QSQingbo Sun

Qingbo Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qingbo Sun has a total of 130 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Formation of Carbon–Carbon Interlinkage Bonds under High Pressure

    by Qingbo Sun, Jian-Tao Wang, Xingshuo Huang, Guoyin Shen, Jodie E. Bradby

    The formation of carbon-carbon interlinkage bonds (CCIBs) via the chemical binding of interlayer carbon atoms of many sp2-bonded carbon precursors is an essential step for synthesizing various diamond and diamond-like materials. Although the existence of CCIBs may be reasonably assumed under high-pressure conditions, direct experimental evidence has been scarce. Micro-Raman spectroscopy is here employed to track in situ the evolution of C-C bonds in a pressure range from ambient to 54 GPa. A pressure-induced two-stage (polynomial and linear) shift of the G peak and new generation of the CCIB peak at about 1550 cm-1 are observed in multiple types of layer-structured carbon precursors, including glassy carbon, natural graphite, and carbon nanotubes. The experimental discovery of CCIBs holds significance in comprehending phase transitions of sp2-bonded carbon materials and has implications for the advancement of novel carbon structures.

  • Open Access

    Shear-Induced Phase Transformations in Glassy Carbon

    by Inês F. Vaz, Alan G. Salek, Qingbo Sun, Xingshuo Huang, David. R. McKenzie, Jodie E. Bradby, Dougal G. McCulloch

    Shear-induced phase transformation in carbon materials presents a promising area of research with significant implications for material science, potentially allowing the selective synthesis of desired high-density carbon phases. Previous work has investigated the effects of hydrostatic and non-hydrostatic compression of glassy carbon, revealing that, at room temperature, phase transformation in glassy carbon occurs during non-hydrostatic compression in the presence of uniaxial stress component [ 1, 2]. Non-hydrostatic compression has been shown to induce the formation of high-density carbon phases, including nano-crystalline diamond and lonsdaleite, at pressures of around 80 GPa[ 3]. It has also been shown that GC compressed to 100 GPa and heated to 400°C fully transformed to nanocrystalline lonsdaleite[ 4]. However, investigating the effects of higher-pressure at room temperature may show the development of other novel high-density carbon phases as well as give an insight on how these phase transformations occur. This study explores shear-induced phase transformations in glassy carbon, when compressed non-hydrostatically at room temperature in a variety of different sample environments. The goal is to maximise shear with the aim of promoting phase changes and increasing the yield of high-density carbon phases produced. Transmission electron microscopy (TEM) is used to investigate the carbon phases formed in the recovered material. Typical observations include bands of nano-crystalline diamonds, surrounded by a nano-crystalline lonsdaleite phase as shown in Figure 1. Electron diffraction also provides information on the orientation of the phase with respect to the stress environment providing important information on the transformation pathways. Examples are shown in Figure 1 (d-e) which reveal that both the diamonds near the edge of the diamond bands and the surrounding lonsdaleite phase has a preferred crystallographic orientation [ 5]. Figure 1: A diamond shear band found from GC compressed to 145 GPa [ 5], where (a) is a bright-field TEM image of the band and (b) is a dark field image of the band. (c) The centre of the band contains randomly oriented diamonds, as indicated by an electron diffraction pattern. (d) Diffraction pattern from the sheath of the band, showing the oriented nanocrystalline diamond phase. (e) A diffraction pattern from a large distance from the centre of the band, indexed to oriented nanocrystalline lonsdaleite.

  • Role of A-Site Molecular Ions in the Polar Functionality of Metal–Organic Framework Perovskites

    by Teng Lu, David Cortie, Zuo-Xi Li, Narendirakumar Narayanan, Zhen Liu, Qingbo Sun, Terry J. Frankcombe, Garry J. McIntyre, Dehong Yu, Yun Liu


  • Hole-Pinned Defect Clusters for a Large Dielectric Constant up to GHz in Zinc and Niobium Codoped Rutile SnO2

    by Mengqi Jiang, Wanbiao Hu, Lilit Jacob, Qingbo Sun, Nicholas Cox, Doukyun Kim, Ye Tian, Luyang Zhao, Yang Liu, Li Jin, et al.

    High permittivity materials for a gigahertz (GHz) communication technology have been actively sought for some time. Unfortunately, in most materials, the dielectric constant starts to drop as frequencies increase through the megahertz (MHz) range. In this work, we report a large dielectric constant of ∼800 observed in defect-mediated rutile SnO2 ceramics, which is nearly frequency and temperature independent over the frequency range of 1 mHz to 35 GHz and temperature range of 50–450 K. Experimental and theoretical investigations demonstrate that the origin of the high dielectric constant can be attributed to the formation of locally well-defined Zn2+–Nb4+ defect clusters, which create hole-pinned defect dipoles. We believe that this work provides a promising strategy to advance dipole polarization theory and opens up a direction for the design and development of high frequency, broadband dielectric materials for use in future communication technology.


  • Chemical Synthesis and High-Pressure Reaction of Nb5+ Monodoped Rutile TiO2 Nanocrystals

    by Qingbo Sun, Larissa Q. Huston, Chunguang Tang, Ling-Ling Wei, Leigh R. Sheppard, Hua Chen, Terry J. Frankcombe, Jodie E. Bradby, Yun Liu


  • High performance bulk photovoltaics in narrow-bandgap centrosymmetric ultrathin films

    by Haoxin Mai, Teng Lu, Qingbo Sun, Robert G. Elliman, Felipe Kremer, The Duong, Kylie Catchpole, Qian Li, Zhiguo Yi, Terry J. Frankcombe, et al.

    In conventional bulk photovoltaics (BPVs), it is difficult to acquire both intensive photocurrent and large photovoltage output, which greatly limits the practical application. Here, we report a new strategy that can significantly increase photocurrent by five orders of magnitude whilst retaining the nature of high photovoltage of BPVs by introducing the local-chemistry-induced polar nanoregions (PNRs) into narrow-bandgap centrosymmetric ultrathin films. It is believed that these PNRs distribute randomly in non-ferroelectric insulator matrix and contribute to ferroelectric-like polarization when the sample thickness is comparable to the PNRs sizes. This allows to establish an internal field to effectively separate photogenerated electron–hole pairs even in centrosymmetric materials with narrow bandgap, and thus the power conversion efficiency (PCE) will increase significantly. BiVO4 (BVO) hereof is exemplified. Through intergrowing polar Bi4V2O11 nanoregions into the ultra-thin narrow bandgap BVO film, the PCE increases 1000 times compared with that of the BVO ceramic without taking advantage of the PNRs. This new strategy of producing high PV output in narrow-bandgap semiconductor thin films therefore will extend the candidate pool of bulk PV materials beyond traditional ferroelectricity, providing a pathway for practical application of bulk PV effect. Additionally, the combination of ferroelectric-like feature with a narrow bandgap in one material may create new optoelectronic functions.


  • Heterogeneous photocatalytic decomposition of per- and poly-fluoroalkyl substances: A review

    by Qingbo Sun, Chunyan Zhao, Terry J. Frankcombe, Hong Liu, Yun Liu

    Per- and poly-fluoroalkyl substances (PFASs) as emergent contaminants are generating serious environmental and health issues. An imminent task is thus to develop effective technologies to completely remove and ideally decompose PFASs through physical and/or chemical routes. Heterogeneous photocatalysis, which directly utilizes sunlight to drive the chemical decomposition of many organic compounds, is a promising solution to remediating PFASs-contaminated environment. In this review, the current progress of heterogeneous photocatalytic technology for decomposing PFASs is systematically summarized. The significance of environmental factors during heterogeneous photocatalysis is discussed from three aspects including anaerobic vs aerobic, acidic vs alkaline, and light use vs light loss. The associated reaction mechanisms and reaction routes are analyzed based on the stepwise change of PFASs molecular structures. Some further issues regarding PFASs heterogeneous photocatalysis are briefly pointed out along with the potential industrial applications of this technology. Heterogeneous photocatalysis is a promising solution to remediating environmental contaminants since it directly uses sunlight to drive the associated chemical reactions. Here, we review the current progress of heterogeneous photocatalytic technology for decomposing per- and poly-fluoroalkyl substances. Common issues and future development directions in this field are suggested.


  • Colossal permittivity of (Li, Nb) co-doped TiO2 ceramics

    by Wenlong Li, Zhifu Liu, Faqiang Zhang, Qingbo Sun, Yun Liu, Yongxiang Li


  • Collective nonlinear electric polarization via defect-driven local symmetry breaking

    by Wen Dong, David Cortie, Teng Lu, Qingbo Sun, Narendirakumar Narayanan, Wanbiao Hu, Lilit Jacob, Qian Li, Dehong Yu, Hua Chen, et al.

    The introduction of defect-pairs into centrosymmetric rutile TiO 2 produces a new form of collective nonlinear electrical polarization.