Masahiro Koike
Masahiro Koike has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
Yuuichi Kamimuta
Corporate Research and Development Center 1 , Toshiba Corporation, 1, Komukai Toshiba-cho, Saiwai-ku, Kawasaki 212-8582, Japan
15 shared publicationsAkira Nishiyama
Toshiba Corporation Corporate Research & Development Center 1 Komukai Toshiba-cho, Saiwai-ku, Kawasaki 212-8582, Japan
10 shared publicationsMasato Koyama
Toshiba Corporation Corporate Research & Development Center 1 Komukai Toshiba-cho, Saiwai-ku, Kawasaki 212-8582, Japan
10 shared publicationsTsunehiro Ino
Toshiba Corporation Corporate Research & Development Center 1 Komukai Toshiba-cho, Saiwai-ku, Kawasaki 212-8582, Japan
9 shared publicationsY. Kamimuta
AIST (Japan)
9 shared publicationsTsutomu Tezuka
Corporate Research and Development Center 1 , Toshiba Corporation, 1, Komukai Toshiba-cho, Saiwai-ku, Kawasaki 212-8582, Japan
8 shared publications
Latest Publications
- Open Access
- 5 September 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (10) , 102104-99
Electrical properties of Ge crystals and effective Schottky barrier height of NiGe/Ge junctions modified by P and chalcogen (S, Se, or Te) co-doping
The electrical properties of Ge crystals and the effective Schottky barrier height (SBH) of NiGe/Ge diodes fabricated by P and/or chalcogen (S, Se, or Te) doping were investigated for Ge n-channel metal–oxide–semiconductor field-effect transistors with a NiGe/n+Ge junction. The electron concentration in Ge was increased more by co-doping with chalcogen and P than by doping with P alone. Moreover, SBH values were decreased in NiGe/nGe diodes and increased in NiGe/pGe diodes compared with undoped NiGe/Ge by both P doping and P and chalcogen co-doping. Co-doping with Te and P was most effective in modifying the SBH.
- 5 September 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (10) , 102104-99
Open AccessElectrical properties of Ge crystals and effective Schottky barrier height of NiGe/Ge junctions modified by P and chalcogen (S, Se, or Te) co-doping
The electrical properties of Ge crystals and the effective Schottky barrier height (SBH) of NiGe/Ge diodes fabricated by P and/or chalcogen (S, Se, or Te) doping were investigated for Ge n-channel metal–oxide–semiconductor field-effect transistors with a NiGe/n+Ge junction. The electron concentration in Ge was increased more by co-doping with chalcogen and P than by doping with P alone. Moreover, SBH values were decreased in NiGe/nGe diodes and increased in NiGe/pGe diodes compared with undoped NiGe/Ge by both P doping and P and chalcogen co-doping. Co-doping with Te and P was most effective in modifying the SBH.
- 25 September 2015
- Published by Japan Society of Applied Physics
Formation of Epitaxial Nickel Monogermanide on Ge(100) by Annealing of Ni/Sn Bilayer
2013 International Conference on Solid State Devices and Materials,Search for presentations
- 25 September 2015
- Published by Japan Society of Applied Physics
Formation of Epitaxial Nickel Monogermanide on Ge(100) by Annealing of Ni/Sn Bilayer
2013 International Conference on Solid State Devices and Materials,Search for presentations
- 1 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01631918,p. 16.6.1-16.6.4
High-performance tri-gate poly-Ge junction-less p- and n-MOSFETs fabricated by flash lamp annealing process
In order to realize high-performance stacking CMOS on insulator layers for 3D-LSIs, a technique for fabricating high-quality poly-crystalline Ge (poly-Ge) MOSFETs is mandatory. We employed the flash lamp annealing (FLA) method to grow high-quality poly-Ge by crystallization after melting an amorphous Ge layer. The Hall effect mobility of the p- and n-type poly-Ge film attained by the method was as high as 200 and 140 cm 2 /Vs. Tri-gate junction-less (JL) p- and nMOSFETs were successfully fabricated on the poly-Ge channels without channel doping. The p- and nMOSFET exhibited high drive currents of up to 311 and 119 μA/μm which were comparable to that of L g = 60 nm node c-Si pMOSFET, and the record value of poly-Si nMOSFET, respectively.
- 1 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01631918,p. 16.6.1-16.6.4
High-performance tri-gate poly-Ge junction-less p- and n-MOSFETs fabricated by flash lamp annealing process
In order to realize high-performance stacking CMOS on insulator layers for 3D-LSIs, a technique for fabricating high-quality poly-crystalline Ge (poly-Ge) MOSFETs is mandatory. We employed the flash lamp annealing (FLA) method to grow high-quality poly-Ge by crystallization after melting an amorphous Ge layer. The Hall effect mobility of the p- and n-type poly-Ge film attained by the method was as high as 200 and 140 cm 2 /Vs. Tri-gate junction-less (JL) p- and nMOSFETs were successfully fabricated on the poly-Ge channels without channel doping. The p- and nMOSFET exhibited high drive currents of up to 311 and 119 μA/μm which were comparable to that of L g = 60 nm node c-Si pMOSFET, and the record value of poly-Si nMOSFET, respectively.
- 7 August 2014
- Published by The Electrochemical Society in ECS Transactions
- Vol. 64 (11) , 135-147
(Invited) Ge-on-Insulator MOSFETs for High-Performance and 3D-LSI Applications
Ge-on-insulator (GeOI) MOSFET structures are advantageous to suppress off-state current levels while keeping the high-performance originated from the high electron and hole mobility. On the other hand, the low thermal budget of the fabrication processes could provide another opportunity for Ge devices. Sequentially stackable COMS devices may be a possible application for 3D-LSIs. In this paper, electrical properties and processes of strained Ge nanowire pMOSFETs and strained GeOI nMOSFETs for high performance applications are presented. Ultra-high hole mobility of over 1900 cm2/Vs and 4-times enhancement of the nMOSFET drive current are demonstrated for the p- and nMOSFETs, respectively. Poly-Ge trigate p- and nFETs on buried oxide (SiO2) layers are also presented for 3D-LSIs. Reasonable operation of sub-100 nm devices and improvement of the current drivability are demonstrated.
- 7 August 2014
- Published by The Electrochemical Society in ECS Transactions
- Vol. 64 (11) , 135-147
(Invited) Ge-on-Insulator MOSFETs for High-Performance and 3D-LSI Applications
Ge-on-insulator (GeOI) MOSFET structures are advantageous to suppress off-state current levels while keeping the high-performance originated from the high electron and hole mobility. On the other hand, the low thermal budget of the fabrication processes could provide another opportunity for Ge devices. Sequentially stackable COMS devices may be a possible application for 3D-LSIs. In this paper, electrical properties and processes of strained Ge nanowire pMOSFETs and strained GeOI nMOSFETs for high performance applications are presented. Ultra-high hole mobility of over 1900 cm2/Vs and 4-times enhancement of the nMOSFET drive current are demonstrated for the p- and nMOSFETs, respectively. Poly-Ge trigate p- and nFETs on buried oxide (SiO2) layers are also presented for 3D-LSIs. Reasonable operation of sub-100 nm devices and improvement of the current drivability are demonstrated.
- 10 April 2014
- Published by IOP Publishing in Applied Physics Express
- Vol. 7 (5) , 051302
NiGe/n+-Ge junctions with ultralow contact resistivity formed by two-step P-ion implantation
- 10 April 2014
- Published by IOP Publishing in Applied Physics Express
- Vol. 7 (5) , 051302
NiGe/n+-Ge junctions with ultralow contact resistivity formed by two-step P-ion implantation
- 21 January 2013
- Published by AIP Publishing in Applied Physics Letters
- Vol. 102 (3) , 032108
Modulation of NiGe/Ge Schottky barrier height by S and P co-introduction
The profiles and current-voltage characteristics of phosphorus (P)- and/or sulfur (S)-introduced Ge and NiGe/Ge have been investigated to clarify the mechanism of Schottky barrier height (SBH) modulation. For NiGe/nGe (NiGe/pGe), the introduction of P and the co-introduction of P and S effectively reduced (increased) SBH, which is explained by the properties of S acting as an n-type dopant with deep donor levels in Ge. In modulating the SBH, the co-introduction was the most effective. It is probably related to the fact that a higher increase in electron concentrations was observed in S and P co-introduced Ge than in P-introduced Ge.
- 21 January 2013
- Published by AIP Publishing in Applied Physics Letters
- Vol. 102 (3) , 032108
Modulation of NiGe/Ge Schottky barrier height by S and P co-introduction
The profiles and current-voltage characteristics of phosphorus (P)- and/or sulfur (S)-introduced Ge and NiGe/Ge have been investigated to clarify the mechanism of Schottky barrier height (SBH) modulation. For NiGe/nGe (NiGe/pGe), the introduction of P and the co-introduction of P and S effectively reduced (increased) SBH, which is explained by the properties of S acting as an n-type dopant with deep donor levels in Ge. In modulating the SBH, the co-introduction was the most effective. It is probably related to the fact that a higher increase in electron concentrations was observed in S and P co-introduced Ge than in P-introduced Ge.
- 27 September 2012
- Published by Japan Society of Applied Physics
Comparative Study of Schottky Barrier Height Modulation in S-introduced NiGe/Ge and NiSi/Si Junctions
2012 International Conference on Solid State Devices and Materials,Search for presentations
- 27 September 2012
- Published by Japan Society of Applied Physics
Comparative Study of Schottky Barrier Height Modulation in S-introduced NiGe/Ge and NiSi/Si Junctions
2012 International Conference on Solid State Devices and Materials,Search for presentations
- 1 May 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 222-225
Schottky barrier height modulation of NiGe/Ge junction by P and chalcogen (S, Se, or Te) co-introduction for metal source/drain Ge nMOSFETs
The profiles and J-V characteristics of P- and/or chalcogen (S, Se, or Te)-introduced Ge substrates and NiGe/Ge diodes have been investigated for a Ge nMOSFET with a NiGe source/drain. We found that chalcogen and P co-introduction caused a greater increase in the number of electrons in Ge than only P introduction. Moreover, P introduction and P and chalcogen co-introduction resulted in lower (higher) Schottky barrier height (SBH) values for NiGe/nGe (NiGe/pGe) diodes than no impurity introduction. Te and P co-introduction was most effective in modulating the SBH.
- 1 May 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 222-225
Schottky barrier height modulation of NiGe/Ge junction by P and chalcogen (S, Se, or Te) co-introduction for metal source/drain Ge nMOSFETs
The profiles and J-V characteristics of P- and/or chalcogen (S, Se, or Te)-introduced Ge substrates and NiGe/Ge diodes have been investigated for a Ge nMOSFET with a NiGe source/drain. We found that chalcogen and P co-introduction caused a greater increase in the number of electrons in Ge than only P introduction. Moreover, P introduction and P and chalcogen co-introduction resulted in lower (higher) Schottky barrier height (SBH) values for NiGe/nGe (NiGe/pGe) diodes than no impurity introduction. Te and P co-introduction was most effective in modulating the SBH.
- 13 February 2012
- Published by AIP Publishing in Applied Physics Letters
- Vol. 100 (7) , 072902
Tunneling current modulation by Ge incorporation into Si oxide films for flash memory applications
Current-voltage characteristic for a Ge-incorporated Si oxide was investigated. Current enhancement was observed for the electric field larger than 10 MV/cm. Such a current enhancement only under high electric field is expected to improve programming performance without deteriorating reading performance. From secondary ion mass spectrometry and hard x-ray photoelectron spectroscopy analyses and current simulation, it is concluded that the Ge impurity in Ge4+ state around the tunnel oxide/substrate interface enhances the current by trap-assisted tunneling. The programming current enhancement induced by the Ge incorporation is expected to be one of the promising solutions for the next-generation flash memory.
- 13 February 2012
- Published by AIP Publishing in Applied Physics Letters
- Vol. 100 (7) , 072902
Tunneling current modulation by Ge incorporation into Si oxide films for flash memory applications
Current-voltage characteristic for a Ge-incorporated Si oxide was investigated. Current enhancement was observed for the electric field larger than 10 MV/cm. Such a current enhancement only under high electric field is expected to improve programming performance without deteriorating reading performance. From secondary ion mass spectrometry and hard x-ray photoelectron spectroscopy analyses and current simulation, it is concluded that the Ge impurity in Ge4+ state around the tunnel oxide/substrate interface enhances the current by trap-assisted tunneling. The programming current enhancement induced by the Ge incorporation is expected to be one of the promising solutions for the next-generation flash memory.