MKMark V. Khenkin

Mark V. Khenkin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mark V. Khenkin has a total of 336 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Accelerated aging replicates spatially non-uniform degradation modes observed in outdoor-aged perovskite solar cells

    by Ulas Erdil, Lars Bergenholtz, Mark Khenkin, Marko Remec, Florian Ruske, René Schwiddessen, Guillermo Farias-Basulto, Philippe Holzhey, Erik Wutke, Quiterie Emery, et al.


  • Bridging Accelerated Indoor Aging and Outdoor Stability of Perovskite Solar Cells Using a Bayesian Modeling Framework

    by Joseph Chakar, Ulas Erdil, Antoine Burgaud, Marko Remec, Antonio Abate, Carolin Ulbrich, Rutger Schlatmann, Yvan Bonnassieux, Mark Khenkin, Jean‐Baptiste Puel

    The commercial viability of promising perovskite photovoltaic technologies hinges on their ability to achieve multidecade operational lifetimes, driving a global effort to design accelerated aging tests that can reliably predict real‐world stability. However, establishing a link between indoor and outdoor degradation remains challenging, as it typically requires sophisticated characterization techniques that are difficult to implement and interpret. In this work, we demonstrate how coupling physics‐based modeling with a probabilistic Bayesian framework allows us to validate the relationship between indoor and outdoor degradation pathways of perovskite solar cells (PSCs) using readily available current–voltage curve data. Our findings reveal that bulk trap density is a dominant degradation mechanism common to p‐i‐n PSCs tested under various indoor and outdoor conditions, while new degradation modes not yet observed during outdoor exposure emerge under elevated stress levels. Furthermore, they emphasize the need to move beyond efficiency‐based lifetime metrics toward a mechanistic framework that can uncover potential failure points. This flexible approach can guide the design of predictive accelerated testing protocols while offering broad applications for optimizing fabrication processes and assessing performance across the solar industry and beyond.


  • Open Access

    Perovskite‐CIGSe Tandem Solar Cell: Over One Year of Outdoor Monitoring

    by Guillermo Farias‐Basulto, Ivona Kafedjiska, Tobias Bertram, Maximilian Riedel, Quiterie Emery, Marko Remec, Paolo Graniero, Mark Khenkin, Christian A. Kaufmann, Iver Lauermann, et al.

    Tandem solar cells can surpass the limitations of single‐junction devices, promising increased performance due to lower thermalization losses. Even though many research and industrial upscaling efforts are based on perovskite‐Si tandems, all‐thin‐film photovoltaic (PV) devices, for instance with chalcopyrite (CIGSe) and perovskite, can offer many advantages such as significant cost and material savings and access to niche markets like building integrated‐ and flexible PV. However, long‐term stability and outdoor performance of perovskite‐based tandem devices is to this day challenging. This work presents the first data analysis of year‐round outdoor measurements (mpp‐tracked) of a perovskite‐chalcopyrite tandem device with a starting efficiency of about 23.14% before encapsulation. The maximum outdoor performance of the tandem device changed during the period of observation, reaching the peak performance in April and then decreased due to the device degradation. At its maximum outdoor performance, the tandem could reach up to 68% higher instantaneous power output, relative to its single‐junction reference (CIGSe‐SJ). In addition, a quantitative time series performance analysis, exemplary qualitative imaging characterization of the tandem before and after outdoor exposure, is shown. Finally, the possibility of predicting the immediate performance of an all‐thin‐film tandem is verified by using a multiple linear regression model with accuracies generally exceeding 90%.


  • Open Access

    Seasonality in Perovskite Solar Cells: Insights from 4 Years of Outdoor Data

    by Marko Remec, Mark Khenkin, Ulas Erdil, Quiterie Emery, Gopinath Paramasivam, Eva Unger, Rutger Schlatmann, Steve Albrecht, Marko Topič, Carolin Ulbrich

    Insights are reported from a 4‐year outdoor study in Berlin using encapsulated p–i–n perovskite solar cells with the structure ITO | 2PACz | Cs0.15FA0.85PbI2.55Br0.45 (bandgap of 1.65 eV) | C60 | SnO2 | Cu. Peak summer performance showed little to no degradation during the first two summers and only ≈2% absolute drop in outdoor power conversion efficiency from the first to fourth summer. Despite good stability, the devices exhibit significant seasonality, with winter performance up to 30% lower than in summer during the first year, increasing with aging. The factors contributing to this seasonality are separated into four categories: I) solar spectrum, II) device temperature, III) maximum power point tracking losses, and IV) metastability effects. Among these, metastability – particularly light‐soaking behavior – is the largest contributing factor that sets perovskite technology apart from conventional photovoltaics. It was found that in cold, low‐light winter conditions, voltage gains from light‐soaking remain unsaturated, leading to reduced performance. Full saturation requires more than 24 h of continuous illumination, indicating that device performance depends on more than a single diurnal cycle. This comprehensive analysis highlights the complexity of seasonal behavior and the importance of long‐term, real‐world testing for accurate forecasting of perovskite photovoltaic energy yield.


  • Open Access

    Mimicking Outdoor Ion Migration in Perovskite Solar Cells: A Forward Bias, No-Light Accelerated Aging Approach

    by Ulas Erdil, Mark Khenkin, Marko Remec, Quiterie Emery, Vediappan Sudhakar, Rutger Schlatmann, Antonio Abate, Eugene A. Katz, Carolin Ulbrich

    Perovskite solar cells (PSCs) are expected to transform the photovoltaic market; however, their unproven operational stability requires urgent attention, particularly accelerated aging tests. Currently, illumination is the primary stressor in such tests. In this work, we present an accelerated aging procedure consisting of prolonged forward biasing followed by a dark storage (postbias rest) phase, conducted entirely in the dark. During aging under forward bias, ion migration led to impeded charge transport, macroscopic defect growth, and an adverse response of the cells to short light soaking, all of which recovered in the postbias rest phase, yet resulted in increased recombination due to redistribution of ions. We found that outdoor operation of PSCs in Berlin, Germany, over a 20-month period exhibited similar dynamics, with periods of higher temperature and irradiance (spring-summer) aligning with the forward bias phase and cooler, dimmer periods (fall-winter) aligning with the postbias rest phase. This paves the way for accelerated aging tests that can mimic ion migration-induced degradation outdoors without requiring an illumination source.


  • Open Access

    Tips and Tricks for a Good Encapsulation for Perovskite‐Based Solar Cells

    by Quiterie Emery, Lea Dagault, Mark Khenkin, Nikoleta Kyranaki, Wander Max Bernardes de Araújo, Ulas Erdil, Matthias Demuylder, Stephane Cros, Rutger Schlatmann, Bernd Stannowski, et al.

    Encapsulation is a critical topic to ensure the successful implementation of perovskite photovoltaics. Recently, vacuum lamination has been shown as a promising approach that combines compatibility with current industrial processes in conventional photovoltaic (PV) manufacturing and suitability to achieve good results with perovskites. Here, we explore some of the attractive encapsulation materials in terms of their ability to prevent moisture ingress, withstand elevated temperatures, and have suitable mechanical properties to avoid thermomechanical issues. We utilized the previously suggested concept of the “perovskite test,” an optical test with simple sample fabrication, for evaluating encapsulation quality and validated the findings with the full solar cell stack. Unsurprisingly, encapsulants without an edge sealant showed insufficient protection from moisture. Ionomer in combination with butyl edge seal showed the best barrier properties; however, this stack led to rapid delamination of the cell layers in thermal cycling tests. Configuration with only edge sealant does not have such an issue in principle (no mechanical stress applied), but an absence of the polymer in the stack is unfavorable in terms of optical design and sometimes showed perovskite degradation that we assign to trapped moisture in the butyl itself. Polyolefin with butyl edge sealant is not free of degradation but showed the most promising compromise by passing the damp heat test and showing fewer issues in the thermal cycling experiments. In general, our material study and optimization presented in this manuscript show that a holistic approach is needed when choosing an optimal encapsulation scheme for perovskite devices.


  • Open Access

    Delamination of Perovskite Solar Cells in Thermal Cycling and Outdoor Tests

    by Ulas Erdil, Mark Khenkin, Wander Max Bernardes de Araujo, Quiterie Emery, Iver Lauermann, Vasiliki Paraskeva, Matthew Norton, Sudhakar Vediappan, D. Kishore Kumar, Ritesh Kant Gupta, et al.

    For the commercialization of perovskite solar cells (PSCs), detection of associated degradation mechanisms and mitigation of their effect is of paramount importance. The former requires outdoor and indoor stability tests to detect these mechanisms under real operation conditions and to accelerate them under controlled environments. Herein, the thermomechanical stability of encapsulated PSCs in outdoor tests at three locations coupled with indoor thermal cycling tests is investigated. Results show that encapsulant‐induced partial delamination can occur in outdoor and indoor tests, leading to disruption in device integrity and substantial loss in the cell active area and short‐circuit current. The findings suggest that delamination involves C60 and SnO2 layers as the mechanically weakest point in the device stack. To the best of our knowledge, this work is the first demonstration of delamination in encapsulated PSCs under real operation conditions. While partial delamination emerged on some of the cells exposed in Israel and Cyprus in just a few weeks, it did not occur in Germany over 2.5 years of outdoor exposure. This highlights the importance of multiclimate outdoor testing to validate the significance of failure modes observed through accelerated indoor testing.


  • Open Access

    From Sunrise to Sunset: Unraveling Metastability in Perovskite Solar Cells by Coupled Outdoor Testing and Energy Yield Modelling

    by Marko Remec, Špela Tomšič, Mark Khenkin, Quiterie Emery, Jinzhao Li, Florian Scheler, Boštjan Glažar, Marko Jankovec, Marko Jošt, Eva Unger, et al.

    Perovskite‐based solar cells exhibit peculiar outdoor performance which is not yet fully understood. The results of outdoor tests may contain hidden, but valuable information that cannot be fully extracted from measurements alone. One such phenomenon is the effect of nighttime degradation and the subsequent light‐soaking recovery, which can take from a few hours in the morning up to the entire day. In this work, long‐term outdoor monitoring is combined with energy yield modeling to qualitatively and quantitatively investigate the effect of light‐soaking recovery in both single junction and tandem perovskite‐based devices. Following the novel methodology presented in this study, it is observed that the light‐soaking effect depends not only on the daily irradiation but also on the device temperature, and it can be described using a simple empirical formalism. Incorporating this dependency into the energy yield model results in an excellent agreement between the simulated and the measured outdoor data, which allows to perform long‐term prediction studies. The model estimates that the light‐soaking metastability effect decreases the attainable annual energy yield by up to ≈5% for the studied single junction devices, and for tandems by up to ≈3%, depending on the geographical location, and even more for non‐optimal device orientation.


  • The way to predict outdoor lifetime

    by Mark Khenkin, Steve Albrecht


  • Open Access

    Light cycling as a key to understanding the outdoor behaviour of perovskite solar cells

    by Mark V. Khenkin, Hans Köbler, Marko Remec, Rajarshi Roy, Ulas Erdil, Jinzhao Li, Nga Phung, Ghefar Adwan, Gopinath Paramasivam, Quiterie Emery, et al.

    The long-term outdoor performance and stability of Perovskite Solar Cells showed several features that stem from the device's meta-stability. To rationalize this behavior we need indoor ageing experiments with cycled light.