Catalina Mansilla
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Catalina Mansilla has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Tom Wirtz
Luxembourg Institute of Science and Technology
10 shared publications - Jeff. Th. M. De Hosson
Department of Applied Physics, Zernike Institute for Advanced Materials, University of Groningen, 9747AG Groningen, The Netherlands
6 shared publications - Agustin Rodriguez Gonzalez-Elipe
Nanotechnology on Surfaces and Plasma Lab. Materials Science Institute of Seville, Consejo Superior de Investigaciones Científicas (CSIC - Univ. Sevilla), Americo Vespucio 49, 41092 Sevilla, Spain
5 shared publications - Francisco Yubero
Instituto de Ciencia de Materiales de Sevilla, CSIC-Universidad de Sevilla
5 shared publications - Juan Pedro Espinos
Spanish National Research Council
5 shared publications - Juan Pedro Holgado
Instituto de Ciencia de Materials de Sevilla and Departamento de Quimica Inorganica, CSIC-University of Sevilla, Seville, Spain
5 shared publications
Latest Publications
- 1 December 2018
- Published by Elsevier in Science and Technology of Materials
- Vol. 30, 60-68
Development of antimicrobial leather modified with Ag–TiO2 nanoparticles for footwear industry
- 1 December 2018
- Published by Elsevier in Science and Technology of Materials
- Vol. 30, 60-68
Development of antimicrobial leather modified with Ag–TiO2 nanoparticles for footwear industry
- 1 January 2018
- Published by Elsevier in Surface and Coatings Technology
- Vol. 334, 105-115
Influence of magnetron sputtering conditions on the chemical bonding, structural, morphological and optical behavior of Ta1−xOx coatings
- 1 January 2018
- Published by Elsevier in Surface and Coatings Technology
- Vol. 334, 105-115
Influence of magnetron sputtering conditions on the chemical bonding, structural, morphological and optical behavior of Ta1−xOx coatings
- 22 August 2017
- Published by IOP Publishing in Nanotechnology
- Vol. 28 (37) , 375302
Comparison of Pd electron beam induced deposition using two precursors and an oxygen purification strategy
Focused electron beam induced deposition (FEBID) allows the creation of nanoscale structures through dissociation of an organo-metallic precursor by electrons at the beam impact point. The deposition of Pd can be interesting for its catalytic behavior and ability to contact carbon based materials. Two precursors were investigated—Pd(hfac) 2 and (Cp)Pd(allyl)—and two deposition methods: with and without an in situ oxygen purification process. The deposition parameters can be tuned for the Pd(hfac) 2 precursor to provide a deposition with 23 ± 2 at.% of Pd and a main component of C at 51 ± 3 at.% and minor components of O and F. An in situ purification process using O 2 was much faster than expected and improved the Pd content to up to >65 at.% while reducing the C to ∼20 at.%, and avoiding the oxidation of Pd. The resistivity was ∼100 μ Ohm · cm and compares favorably with a bulk value of 10 μ Ohm · cm. The (Cp)Pd(allyl) precursor is interesting because it does not release fluorine during the deposition and hence it does not etch a possible substrate. Its FEBID deposition had a composition of 26 ± 5 at.% of Pd with 74 ± 5 at.% of C. The O 2 purification process can improve the Pd content up to ∼60 at.% while reducing C to μ Ohm · cm, although better values can be anticipated for longer post treatment times.
- 22 August 2017
- Published by IOP Publishing in Nanotechnology
- Vol. 28 (37) , 375302
Comparison of Pd electron beam induced deposition using two precursors and an oxygen purification strategy
Focused electron beam induced deposition (FEBID) allows the creation of nanoscale structures through dissociation of an organo-metallic precursor by electrons at the beam impact point. The deposition of Pd can be interesting for its catalytic behavior and ability to contact carbon based materials. Two precursors were investigated—Pd(hfac) 2 and (Cp)Pd(allyl)—and two deposition methods: with and without an in situ oxygen purification process. The deposition parameters can be tuned for the Pd(hfac) 2 precursor to provide a deposition with 23 ± 2 at.% of Pd and a main component of C at 51 ± 3 at.% and minor components of O and F. An in situ purification process using O 2 was much faster than expected and improved the Pd content to up to >65 at.% while reducing the C to ∼20 at.%, and avoiding the oxidation of Pd. The resistivity was ∼100 μ Ohm · cm and compares favorably with a bulk value of 10 μ Ohm · cm. The (Cp)Pd(allyl) precursor is interesting because it does not release fluorine during the deposition and hence it does not etch a possible substrate. Its FEBID deposition had a composition of 26 ± 5 at.% of Pd with 74 ± 5 at.% of C. The O 2 purification process can improve the Pd content up to ∼60 at.% while reducing C to μ Ohm · cm, although better values can be anticipated for longer post treatment times.
- 2 September 2016
- Published by IOP Publishing in Nanotechnology
- Vol. 27 (41) , 415301
Towards a single step process to create high purity gold structures by electron beam induced deposition at room temperature
Highly pure metallic structures can be deposited by electron beam induced deposition and they have many important applications in different fields. The organo-metallic precursor is decomposed and deposited under the electron beam, and typically it is purified with post-irradiation in presence of O 2 . However, this approach limits the purification to the surface of the deposit. Therefore, ‘ in situ ’ purification during deposition using simultaneous flows of both O 2 and precursor in parallel with two gas injector needles has been tested and verified. To simplify the practical arrangements, a special concentric nozzle has been designed allowing deposition and purification performed together in a single step. With this new device metallic structures with high purity can be obtained more easily, while there is no limit on the height of the structures within a practical time frame. In this work, we summarize the first results obtained for ‘ in situ ’ Au purification using this concentric nozzle, which is described in more detail, including flow simulations. The operational parameter space is explored in order to optimize the shape as well as the purity of the deposits, which are evaluated through scanning electron microscope and energy dispersive x-ray spectroscopy measurements, respectively. The observed variations are interpreted in relation to other variables, such as the deposition yield. The resistivity of purified lines is also measured, and the influence of additional post treatments as a last purification step is studied.
- 2 September 2016
- Published by IOP Publishing in Nanotechnology
- Vol. 27 (41) , 415301
Towards a single step process to create high purity gold structures by electron beam induced deposition at room temperature
Highly pure metallic structures can be deposited by electron beam induced deposition and they have many important applications in different fields. The organo-metallic precursor is decomposed and deposited under the electron beam, and typically it is purified with post-irradiation in presence of O 2 . However, this approach limits the purification to the surface of the deposit. Therefore, ‘ in situ ’ purification during deposition using simultaneous flows of both O 2 and precursor in parallel with two gas injector needles has been tested and verified. To simplify the practical arrangements, a special concentric nozzle has been designed allowing deposition and purification performed together in a single step. With this new device metallic structures with high purity can be obtained more easily, while there is no limit on the height of the structures within a practical time frame. In this work, we summarize the first results obtained for ‘ in situ ’ Au purification using this concentric nozzle, which is described in more detail, including flow simulations. The operational parameter space is explored in order to optimize the shape as well as the purity of the deposits, which are evaluated through scanning electron microscope and energy dispersive x-ray spectroscopy measurements, respectively. The observed variations are interpreted in relation to other variables, such as the deposition yield. The resistivity of purified lines is also measured, and the influence of additional post treatments as a last purification step is studied.
- 4 July 2015
- Published by Springer Nature in Journal of Applied Phycology
- Vol. 28 (2) , 1097-1110
On the 3D reconstruction of diatom frustules: a novel method, applications, and limitations
- 4 July 2015
- Published by Springer Nature in Journal of Applied Phycology
- Vol. 28 (2) , 1097-1110
On the 3D reconstruction of diatom frustules: a novel method, applications, and limitations
- 18 June 2015
- Published by Pleiades Publishing Ltd in Russian Journal of Electrochemistry
- Vol. 51 (6) , 495-502
Influence of deposition conditions on electrical and mechanical properties of Sm2O3-doped CeO2 thin films prepared by EB-PVD (+IBAD) methods. Relationship between investigated film and substrate at indentation
The study of polycrystalline CeO2 + xSm2O3 (x = 0, 10.9–15.9 mol %) thin films deposited by Electron Beam Physical Vapour Deposition (EB-PVD) and Ionic Beam Assisted Deposition (IBAD) techniques on the Si substrate was devoted to the influence of deposition conditions used, namely composition x, deposition temperature T dep and Ar+ ion bombardment as well as the structure and (micro)structure on the (micro)hardness H using the differential hardness, Hdif, as a parameter. The investigations were made using, as in our recent papers, the depth sensing indentation (DSI) technique. The study was focused on the depth dependence of the film/substrate system response on the indentation response from the surface of films up to the film/substrate interface. This study has shown that the critical indentation depth, where the influence of substrate is negligible, can be observed for some CeO2 films doped with Sm2O3 as well as for undoped CeO2 films, both deposited at Tdep = 200°C without IBAD as well as using IBAD. Besides it, a wavy character of differential curve due to the inhomogeneities of films was observed with good reproducibility at some films. It was proven, that the method of differential hardness measurement is applicable for the determination of critical indentation depth as well as for the study of microstructure response of thin films from the film surface up to the film/substrate interface. Results of this study are described and discussed.
- 18 June 2015
- Published by Pleiades Publishing Ltd in Russian Journal of Electrochemistry
- Vol. 51 (6) , 495-502
Influence of deposition conditions on electrical and mechanical properties of Sm2O3-doped CeO2 thin films prepared by EB-PVD (+IBAD) methods. Relationship between investigated film and substrate at indentation
The study of polycrystalline CeO2 + xSm2O3 (x = 0, 10.9–15.9 mol %) thin films deposited by Electron Beam Physical Vapour Deposition (EB-PVD) and Ionic Beam Assisted Deposition (IBAD) techniques on the Si substrate was devoted to the influence of deposition conditions used, namely composition x, deposition temperature T dep and Ar+ ion bombardment as well as the structure and (micro)structure on the (micro)hardness H using the differential hardness, Hdif, as a parameter. The investigations were made using, as in our recent papers, the depth sensing indentation (DSI) technique. The study was focused on the depth dependence of the film/substrate system response on the indentation response from the surface of films up to the film/substrate interface. This study has shown that the critical indentation depth, where the influence of substrate is negligible, can be observed for some CeO2 films doped with Sm2O3 as well as for undoped CeO2 films, both deposited at Tdep = 200°C without IBAD as well as using IBAD. Besides it, a wavy character of differential curve due to the inhomogeneities of films was observed with good reproducibility at some films. It was proven, that the method of differential hardness measurement is applicable for the determination of critical indentation depth as well as for the study of microstructure response of thin films from the film surface up to the film/substrate interface. Results of this study are described and discussed.
- 1 June 2015
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 636, 476-483
Local residual stress measurements on nitride layers
- 1 June 2015
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 636, 476-483
Local residual stress measurements on nitride layers
- Open Access
- 5 March 2015
- Published by Springer Nature in Journal of Materials Science
- Vol. 50 (10) , 3646-3655
On the determination of local residual stress gradients by the slit milling method
- 5 March 2015
- Published by Springer Nature in Journal of Materials Science
- Vol. 50 (10) , 3646-3655
Open AccessOn the determination of local residual stress gradients by the slit milling method
- 1 January 2015
- Published by Elsevier in Ultramicroscopy
- Vol. 148, 31-41
Calibration-free quantitative surface topography reconstruction in scanning electron microscopy
- 1 January 2015
- Published by Elsevier in Ultramicroscopy
- Vol. 148, 31-41
Calibration-free quantitative surface topography reconstruction in scanning electron microscopy
- 1 August 2014
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 20 (6) , 1625-1637
A New Methodology to Analyze Instabilities in SEM Imaging
This paper presents a statistical method to analyze instabilities that can be introduced during imaging in scanning electron microscopy (SEM). The method is based on the correlation of digital images and it can be used at different length scales. It consists of the evaluation of three different approaches with four parameters in total. The methodology is exemplified with a specific case of internal stress measurements where ion milling and SEM imaging are combined with digital image correlation. It is concluded that before these measurements it is important to test the SEM column to ensure the minimization and randomization of the imaging instabilities. The method has been applied onto three different field emission gun SEMs (Philips XL30, Tescan Lyra, FEI Helios 650) that represent three successive generations of SEMs. Important to note that the imaging instability can be quantified and its source can be identified.
- 1 August 2014
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 20 (6) , 1625-1637
A New Methodology to Analyze Instabilities in SEM Imaging
This paper presents a statistical method to analyze instabilities that can be introduced during imaging in scanning electron microscopy (SEM). The method is based on the correlation of digital images and it can be used at different length scales. It consists of the evaluation of three different approaches with four parameters in total. The methodology is exemplified with a specific case of internal stress measurements where ion milling and SEM imaging are combined with digital image correlation. It is concluded that before these measurements it is important to test the SEM column to ensure the minimization and randomization of the imaging instabilities. The method has been applied onto three different field emission gun SEMs (Philips XL30, Tescan Lyra, FEI Helios 650) that represent three successive generations of SEMs. Important to note that the imaging instability can be quantified and its source can be identified.