow theory to show that there is a transition in the flow profiles below a threshold flow rate. Below the threshold flow rate, the saturation profile is only a shock with no spreading wave—we posit that this is the signature for buoyancy‐dominated flow. We perform high‐pressure CT core‐flood experiments and find that at high flow rates there is a spreading wave, and at low flow rates there is little or no spreading wave. These findings establish a quantitative threshold for the transition between flow regimes and provide a robust framework for scaling laboratory –brine displacements to field‐scale storage systems.
- Open Access
- 19 August 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (8)
Pore Occupancy of Ice
Ice forms seasonally in mid‐latitude soils, and permanently as permafrost in arctic sediments. Ice blocks some of the pore space, altering the flow of both liquid water and gas. Here, we determine the equilibrium position of ice in a three‐phase ice/water/gas system by minimizing the free energy of the system. We show that ice will occupy the intermediate‐sized pores, and gas will occupy the largest pores. This has implications for (a) determining the flow behavior of water and gas through permafrost from simpler gas/water measurements, (b) determining the capillary pressure of gas and water in the presence of ice, and (c) determining the pressure of ice—a previously unknown variable.
- 19 August 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (8)
Open AccessPore Occupancy of Ice
Ice forms seasonally in mid‐latitude soils, and permanently as permafrost in arctic sediments. Ice blocks some of the pore space, altering the flow of both liquid water and gas. Here, we determine the equilibrium position of ice in a three‐phase ice/water/gas system by minimizing the free energy of the system. We show that ice will occupy the intermediate‐sized pores, and gas will occupy the largest pores. This has implications for (a) determining the flow behavior of water and gas through permafrost from simpler gas/water measurements, (b) determining the capillary pressure of gas and water in the presence of ice, and (c) determining the pressure of ice—a previously unknown variable.
- 7 June 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (24) , 12934-12944
Insights into CO 2 Foam Rheology at HTHP Conditions in Layered Heterogeneous Formations
- 7 June 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (24) , 12934-12944
Insights into CO 2 Foam Rheology at HTHP Conditions in Layered Heterogeneous Formations
- Open Access
- 14 May 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (5)
Gas Permeability of Frozen Sediments: Implications for Modeling Gas and Water Transport in Permafrost
We measure the gas permeability of two permafrost sediments at a range of ice saturations and use van Genuchten‐Mualem equations to model the relative gas ( k rg ) and water ( k rw ) permeabilities of frozen sediments. We show that our frozen sediment k rg data and model display the same functional form as frozen and unfrozen sediment k rg data from literature. Likewise, we show that our frozen sediment k rw model displays the same functional form as unfrozen sediment and hydrate‐bearing sediment k rw data from literature. These results indicate that gas is the least‐wetting phase in frozen and unfrozen sediments and that ice is the intermediate‐wetting phase in frozen sediments. Therefore, k rg and k rw for frozen sediments can be obtained from simpler experiments using unfrozen sediments. Our results give experimental validation for a common approach to model frozen sediment k rg and k rw using unfrozen sediment data. We demonstrate a path to seamlessly model the flow of carbon in the gas and water phases across the 0°C isotherm with a simple form that can be incorporated into large‐scale climate simulations.
- 14 May 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (5)
Open AccessGas Permeability of Frozen Sediments: Implications for Modeling Gas and Water Transport in Permafrost
We measure the gas permeability of two permafrost sediments at a range of ice saturations and use van Genuchten‐Mualem equations to model the relative gas ( k rg ) and water ( k rw ) permeabilities of frozen sediments. We show that our frozen sediment k rg data and model display the same functional form as frozen and unfrozen sediment k rg data from literature. Likewise, we show that our frozen sediment k rw model displays the same functional form as unfrozen sediment and hydrate‐bearing sediment k rw data from literature. These results indicate that gas is the least‐wetting phase in frozen and unfrozen sediments and that ice is the intermediate‐wetting phase in frozen sediments. Therefore, k rg and k rw for frozen sediments can be obtained from simpler experiments using unfrozen sediments. Our results give experimental validation for a common approach to model frozen sediment k rg and k rw using unfrozen sediment data. We demonstrate a path to seamlessly model the flow of carbon in the gas and water phases across the 0°C isotherm with a simple form that can be incorporated into large‐scale climate simulations.
- Open Access
- 13 February 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (2)
Dissolution and Flow Channeling in Hydrate‐Bearing Sediments: Implications for Permeability
Estimates of in situ effective permeability of hydrate reservoirs are tens to hundreds of times less than most laboratory measurements on natural hydrate‐bearing sediments. The measured permeabilities are high because methane‐free water creates and expands flow channels in the sample during pressure core storage and laboratory testing. We study this process in natural hydrate‐bearing sediments retrieved from the deep‐water Gulf of Mexico. During a 90‐day methane‐free water flow experiment, the effluent methane concentration decreases from the equilibrium concentration to zero, with the concentration inversely proportional to flow rate. The permeability increases 20‐fold as hydrate saturation decreases from 0.88 to 0. In a second experiment, permeability remains constant when using methane‐saturated water as the permeant, but immediately increases when switching to methane‐free water. We develop a one‐dimensional reaction‐transport model to simulate our observations. Model results indicate that flow channeling is required to explain the data. Dissolution starts at the specimen outer rim during long‐term storage and evolves into a complex geometry during the flow test, leading to high effective permeability. Our interpretation of artificially high measured permeability on natural hydrate sediments is compatible with permeability estimates based on field data, synthetic hydrate samples, and theoretical models. In turn, a more realistic low in situ permeability would limit the ability to produce methane by pressure drawdown and hinder CO 2 injection to form hydrate.
- 13 February 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (2)
Open AccessDissolution and Flow Channeling in Hydrate‐Bearing Sediments: Implications for Permeability
Estimates of in situ effective permeability of hydrate reservoirs are tens to hundreds of times less than most laboratory measurements on natural hydrate‐bearing sediments. The measured permeabilities are high because methane‐free water creates and expands flow channels in the sample during pressure core storage and laboratory testing. We study this process in natural hydrate‐bearing sediments retrieved from the deep‐water Gulf of Mexico. During a 90‐day methane‐free water flow experiment, the effluent methane concentration decreases from the equilibrium concentration to zero, with the concentration inversely proportional to flow rate. The permeability increases 20‐fold as hydrate saturation decreases from 0.88 to 0. In a second experiment, permeability remains constant when using methane‐saturated water as the permeant, but immediately increases when switching to methane‐free water. We develop a one‐dimensional reaction‐transport model to simulate our observations. Model results indicate that flow channeling is required to explain the data. Dissolution starts at the specimen outer rim during long‐term storage and evolves into a complex geometry during the flow test, leading to high effective permeability. Our interpretation of artificially high measured permeability on natural hydrate sediments is compatible with permeability estimates based on field data, synthetic hydrate samples, and theoretical models. In turn, a more realistic low in situ permeability would limit the ability to produce methane by pressure drawdown and hinder CO 2 injection to form hydrate.
- 23 January 2026
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 31 (03) , 2017-2032
Permeability Reduction and Oil Recovery Improvement from In-Situ Precipitation of Calcium Carbonate from Calcium Hydroxide in Heterogeneous Cores
Summary: Conformance control is an important part of improved oil recovery/enhanced oil recovery (EOR) operations to prevent injected fluid from cycling through high-permeability structures. The focus of this paper is on studying in-situ precipitation of calcium carbonate (CaCO3) via reaction between carbon dioxide (CO2) and calcium hydroxide (Ca(OH)2) to block high-permeability structures in coreflood experiments. Two sets of experiments were performed: two-phase experiments with CO2 and brine that primarily measured permeability reduction and three-phase experiments with CO2, brine, and oil that primarily measured improvement in oil recovery in artificially fractured cores. Experiments utilized ~2.9-in.-diameter × 11-in.-length Berea sandstone, Texas Cream limestone, and Indiana limestone outcrop cores, some containing planar artificial fractures. It was found that precipitation was most effective in reducing permeability in dual-permeability (artificially fractured and composite) cores than in single-permeability cores. Significant improvements in oil recovery were observed when precipitation blocked fractures and redirected flow into the oil-filled matrix. Producing oil cut increased from 0–8% to 25–50%. However, precipitation was found to be unstable (dislodged during injection) when higher pressures built up behind it. Additionally, larger fractures required multiple precipitation cycles to be blocked, as the width to bridge the fracture was too much for a single precipitation cycle to overcome. Overall, this conformance control method may be best for reservoirs with narrow natural fractures or thin high-permeability streaks that do not connect directly to production wells.
- 23 January 2026
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 31 (03) , 2017-2032
Permeability Reduction and Oil Recovery Improvement from In-Situ Precipitation of Calcium Carbonate from Calcium Hydroxide in Heterogeneous Cores
Summary: Conformance control is an important part of improved oil recovery/enhanced oil recovery (EOR) operations to prevent injected fluid from cycling through high-permeability structures. The focus of this paper is on studying in-situ precipitation of calcium carbonate (CaCO3) via reaction between carbon dioxide (CO2) and calcium hydroxide (Ca(OH)2) to block high-permeability structures in coreflood experiments. Two sets of experiments were performed: two-phase experiments with CO2 and brine that primarily measured permeability reduction and three-phase experiments with CO2, brine, and oil that primarily measured improvement in oil recovery in artificially fractured cores. Experiments utilized ~2.9-in.-diameter × 11-in.-length Berea sandstone, Texas Cream limestone, and Indiana limestone outcrop cores, some containing planar artificial fractures. It was found that precipitation was most effective in reducing permeability in dual-permeability (artificially fractured and composite) cores than in single-permeability cores. Significant improvements in oil recovery were observed when precipitation blocked fractures and redirected flow into the oil-filled matrix. Producing oil cut increased from 0–8% to 25–50%. However, precipitation was found to be unstable (dislodged during injection) when higher pressures built up behind it. Additionally, larger fractures required multiple precipitation cycles to be blocked, as the width to bridge the fracture was too much for a single precipitation cycle to overcome. Overall, this conformance control method may be best for reservoirs with narrow natural fractures or thin high-permeability streaks that do not connect directly to production wells.
- 13 November 2025
- Published by Springer Nature in Transport in Porous Media
- Vol. 152 (12) , 115
Gas and Water Relative Permeability in Hydrate Systems
- 13 November 2025
- Published by Springer Nature in Transport in Porous Media
- Vol. 152 (12) , 115
Gas and Water Relative Permeability in Hydrate Systems
- 23 September 2025
- Published by Elsevier in Gas Science and Engineering
- Vol. 145
Coreflooding with sub-core scale characterization for analysis of water encroachment in a gas reservoir
- 23 September 2025
- Published by Elsevier in Gas Science and Engineering
- Vol. 145
Coreflooding with sub-core scale characterization for analysis of water encroachment in a gas reservoir
- 28 May 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (08) , 4894-4907
In-Situ Precipitation of Calcium Carbonate during Carbon Dioxide Injection in Micromodels
Summary: Conformance control is a necessary part of enhanced oil recovery (EOR) operations in heterogeneous oil fields. However, many techniques center on near-wellbore conformance or are not well-suited for low matrix permeability formations. We propose the injection of calcium hydroxide (Ca(OH)2) and carbon dioxide (CO2) as a novel conformance control strategy in reservoirs that experience poor sweep efficiency due to heterogeneity. These two chemical agents react to precipitate solid calcium carbonate (CaCO3), potentially blocking already-swept pores and directing injected fluids to unswept regions of the reservoir. Microfluidic devices (micromodels) were used to perform experiments to observe the fundamental, pore-scale behavior of this reaction in porous media. Precipitation grain size, location, and relative quantity were directly observed while changing injection order, CO2 state, and injection rate. It was found that the reaction took place in porous media for both states of CO2 [gaseous and dissolved in deionized (DI) water]. More precipitate formed during experiments in which gaseous CO2 was used compared with when CO2 was dissolved in water. Overall, precipitation occurred where the reactants both contacted each other and mixed, which did not have a preference for high- or low-permeability zones. Precipitation via this method was controlled through CO2 placement in the reservoir and injection rate, as the reaction only occurred where CO2 and Ca(OH)2 were both present and had sufficient convective mixing. Precipitation was also shown to block pore throats and reduce permeability in 2.5-darcy micromodels. This study is a first look at this novel conformance control process and will be used to develop future core-scale experiments.
- 28 May 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (08) , 4894-4907
In-Situ Precipitation of Calcium Carbonate during Carbon Dioxide Injection in Micromodels
Summary: Conformance control is a necessary part of enhanced oil recovery (EOR) operations in heterogeneous oil fields. However, many techniques center on near-wellbore conformance or are not well-suited for low matrix permeability formations. We propose the injection of calcium hydroxide (Ca(OH)2) and carbon dioxide (CO2) as a novel conformance control strategy in reservoirs that experience poor sweep efficiency due to heterogeneity. These two chemical agents react to precipitate solid calcium carbonate (CaCO3), potentially blocking already-swept pores and directing injected fluids to unswept regions of the reservoir. Microfluidic devices (micromodels) were used to perform experiments to observe the fundamental, pore-scale behavior of this reaction in porous media. Precipitation grain size, location, and relative quantity were directly observed while changing injection order, CO2 state, and injection rate. It was found that the reaction took place in porous media for both states of CO2 [gaseous and dissolved in deionized (DI) water]. More precipitate formed during experiments in which gaseous CO2 was used compared with when CO2 was dissolved in water. Overall, precipitation occurred where the reactants both contacted each other and mixed, which did not have a preference for high- or low-permeability zones. Precipitation via this method was controlled through CO2 placement in the reservoir and injection rate, as the reaction only occurred where CO2 and Ca(OH)2 were both present and had sufficient convective mixing. Precipitation was also shown to block pore throats and reduce permeability in 2.5-darcy micromodels. This study is a first look at this novel conformance control process and will be used to develop future core-scale experiments.