APAlexander Perzylo

Alexander Perzylo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alexander Perzylo has a total of 75 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Flexible Mobile Manipulator Architecture: A Case Study on Plasterboard Wall Preparation

    by Łukasz Granat, Michał Bryła, Kuba Kamiński, Filip JęDrzejczyk, Sławomir Puchalski, Ingmar Kessler, Alexander Perzylo, Ángel Soriano

    Skilled labor shortage and a competitive market are challenges for many businesses. Hence, automation and robotization are well-established in the large-scale, well-structured industrial environments of many factories. Moreover, there is a push for safer and more easily programmable robots, so-called cobots, that would be more suitable for smaller-scale applications. However, the implementation and customization of an overall robot system with different sensors, tools, external systems, etc. for the use cases of in particular small and medium-sized enterprises (SMEs) are still often infeasible. Therefore, this paper describes the design, implementation, and testing of a flexible mobile manipulator architecture with the following three abstraction layers. A high-level semantic layer models and utilizes OWL ontologies of abstract manufacturing processes, specific workcell environments, linked context knowledge, and the current semantic world state. An intermediate translation layer collects and exchanges data from multiple system components via a unified internal database, which is used, e.g., in combination with behavior trees to convert symbolic, high-level actions into multiple numeric, low-level commands, including their parameter values. A low-level control layer is implemented locally on a mobile robot to provide a unified interface of its potentially customized subsystems to the higher layers. This architectural approach facilitates the implementation of new use cases, e.g., by a system integrator, in that, e.g., the ontologies and behavior trees can be adapted on a flexible model level without changing source code. The implemented system was adapted to and deployed in five different real-world use cases of industrial partners during the VOJEXT project. This paper focuses on the plasterboard wall preparation use case from the construction domain as a guiding example, which includes taping, spraying, and sanding operations.

  • Open Access

    Towards Digital Sustainability Reporting: An Ontology for Mapping of Indicators in GRI and ESRS

    by Yuchen Zhou, Yuan Cao, Alexander Perzylo

    Sustainability reporting by Small and Medium Enterprises (SMEs) is gaining importance. SMEs form the backbone of European industries, and their customers rely on them to ensure regulatory compliance. In preparing sustainability reports, a combination of standards is commonly used, which encompasses overlapping yet distinct requirements on sustainability indicators. Different standards categorize shared indicators under varying topics, while they also mandate unique indicators to assess identical sustainability phenomena. This poses challenges for SMEs in reporting against multiple standards. Considerable human efforts are demanded to determine the interconnected requirements across different standards. Additionally, reporting on overlapping indicators for new standards results in significant redundant work. Mapping of indicators between different standards allows the semantic interoperability of standards by indicating matching and distinct requirements, aiding in addressing these challenges. Therefore, this paper focuses on developing an ontology for mapping indicators from two significant standards, GRI and ESRS. We introduce the Sustainability Reporting Standards Ontology (RSO). RSO formally represents environmental indicators in GRI and ESRS, and is available online. Furthermore, we provide an ontology-based mapping between indicators, supported by concrete examples that illustrate the interconnections between them.


  • Open Access

    Soziotechnisches Assistenzsystem zur lernförderlichen Arbeitsgestaltung in der robotergestützten Montage

    by Alin Albu-Schäffer, Norbert Huchler, Ingmar Kessler, Florian Lay, Alexander Perzylo, Michael Seidler, Franz Steinmetz, Roman Weitschat

    Zusammenfassung: Dieser Beitrag der Zeitschrift Gruppe. Interaktion. Organisation. (GIO) widmet sich der lernförderlichen Gestaltung eines roboterbasierten Assistenzsystems für industrielle Montagetätigkeiten. Individualisierte Produkte, kleinere Losgrößen und beschleunigte Prozesse sind Aspekte des digitalen Wandels in der industriellen Fertigung und Teil des Leitbilds einer flexiblen Produktion. Mensch-Roboter-Kollaboration und wissensbasiertes Engineering sind aktuelle Ansätze, um diesen Anforderungen gerecht zu werden. Dieser Artikel stellt an einem Anwendungsbeispiel (Verdrahtung von Schaltschränken) einen ersten Ansatz vor, wie mittels wissensbasierter Technologien (v. a. Ontologien und deren logische Interpretation) Vorschläge zur Arbeitszuteilung zwischen Menschen und Robotern sowohl nach ökonomischen als auch nach Kriterien der humanen Arbeitsgestaltung automatisiert erstellt werden können. Zum einen können für jede Aufgabe ihre Anforderungen mit den individuellen Fähigkeiten und Stärken der Beschäftigten sowie mit denen des kollaborativen Robotersystems in einem Mixed-Skill-Konzept nach betrieblichen Kennziffern (z. B. Zeit, Qualität) abgeglichen werden, um sich so einem optimalen Produktionsablauf anzunähern. Zum anderen können dabei Aspekte einer humanen Gestaltung der Mensch-Maschine-Interaktion (MMI) berücksichtigt werden, die vordringlich mit Blick auf Lernförderlichkeit zusammengeführt werden. Lernförderlichkeit in der MMI setzt Zeit, Handlungsräume und förderliche Inhalte voraus und ist zugleich eine zunehmende Notwendigkeit, um vorausschauend auf den dynamisierten Wandel von Arbeit zu reagieren. Denn gerade mit dem Technikeinsatz ist ein starker Tätigkeitswandel in Richtung Entscheidungsträger und Problemlöser verbunden, der neben Qualifizierung und Weiterbildung auch niedrigschwelliger, arbeitsintegrierter Lerngelegenheiten bedarf. Gerade die kollaborative Robotik als Schlüsseltechnologie der flexiblen Fertigung macht es nötig, neue Konzepte für die Organisation des hybriden Zusammenwirkens von Mensch und Roboter zu entwickeln. Im Folgenden wird aufbauend auf den grundlegenden Ansatz das Konzept eines technischen Demonstrators vorgestellt, welches entlang eines empirischen Fallbeispiels entwickelt wurde. Die prototypische, technische Umsetzung basiert auf einer Arbeitsumgebung mit einem Roboterarm und zugehörigen Werkzeugen, formalen semantischen Beschreibungen der Fähigkeiten und Tätigkeiten von Menschen und Robotern sowie einer intuitiven Benutzeroberfläche, unter anderem für die individuelle Anpassung der generierten Arbeitszuteilungen.


  • Ontology-Based Decision Support System for the Nitrogen Fertilization of Winter Wheat

    by Ingmar Kessler, Alexander Perzylo, Markus Rickert

    Digital technologies are already used in several aspects of agriculture. However, decision-making in crop production is still often a manual process that relies on various heterogeneous data sources. Small-scale farmers and their local consultants are particularly burdened by increasingly complex requirements. Regional circumstances and regulations play an essential role and need to be considered. This paper presents an ontology-based decision support system for the nitrogen fertilization of winter wheat in Bavaria, Germany. Semantic Web and Linked Data technologies were employed to both reuse and model new common semantic structures for interrelated knowledge. Many relevant general and regional data sources from multiple domains were not yet available in RDF. Hence, we used several tools to transform relevant data into corresponding OWL ontologies and combined them in a central knowledge base. The GUI application of the decision support system queries it to parameterize requests to external web services and to show relevant information in an integrated view. It further uses SPARQL queries to automatically generate recommendations for farmers and their consultants.


  • Open Access

    A Generic Plug & Produce System Composed of Semantic OPC UA Skills

    by Stefan Profanter, Alexander Perzylo, Markus Rickert, Alois Knoll

    Typical industrial workcells are composed of a plenitude of devices from various manufacturers, which rely on their own specific control interfaces. To reduce setup and reconfiguration times, a hardware-agnostic Plug & Produce system is required. In this paper, we present a system architecture that uses generic and semantically augmented OPC UA skills for robots, tools, and other system components. Standardized skill interfaces and parameters facilitate flexible component interchange and automatic parametrization with a focus on reusability of skills across different platforms and domains. The hierarchical composition of such skills allows for additional abstraction through the grouping of functionalities. Through the extension of OPC UA discovery services, available skills are dynamically detected whenever a manufacturing system's component is updated. The introduced Plug & Produce system is evaluated in multiple industrial workcells composed of robots, tool changer, electric parallel gripper, and vacuum gripper—all controlled via the proposed OPC UA skill interface. The evaluation of our system architecture demonstrates the applicability of the Plug & Produce concept in the domain of robot-based industrial assembly. Although it is necessary to adapt existing hardware to comply with the semantic skill concept, the initial one-time effort yields reoccurring efficiency gains during system reconfiguration. In particular, small lot production benefits from reduced changeover times.


  • Toward a Knowledge-Based Data Backbone for Seamless Digital Engineering in Smart Factories

    by Alexander Perzylo, Ingmar Kessler, Stefan Profanter, Markus Rickert

    Digital transformation efforts in manufacturing companies bear the potential to reduce product costs and increase the flexibility of production systems. The semantic integration of data and information along the value chain enables the automated interpretation of interrelations between its different aspects such as product design, production process and manufacturing resources. These interrelations can be used to automatically generate semantic process descriptions and execute corresponding robot motions. An initial one-time effort to model the required knowledge of a particular application domain can make the manufacturing of high-variant products in small batches or even lot size one production more efficient.This paper introduces a knowledge-based digital engineering concept to automate engineering and production activities without human involvement. The concept was integrated and evaluated in a physical robot workcell where automotive fuse boxes are autonomously fitted with different fuse configurations.


  • An Ontology-based Metamodel for Capability Descriptions

    by Michael Weser, Jurgen Bock, Siwara Schmitt, Alexander Perzylo, Kathrin Evers

    This paper presents an approach to describe abilities of manufacturing resources by a formal description of capabilities using Semantic Web technologies. A hierarchical ontology architecture is proposed to represent, publish, and extend knowledge on capabilities for different application domains and use cases. Furthermore, the paper describes patterns of how the underlying formal logic can be used in taxonomy modeling and the inference of implicit capability facts. The usability and performance of the approach was validated by formalizing capability knowledge of related work and evaluated in benchmarking a prototypical implemented tool for managing and querying catalogs of resources and their capabilities. The proposed concept is intended to be used as a foundation for a future multi-layered feasibility checking, which evaluates the compatibility of resources and their offered skills with the requirements of manufacturing tasks at symbolic and subsymbolic levels. Extended evaluations might be based on parameters, analytics, simulation, and other means.


  • Semantic Mates: Intuitive Geometric Constraints for Efficient Assembly Specifications

    by Fabian Wildgrube, Alexander Perzylo, Markus Rickert, Alois Knoll

    In this paper, we enhance our knowledge-based and constraint-based approach of robot programming with the concept of Semantic Mates. They describe intended mechanical connections between parts of an assembly. This allows deriving appropriate assembly poses from the type of connection and the geometric properties of the involved parts. The paper presents an ontology-based representation of Semantic Mates that is used to augment object models with additional information regarding their potential use in an assembly. Such semantically annotated object models can be used in our instruction framework to program a robot to perform assembly tasks through simple drag-and-drop operations in a graphical user interface.We conducted a user study with 21 participants in order to evaluate the efficiency and usability of the Semantic Mates concept based on a use-case from the domain of mechanical assembly. Across different experience levels in robotics, the participants achieved a significantly faster workflow and improved perceived usability compared to the manual specification of constraint-based assembly operations.


  • OPC UA NodeSet Ontologies as a Pillar of Representing Semantic Digital Twins of Manufacturing Resources

    by Alexander Perzylo, Stefan Profanter, Markus Rickert, Alois Knoll

    The effectiveness of cognitive manufacturing systems in agile production environments heavily depend on the automatic assessment of various levels of interoperability between manufacturing resources. For taking informed decisions, a semantically rich representation of all resources in a workcell or production line is required. OPC UA provides means for communication and information exchange in such distributed settings.This paper proposes a semantic representation of a resource’s properties, in which we use OWL ontologies to encode the information models that can be found in OPC UA NodeSet specifications. We further combine these models with an OWL-based description of the resource’s geometry and – if applicable – its kinematic model. This leads to a comprehensive semantic representation of hardware and software features of a manufacturing resource, which we call semantic digital twin. Among other things, it reduces costs through virtual prototyping and enables the automatic deployment of manufacturing tasks in production lines. As a result, small-batch assemblies become financially viable.In order to minimize the effort of creating OWL-based UA NodeSet descriptions, we provide a software tool for the automatic transformation of XML-based NodeSet specifications that adhere to the OPC Foundation’s NodeSet2 XML schema.


  • Open Access

    SMErobotics: Smart Robots for Flexible Manufacturing

    by Alexander Perzylo, Markus Rickert, Bjorn Kahl, Nikhil Somani, Christian Lehmann, Alexander Kuss, Stefan Profanter, Anders Billeso Beck, Mathias Haage, Mikkel Rath Hansen, et al.