Francisco Morales Sanchez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Francisco Morales Sanchez has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Francisco G. Benitez
Transportation Engineering, Faculty of Engineering, University of Seville, Camino de los Descubrimientos, s/n, 41092 Seville, Spain
4 shared publications Francisco G. Benitez
Transportation Engineering, Faculty of Engineering, University of Seville, Seville, Spain
3 shared publications- Luis M. Romero
Transportation Engineering, Faculty of Engineering, University of Seville, Seville, Spain
3 shared publications Antonio Reyes
Universidad de Sevilla, C/San Fernando 4, Sevilla 41004, Spain
2 shared publications- João Morgado
Infraestruturas de Portugal, S.A., 2809-013 Almada, Portugal
2 shared publications - Noelia Caceres
Transportation Engineering Unit, AICIA Seville, Spain
2 shared publications
Latest Publications
- 1 April 2019
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 134, 197-212
Influence of the rectifier mechanism in the performance of an inertial continuous variable transmission
- 1 April 2019
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 134, 197-212
Influence of the rectifier mechanism in the performance of an inertial continuous variable transmission
- Open Access
- 6 August 2018
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2672 (44) , 43-54
Automatic Prediction of Maintenance Intervention Types in Roads using Machine Learning and Historical Records
A methodology to support and automate the prediction of maintenance intervention alerts in transport linear-asset infrastructures can greatly aid maintenance planning and management. This paper proposes a methodology combining the current and predicted conditions of the assets, and unit components of the infrastructure, with operational and historical maintenance data, to derive information about maintenance interventions needed to avoid later severe degradation. By means of data analytics and machine learning techniques, the proposed methodology generates a prioritized listing, ranked on severity levels, corresponding to the pre-alerts and alerts generated for all assets of the transport infrastructure. The methodology is applied and tested in a real case consisting of a road network with different section classes. The analysis of the results shows that the algorithms and tools developed have good predicting capabilities.
- 6 August 2018
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2672 (44) , 43-54
Open AccessAutomatic Prediction of Maintenance Intervention Types in Roads using Machine Learning and Historical Records
A methodology to support and automate the prediction of maintenance intervention alerts in transport linear-asset infrastructures can greatly aid maintenance planning and management. This paper proposes a methodology combining the current and predicted conditions of the assets, and unit components of the infrastructure, with operational and historical maintenance data, to derive information about maintenance interventions needed to avoid later severe degradation. By means of data analytics and machine learning techniques, the proposed methodology generates a prioritized listing, ranked on severity levels, corresponding to the pre-alerts and alerts generated for all assets of the transport infrastructure. The methodology is applied and tested in a real case consisting of a road network with different section classes. The analysis of the results shows that the algorithms and tools developed have good predicting capabilities.
- Open Access
- 14 September 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 236 (1) , 012105
Improving linear transport infrastructure efficiency by automated learning and optimised predictive maintenance techniques (INFRALERT)
The on-going H2020 project INFRALERT aims to increase rail and road infrastructure capacity in the current framework of increased transportation demand by developing and deploying solutions to optimise maintenance interventions planning. It includes two real pilots for road and railways infrastructure. INFRALERT develops an ICT platform (the expert-based Infrastructure Management System, eIMS) which follows a modular approach including several expert-based toolkits. This paper presents the methodologies and preliminary results of the toolkits for i) nowcasting and forecasting of asset condition, ii) alert generation, iii) RAMS & LCC analysis and iv) decision support. The results of these toolkits in a meshed road network in Portugal under the jurisdiction of Infraestruturas de Portugal (IP) are presented showing the capabilities of the approaches.
- 14 September 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 236 (1) , 012105
Open AccessImproving linear transport infrastructure efficiency by automated learning and optimised predictive maintenance techniques (INFRALERT)
The on-going H2020 project INFRALERT aims to increase rail and road infrastructure capacity in the current framework of increased transportation demand by developing and deploying solutions to optimise maintenance interventions planning. It includes two real pilots for road and railways infrastructure. INFRALERT develops an ICT platform (the expert-based Infrastructure Management System, eIMS) which follows a modular approach including several expert-based toolkits. This paper presents the methodologies and preliminary results of the toolkits for i) nowcasting and forecasting of asset condition, ii) alert generation, iii) RAMS & LCC analysis and iv) decision support. The results of these toolkits in a meshed road network in Portugal under the jurisdiction of Infraestruturas de Portugal (IP) are presented showing the capabilities of the approaches.
- Open Access
- 14 September 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 236 (1) , 012107
Historical maintenance relevant information road-map for a self-learning maintenance prediction procedural approach
A large percentage of transport infrastructures are composed of linear assets, such as roads and rail tracks. The large social and economic relevance of these constructions force the stakeholders to ensure a prolonged health/durability. Even though, inevitable malfunctioning, breaking down, and out-of-service periods arise randomly during the life cycle of the infrastructure. Predictive maintenance techniques tend to diminish the appearance of unpredicted failures and the execution of needed corrective interventions, envisaging the adequate interventions to be conducted before failures show up. This communication presents: i) A procedural approach, to be conducted, in order to collect the relevant information regarding the evolving state condition of the assets involved in all maintenance interventions; this reported and stored information constitutes a rich historical data base to train Machine Learning algorithms in order to generate reliable predictions of the interventions to be carried out in further time scenarios. ii) A schematic flow chart of the automatic learning procedure. iii) Self-learning rules from automatic learning from false positive/negatives. The description, testing, automatic learning approach and the outcomes of a pilot case are presented; finally some conclusions are outlined regarding the methodology proposed for improving the self-learning predictive capability.
- 14 September 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 236 (1) , 012107
Open AccessHistorical maintenance relevant information road-map for a self-learning maintenance prediction procedural approach
A large percentage of transport infrastructures are composed of linear assets, such as roads and rail tracks. The large social and economic relevance of these constructions force the stakeholders to ensure a prolonged health/durability. Even though, inevitable malfunctioning, breaking down, and out-of-service periods arise randomly during the life cycle of the infrastructure. Predictive maintenance techniques tend to diminish the appearance of unpredicted failures and the execution of needed corrective interventions, envisaging the adequate interventions to be conducted before failures show up. This communication presents: i) A procedural approach, to be conducted, in order to collect the relevant information regarding the evolving state condition of the assets involved in all maintenance interventions; this reported and stored information constitutes a rich historical data base to train Machine Learning algorithms in order to generate reliable predictions of the interventions to be carried out in further time scenarios. ii) A schematic flow chart of the automatic learning procedure. iii) Self-learning rules from automatic learning from false positive/negatives. The description, testing, automatic learning approach and the outcomes of a pilot case are presented; finally some conclusions are outlined regarding the methodology proposed for improving the self-learning predictive capability.
- 13 March 2017
- Published by Springer Nature in Transportation
- Vol. 45 (5) , 1449-1473
Estimating traffic volumes on intercity road locations using roadway attributes, socioeconomic features and other work-related activity characteristics
- 13 March 2017
- Published by Springer Nature in Transportation
- Vol. 45 (5) , 1449-1473
Estimating traffic volumes on intercity road locations using roadway attributes, socioeconomic features and other work-related activity characteristics
- 1 April 2014
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
A Review of Dynamic CVT-IVT Transmissions
Currently, continuously variable transmission (CVT) is a topic of special interest as it allows the vehicle to have the engine working at its optimum regime (either minimum or maximum power consumption as required) remaining unaltered despite the changes in speed and the torque required on the drive wheels during operation.There is a particular group of CVTs with special characteristics: dynamic type CVTs. In these, in addition to acting on a control element, as in the rest of the kinematic type transmissions, the gear ratio also depends on the external conditions to which the transmission is subjected, that is, the transmission ratio is also determined by other variables such as the angular velocity of the input shaft and the load torque exerted on the output shaft.This paper reviews the most representative dynamic CVTs and torque converters (TCs) stating the basics of their functioning.The transmissions analyzed correspond to different patents, from one of the first [1] to the most recent [2,3] In addition, a brief description of each mechanism is given based on analytical and computational studies of the most interesting items, analyzing the advantages, disadvantages and deficiencies in the operation.Additionally, this review critically provides a warning regarding the pieces of information and working principles taken for granted.
- 1 April 2014
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
A Review of Dynamic CVT-IVT Transmissions
Currently, continuously variable transmission (CVT) is a topic of special interest as it allows the vehicle to have the engine working at its optimum regime (either minimum or maximum power consumption as required) remaining unaltered despite the changes in speed and the torque required on the drive wheels during operation.There is a particular group of CVTs with special characteristics: dynamic type CVTs. In these, in addition to acting on a control element, as in the rest of the kinematic type transmissions, the gear ratio also depends on the external conditions to which the transmission is subjected, that is, the transmission ratio is also determined by other variables such as the angular velocity of the input shaft and the load torque exerted on the output shaft.This paper reviews the most representative dynamic CVTs and torque converters (TCs) stating the basics of their functioning.The transmissions analyzed correspond to different patents, from one of the first [1] to the most recent [2,3] In addition, a brief description of each mechanism is given based on analytical and computational studies of the most interesting items, analyzing the advantages, disadvantages and deficiencies in the operation.Additionally, this review critically provides a warning regarding the pieces of information and working principles taken for granted.
- 1 April 2014
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Basic Conceptual Designs for Rectifiers of Inertial Transmissions
All inertial continuous/infinite variable transmissions (CVT-IVT) need of a rectifier. This is due to the fact that this type of CVT-IVTs should transform, in some way, the ratcheting motion into a unique direction of rotation in order to be transmitted to the kinematic chain of the vehicle transmission system. The choice of the rectifying system and the characteristics of the components heavily depend on the motion to be rectified and on the oscillating mechanism generator.The current rectifier systems included in inertial CVT-IVTs use freewheels to transform the oscillating movement. The use of freewheels has serious limitations for tourism and industrial vehicle applications, regarding the upper bounds of conforming to two working situations: i) high torque at low speed, and ii) high speed at a relatively low torque.The operation of this type of rectifier involves periods in which the outer track and inner track of the freewheels rotate in opposite directions, with the result that the relative velocity between tracks is twice the speed of the output shaft of the rectifier. This makes it difficult to find freewheels on the market that can withstand the rotational speeds to allow their application in the transmission system of a vehicle.Several rectifying system designs are proposed and, finally, analytical and numerical studies are tackled to identify the most applicable designs.
- 1 April 2014
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Basic Conceptual Designs for Rectifiers of Inertial Transmissions
All inertial continuous/infinite variable transmissions (CVT-IVT) need of a rectifier. This is due to the fact that this type of CVT-IVTs should transform, in some way, the ratcheting motion into a unique direction of rotation in order to be transmitted to the kinematic chain of the vehicle transmission system. The choice of the rectifying system and the characteristics of the components heavily depend on the motion to be rectified and on the oscillating mechanism generator.The current rectifier systems included in inertial CVT-IVTs use freewheels to transform the oscillating movement. The use of freewheels has serious limitations for tourism and industrial vehicle applications, regarding the upper bounds of conforming to two working situations: i) high torque at low speed, and ii) high speed at a relatively low torque.The operation of this type of rectifier involves periods in which the outer track and inner track of the freewheels rotate in opposite directions, with the result that the relative velocity between tracks is twice the speed of the output shaft of the rectifier. This makes it difficult to find freewheels on the market that can withstand the rotational speeds to allow their application in the transmission system of a vehicle.Several rectifying system designs are proposed and, finally, analytical and numerical studies are tackled to identify the most applicable designs.
- 1 January 2014
- Published by Inderscience Publishers in International Journal of Heavy Vehicle Systems
- Vol. 21 (1)
Problems in using individual X-by-wire cornering modules
This article discusses some mechanical problems which occur by using hub-motors and individual wheel steering on road vehicles. Several multi-body dynamic simulations have been done in order to illustrate the high reaction forces in the steering actuator. This paper is not about an individual steering or control per se but aims to analyse the different forces in a given steering system for different steering scenarios.
- 1 January 2014
- Published by Inderscience Publishers in International Journal of Heavy Vehicle Systems
- Vol. 21 (1)
Problems in using individual X-by-wire cornering modules
This article discusses some mechanical problems which occur by using hub-motors and individual wheel steering on road vehicles. Several multi-body dynamic simulations have been done in order to illustrate the high reaction forces in the steering actuator. This paper is not about an individual steering or control per se but aims to analyse the different forces in a given steering system for different steering scenarios.
- 30 April 2010
- Published by Wiley in Journal of Mechanical Design
- Vol. 132 (5) , 051004
Continuous Variable Transmission With an Inertia-Regulating System
This article describes a power transmission system applicable to vehicles. It consists of an oscillating, ratcheting-type, continuously variable transmission (CVT) system governed by an inertia mechanism. The inertia-regulating mechanism adds an additional degree of freedom and gives the system a dynamic character. The transmission consists of three different subsystems. The first of these converts the rotation of the engine or motor into an oscillating angular velocity movement and regulates the amplitude of this movement. The oscillating rotation from the first subsystem is used to drive a second subsystem, which acts as a regulating device by means of an inertial mechanism. The oscillating movement at the output of the second subsystem is rectified in the third, resulting in a unidirectional angular velocity. As a result, a unidirectional torque is generated at the output of the CVT, commensurate with the operating condition of the transmission, and this is capable of overcoming a torque resistance. A prototype of this transmission was built and tested to check the experimental results against those predicted by a series of computational simulations. As a result, the experimental graphs that characterize the operation of this type of transmission system were obtained, demonstrating its ability to function in an efficient manner.
- 30 April 2010
- Published by Wiley in Journal of Mechanical Design
- Vol. 132 (5) , 051004
Continuous Variable Transmission With an Inertia-Regulating System
This article describes a power transmission system applicable to vehicles. It consists of an oscillating, ratcheting-type, continuously variable transmission (CVT) system governed by an inertia mechanism. The inertia-regulating mechanism adds an additional degree of freedom and gives the system a dynamic character. The transmission consists of three different subsystems. The first of these converts the rotation of the engine or motor into an oscillating angular velocity movement and regulates the amplitude of this movement. The oscillating rotation from the first subsystem is used to drive a second subsystem, which acts as a regulating device by means of an inertial mechanism. The oscillating movement at the output of the second subsystem is rectified in the third, resulting in a unidirectional angular velocity. As a result, a unidirectional torque is generated at the output of the CVT, commensurate with the operating condition of the transmission, and this is capable of overcoming a torque resistance. A prototype of this transmission was built and tested to check the experimental results against those predicted by a series of computational simulations. As a result, the experimental graphs that characterize the operation of this type of transmission system were obtained, demonstrating its ability to function in an efficient manner.