Bin Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bin Zhang has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
Jian Han
Zhejiang Provincial Key Lab. of Industrial Textile Materials & Manufacturing Technology, College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou, China
14 shared publicationsYujie Jiang
Zhejiang Provincial Key Lab.of Industrial Textile Materials & Manufacturing Technology, College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou, China
12 shared publicationsHong Liu
Zhejiang Sci Tech Univ, Coll Mat & Text, Hangzhou 310018, Zhejiang, Peoples R China
5 shared publications- Jian Han
College of Textiles Science and Engineering Zhejiang Sci‐Tech University Hangzhou People's Republic of China
4 shared publications Shaohua Zeng
School of Chemistry & Chemical Engineering, Anhui University Anhui People's Republic of China
2 shared publications- Hong Liu
Jiangsu Key Laboratory of Fire Safety in Urban Underground Space, China University of Mining and Technology, Xuzhou 221116, China
1 shared publication
Latest Publications
- 4 May 2024
- Published by Wiley in Fire and Materials
- Vol. 48 (6) , 657-667
Improving the flame retardancy and smoke suppression of flexible PVC by incorporating zinc borate‐modified diantimony trioxide
The properties and structure of flexible PVC by incorporating zinc borate (ZB)‐modified diantimony trioxide (Sb2O3) were investigated. The results of flame retardancy and smoke suppression testing indicate that there was an obvious maximum Limited oxygen index (LOI) value of PVC/20 wt.% ZB–Sb2O3 composites reached 37.5% and passed the UL 94 V‐0 rating. An obvious synergistic effect between ZB and Sb2O3 was observed by LOI, SDR, and TG. Moreover, remarkable decreases in the smoke density were observed when ZB–Sb2O3 was incorporated into PVC. In addition, the tensile strength and elongation at break of PVC/ZB–Sb2O3 composites was higher than PVC/Sb2O3 composites, and this ameliorative effect was mainly arising from the ZB–Sb2O3 nanoparticles, which reduced the degree of fatal defects on PVC. The addition of ZB and Sb2O3 greatly increased the amount of residual char and apparently improved the mechanical properties of PVC composites. According to scanning electron microscopy photographs of residual char, after thermal decomposition, there were many fragments linked to the condensed phase and the compact char layer. Fourier transform infrared spectroscopy shows the residues char was composed of benzene ring, the flame retardants occurred and the condensed phase with significant interactions.
- 4 May 2024
- Published by Wiley in Fire and Materials
- Vol. 48 (6) , 657-667
Improving the flame retardancy and smoke suppression of flexible PVC by incorporating zinc borate‐modified diantimony trioxide
The properties and structure of flexible PVC by incorporating zinc borate (ZB)‐modified diantimony trioxide (Sb2O3) were investigated. The results of flame retardancy and smoke suppression testing indicate that there was an obvious maximum Limited oxygen index (LOI) value of PVC/20 wt.% ZB–Sb2O3 composites reached 37.5% and passed the UL 94 V‐0 rating. An obvious synergistic effect between ZB and Sb2O3 was observed by LOI, SDR, and TG. Moreover, remarkable decreases in the smoke density were observed when ZB–Sb2O3 was incorporated into PVC. In addition, the tensile strength and elongation at break of PVC/ZB–Sb2O3 composites was higher than PVC/Sb2O3 composites, and this ameliorative effect was mainly arising from the ZB–Sb2O3 nanoparticles, which reduced the degree of fatal defects on PVC. The addition of ZB and Sb2O3 greatly increased the amount of residual char and apparently improved the mechanical properties of PVC composites. According to scanning electron microscopy photographs of residual char, after thermal decomposition, there were many fragments linked to the condensed phase and the compact char layer. Fourier transform infrared spectroscopy shows the residues char was composed of benzene ring, the flame retardants occurred and the condensed phase with significant interactions.
- Open Access
- 19 October 2023
- Published by Springer Nature in Research Square
Improving the flame retardancy and smoke suppression of PVC membrane material by incorporating zinc borate-modified diantimony trioxide
Zinc borate (ZB) based diantimony trioxide(Sb2O3) are environment-friendly flame retardant for flexible PVC membrane material. Also, they usually exhibit high flame retardancy and smoke suppression properties. The maximum LOI value of PVC/20 wt% ZB-Sb2O3 membrane material reached 37.5% and passed the UL 94 V-0 rating. An obvious synergistic effect between ZB and Sb2O3 was observed by LOI, SDR and TG. Moreover, remarkable decreases in the smoke density were observed when ZB-Sb2O3 was incorporated into PVC. The addition of ZB and Sb2O3 greatly increased the amount of residual char and apparently improved the mechanical properties of PVC membrane material. Additionally, the structure and morphology of the residual chars have been studied by FTIR, EDX and SEM. The results illustrated that the flame retardancy of ZB-Sb2O3 was mainly exerted in the condensed phase.
- 19 October 2023
- Published by Springer Nature in Research Square
Open AccessImproving the flame retardancy and smoke suppression of PVC membrane material by incorporating zinc borate-modified diantimony trioxide
Zinc borate (ZB) based diantimony trioxide(Sb2O3) are environment-friendly flame retardant for flexible PVC membrane material. Also, they usually exhibit high flame retardancy and smoke suppression properties. The maximum LOI value of PVC/20 wt% ZB-Sb2O3 membrane material reached 37.5% and passed the UL 94 V-0 rating. An obvious synergistic effect between ZB and Sb2O3 was observed by LOI, SDR and TG. Moreover, remarkable decreases in the smoke density were observed when ZB-Sb2O3 was incorporated into PVC. The addition of ZB and Sb2O3 greatly increased the amount of residual char and apparently improved the mechanical properties of PVC membrane material. Additionally, the structure and morphology of the residual chars have been studied by FTIR, EDX and SEM. The results illustrated that the flame retardancy of ZB-Sb2O3 was mainly exerted in the condensed phase.
- Retraction
- 30 January 2020
- Published by Springer Nature in Fibers and Polymers
- Vol. 21 (1) , 224
Retraction Note: Preparation and UV-protective property of PVAc/ZnO and PVAc/TiO2 microcapsules/poly(lactic acid) nanocomposites
- 30 January 2020
- Published by Springer Nature in Fibers and Polymers
- Vol. 21 (1) , 224
RetractionRetraction Note: Preparation and UV-protective property of PVAc/ZnO and PVAc/TiO2 microcapsules/poly(lactic acid) nanocomposites
- 27 June 2019
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 59 (3) , 339
Improving the Flame Retardancy and Smoke Suppression of Poly(Lactic Acid) with a SiO2@ammonium Molybdate Core-Shell Nanotubes
(2019). Improving the Flame Retardancy and Smoke Suppression of Poly(Lactic Acid) with a SiO2@ammonium Molybdate Core-Shell Nanotubes. Polymer-Plastics Technology and Materials. Ahead of Print.
- 27 June 2019
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 59 (3) , 339
Improving the Flame Retardancy and Smoke Suppression of Poly(Lactic Acid) with a SiO2@ammonium Molybdate Core-Shell Nanotubes
(2019). Improving the Flame Retardancy and Smoke Suppression of Poly(Lactic Acid) with a SiO2@ammonium Molybdate Core-Shell Nanotubes. Polymer-Plastics Technology and Materials. Ahead of Print.
- Open Access
- 6 March 2019
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 14 (3) , 224-229
QGO enhanced PET fibre for multi‐applications
Graphene oxide (GO) is grafted to chloropropyl trimethoxysilane, then it is grafted from N , N ‐dimethyldodecylamine to prepare a quaternised GO (QGO). The QGO is introduced to polyester (PET) fibre surface by immersion method. The results show that the QGO possesses good dispersibility, antibacterial activity and durability, the antibacterial rate of QGO‐modified PET fibre against Staphylococcus aureus , Escherichia Coli and Bacillus subtilis are 99.5, 99.5 and 99.8%, respectively. In addition, the QGO‐modified PET fibre shows a good chemical stability and corrosive resistance. It is convenient for preparing wearable textiles.
- 6 March 2019
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 14 (3) , 224-229
Open AccessQGO enhanced PET fibre for multi‐applications
Graphene oxide (GO) is grafted to chloropropyl trimethoxysilane, then it is grafted from N , N ‐dimethyldodecylamine to prepare a quaternised GO (QGO). The QGO is introduced to polyester (PET) fibre surface by immersion method. The results show that the QGO possesses good dispersibility, antibacterial activity and durability, the antibacterial rate of QGO‐modified PET fibre against Staphylococcus aureus , Escherichia Coli and Bacillus subtilis are 99.5, 99.5 and 99.8%, respectively. In addition, the QGO‐modified PET fibre shows a good chemical stability and corrosive resistance. It is convenient for preparing wearable textiles.
- Open Access
- 28 January 2019
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 30 (3) , 3166-3167
Correction to: Highly electrically conductive and smart fire-resistant coating
- 28 January 2019
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 30 (3) , 3166-3167
Open AccessCorrection to: Highly electrically conductive and smart fire-resistant coating
- Open Access
- 1 November 2018
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 13 (11) , 1615-1620
Simultaneous reinforcing and toughening of PTFE/glass fabric composites based on polyaniline/carbon microcapsule network
Through designing dispersed well and assembled orderly structures, a series of polyaniline (PANI)/carbon (CB) microcapsules were successfully synthesised. In the formation of the PANI/CB microcapsules, PANI/CB microcapsules were in good dispersion and ordered state, which resulted in exceptional mechanical properties and electrical conductivity for polytetrafluoroethylene (PTFE)/glass fabric (GF) composites. Here, the authors have developed the PTFE/GF composites that have not only tensile strength up to 21.5 MPa, but also toughness up to 17.5 MJ/m 3 , and surface resistivity up to 5 × 10 8 Ω cm, it is difficult to obtain by other methods. This was achieved by only assembled orderly and ordered arrangement for forming highly ordered network structures in an oriented direction, without introducing a third component or chemical cross‐linker as in interfacial systems. More importantly, they believe that the design principles and processing strategies, which can be applied to other material systems to develop superconducting, strong and flexible materials.
- 1 November 2018
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 13 (11) , 1615-1620
Open AccessSimultaneous reinforcing and toughening of PTFE/glass fabric composites based on polyaniline/carbon microcapsule network
Through designing dispersed well and assembled orderly structures, a series of polyaniline (PANI)/carbon (CB) microcapsules were successfully synthesised. In the formation of the PANI/CB microcapsules, PANI/CB microcapsules were in good dispersion and ordered state, which resulted in exceptional mechanical properties and electrical conductivity for polytetrafluoroethylene (PTFE)/glass fabric (GF) composites. Here, the authors have developed the PTFE/GF composites that have not only tensile strength up to 21.5 MPa, but also toughness up to 17.5 MJ/m 3 , and surface resistivity up to 5 × 10 8 Ω cm, it is difficult to obtain by other methods. This was achieved by only assembled orderly and ordered arrangement for forming highly ordered network structures in an oriented direction, without introducing a third component or chemical cross‐linker as in interfacial systems. More importantly, they believe that the design principles and processing strategies, which can be applied to other material systems to develop superconducting, strong and flexible materials.
- 6 September 2018
- Published by Taylor & Francis in Composite Interfaces
- Vol. 26 (7) , 571-583
Preparation of grephene@waterborne polyurethane microcapsules for improving mechanical and interface properties of aramid fibers/natural rubber composites
The grephene (GE)@waterborne polyurethane (WPU) microcapsule (GE@WPU) is synthesized and introduced GE@WPU microcapsules to aramid fibers (AF) surface. Compare with GE is directly added to WPU solution, the GE@WPU microcapsule suspension is improved significantly. The results show that the tensile strength (19.1 cN/dtex) of modified AF is higher than unmodified AF (17.5 cN/dtex), the elongation at break (1.47%) of modified AF is lower than the unmodified AF (1.51%); the GE@WPU microcapsules can significantly decrease the surface resistivity. Modified AF is introduced into natural rubber (NR), findings indicated that the GE@WPU microcapsule modified AF contribute to enhancing the interfacial adhesion properties of AF/NR composites, the pull-out force of modified AF/NR composites is increased with the content of GE@WPU microcapsules increase, the pull-out force (142 N/cm) of modified AF/NR composites is higher than the unmodified AF/NR composites (64 N/cm). This means that the method can be applied in the fiber-reinforced composites. Graphical Abstract
- 6 September 2018
- Published by Taylor & Francis in Composite Interfaces
- Vol. 26 (7) , 571-583
Preparation of grephene@waterborne polyurethane microcapsules for improving mechanical and interface properties of aramid fibers/natural rubber composites
The grephene (GE)@waterborne polyurethane (WPU) microcapsule (GE@WPU) is synthesized and introduced GE@WPU microcapsules to aramid fibers (AF) surface. Compare with GE is directly added to WPU solution, the GE@WPU microcapsule suspension is improved significantly. The results show that the tensile strength (19.1 cN/dtex) of modified AF is higher than unmodified AF (17.5 cN/dtex), the elongation at break (1.47%) of modified AF is lower than the unmodified AF (1.51%); the GE@WPU microcapsules can significantly decrease the surface resistivity. Modified AF is introduced into natural rubber (NR), findings indicated that the GE@WPU microcapsule modified AF contribute to enhancing the interfacial adhesion properties of AF/NR composites, the pull-out force of modified AF/NR composites is increased with the content of GE@WPU microcapsules increase, the pull-out force (142 N/cm) of modified AF/NR composites is higher than the unmodified AF/NR composites (64 N/cm). This means that the method can be applied in the fiber-reinforced composites. Graphical Abstract