HAHosiberto Batista de Sant’ Ana

Hosiberto Batista de Sant’ Ana

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hosiberto Batista de Sant’ Ana has a total of 221 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Assessment of Group Contribution Models for Estimating the Isobaric Heat Capacity of Ionic Liquids

    by Peterson Y. G. de Medeiros AraújO, Nathan S. Evangelista, Frederico R. Do Carmo, Filipe X. Feitosa, Hosiberto B. de Sant’ANa

    Eight widely used group-contribution models were evaluated for their ability to estimate the isobaric heat capacity (Cp) of ionic liquids (ILs). A curated database containing 9037 experimental data points for 142 ILs, covering eight cation families, temperatures from 190 to 524.87 K, and heat capacities from 93.0 to 1805.7 J·mol–1·K–1, was assembled to assess model performance under diverse conditions. Three main evaluation criteria were applied: predictive accuracy, functional-group flexibility, and ability to represent structural diversity of cation–anion combinations. Among the evaluated models, “GAR”, “SOR”, and “MIA” exhibited the best predictive accuracy, with overall % AARD values of 5.10%, 4.30%, and 4.22%, respectively. The “MIA” model is particularly suitable for imidazolium- and pyridinium-based ILs, relevant in industrial contexts. The “SAT” model also proved promising for CAMD applications due to its flexible atomic-contribution framework. Overall, the study offers practical guidance for selecting group-contribution methods when experimental data are unavailable.

  • Effect of methanol addition as a co-solvent with glycols: a deep volumetric behavior study

    by Vinicius de Oliveira Souza, Moacir Frutuoso Leal da Costa, Davi Cezar Do Nascimento, Filipe Xavier Feitosa, Hosiberto Batista de Sant’ANa

  • Open Access

    Sustainable CuIn Electrodeposition from Deep Eutectic Solvents: Influence of Ethylene Glycol and Urea

    by David A. de Assis, José W. A. CrisósTomo, Ana A. C. Alcanfor, Othon S. Campos, Luciana Vieira, Filipe X. Feitosa, Hosiberto B. de Sant’ANa, Diego F. Dias, Edipo S. de Oliveira, Hamilton F. G. de Abreu, et al.

    The electrodeposition of CuIn coatings on platinum was investigated using CuCl2.2H2O and InCl3 in the deep eutectic solvents (DES) 1ChCl:2EG (1 choline chloride: 2 ethylene glycol) and 1ChCl:2U (1 choline chloride: 2 urea). The cyclic voltammograms of the CuIn solution showed three reduction processes: the first two associated with Cu2+/Cu+ and Cu+/Cu and the third with In3+/In. Physicochemical properties, such as viscosity and specific mass, were measured at different temperatures for Cu2+ and In3+ cations. Increasing the temperature reduced viscosity and increased diffusion coefficient (D) values for the species studied in both solvents. The solvadynamic radius values decreased with increasing temperature for both species in 1ChCl:2EG, whereas the opposite was observed in 1ChCl:2U. Scanning electron microscopy (SEM) analysis of the coatings was performed potentiostatically at different temperatures and cation ratios. For 1ChCl:2EG, granular morphologies were observed, and the grain size increased with increasing temperature. By altering the In3+ concentration in the solution, an increase of approximately 20 wt % in the coatings was achieved. This was followed in relation to the result obtained from the equimolar solution. 1ChCl:2U coatings exhibited a granular morphology with Cu at 100 wt % at 296 K, whereas at 343 K, at more negative potentials, they exhibited 45 wt %. By altering the cation ratio, the cation with a higher concentration in the electrolytic solution predominated. The results show that examining CuIn electrodeposition in different media is essential to producing high-quality coatings.

  • Temperature Effect on Density and Viscosity of 2-(Methylamino)ethanol or Monoethanolamine + Diethylene or Triethylene Glycol Binary Mixtures

    by LetícIa T. Fontenele, Hugo A. D. Medeiros, Vitor J. Policarpo, Francisco M. T. P. Filho, Filipe X. Feitosa, Hosiberto B. de Sant’ANa

    The development of hybrid solvents represents a promising strategy for optimizing CO2 capture processes by mitigating the high-energy requirements of conventional solvents. In this context, accurate data on the thermodynamic properties of water-lean solvent mixtures are valuable from both academic and industrial perspectives. This work presents experimental density and viscosity data for binary mixtures containing alkanolamines (monoethanolamine and 2-(methylamino)-ethanol) and glycols (diethylene glycol and triethylene glycol) over the temperature range T = (293.15–353.15) K at atmospheric pressure. Furthermore, based on these experimental findings, excess molar volume, viscosity deviation, and isobaric thermal expansion coefficient were calculated. The results indicate strong intermolecular interactions, attributed to hydrogen bonding between amines and hydroxyl groups in the alkanolamines and hydroxyl groups in the glycols. These data provide a fundamental thermodynamic basis for the design and modeling of carbon capture processes using nonaqueous solvents.


  • Open Access

    Assessment of Corrosion Product Formation (Iron Oxides and Oxyhydroxides) on Carbon Steel in Saline Media Containing Protic Ionic Liquids by Advanced Structural and Microstructural Characterization

    by Caio Victor Pascoal, Daniel de Castro Girão, Bruno Gomes Linhares, Samuel Lucas Santos Medeiros, Regiane Silva Pinheiro, Seyed Ali Razavi, Mohammad Rezayat, Igor Frota de Vasconcelos, Hosiberto Batista de Sant’Ana, Gemma Fargas, et al.

    This study investigates protic ionic liquids (PILs) as corrosion inhibitors for carbon steel in a saline environment, focusing on their influence on the formation and stability of corrosion products during exposure. By examining corrosion product evolution under inhibited conditions, this work provides a mechanistic perspective beyond conventional inhibition efficiency, evaluating whether the resulting corrosion layers can act as a protective barrier during prolonged exposure. X-ray diffraction, Mossbauer, and Raman spectroscopy techniques were applied to characterize the surface and corrosion product. Moreover, optical and scanning electron microscopy techniques (SEM−ED and FIB− SEM) were selected to identify the oxides/oxyhydroxides externally. At the same time, X-ray spectrometers with energy dispersion were used to analyze the elemental composition, mainly O, Fe, N, Cl, and Na. Fundamentally, this preliminary investigation seeks to identify corrosion products (iron oxides/oxyhydroxides), including lepidocrocite, magnetite, and goethite, elucidate their formation mechanisms, and contribute a novel perspective to the corrosion inhibitor literature. In particular, the study focuses on the interaction between carbon steel and Protic Ionic Liquids (PILs), exploring their potential influence on the formation and evolution of distinct oxide phases on the material’s surface. As a key distinguishing feature, the addition of the corrosion inhibitors PILs (2- HEAF) and (2-HDEAF) revealed the presence of a dense and compact goethite, a phase that can aid in blocking chloride penetration, potentially extending the longevity of carbon steel in saline environments. This observation supports the efficacy of these inhibitors, as previously demonstrated in electrochemical and weight-loss experiments, suggesting their potential for long-term corrosion protection.

  • Open Access

    Paving the Way for Understanding the Binding and Molecular Aspects of PEG 400 + Propane-1,2,3-triol (Glycerol) Binary Mixtures at Different Temperatures through Their Thermophysical, Thermodynamic, and Theoretical Properties

    by Brenda Freires Ferreira, Matheus Teixeira Dias, Hugo Andersson Dantas Medeiros, Marcus Vinicius Fernandes Rodrigues, Norberto de Kássio Vieira Monteiro, Hosiberto Batista de Sant’ Ana, Francisco Avelino

    The study of thermodynamic properties provides insight into the behavior of liquid mixtures. This work investigates the thermophysical and volumetric properties, as well as the excess activation of viscous flow properties of poly(ethylene glycol) 400 (PEG 400) + glycerol solutions at different compositions (xPEG400 = 0.0–1.0, ΔxPEG400 ≈ 0.2) and temperatures (298.15–373.15 K) under atmospheric pressure (0.1 MPa). Absolute density (ρ), dynamic viscosity (η), activation energy for viscous flow (Ea‡), and thermal expansivity (α) were determined, together with the excess molar viscous flow properties such as ΔGm‡,E, ΔSm‡,E, ΔHm‡,E, and excess molar volume (VmE). Molecular dynamics simulations were employed to obtain the density, kinematic viscosity (ν), thermal expansivity, and average hydrogen bond numbers, while intermolecular interactions were analyzed using noncovalent interaction (NCI) analysis based on the reduced density gradient. The results indicate that PEG 400 concentration and temperature affect viscosity and related thermodynamic properties, mainly associated with changes in the hydrogen bonding between PEG and glycerol. Increasing temperature weakened these interactions, leading to lower viscosities and activation energies. Theoretical results followed trends consistent with experimental observations.

  • Open Access

    High-pressure phase behavior and asymmetry effects in the CO2 + butylcyclohexane + o-terphenyl and CO2 + bicyclohexyl + o-terphenyl ternary systems

    by Willam Paul Trujillo Vera, David Matheus de Oliveira Rolim, Hugo Andersson Dantas Medeiros, Filipe Xavier Feitosa, Hosiberto Batista de Sant’ANa

  • A Combined Experimental and PC-SAFT Modeling Investigation on the High-Pressure Density of Ionic Liquids with CO 2

    by Lucas H. G. de Medeiros, Moacir F. L. da Costa, Jean-Patrick Bazile, Filipe X. Feitosa, Hosiberto B. de Sant’ANa, Jean-Luc Daridon


  • Open Access

    Understanding the Role of Diethanolamine-Based Protic Ionic Liquids in Corrosion Inhibition: Electrochemical and Surface Characterization of Carbon Steel in Saline Environments

    by Caio Victor Pereira Pascoal, Mauro Andres Cerra Florez, Francisco Carlos Carneiro Soares Salomão, Eduardo Bedê Barros, Regiane Silva Pinheiro, Mohammad Rezayat, Gemma Fargas, Hosiberto Batista de Sant’aNa, Walney Silva Araújo

    This study presents an evaluation of the corrosion inhibition behavior of three protic ionic liquids (PILs), 2-hydroxy diethanolamine formate (PIL A: 2-HDEAF), 2-hydroxy diethanolamine propionate (PIL B: 2-HDEAP), and 2-hydroxy diethanolamine pentanoate (PIL C: 2-HDEAPe), on A36 carbon steel in a chloride electrolyte (3.5 wt % NaCl). The emphasis was converged on elucidating interfacial adsorption, film formation, and surface chemistry that reinforce inhibitor efficacy. A complementary set of electrochemical and surface techniques, including weight loss measurements, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), optical microscopy, field-emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM), was employed to evaluate the electrochemical response and characterize the inhibitor-modified steel surfaces. X-ray diffraction (XRD) was used to perform an identification of the main phases of corrosion products and adsorbed films. The adsorption behavior was quantitatively evaluated using several adsorption isotherm models, including Langmuir, Temkin, and Freundlich. Among them, the Frumkin isotherm provided the best description of the experimental data, yielding an average standard free energy of adsorption (ΔG°ad) of -20.89 kJ mol-1, which is indicative of predominantly physical adsorption at the steel/electrolyte interface. Among the PILs studied, PIL A exhibited the highest inhibition efficiency (>75%) and promoted the formation of a dense, protective interfacial film, whereas PILs B and C showed progressively lower performance. Inhibition efficiency correlated positively with inhibitor concentration and followed the trend PIL A > PIL B > PIL C. Surface morphologies demonstrated significant mitigation of chloride damage in the presence of PILs, consistent with electrochemical results. XRD analysis revealed the stabilization of surface films (iron oxides and oxyhydroxides), including goethite, which are indicative of altered interfacial reactions in the inhibited systems. These results accentuate the importance of interfacial adsorption evaluation and film formation mechanisms in governing corrosion inhibition performance, highlighting the potential of tailored PILs for surface protection in chloride-containing media.


  • Experimental measurement and thermodynamic modeling for the methane + methanol binary system: volumetric behavior and Joule-Thomson coefficient modeling

    by Moacir Frutuoso Leal da Costa, Lucas Henrique Gomes de Medeiros, Davi Cezar Do Nascimento, Vinicius de Oliveira Souza, Filipe Xavier Feitosa, Hosiberto Batista de Sant’aNa