Shixiong Min
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shixiong Min has a total of 196 co-authors. Here are the top co-authors by number of shared publications:
Fang Wang
School of Chemistry and Chemical Engineering, North Minzu University, Yinchuan, 750021, P. R. China
82 shared publicationsZhengguo Zhang
School of Chemistry and Chemical Engineering, North Minzu University, Yinchuan, 750021, P. R. China
60 shared publicationsYonggang Lei
17 shared publications- Kuo-Wei Huang
King Abdullah University of Science and Technology
15 shared publications Gongxuan Lu
13 shared publicationsXiangyu Liu
School of Chemistry and Chemical Engineering, North Minzu University, Yinchuan, 750021, P. R. China
11 shared publications
Latest Publications
- 22 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (63) , 43889-43899
Zn-mediated carbothermal reduction toward a self-supported defective zincophilic carbon membrane for Zn-ion batteries
A self-supported 3D hybrid Zn anode constructed from a natural wood-derived defective carbon membrane exhibits long-term cycling stability, low voltage hysteresis, and superior rate capability for ZIBs.
- 22 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (63) , 43889-43899
Zn-mediated carbothermal reduction toward a self-supported defective zincophilic carbon membrane for Zn-ion batteries
A self-supported 3D hybrid Zn anode constructed from a natural wood-derived defective carbon membrane exhibits long-term cycling stability, low voltage hysteresis, and superior rate capability for ZIBs.
- 15 October 2026
- Published by Wiley in ChemPhotoChem
- Vol. 10 (10)
Upgrading Natural Volcanic Rock Into an Active and Stable Cocatalyst for Solar Hydrogen Evolution Reaction
Developing active, low‐cost, and stable cocatalysts is crucial to achieve efficient photocatalytic water splitting for scalable H 2 production. Herein, we report a simple low‐temperature phosphidation strategy to convert the endogenous Fe species within natural volcanic rock (VR) into highly active and stable supported Fe 2 P cocatalysts for the photocatalytic H 2 evolution reaction (HER). Upon phosphidation, the Fe species within the oxide matrix of the VR substrate readily transform into highly dispersed surface‐embedded Fe 2 P nanorods, acting as stable and active H 2 ‐evolving sites. In an Erythrosin B‐sensitized system, the dispersed Fe 2 P/VR cocatalyst can efficiently catalyze the photocatalytic HER, achieving an H 2 evolution rate of 1.8 mmol g −1 h −1 and a dye‐based turnover number of 48.4 under visible light. More importantly, the Fe 2 P/VR cocatalyst can be readily integrated with semiconductor photocatalysts (P25 and CdS) to fabricate composite photocatalysts, which can be further formulated into monolithic photocatalyst sheets and exhibit excellent activity and stability for the photocatalytic HER in a panel reactor. This work offers a straightforward and sustainable strategy for upcycling abundant transition metal‐containing minerals into efficient H 2 evolution cocatalysts toward scalable solar H 2 production.
- 15 October 2026
- Published by Wiley in ChemPhotoChem
- Vol. 10 (10)
Upgrading Natural Volcanic Rock Into an Active and Stable Cocatalyst for Solar Hydrogen Evolution Reaction
Developing active, low‐cost, and stable cocatalysts is crucial to achieve efficient photocatalytic water splitting for scalable H 2 production. Herein, we report a simple low‐temperature phosphidation strategy to convert the endogenous Fe species within natural volcanic rock (VR) into highly active and stable supported Fe 2 P cocatalysts for the photocatalytic H 2 evolution reaction (HER). Upon phosphidation, the Fe species within the oxide matrix of the VR substrate readily transform into highly dispersed surface‐embedded Fe 2 P nanorods, acting as stable and active H 2 ‐evolving sites. In an Erythrosin B‐sensitized system, the dispersed Fe 2 P/VR cocatalyst can efficiently catalyze the photocatalytic HER, achieving an H 2 evolution rate of 1.8 mmol g −1 h −1 and a dye‐based turnover number of 48.4 under visible light. More importantly, the Fe 2 P/VR cocatalyst can be readily integrated with semiconductor photocatalysts (P25 and CdS) to fabricate composite photocatalysts, which can be further formulated into monolithic photocatalyst sheets and exhibit excellent activity and stability for the photocatalytic HER in a panel reactor. This work offers a straightforward and sustainable strategy for upcycling abundant transition metal‐containing minerals into efficient H 2 evolution cocatalysts toward scalable solar H 2 production.
- 27 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (7) , 4214-4225
Synergistic oxidation-induced exsolution–reconstruction enables heterostructured Cu/Zn hollow fibers for high current density syngas electrosynthesis
A heterostructured Cu/Zn hollow fiber gas-penetrable electrode is developed through a synergistic oxidation-induced exsolution–reconstruction strategy, exhibiting a high current density and stability for electrocatalytic CO 2 reduction to syngas.
- 27 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (7) , 4214-4225
Synergistic oxidation-induced exsolution–reconstruction enables heterostructured Cu/Zn hollow fibers for high current density syngas electrosynthesis
A heterostructured Cu/Zn hollow fiber gas-penetrable electrode is developed through a synergistic oxidation-induced exsolution–reconstruction strategy, exhibiting a high current density and stability for electrocatalytic CO 2 reduction to syngas.
A Red Brick‐Derived Fe 2 P‐Based Cocatalyst Sheet Enables Monolithic Photocatalysts for Efficient Solar Hydrogen Production
Beyond powder‐suspension photocatalytic systems, monolithic photocatalysts featuring excellent recyclability and enhanced light utilization efficiency have been promising candidates for large‐scale solar‐driven photocatalytic water splitting, yet often suffer from complex fabrication processes and reliance on the use of expensive scaffolds and additional cocatalyst loading. Herein, we develop monolithic photocatalysts via utilizing a cocatalyst sheet (Fe 2 P/RB) derived from red brick (RB) by vapor‐phase phosphidation as a scaffold to anchor particulate semiconductors (e.g., CdS, Zn 0.5 Cd 0.5 S, TiO 2 , and g‐C 3 N 4 ), for solar‐driven photocatalytic H 2 production from the water splitting. The endogenous Fe oxides within RB sheet are in situ converted into embedded Fe 2 P during phosphidation, serving as electron sinks to promote charge separation and H 2 ‐evolving active sites to improve water splitting performance. Impressively, the monolithic CdS‐Fe 2 P/RB photocatalyst sheet achieves a visible‐light (λ ≥ 420 nm) photocatalytic HER rate of 7.7 mmol g CdS −1 h −1 and an apparent quantum yield (AQY) as high as 30.5% at 420 nm, which are 12.4 and 3.2 times higher than that of the powder‐suspension system, respectively. Furthermore, the excellent integrity enables CdS‐Fe 2 P/RB to stably produce H 2 for 120 h with negligible activity decay. This work offers an effective strategy for the rational designs of cost‐efficient and high‐performance monolithic photocatalysts for solar water splitting.
A Red Brick‐Derived Fe 2 P‐Based Cocatalyst Sheet Enables Monolithic Photocatalysts for Efficient Solar Hydrogen Production
Beyond powder‐suspension photocatalytic systems, monolithic photocatalysts featuring excellent recyclability and enhanced light utilization efficiency have been promising candidates for large‐scale solar‐driven photocatalytic water splitting, yet often suffer from complex fabrication processes and reliance on the use of expensive scaffolds and additional cocatalyst loading. Herein, we develop monolithic photocatalysts via utilizing a cocatalyst sheet (Fe 2 P/RB) derived from red brick (RB) by vapor‐phase phosphidation as a scaffold to anchor particulate semiconductors (e.g., CdS, Zn 0.5 Cd 0.5 S, TiO 2 , and g‐C 3 N 4 ), for solar‐driven photocatalytic H 2 production from the water splitting. The endogenous Fe oxides within RB sheet are in situ converted into embedded Fe 2 P during phosphidation, serving as electron sinks to promote charge separation and H 2 ‐evolving active sites to improve water splitting performance. Impressively, the monolithic CdS‐Fe 2 P/RB photocatalyst sheet achieves a visible‐light (λ ≥ 420 nm) photocatalytic HER rate of 7.7 mmol g CdS −1 h −1 and an apparent quantum yield (AQY) as high as 30.5% at 420 nm, which are 12.4 and 3.2 times higher than that of the powder‐suspension system, respectively. Furthermore, the excellent integrity enables CdS‐Fe 2 P/RB to stably produce H 2 for 120 h with negligible activity decay. This work offers an effective strategy for the rational designs of cost‐efficient and high‐performance monolithic photocatalysts for solar water splitting.
- 6 January 2026
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 10 (5) , 840-851
Intrinsic carbon defect-engineered carbonized wood membrane electrodes for superior supercapacitors
A highly defective porous carbonized wood membrane (hd-CWM) is developed as a free-standing supercapacitor electrode with high areal capacitance, excellent rate capability, and exceptional durability.
- 6 January 2026
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 10 (5) , 840-851
Intrinsic carbon defect-engineered carbonized wood membrane electrodes for superior supercapacitors
A highly defective porous carbonized wood membrane (hd-CWM) is developed as a free-standing supercapacitor electrode with high areal capacitance, excellent rate capability, and exceptional durability.
- 6 January 2026
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 10 (7) , 1120-1132
Converting coal gasification slag into monolithic supercapacitor electrodes via endogenous Fe-catalyzed growth of N-doped carbon nanotubes
A monolithic electrode (Fe 3 C@NCNTs/CGS) is developed by directly growing high-density N-doped carbon nanotubes (NCNTs) within solidified coal gasification slag (CGS) powder, exhibiting high areal capacitance, energy density, and cycling stability.
- 6 January 2026
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 10 (7) , 1120-1132
Converting coal gasification slag into monolithic supercapacitor electrodes via endogenous Fe-catalyzed growth of N-doped carbon nanotubes
A monolithic electrode (Fe 3 C@NCNTs/CGS) is developed by directly growing high-density N-doped carbon nanotubes (NCNTs) within solidified coal gasification slag (CGS) powder, exhibiting high areal capacitance, energy density, and cycling stability.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
Citric acid-mediated in situ photochemical synthesis of amorphous Co-doped MoS x cocatalysts with a dominant CoMoS phase for solar H 2 evolution
An amorphous CoMoS x cocatalyst with a dominant “CoMoS” phase is synthesized via a citric acid-mediated in situ photochemical method, exhibiting superior activity toward dye-sensitized photocatalytic H 2 evolution by visible light.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
Citric acid-mediated in situ photochemical synthesis of amorphous Co-doped MoS x cocatalysts with a dominant CoMoS phase for solar H 2 evolution
An amorphous CoMoS x cocatalyst with a dominant “CoMoS” phase is synthesized via a citric acid-mediated in situ photochemical method, exhibiting superior activity toward dye-sensitized photocatalytic H 2 evolution by visible light.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
Engineering desert sand into self-standing electrodes via endogenous Fe-catalyzed in situ growth of N-doped carbon nanotubes for high-performance supercapacitors
Desert sand (DS) has been successfully engineered into a self-standing carbon-based electrode for supercapacitors with excellent capacitive performance and stability.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
Engineering desert sand into self-standing electrodes via endogenous Fe-catalyzed in situ growth of N-doped carbon nanotubes for high-performance supercapacitors
Desert sand (DS) has been successfully engineered into a self-standing carbon-based electrode for supercapacitors with excellent capacitive performance and stability.
- 19 September 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (39) , 22795-22801
Atomic engineering of trace endogenous Fe within natural clays into a self-supported Fe 1 –P single-atom cocatalyst for photocatalytic hydrogen evolution
The trace endogenous Fe species within natural halloysite nanotubes have been engineered into a single-atom Fe 1 –P cocatalyst with high H 2 evolution activity and stability in both dye-sensitized and semiconductor-based systems.
- 19 September 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (39) , 22795-22801
Atomic engineering of trace endogenous Fe within natural clays into a self-supported Fe 1 –P single-atom cocatalyst for photocatalytic hydrogen evolution
The trace endogenous Fe species within natural halloysite nanotubes have been engineered into a single-atom Fe 1 –P cocatalyst with high H 2 evolution activity and stability in both dye-sensitized and semiconductor-based systems.
- 28 August 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (20) , 5684-5696
Dense N-doped carbon nanotubes with encapsulated Fe nanoparticles directly grown within red brick as a sustainable monolithic electrode for high-performance supercapacitors
A monolithic electrode is developed by growing dense N-doped carbon nanotubes (NCNTs) embedded with Fe nanoparticles within a red brick substrate (Fe@NCNTs/RB) for supercapacitors with high areal capacitance, energy density, and cycling stability.
- 28 August 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (20) , 5684-5696
Dense N-doped carbon nanotubes with encapsulated Fe nanoparticles directly grown within red brick as a sustainable monolithic electrode for high-performance supercapacitors
A monolithic electrode is developed by growing dense N-doped carbon nanotubes (NCNTs) embedded with Fe nanoparticles within a red brick substrate (Fe@NCNTs/RB) for supercapacitors with high areal capacitance, energy density, and cycling stability.