Thomas Vantroys
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Thomas Vantroys has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Alexandre Boe
IEMN-Institut d’Electronique de Microélectronique et de Nanotechnologie, Université de Lille, CNRS, UMR 8520, F-59658 Villeneuve d’Ascq, France
4 shared publications Gilles Grimaud
3 shared publicationsNadir Cherifi
3 shared publicationsYvan Peter
2 shared publications- Yvan Peter
CRISTAL Laboratory NOCE team Lille1 University Lille France
2 shared publications Alexandre Boe
Univ. Lille, CNRS, Centrale Lille, Univ. Polytechnique Hauts-de-France
1 shared publication
Latest Publications
- Open Access
Susceptibility of LoRa Communications to Intentional Electromagnetic Interference with Different Sweep Periods
This work presents a detailed analysis of the susceptibility of LoRa communications in the presence of intentional jamming signals. The analysis is performed with a periodic frequency-sweeping intentional electromagnetic interference, corresponding to the most common jamming signals. Such a waveform faithfully represents the signals emitted by commercial jammers. As the sweep period of the jamming signals may vary from one such device to another, the analyses are conducted with different sweep period values, from to . The experimental results indicate that the impact varies significantly according to the sweep period of the jamming signal. The detailed analysis allows us to identify the jamming signals to which LoRa communications can be resilient or not as well as to identify which LoRa channels are less affected during an attack.Open AccessSusceptibility of LoRa Communications to Intentional Electromagnetic Interference with Different Sweep Periods
This work presents a detailed analysis of the susceptibility of LoRa communications in the presence of intentional jamming signals. The analysis is performed with a periodic frequency-sweeping intentional electromagnetic interference, corresponding to the most common jamming signals. Such a waveform faithfully represents the signals emitted by commercial jammers. As the sweep period of the jamming signals may vary from one such device to another, the analyses are conducted with different sweep period values, from to . The experimental results indicate that the impact varies significantly according to the sweep period of the jamming signal. The detailed analysis allows us to identify the jamming signals to which LoRa communications can be resilient or not as well as to identify which LoRa channels are less affected during an attack. - 12 March 2022
- Published by Springer Nature
- p. 19-32
Characterization of a Connected Object by Its Acoustic Signature
- 12 March 2022
- Published by Springer Nature
- p. 19-32
Characterization of a Connected Object by Its Acoustic Signature
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 120-127
Automatic Inference of Energy Models for Peripheral Components in Embedded Systems
Surrounding autonomous embedded devices are in a constant expansion. The advent and the rise of Internet of Things (IoT) enable these objects to take a giant step forward, especially regarding their large scale deployment in real-world applications of the everyday life. A significant part of these objects are battery-powered and energy-dependent. Thus, energy is a critical resource which greatly complicates the development of the embedded software. By decomposing the energy consumption of a battery-powered IoT device, we can see that peripheral components are the major contributors among the overall consumption. Indeed, these components are exploited and repeatedly used by the object to interact and communicate with its surrounding environment during all the application lifetime. Acquire the expertise to handle accurately, during the development stage, the behaviour of every on-board peripheral component is a big challenge to improve the development of IoT embedded applications. To guide the developer in this task, we propose an automated inference procedure of energy models for peripheral components. An accurate automata-based model of the energy consumption can be generated, with only little efforts from the developer, based on real runtime measurements, providing precise energy figures. The proposed process is focused on a lightweight code generation step and simple analyses of the energy output traces, allowing a quick regeneration of the models in the case of a peripheral component modification. We show the potentials of the proposed procedure by real experiments on real peripherals. The obtained results are satisfactory, and we believe that our proposition is able to enhance the embedded development in an energy-constrained environment.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 120-127
Automatic Inference of Energy Models for Peripheral Components in Embedded Systems
Surrounding autonomous embedded devices are in a constant expansion. The advent and the rise of Internet of Things (IoT) enable these objects to take a giant step forward, especially regarding their large scale deployment in real-world applications of the everyday life. A significant part of these objects are battery-powered and energy-dependent. Thus, energy is a critical resource which greatly complicates the development of the embedded software. By decomposing the energy consumption of a battery-powered IoT device, we can see that peripheral components are the major contributors among the overall consumption. Indeed, these components are exploited and repeatedly used by the object to interact and communicate with its surrounding environment during all the application lifetime. Acquire the expertise to handle accurately, during the development stage, the behaviour of every on-board peripheral component is a big challenge to improve the development of IoT embedded applications. To guide the developer in this task, we propose an automated inference procedure of energy models for peripheral components. An accurate automata-based model of the energy consumption can be generated, with only little efforts from the developer, based on real runtime measurements, providing precise energy figures. The proposed process is focused on a lightweight code generation step and simple analyses of the energy output traces, allowing a quick regeneration of the models in the case of a peripheral component modification. We show the potentials of the proposed procedure by real experiments on real peripherals. The obtained results are satisfactory, and we believe that our proposition is able to enhance the embedded development in an energy-constrained environment.
- 22 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Toward Energy Profiling of Connected Embedded Systems
A huge number of connected objects are expected to be deployed over the coming years in various areas of everyday life. Many of these objects are energy-constrained and depend on a battery. Thus, energy is a critical resource that limits a large scale deployment, and greatly complicates the development of the embedded software on these objects. Hence, the ability to measure and finely profile the power consumption of such devices, and correlate it with the on-board application is a big challenge to improve the software development. Furthermore, common energy patterns can be extracted from the collected energy figures in order to provide guidelines allowing a proactive energy-based development. In this paper, we present an ongoing work about a lightweight framework for energy profiling of embedded applications source code at a functional granularity. It is driven by an on-line hardware-based measurement technique permitting to gather accurate energy figures. The framework is integrated into an energy-centric iterative development cycle allowing fast revaluations of the energy consumed by the targeted functions after each source code modification. Afterwards, we describe our future works about overcoming an unlocked state of art issue relative to asynchronous energy consumption profiling.
- 22 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Toward Energy Profiling of Connected Embedded Systems
A huge number of connected objects are expected to be deployed over the coming years in various areas of everyday life. Many of these objects are energy-constrained and depend on a battery. Thus, energy is a critical resource that limits a large scale deployment, and greatly complicates the development of the embedded software on these objects. Hence, the ability to measure and finely profile the power consumption of such devices, and correlate it with the on-board application is a big challenge to improve the software development. Furthermore, common energy patterns can be extracted from the collected energy figures in order to provide guidelines allowing a proactive energy-based development. In this paper, we present an ongoing work about a lightweight framework for energy profiling of embedded applications source code at a functional granularity. It is driven by an on-line hardware-based measurement technique permitting to gather accurate energy figures. The framework is integrated into an energy-centric iterative development cycle allowing fast revaluations of the energy consumed by the targeted functions after each source code modification. Afterwards, we describe our future works about overcoming an unlocked state of art issue relative to asynchronous energy consumption profiling.
- 1 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 639-644
Energy Consumption of Networked Embedded Systems
The Web of Things (WoT) defines the idea of addressing and requesting any surrounding connected device through Web applications. These devices are for a large part, tiny, wireless and mostly battery-powered. Therefore, energy represents a critical limiting resource for their large scale deployment in real life applications, such as smart cities or smart buildings. Consequently, the ability to measure, track and finely profile energy consumption of such devices and correlate it with the application driving the device functionalities is a big challenge to improve the development of WoT embedded applications. In this paper, we present our recent ongoing works on energy consumption measurement of networked embedded applications for the WoT area. More particularly, we focus on measuring energy consumption of the well-known Contiki Operating System HTTP Web server using two measurement methods, a simulation based method and a real world software based measurement method. Doing this, we quantify and model the gap existing between the simulation and the real world regarding network embedded applications, such as embedded Web servers. Afterwards, we describe our aims in using a real world hardware energy consumption measurement method and profile a home-made embedded Web server prototype called Smews. This latter could theoretically improve performances and power consumption of WoT applications relying on TCP/IP protocol.
- 1 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 639-644
Energy Consumption of Networked Embedded Systems
The Web of Things (WoT) defines the idea of addressing and requesting any surrounding connected device through Web applications. These devices are for a large part, tiny, wireless and mostly battery-powered. Therefore, energy represents a critical limiting resource for their large scale deployment in real life applications, such as smart cities or smart buildings. Consequently, the ability to measure, track and finely profile energy consumption of such devices and correlate it with the application driving the device functionalities is a big challenge to improve the development of WoT embedded applications. In this paper, we present our recent ongoing works on energy consumption measurement of networked embedded applications for the WoT area. More particularly, we focus on measuring energy consumption of the well-known Contiki Operating System HTTP Web server using two measurement methods, a simulation based method and a real world software based measurement method. Doing this, we quantify and model the gap existing between the simulation and the real world regarding network embedded applications, such as embedded Web servers. Afterwards, we describe our aims in using a real world hardware energy consumption measurement method and profile a home-made embedded Web server prototype called Smews. This latter could theoretically improve performances and power consumption of WoT applications relying on TCP/IP protocol.
- 1 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 202-204
Design and Evaluation of a Pervasive Workplace Learning System for Retail Stores
This paper presents the design and evaluation of a system for pervasive learning at the workplace in the domain of the retail industry. The user driven design of the prototypes and the field trials have enabled to put in light the design dimensions of such a solution : resources, activities and environment. We will show in this paper how these dimensions affect the overall solution.
- 1 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 202-204
Design and Evaluation of a Pervasive Workplace Learning System for Retail Stores
This paper presents the design and evaluation of a system for pervasive learning at the workplace in the domain of the retail industry. The user driven design of the prototypes and the field trials have enabled to put in light the design dimensions of such a solution : resources, activities and environment. We will show in this paper how these dimensions affect the overall solution.
- 18 January 2011
- Published by IGI Global Scientific Publishing
Pedagogical Scenario Modelling, Deployment, Execution and Evolution
Pedagogical Scenario Modelling, Deployment, Execution and Evolution: 10.4018/978-1-59904-633-4.ch015: The rise of the pedagogical scenario approach supported by the standardisation of IMS Learning Design is changing the focus from the pedagogical objects to
- 18 January 2011
- Published by IGI Global Scientific Publishing
Pedagogical Scenario Modelling, Deployment, Execution and Evolution
Pedagogical Scenario Modelling, Deployment, Execution and Evolution: 10.4018/978-1-59904-633-4.ch015: The rise of the pedagogical scenario approach supported by the standardisation of IMS Learning Design is changing the focus from the pedagogical objects to
- 1 January 2005
- Published by PERSEE Program in Sciences et Technologies de l'Information et de la Communication pour l'Éducation et la Formation
- Vol. 12 (1) , 117-155
COW, un service de support d’exécution de scénarios pédagogiques
Cet article présente un service de support d’exécution de scénarios pédagogiques conçu pour être intégré dans des plates-formes de formation existantes. Dans un premier temps nous prenons un point de vue ingénierie des plates-formes afin d’identifier les processus de conception et d’utilisation ainsi que les acteurs qui y sont associés. Dans un deuxième temps nous présentons les caractéristiques nécessaires que doit offrir notre service afin que les différents acteurs puissent gérer et utiliser des scénarios pédagogiques. La suite de l’article est consacrée à la présentation de la conception et de l’utilisation du service que nous avons développé. Nous présenterons plus en détail l’implémentation et la gestion des modèles de notre service qui est basé sur un système de workflows flexible.
- 1 January 2005
- Published by PERSEE Program in Sciences et Technologies de l'Information et de la Communication pour l'Éducation et la Formation
- Vol. 12 (1) , 117-155
COW, un service de support d’exécution de scénarios pédagogiques
Cet article présente un service de support d’exécution de scénarios pédagogiques conçu pour être intégré dans des plates-formes de formation existantes. Dans un premier temps nous prenons un point de vue ingénierie des plates-formes afin d’identifier les processus de conception et d’utilisation ainsi que les acteurs qui y sont associés. Dans un deuxième temps nous présentons les caractéristiques nécessaires que doit offrir notre service afin que les différents acteurs puissent gérer et utiliser des scénarios pédagogiques. La suite de l’article est consacrée à la présentation de la conception et de l’utilisation du service que nous avons développé. Nous présenterons plus en détail l’implémentation et la gestion des modèles de notre service qui est basé sur un système de workflows flexible.
- 1 January 2003
- Published by Springer Nature in Lecture Notes in Computer Science
- p. 168-182
COW, a Flexible Platform for the Enactment of Learning Scenarios
- 1 January 2003
- Published by Springer Nature in Lecture Notes in Computer Science
- p. 168-182
COW, a Flexible Platform for the Enactment of Learning Scenarios