INIvan P. Nevirkovets

Ivan P. Nevirkovets

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ivan P. Nevirkovets has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Edge-localized supercurrent transport in Josephson junctions with Al/Ni multilayer barriers

    by Ivan P Nevirkovets, Mikhail Belogolovskii, John B Ketterson

    The survival and reorganization of supercurrents in strongly scattering media remains a fundamental question at the intersection of condensed matter physics and quantum transport. We investigate the propagation of superconducting correlations in metallic multilayers consisting of alternating nanometre-thick Al and Ni layers. Earlier investigations we conducted on Josephson junctions (JJs) containing (Al/Ni) n multilayers demonstrated SQUID-like magnetic interference patterns, suggesting supercurrent localization at the device edges despite the diffusive nature of the metallic weak link. This work reports the results of a study demonstrating that the characteristics of devices incorporating Al/Ni multilayers are markedly influenced by differing boundary conditions along their sidewalls. Specifically, we consider junctions fabricated using three sidewall insulation methods: (i) anodization only, (ii) a combination of anodization and SiO 2 deposition, and (iii) SiO 2 deposition only. Solely devices fabricated using anodization exhibited oscillatory interference patterns. Further, to distinguish between intrinsic quantum-coherent edge states and trivial surface shunting mechanisms, we fabricated hybrid Josephson devices in which a standard Nb/Al/AlO x /Al/Nb tunnel junction was either embedded in or connected in series with Al/Ni multilayer structure. Unlike pure multilayer junctions, these hybrid devices exhibited conventional Fraunhofer-type interference patterns, indicating that charge carriers, after passing the edges of the multilayer structure, are redistributed deep into the bulk of the adjacent superconducting electrode. The obtained results are consistent with a strongly edge-weighted supercurrent distribution in Al/Ni multilayer JJs. Although the microscopic origin of this boundary-dominated transport remains unresolved and requires further study, these structures provide a useful platform for investigating how superconducting correlations propagate in strongly scattering magnetic multilayers.

  • Characteristics of Nb-Based Josephson Junctions With TaN x and TaN x /(Pd-Ni) Barriers

    by Ivan P. Nevirkovets

    Self-shunted, high-jc Josephson junctions are required for the development of high-density integrated circuits of superconducting electronics. For this purpose, various electrode and barrier materials have been considered by researchers. Here, fabrication and electrical characterization of Nb/TaNx/Nb Josephson junctions is reported. At the thickness of TaNx layer of about 10 nm, the junctions are self-shunted and display the critical current density, jc, above 100 kA/cm2, and the effective critical voltage, V′c, of about 0.68 mV at 4.2 K. The devices with jc = 67 kA/cm2 and V′c = 0.96 mV are also fabricated. The effective critical voltage is defined as V′c = IcRq, where Ic is the Josephson critical current and Rq is the resistance of the quasiparticle branch of the current-voltage characteristic at the level of maximum Ic. In addition, Nb-based junctions with a composite TaNx/(Pd-Ni) barrier were fabricated and characterized. The thickness of TaNx was fixed while the thickness of Pd-Ni was varied. As a result, the characteristic voltage Vc = IcRN (where RN is the normal-state resistance of the junction) initially decreased, but then increased with the thickness of Pd-Ni, indicating the transition to the π state. For some value of the thickness of Pd-Ni, the diode effect was observed. It is suggested that the junctions are promising for applications in superconducting electronics including single-flux quantum digital and quantum computing circuits.

  • Fabrication and Characteristics of Self-Shunted Nb/TaN x /Nb Josephson Junctions

    by Ivan P. Nevirkovets

    Fabrication and electrical characterization of Nb/TaNx/Nb Josephson junctions is reported. At the thickness of TaNx layer of about 10 nm, the junctions are self-shunted and display the critical current density, jc, above 100 kA/cm2, and an effective critical voltage, V′c, of about 0.59 mV at 4.2 K. The effective critical voltage is defined as V′c = IcRq, where Ic is the Josephson critical current and Rq is the resistance of the quasiparticle branch of the current–voltage characteristic at the level of maximum Ic. The value of Rq may be different from the junction's normal state resistance, RN. It is suggested that the junctions are promising for applications in superconducting electronics including single-flux quantum digital and quantum computing circuits.

  • Hybrid Nb/MoGe Josephson Junctions for the Development of Flux-Flow-Type Josephson Oscillators

    by Ivan P. Nevirkovets

    Josephson junctions (JJs) with layered Nb/MoGe electrodes were fabricated and characterized at 4.2 K. Mo0.75Ge0.25 is known to be a superconductor with the transition temperature of up to 7.4 K. It is essentially an amorphous material that has very uniform and smooth surface in thin-film form. This allowed us to fabricate high-quality all-MoGe Josephson junctions with very thin Al overlayer to form AlOx barrier [Supercond. Sci. Technol., vol. 35, Article no. 035008, 2022]. Here we report JJs with composite Nb/MoGe electrodes aiming at development of flux-flow-type Josephson oscillators operating at low frequencies suitable for qubit control. Using MoGe allows one to preserve a large effective magnetic penetration depth and a high kinetic inductance of the electrodes, which results in (i) a standing wave (Fiske) resonance to occur at lower frequencies, and (ii) in a higher impedance of the oscillator; the latter is important for matching it with other elements of the superconducting circuit. At the same time, using Nb as a part of the composite electrode allows one to maintain the critical parameters (critical current and voltage) of the JJ close to those of the Nb-based JJs. In addition, damping in hybrid Nb/MoGe JJs is lower than that in all-MoGe JJs, which results in a higher current of flux-flow steps, and potentially, in a higher microwave emission power.

  • Investigation of the Critical Currents in Thin-Film MoGe Devices

    by Ivan P. Nevirkovets, Scott T. Grudichak, Mikhail Belogolovskii, John B. Ketterson

    We report on flux-flow properties of 50 nm thick thin-film amorphous MoGe bridges of different sizes with and without patterned sub-micron holes with different diameters and spacings. Characterization of the devices was carried out in liquid He at 4.2 K in a magnetic field, H , applied perpendicular to the device plane. Two critical currents, I c1 and I c2 , were studied. The current I c1 is identified as the onset of a resistive state, whereas I c2 is the current at which the device switches to the normal state, and the corresponding dependences I c1 ( H ) and I c2 ( H ) were determined. In the absence of the holes, I c1 decreases monotonically with H , whereas I c2 ( H ) manifests lobes resembling those in the Fraunhofer-like pattern characteristic of Josephson junctions. This behavior may be due to formation of an ordered vortex lattice in some current and field ranges. Introducing the hole-line arrays modifies both I c1 ( H ) and I c2 ( H ) in a way that is most complicated for larger hole diameters.


  • Open Access

    Electrically controlled hybrid superconductor–ferromagnet cell for high density cryogenic memory

    by I. P. Nevirkovets, O. A. Mukhanov

    We report the fabrication and testing, at 4.2 K, of an S1IS2FS3 device, where S, F, and I denote a superconductor (Nb), a ferromagnetic material (Permalloy), and an insulator (AlOx), respectively. The F layer covers about one half of the top electrode of the S1IS2 Josephson junction and is positioned off-center. Electric current, Itr, along the S3 electrode can change the magnetization of the F layer in such a way that, for one direction of Itr, a magnetic flux penetrates the junction perpendicular to the layers, whereas for the opposite direction, the perpendicular magnetic flux can be removed. In the former state, the modulation pattern of the Josephson critical current, Ic, in the magnetic field, H, may acquire minimum near H = 0 and restores its usual shape with maximum in the second state. These states can be used for building a compact cryogenic memory compatible with single flux quantum electronics.


  • Observation of fractional vortices and π phases in Josephson junctions involving periodic magnetic layers

    by I. P. Nevirkovets

    Characteristics of SN(F/N)nIN(F/N)mS Josephson junctions with n,m=1 to 3 are reported. Here, S is a superconductor (Nb), F is a magnetic material (nickel), N is a nonmagnetic metal (aluminum), and I is an insulator (Al/AlOx). The devices with n=m=1 and n=1,m=2 display critical current versus magnetic field [Ic(H)] dependences that imply the appearance of fractional magnetic vortices in the junction, corresponding to a half of the flux quantum. Stochastic switching between the two half-vortex polarities with emission of an integer vortex was observed. In the devices with n=m=3, a typical Ic(H) dependence consists of a background current with a large modulation period, and a Fraunhofer-like pattern with a small modulation period on top of the background current. The Fraunhofer-like pattern may be completely or partially inverted; in these states, there is a component of the Josephson current flowing against the bias current, indicating the presence of the π phase in the junction. The experiments give evidence that switching between the zero and π states can, potentially, be magnetically controlled.


  • Characterization of Lateral Junctions and Micro-SQUIDs Involving Magnetic Multilayers

    by Halima Giovanna Ahmad, Luigi Di Palma, Davide Massarotti, Marco Arzeo, Giovanni Piero Pepe, Francesco Tafuri, Oleg A. Mukhanov, Ivan P. Nevirkovets

    We have fabricated and characterized at low temperatures Nb/Ni/(Al/Ni) 14 /Nb lateral junctions and Nb micro-SQUIDs involving (Al/Py) 10 multilayers (here Py is permalloy: 80% Ni − 20% Fe). We have studied I - V curves and Josephson critical current as a function of an external magnetic field ( I c ( H )) at various temperatures and orientations of the applied magnetic field. These studies revealed that, for some orientations of the externally applied magnetic field, the I c ( H ) dependence of the lateral junctions has a component highly sensitive to magnetic field. In addition, we have observed a SQUID-like I c ( H ) dependence for devices, in which an orthogonally oriented (with respect to the substrate) Nb loop that includes two nanoscopic Josephson junctions is filled with a (Al/Py) 10 multilayer. We believe the devices presented here are promising as magnetic field sensors on nanoscale for various applications where high spatial resolution is required.


  • Josephson Oscillators Based on Amorphous Superconductors

    by I. P. Nevirkovets, J. B. Ketterson

    Thin films of amorphous Mo x Ge 1- x grown with magnetron sputtering are known to exhibit excellent homogeneity and fairly high superconducting transition temperatures (up to 7.5 K). These properties make MoGe thin films suitable to form high-quality tunnel junctions, as demonstrated recently by our group [see Supercond. Sci. Technol. 35, 035008 (2022)]. Here, we report the experimental demonstration of an MoGe/Al/AlO x /(Al)MoGe Josephson oscillator based on amorphous superconductor MoGe, which allows for continuous tuning of the oscillation frequency from about 1 GHz up to tens of GHz. We believe such an oscillator may be useful as a compact on-chip microwave source suitable to control some types of qubits based on Josephson junctions.


  • Magnetic Field Sensor Based on a Single Josephson Junction With a Multilayer Ferromagnet/Normal Metal Barrier

    by Ivan P. Nevirkovets, Mikhail A. Belogolovskii, Oleg A. Mukhanov, John B. Ketterson

    We report experimental studies of quantum-matter heterostructures based on a ferromagnet/normal metal multilayer proximitized by Nb superconducting electrodes to form a novel Josephson weak-link device that is highly sensitive to magnetic fields. The device is a single Josephson junction containing Al/Ni or Al/Py (Py: Ni 80 Fe 20 ) multilayer structures, which manifests quasi-sinusoidal critical current oscillations resembling the response of a dc Superconducting Quantum Interference Device (SQUID). Our analysis shows that the field sensitivity of this novel device, as measured by the magnetic field needed to form one period of the oscillations, is about twice that reported for recent micro- or nano-SQUIDs. We present an analysis of the temperature dependence of the period of the oscillations and the Josephson critical current, as well as the background current. We believe that our devices are promising candidates for a new generation of magnetic field nanosensors.