Olga Solcova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Olga Solcova has a total of 132 co-authors. Here are the top co-authors by number of shared publications:
- Karel Soukup
Institute of Chemical Process Fundamentals of the Czech Academy of Sciences, Rozvojová 1/135, Suchdol, 165 00 Prague 6, Czech Republic
11 shared publications - Lenka Wimmerova
Department of Applied Ecology, Faculty of Environmental Sciences, Czech University of Life Sciences Prague, Kamycka 129, CZ-165 00 Prague, Czech Republic
8 shared publications - Frantisek Kastanek
Research Group of Catalysis and Reaction Engineering, Institute of Chemical Process Fundamentals of the Czech Academy of Sciences, Prague 6, Czechia
7 shared publications - Marketa Spacilova
Institute of Chemical Process Fundamentals of the CAS
7 shared publications - Pavel Dytrych
Czech Academy of Sciences, Institute of Chemical Process Fundamentals
7 shared publications - Martina Dlaskova
Institute of Chemical Process Fundamentals of the CAS
6 shared publications
Latest Publications
- Open Access
Organic-acid-derived feather hydrolysate drives soil microbiome succession toward copiotrophic and putatively plant-beneficial taxa
As circular agricultural inputs are increasingly sought, feather hydrolysate (FH), derived from keratin-rich poultry waste, has emerged as a promising fertilizer and biostimulant. However, how FH shapes soil microbiome succession over time, and what functional potential this restructuring carries, remains poorly understood. Here, we used multi-marker high-throughput sequencing of 16S, 18S, and ITS rDNA to track soil microbial communities over 30 days following FH amendment, with sampling at days 0, 1, 4, 14, and 30. FH induced a rapid and reproducible microbial succession characterized by an early decline in alpha diversity and a pronounced day-1 bloom of copiotrophic taxa, as inferred from predicted rrn operon copy-number profiles. This initial response was accompanied by enrichment of bacterial genera previously associated with plant growth-promoting traits, including pathogen suppression, nutrient solubilization, siderophore production, phytohormone synthesis, and ACC deaminase activity. Although these groups gradually declined after the initial peak, several remained at significantly elevated abundances throughout the 30-day experimental period. In parallel, FH-treated soils showed a sustained reduction in the cumulative relative abundance of genera annotated as putative phytopathogens. By integrating temporal community profiling, rrn-based life-strategy inference, and literature-derived functional annotation, we show that FH acts as a strong ecological filter, shifting the soil microbiome toward copiotrophic and putatively plant-beneficial taxa. These findings provide a temporal framework for understanding FH-mediated microbiome restructuring and highlight the need for future studies linking inferred microbial functional potential to measured disease incidence, nutrient fluxes, and plant performance across diverse soil contexts. Graphical
Open AccessOrganic-acid-derived feather hydrolysate drives soil microbiome succession toward copiotrophic and putatively plant-beneficial taxa
As circular agricultural inputs are increasingly sought, feather hydrolysate (FH), derived from keratin-rich poultry waste, has emerged as a promising fertilizer and biostimulant. However, how FH shapes soil microbiome succession over time, and what functional potential this restructuring carries, remains poorly understood. Here, we used multi-marker high-throughput sequencing of 16S, 18S, and ITS rDNA to track soil microbial communities over 30 days following FH amendment, with sampling at days 0, 1, 4, 14, and 30. FH induced a rapid and reproducible microbial succession characterized by an early decline in alpha diversity and a pronounced day-1 bloom of copiotrophic taxa, as inferred from predicted rrn operon copy-number profiles. This initial response was accompanied by enrichment of bacterial genera previously associated with plant growth-promoting traits, including pathogen suppression, nutrient solubilization, siderophore production, phytohormone synthesis, and ACC deaminase activity. Although these groups gradually declined after the initial peak, several remained at significantly elevated abundances throughout the 30-day experimental period. In parallel, FH-treated soils showed a sustained reduction in the cumulative relative abundance of genera annotated as putative phytopathogens. By integrating temporal community profiling, rrn-based life-strategy inference, and literature-derived functional annotation, we show that FH acts as a strong ecological filter, shifting the soil microbiome toward copiotrophic and putatively plant-beneficial taxa. These findings provide a temporal framework for understanding FH-mediated microbiome restructuring and highlight the need for future studies linking inferred microbial functional potential to measured disease incidence, nutrient fluxes, and plant performance across diverse soil contexts. Graphical
- Open Access
- 6 August 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Catalysis of Guerbet coupling of ethanol over high-surface-area MgO: The influence of catalyst porosity, the model of product rectification
- 6 August 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessCatalysis of Guerbet coupling of ethanol over high-surface-area MgO: The influence of catalyst porosity, the model of product rectification
- Open Access
- 27 April 2026
- Published by Elsevier in SSRN Electronic Journal
Catalysis of Guerbet coupling of ethanol over high-surface-area MgO: the influence of porosity, the model of rectification
The high surface area MgO catalysts (300 m2g−1) were prepared by mechanochemical reaction of low-surface-area MgO sources (less than 35 m2g−1) with water or water/alcohol mixtures in a planetary mill or mortar and pestle mill, followed by drying, dechlorination and calcination in air. The content of residual chlorides in catalysts was determined by instrumental neutron activation analysis. The microstructural properties of the catalyst were determined by X-ray diffraction and nitrogen physisorption measurements. The addition of alcohols broadened mesopores of MgOs. The intensive milling in the planetary mill effected MgO mesopores with diameters of about 20-60 nm and increased activity in Guerbet coupling of absolute ethanol to 1-butanol. This MgO catalyst was also evaluated in Guerbet coupling at atmospheric pressure and 400 °C using azeotropic bioethanol/water mixture. About 40 wt.% conversion of ethanol was reached yielding about 13 wt.% of 1-butanol and about 12 wt.% of other alcohols. The modeling of rectification showed feasibility of the product separation. The lowest energy and mass losses were achieved using a 3-column set-up enriched for the C6 and C8 alcohol separation. At the same time, up to 55 wt.% of ethanol can be recycled.
- 27 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCatalysis of Guerbet coupling of ethanol over high-surface-area MgO: the influence of porosity, the model of rectification
The high surface area MgO catalysts (300 m2g−1) were prepared by mechanochemical reaction of low-surface-area MgO sources (less than 35 m2g−1) with water or water/alcohol mixtures in a planetary mill or mortar and pestle mill, followed by drying, dechlorination and calcination in air. The content of residual chlorides in catalysts was determined by instrumental neutron activation analysis. The microstructural properties of the catalyst were determined by X-ray diffraction and nitrogen physisorption measurements. The addition of alcohols broadened mesopores of MgOs. The intensive milling in the planetary mill effected MgO mesopores with diameters of about 20-60 nm and increased activity in Guerbet coupling of absolute ethanol to 1-butanol. This MgO catalyst was also evaluated in Guerbet coupling at atmospheric pressure and 400 °C using azeotropic bioethanol/water mixture. About 40 wt.% conversion of ethanol was reached yielding about 13 wt.% of 1-butanol and about 12 wt.% of other alcohols. The modeling of rectification showed feasibility of the product separation. The lowest energy and mass losses were achieved using a 3-column set-up enriched for the C6 and C8 alcohol separation. At the same time, up to 55 wt.% of ethanol can be recycled.
- Open Access
- 10 March 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
pH-mediated adsorption of pharmaceuticals by biochar: Correlation between experiment and theory
- 10 March 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Open AccesspH-mediated adsorption of pharmaceuticals by biochar: Correlation between experiment and theory
- Open Access
- 8 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Contrasting Fates: pH Dynamics as the Master Variable in Pharmaceutical Sorption on Biochar
This study presents a comprehensive analysis of the sorption kinetics of four ionizable organic pollutants (Acetaminophen, Diclofenac, Tramadol, and Sulfamethoxazole) onto biochar under varying pH conditions. Moving beyond empirical curve-fitting, we show that the observed kinetics are mechanistically explained by a site-matching model in which the rate and extent of sorption are governed by the pH-dependent properties of both the pollutant and the sorbent surface. The biochar surface charge reverses from predominantly anionic at high pH (9.4) to cationic at low pH (5.0), while pollutants transition between charged and neutral states according to their pKa values. We formalize this with pH-dependent state vectors for the surface and for each pollutant that interact through a universal 3 × 3 interaction matrix encoding electrostatic attraction, repulsion, and hydrophobic partitioning. Critically, we demonstrate via Bayesian Information Criterion (BIC) analysis that standard empirical models (Sips, T´oth) are statistically invalidated (ΔBIC > 70) in the alkaline regime, where the system exhibits stiff, multi-timescale dynamics. The proposed HARMONIA framework resolves this stiffness, achieving a > 99.9% Akaike probability of being the correct model. Independent spectroscopic measurements (Raman, FTIR) corroborate the mechanism, linking kinetic rate constants directly to the availability of aromatic domains and oxygenated surface groups. This work establishes a rigorous physical basis for predicting sorption performance in complex, variable-pH environments.
- 8 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessContrasting Fates: pH Dynamics as the Master Variable in Pharmaceutical Sorption on Biochar
This study presents a comprehensive analysis of the sorption kinetics of four ionizable organic pollutants (Acetaminophen, Diclofenac, Tramadol, and Sulfamethoxazole) onto biochar under varying pH conditions. Moving beyond empirical curve-fitting, we show that the observed kinetics are mechanistically explained by a site-matching model in which the rate and extent of sorption are governed by the pH-dependent properties of both the pollutant and the sorbent surface. The biochar surface charge reverses from predominantly anionic at high pH (9.4) to cationic at low pH (5.0), while pollutants transition between charged and neutral states according to their pKa values. We formalize this with pH-dependent state vectors for the surface and for each pollutant that interact through a universal 3 × 3 interaction matrix encoding electrostatic attraction, repulsion, and hydrophobic partitioning. Critically, we demonstrate via Bayesian Information Criterion (BIC) analysis that standard empirical models (Sips, T´oth) are statistically invalidated (ΔBIC > 70) in the alkaline regime, where the system exhibits stiff, multi-timescale dynamics. The proposed HARMONIA framework resolves this stiffness, achieving a > 99.9% Akaike probability of being the correct model. Independent spectroscopic measurements (Raman, FTIR) corroborate the mechanism, linking kinetic rate constants directly to the availability of aromatic domains and oxygenated surface groups. This work establishes a rigorous physical basis for predicting sorption performance in complex, variable-pH environments.
- Open Access
- 3 December 2025
- Published by Elsevier in South African Journal of Chemical Engineering
- Vol. 55, 358-367
Novel carbon-based photocatalysts for degradation of micropollutants
- 3 December 2025
- Published by Elsevier in South African Journal of Chemical Engineering
- Vol. 55, 358-367
Open AccessNovel carbon-based photocatalysts for degradation of micropollutants
- Open Access
- 2 December 2025
- Published by Springer Nature in World Journal of Microbiology and Biotechnology
- Vol. 41 (12) , 494
Ammonia release from hydrolysed animal and food waste by the hop endophyte, Pantoea agglomerans
The food industry and agriculture produce large amounts of waste that can be used in many upcycling applications. An interesting solution may be to return the necessary nutrients for plants to the soil and improve plant growth at the same time by using waste from animal production and food processing as a substrate for endophytic bacteria. Endophytic bacteria that naturally colonize plants can help plants absorb nutrients and may produce substances that promote plant growth. Animal waste (feathers, chicken or fish scraps) and spent brewer’s yeast rich in protein were hydrolysed into a mixture of soluble peptides and amino acids. The hydrolysates were used for the release of ammonium ions by the bacterium Pantoea agglomerans DBM 3797, isolated from hops. The release of ammonium ions is a result of excess nitrogen over carbon during the growth of bacteria that use amino acids as a source of carbon and energy. Ammonium ions are a form of nitrogen that is very easily utilized by plants. High concentrations of ammonium ions in g/L were achieved with both acidic and alkaline chicken feather hydrolysates and in spent brewer’s yeast autolysate, with the highest ammonium ions per unit of original material (41 mg/g) being released from the feather alkaline hydrolysate. It was also confirmed that differences in waste types and their processing have a significant effect on ammonia release, which is important for the development of a new biofertilizer. Proof of concept test on 3-week-old lettuce seedlings showed that addition to the soil of hydrolysate containing P. agglomerans significantly promoted the growth of the plant root system. Graphical abstract
- 2 December 2025
- Published by Springer Nature in World Journal of Microbiology and Biotechnology
- Vol. 41 (12) , 494
Open AccessAmmonia release from hydrolysed animal and food waste by the hop endophyte, Pantoea agglomerans
The food industry and agriculture produce large amounts of waste that can be used in many upcycling applications. An interesting solution may be to return the necessary nutrients for plants to the soil and improve plant growth at the same time by using waste from animal production and food processing as a substrate for endophytic bacteria. Endophytic bacteria that naturally colonize plants can help plants absorb nutrients and may produce substances that promote plant growth. Animal waste (feathers, chicken or fish scraps) and spent brewer’s yeast rich in protein were hydrolysed into a mixture of soluble peptides and amino acids. The hydrolysates were used for the release of ammonium ions by the bacterium Pantoea agglomerans DBM 3797, isolated from hops. The release of ammonium ions is a result of excess nitrogen over carbon during the growth of bacteria that use amino acids as a source of carbon and energy. Ammonium ions are a form of nitrogen that is very easily utilized by plants. High concentrations of ammonium ions in g/L were achieved with both acidic and alkaline chicken feather hydrolysates and in spent brewer’s yeast autolysate, with the highest ammonium ions per unit of original material (41 mg/g) being released from the feather alkaline hydrolysate. It was also confirmed that differences in waste types and their processing have a significant effect on ammonia release, which is important for the development of a new biofertilizer. Proof of concept test on 3-week-old lettuce seedlings showed that addition to the soil of hydrolysate containing P. agglomerans significantly promoted the growth of the plant root system. Graphical abstract
- Open Access
Innovative Sorbents for the Removal of Micropollutants from Water
This review summarizes the current knowledge in the field of preparing new and/or innovative materials that can be advantageously used for the sorption of emerging pollutants from water. This paper highlights new innovative materials such as transition metal-modified biochar, zeolites, clays, carbon fibers, graphene, metal organic frameworks, and aerogels. These materials have great potential for the removal of heavy metals from water, particularly due to their large surface area, nanoscale size, and availability of various functionalities; moreover, they can easily be chemically modified and recycled. This paper not only highlights the advantages and ever-improving physicochemical properties of these new types of materials but also critically points out their shortcomings and suggests possible future directions.
Open AccessInnovative Sorbents for the Removal of Micropollutants from Water
This review summarizes the current knowledge in the field of preparing new and/or innovative materials that can be advantageously used for the sorption of emerging pollutants from water. This paper highlights new innovative materials such as transition metal-modified biochar, zeolites, clays, carbon fibers, graphene, metal organic frameworks, and aerogels. These materials have great potential for the removal of heavy metals from water, particularly due to their large surface area, nanoscale size, and availability of various functionalities; moreover, they can easily be chemically modified and recycled. This paper not only highlights the advantages and ever-improving physicochemical properties of these new types of materials but also critically points out their shortcomings and suggests possible future directions.
- Open Access
Challenges and Advances in Tertiary Waste Water Treatment for Municipal Treatment Plants
Municipal waste water treatment plants have a fundamental task, which is to rid waste water of toxic and health-threatening organic and inorganic substances, including unwanted microorganisms and other pollutants, with the highest possible efficiency so that the discharged water does not contaminate the natural environment, which happens in the case of imperfect cleaning. Current WWTPs usually have a preliminary, primary, and secondary stage, and in very few cases even a tertiary stage, which no longer guarantees the sufficient removal of pollutants from waste water. This research presents the current situation in different parts of the world concerning the possibility of solving the current situation regarding the tertiary and quaternary stages of this process, especially in small and rural WWTPs serving up to approx. 10,000 equivalent inhabitants, which could ensure the removal of so-called emerging pollutants, including microplastics, and would stop WWTPs being point sources of environmental contamination.
Open AccessChallenges and Advances in Tertiary Waste Water Treatment for Municipal Treatment Plants
Municipal waste water treatment plants have a fundamental task, which is to rid waste water of toxic and health-threatening organic and inorganic substances, including unwanted microorganisms and other pollutants, with the highest possible efficiency so that the discharged water does not contaminate the natural environment, which happens in the case of imperfect cleaning. Current WWTPs usually have a preliminary, primary, and secondary stage, and in very few cases even a tertiary stage, which no longer guarantees the sufficient removal of pollutants from waste water. This research presents the current situation in different parts of the world concerning the possibility of solving the current situation regarding the tertiary and quaternary stages of this process, especially in small and rural WWTPs serving up to approx. 10,000 equivalent inhabitants, which could ensure the removal of so-called emerging pollutants, including microplastics, and would stop WWTPs being point sources of environmental contamination.
- Open Access
- 11 July 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (14) , 5920
Olfactory Repellents in Road Ecology: What We Know and What to Focus on in the Future
Road transport systems kill millions of animals on every inhabited continent each year, and thousands of human lives are lost. Odour repellents (ORE) are a WVC mitigation measure which have been extensively applied across central Europe to prevent or minimise the number of ungulate–vehicle collisions (UVCs). OREs aim to increase the vigilance of ungulates near roads and therefore change their behaviour in areas where vehicle collisions may occur. Despite many scientific papers on the topic of odour repellent effectiveness, a lack of behavioural studies means there is still little understanding of the mechanism of ORE functionality. OREs are applied as an area repellent, so their effectiveness is influenced by multiple factors, and constantly discussed by both academics and the lay public. This paper summarises the state of knowledge about application and effectiveness of odour repellents in road ecology, and suggests research questions to fill information gaps.
- 11 July 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (14) , 5920
Open AccessOlfactory Repellents in Road Ecology: What We Know and What to Focus on in the Future
Road transport systems kill millions of animals on every inhabited continent each year, and thousands of human lives are lost. Odour repellents (ORE) are a WVC mitigation measure which have been extensively applied across central Europe to prevent or minimise the number of ungulate–vehicle collisions (UVCs). OREs aim to increase the vigilance of ungulates near roads and therefore change their behaviour in areas where vehicle collisions may occur. Despite many scientific papers on the topic of odour repellent effectiveness, a lack of behavioural studies means there is still little understanding of the mechanism of ORE functionality. OREs are applied as an area repellent, so their effectiveness is influenced by multiple factors, and constantly discussed by both academics and the lay public. This paper summarises the state of knowledge about application and effectiveness of odour repellents in road ecology, and suggests research questions to fill information gaps.