Cleiton Antonio Wartha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cleiton Antonio Wartha has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Alberto Cargnelutti Filho
ADepartment of Plant Science, Federal University of Santa Maria (UFSM), Santa Maria, RS, Brazil
8 shared publications - Aaron Joel Lorenz
Department of Agronomy and Plant Genetics University of Minnesota St. Paul Minnesota USA
5 shared publications - Diego Nicolau Follmann
Universidade Federal de Santa Maria
5 shared publications - Rafael Vieira Pezzini
Universidade Federal de Santa Maria, Brazil
4 shared publications - Jéssica Andiara Kleinpaul
Universidade Federal de Santa Maria, Brazil
3 shared publications M. Caraffa
Departamento de Agronomia, Sociedade Educacional Três de Maio, Três de Maio, RS, Brasil
3 shared publications
Latest Publications
- Open Access
- 11 December 2025
- Published by Wiley in The Plant Genome
- Vol. 18 (4) , e70150
GS4PB: An R Shiny application to facilitate a genomic selection pipeline for plant breeding
The implementation of genomics‐assisted breeding methodologies is helping to drive the genetic gain required to meet the grand challenge of producing more food using fewer resources in the face of a changing climate. Despite the documented usefulness of genomics‐assisted breeding toward this end, its full infusion into most small‐ and medium‐sized breeding programs is still incomplete. One major reason for limited routine application of genomic selection among most such programs is the lack of a single integrated software tool capable of assisting breeders throughout the entire genomic prediction pipeline. To help address this need, we have implemented a streamlined genomic prediction and selection pipeline designed for plant breeding programs using open‐source tools. The steps implemented in the pipeline include processing genotypic data (e.g., filtering and imputing genotypic data), merging genotypic and phenotypic data, collecting enviromics covariates, estimating environmental kinship, optimizing training sets, cross‐validating genomic prediction models, and implementing genomic prediction for single or multiple traits across single or multiple environments. Herein, we describe an R Shiny web application named “GS4PB” (Genomic Selection For Plant Breeding) that implements the above steps in the pipeline and discuss the rationale for each of the tools in the pipeline. We used this GS4PB application to conduct an experiment comparing phenotypic and genomic selection, and showed genomic selection worked as well as phenotypic selection for advancement of breeding lines. This publicly available analysis tool will help to lower entry barriers into advanced techniques of genomic prediction, enabling breeders to take advantage of these technologies to help drive genetic gain.
- 11 December 2025
- Published by Wiley in The Plant Genome
- Vol. 18 (4) , e70150
Open AccessGS4PB: An R Shiny application to facilitate a genomic selection pipeline for plant breeding
The implementation of genomics‐assisted breeding methodologies is helping to drive the genetic gain required to meet the grand challenge of producing more food using fewer resources in the face of a changing climate. Despite the documented usefulness of genomics‐assisted breeding toward this end, its full infusion into most small‐ and medium‐sized breeding programs is still incomplete. One major reason for limited routine application of genomic selection among most such programs is the lack of a single integrated software tool capable of assisting breeders throughout the entire genomic prediction pipeline. To help address this need, we have implemented a streamlined genomic prediction and selection pipeline designed for plant breeding programs using open‐source tools. The steps implemented in the pipeline include processing genotypic data (e.g., filtering and imputing genotypic data), merging genotypic and phenotypic data, collecting enviromics covariates, estimating environmental kinship, optimizing training sets, cross‐validating genomic prediction models, and implementing genomic prediction for single or multiple traits across single or multiple environments. Herein, we describe an R Shiny web application named “GS4PB” (Genomic Selection For Plant Breeding) that implements the above steps in the pipeline and discuss the rationale for each of the tools in the pipeline. We used this GS4PB application to conduct an experiment comparing phenotypic and genomic selection, and showed genomic selection worked as well as phenotypic selection for advancement of breeding lines. This publicly available analysis tool will help to lower entry barriers into advanced techniques of genomic prediction, enabling breeders to take advantage of these technologies to help drive genetic gain.
- Open Access
- 29 August 2025
- Published by Wiley in Crop Science
- Vol. 65 (5)
Genomic analysis and predictive modeling in the Northern Uniform Soybean Tests
The Northern Uniform Soybean Tests (NUST) are a regional field trial network coordinated by the United States Department of Agriculture to evaluate experimental soybean ( Glycine max L.) strains developed by public institutions. Historical data from the NUST compiled, curated, and reported herein comprise a valuable multi‐environment trial dataset including relevant elite soybean germplasm from maturity groups 00 to IV evaluated over 28 years in 199 locations, totaling 1652 environments. Our aim was to characterize the genetic structure of the NUST experimental strains, perform genome‐wide association studies using historical phenotypic data, and assess the usefulness of these historical data for genomic prediction model training. Molecular marker information was collected on 2544 unique NUST experimental strains using the BARCSoySNP6K assay. High fixation index values between early and later maturity groups were observed in a region on chromosome 10 near the known soybean maturity gene E2 . We failed to find strong genetic divergence between strains from different breeding programs, reflecting the germplasm sharing common among public programs. Genome‐wide association analyses on important agronomic traits identified marker‐trait associations, many of which overlap with quantitative trait loci previously reported in the literature. Genomic prediction models trained using the historical NUST data produced moderate to high predictive abilities in most cases, suggesting these data could make useful contributions to training sets. We have made these data publicly available as a data resource for others to study genotype–phenotype relationships within elite public soybean germplasm and develop predictive models for advancement and implementation of genomics‐assisted breeding.
- 29 August 2025
- Published by Wiley in Crop Science
- Vol. 65 (5)
Open AccessGenomic analysis and predictive modeling in the Northern Uniform Soybean Tests
The Northern Uniform Soybean Tests (NUST) are a regional field trial network coordinated by the United States Department of Agriculture to evaluate experimental soybean ( Glycine max L.) strains developed by public institutions. Historical data from the NUST compiled, curated, and reported herein comprise a valuable multi‐environment trial dataset including relevant elite soybean germplasm from maturity groups 00 to IV evaluated over 28 years in 199 locations, totaling 1652 environments. Our aim was to characterize the genetic structure of the NUST experimental strains, perform genome‐wide association studies using historical phenotypic data, and assess the usefulness of these historical data for genomic prediction model training. Molecular marker information was collected on 2544 unique NUST experimental strains using the BARCSoySNP6K assay. High fixation index values between early and later maturity groups were observed in a region on chromosome 10 near the known soybean maturity gene E2 . We failed to find strong genetic divergence between strains from different breeding programs, reflecting the germplasm sharing common among public programs. Genome‐wide association analyses on important agronomic traits identified marker‐trait associations, many of which overlap with quantitative trait loci previously reported in the literature. Genomic prediction models trained using the historical NUST data produced moderate to high predictive abilities in most cases, suggesting these data could make useful contributions to training sets. We have made these data publicly available as a data resource for others to study genotype–phenotype relationships within elite public soybean germplasm and develop predictive models for advancement and implementation of genomics‐assisted breeding.
- Open Access
- 21 April 2025
- Published by Wiley
GS4PB: An R/Shiny Application to Facilitate a Genomic Selection Pipeline for Plant Breeding
The implementation of genomics-assisted breeding methodologies is helping to drive the genetic gain required to meet the grand challenge of producing more food using fewer resources in the face of a changing climate. Despite the documented usefulness of genomics-assisted breeding toward this end, its full infusion into most small- and medium-sized breeding programs is still incomplete. Several challenges and constraints impede adoption by such organizations, including cost of genotyping, rapid turnaround time, and availability of trained personnel. One major reason for limited routine application of genomic selection among most such programs is a lack of single integrated software tools capable of assisting breeders throughout the entire genomic prediction pipeline. To address some of these challenges, we have implemented a streamlined genomic prediction and selection pipeline designed for plant breeding programs using open-source tools. The steps implemented in the pipeline include processing genotypic data (e.g., filtering and imputing genotypic data), merging genotypic and phenotypic data, collecting enviromics covariates, estimating environmental kinship, optimizing training sets, cross-validating genomic prediction models, and implementing genomic prediction for single and multiple traits across single or multiple environments. Herein, we describe an R Shiny web application named “GS4PB” that implements the above steps in the pipeline and discuss the rationale for each of the tools in the pipeline. This publicly available analysis tool will help to lower entry barriers into advanced techniques of genomic prediction, enabling breeders to take advantage of these technologies to help drive genetic gain.
- 21 April 2025
- Published by Wiley
Open AccessGS4PB: An R/Shiny Application to Facilitate a Genomic Selection Pipeline for Plant Breeding
The implementation of genomics-assisted breeding methodologies is helping to drive the genetic gain required to meet the grand challenge of producing more food using fewer resources in the face of a changing climate. Despite the documented usefulness of genomics-assisted breeding toward this end, its full infusion into most small- and medium-sized breeding programs is still incomplete. Several challenges and constraints impede adoption by such organizations, including cost of genotyping, rapid turnaround time, and availability of trained personnel. One major reason for limited routine application of genomic selection among most such programs is a lack of single integrated software tools capable of assisting breeders throughout the entire genomic prediction pipeline. To address some of these challenges, we have implemented a streamlined genomic prediction and selection pipeline designed for plant breeding programs using open-source tools. The steps implemented in the pipeline include processing genotypic data (e.g., filtering and imputing genotypic data), merging genotypic and phenotypic data, collecting enviromics covariates, estimating environmental kinship, optimizing training sets, cross-validating genomic prediction models, and implementing genomic prediction for single and multiple traits across single or multiple environments. Herein, we describe an R Shiny web application named “GS4PB” that implements the above steps in the pipeline and discuss the rationale for each of the tools in the pipeline. This publicly available analysis tool will help to lower entry barriers into advanced techniques of genomic prediction, enabling breeders to take advantage of these technologies to help drive genetic gain.
- Open Access
- 12 July 2024
- Published by Springer Nature in Heredity
- Vol. 133 (3) , 173-185
Genomic predictions of genetic variances and correlations among traits for breeding crosses in soybean
Parental selection is perhaps the most critical decision a breeder makes, establishing the foundation of the entire program for years to come. Cross selection based on predicted mean and genetic variance can be further expanded to multiple-trait improvement by predicting the genetic correlation ( $${r}_{G}$$ ) between pairs of traits. Our objective was to empirically assess the ability to predict the family mean, genetic variance, superior progeny mean and genetic correlation through genomic prediction in a soybean population. Data made available through the Soybean Nested Association Mapping project included phenotypic data on seven traits (days to maturity, lodging, oil, plant height, protein, seed size, and seed yield) for 39 families. Training population composition followed a leave-one-family-out cross-validation scheme, with the validation family genetic parameters predicted using the remaining families as the training set. The predictive abilities for family mean and superior progeny mean were significant for all traits while predictive ability of genetic variance was significant for four traits. We were able to validate significant predictive abilities of $${r}_{G}$$ for 18 out of 21 (86%) pairwise trait combinations (P < 0.05). The findings from this study support the use of genome-wide marker effects for predicting $${r}_{G}$$ in soybean biparental crosses. If successfully implemented in breeding programs, this methodology could help to increase the rate of genetic gain for multiple correlated traits.- 12 July 2024
- Published by Springer Nature in Heredity
- Vol. 133 (3) , 173-185
Open AccessGenomic predictions of genetic variances and correlations among traits for breeding crosses in soybean
Parental selection is perhaps the most critical decision a breeder makes, establishing the foundation of the entire program for years to come. Cross selection based on predicted mean and genetic variance can be further expanded to multiple-trait improvement by predicting the genetic correlation ( $${r}_{G}$$ ) between pairs of traits. Our objective was to empirically assess the ability to predict the family mean, genetic variance, superior progeny mean and genetic correlation through genomic prediction in a soybean population. Data made available through the Soybean Nested Association Mapping project included phenotypic data on seven traits (days to maturity, lodging, oil, plant height, protein, seed size, and seed yield) for 39 families. Training population composition followed a leave-one-family-out cross-validation scheme, with the validation family genetic parameters predicted using the remaining families as the training set. The predictive abilities for family mean and superior progeny mean were significant for all traits while predictive ability of genetic variance was significant for four traits. We were able to validate significant predictive abilities of $${r}_{G}$$ for 18 out of 21 (86%) pairwise trait combinations (P < 0.05). The findings from this study support the use of genome-wide marker effects for predicting $${r}_{G}$$ in soybean biparental crosses. If successfully implemented in breeding programs, this methodology could help to increase the rate of genetic gain for multiple correlated traits. - Open Access
- 20 September 2023
- Published by Springer Nature in Research Square
Genomic Predictions of Genetic Variances and Correlations Among Traits: Empirical Validation within the Soybean Nested Association Mapping Population
Parental selection is perhaps the most critical decision a breeder makes, establishing the foundation of the entire program for years to come. Cross selection based on predicted mean and genetic variance can be further expanded to multiple-trait improvement by predicting the genetic correlation (r_G) between pairs of traits. Genetic correlation among traits is caused by pleiotropy or linkage. Unfavorable correlations due to linkage can be disrupted by successive recombination events. Increased multi-trait genetic gain could be obtained by selecting parental combinations with a desirable mean, greater genetic variance, and more favorable r_G. The accuracy of predicting r_G of soybean breeding crosses using genome-wide markers remains unexplored. Our objective was to empirically measure the ability to predict the family mean, genetic variance, superior progeny mean and genetic correlation. Thirty-nine validation families that differed in their estimated mean and variance were evaluated for days to maturity, lodging, oil, plant height, protein, seed size, and seed yield in multi-environment trials. Training population composition followed a leave-one-family-out cross-validation scheme, with the validation family genetic parameters predicted using the remaining families as the training set. The predictive abilities for family mean and superior progeny mean were significant for all traits while predictive ability of genetic variance was significant for four traits. We were able to validate significant predictive abilities of r_G for 17 out of 21 (80%) pairwise trait combinations (P < 0.05; bootstrapping). The findings from this study support the use of genome-wide marker effects for predicting r_G in soybean biparental crosses.
- 20 September 2023
- Published by Springer Nature in Research Square
Open AccessGenomic Predictions of Genetic Variances and Correlations Among Traits: Empirical Validation within the Soybean Nested Association Mapping Population
Parental selection is perhaps the most critical decision a breeder makes, establishing the foundation of the entire program for years to come. Cross selection based on predicted mean and genetic variance can be further expanded to multiple-trait improvement by predicting the genetic correlation (r_G) between pairs of traits. Genetic correlation among traits is caused by pleiotropy or linkage. Unfavorable correlations due to linkage can be disrupted by successive recombination events. Increased multi-trait genetic gain could be obtained by selecting parental combinations with a desirable mean, greater genetic variance, and more favorable r_G. The accuracy of predicting r_G of soybean breeding crosses using genome-wide markers remains unexplored. Our objective was to empirically measure the ability to predict the family mean, genetic variance, superior progeny mean and genetic correlation. Thirty-nine validation families that differed in their estimated mean and variance were evaluated for days to maturity, lodging, oil, plant height, protein, seed size, and seed yield in multi-environment trials. Training population composition followed a leave-one-family-out cross-validation scheme, with the validation family genetic parameters predicted using the remaining families as the training set. The predictive abilities for family mean and superior progeny mean were significant for all traits while predictive ability of genetic variance was significant for four traits. We were able to validate significant predictive abilities of r_G for 17 out of 21 (80%) pairwise trait combinations (P < 0.05; bootstrapping). The findings from this study support the use of genome-wide marker effects for predicting r_G in soybean biparental crosses.
- 7 April 2022
- Published by Elsevier in Phytochemistry
- Vol. 199, 113175
Classification of sugarcane genotypes susceptible and resistant to the initial attack of sugarcane borer Diatraea saccharalis using epicuticular wax composition
- 7 April 2022
- Published by Elsevier in Phytochemistry
- Vol. 199, 113175
Classification of sugarcane genotypes susceptible and resistant to the initial attack of sugarcane borer Diatraea saccharalis using epicuticular wax composition
- Open Access
- 1 June 2018
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 77 (2) , 212-220
Plot size related to numbers of treatments and replications, and experimental precision in dwarf pigeon pea
The aim of this study was to determine the optimum plot size to evaluate the fresh matter of aerial part of dwarf pigeon pea (Cajanus cajan (L.) Millsp), cultivar IAPAR 43 (Aratã), in scenarios formed by combinations of numbers of treatments, number of replications, and precision levels. The fresh matter of aerial part was weighed on basic experimental units of 1 m × 1 m in three uniformity trials with size of 24 m × 12 m (288 m2 in each trial). The soil heterogeneity index of Smith was estimated. Also, the optimum plot size was determined by Hatheway’s method in scenarios formed by combinations of i treatments (i = 5, 10, 15, and 20), r replications (r = 3, 4, 5, 6, 7 8, 9, and 10), and d precision levels (d = 5%, 10%, 15%, 20%, 25%, and 30%). In experiments designed on randomized block design with 5 to 20 treatments and four replications, plots with 9 m2 were enough to identify significant differences among treatments regarding the fresh matter of aerial part in dwarf pigeon pea at 5% probability of 30% of the experiment overall mean.
- 1 June 2018
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 77 (2) , 212-220
Open AccessPlot size related to numbers of treatments and replications, and experimental precision in dwarf pigeon pea
The aim of this study was to determine the optimum plot size to evaluate the fresh matter of aerial part of dwarf pigeon pea (Cajanus cajan (L.) Millsp), cultivar IAPAR 43 (Aratã), in scenarios formed by combinations of numbers of treatments, number of replications, and precision levels. The fresh matter of aerial part was weighed on basic experimental units of 1 m × 1 m in three uniformity trials with size of 24 m × 12 m (288 m2 in each trial). The soil heterogeneity index of Smith was estimated. Also, the optimum plot size was determined by Hatheway’s method in scenarios formed by combinations of i treatments (i = 5, 10, 15, and 20), r replications (r = 3, 4, 5, 6, 7 8, 9, and 10), and d precision levels (d = 5%, 10%, 15%, 20%, 25%, and 30%). In experiments designed on randomized block design with 5 to 20 treatments and four replications, plots with 9 m2 were enough to identify significant differences among treatments regarding the fresh matter of aerial part in dwarf pigeon pea at 5% probability of 30% of the experiment overall mean.
- Open Access
- 1 June 2018
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 77 (2) , 221-229
Models for leaf area estimation in dwarf pigeon pea by leaf dimensions
This study aims to determine the most suitable model to estimate the leaf area of dwarf pigeon pea in function of the leaf central leaflet dimension. Six samplings of 200 leaves were performed in the first experiment, at 36, 42, 50, 56, 64, and 72 days after emergence (DAE). In the second experiment, seven samplings of 200 leaves were performed at 29, 36, 43, 49, 57, 65, and 70 DAE, totaling 2600 leaves. The length (L) and width (W) of the central leaflet were measured in all leaves composed by left, central, and right leaflets, the product of length times width (LW) was calculated, and the leaf area (Y – sum of left, central, and right leaflet areas) was determined by digital images. Linear, power, quadratic, and cubic models of Y as function of L, W, and LW were built using data from the second experiment. Leaves from the first experiment were used to validate the models. In dwarf pigeon pea, the linear (Ŷ = – 0.4088 + 1.6669x, R2 = 0.9790) is preferable, but power (Ŷ = 1.6097x1.0065, R2 = 0.9766), quadratic (Ŷ = – 0.3625 + 1.663x + 0.00007x2, R2 = 0.9790), and cubic (Ŷ = 0.7216 + 1.522x + 0.005x2 – 5E–05x3, R2 = 0.9791) models in function of LW are also suitable to estimate the leaf area obtained by digital images. The power model (Ŷ = 5.2508x1.7868, R2 = 0.95) based on the central leaflet width is less laborious because requires only one variable, but it presents accuracy reduction.
- 1 June 2018
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 77 (2) , 221-229
Open AccessModels for leaf area estimation in dwarf pigeon pea by leaf dimensions
This study aims to determine the most suitable model to estimate the leaf area of dwarf pigeon pea in function of the leaf central leaflet dimension. Six samplings of 200 leaves were performed in the first experiment, at 36, 42, 50, 56, 64, and 72 days after emergence (DAE). In the second experiment, seven samplings of 200 leaves were performed at 29, 36, 43, 49, 57, 65, and 70 DAE, totaling 2600 leaves. The length (L) and width (W) of the central leaflet were measured in all leaves composed by left, central, and right leaflets, the product of length times width (LW) was calculated, and the leaf area (Y – sum of left, central, and right leaflet areas) was determined by digital images. Linear, power, quadratic, and cubic models of Y as function of L, W, and LW were built using data from the second experiment. Leaves from the first experiment were used to validate the models. In dwarf pigeon pea, the linear (Ŷ = – 0.4088 + 1.6669x, R2 = 0.9790) is preferable, but power (Ŷ = 1.6097x1.0065, R2 = 0.9766), quadratic (Ŷ = – 0.3625 + 1.663x + 0.00007x2, R2 = 0.9790), and cubic (Ŷ = 0.7216 + 1.522x + 0.005x2 – 5E–05x3, R2 = 0.9791) models in function of LW are also suitable to estimate the leaf area obtained by digital images. The power model (Ŷ = 5.2508x1.7868, R2 = 0.95) based on the central leaflet width is less laborious because requires only one variable, but it presents accuracy reduction.
- Open Access
- 1 April 2017
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 76 (2) , 178-188
Plot size and number of repetitions in vetch
The objectives of this work were to determine the optimum plot size and number of repetitions to evaluate the fresh matter weight of vetch (Vicia sativa L.) in sowing densities. Fortyeight uniformity trials of 6 m × 6 m were conducted. Sixteen trials were evaluated in each sowing density (40, 60, and 80 kg∙ha−1). Each trial was divided into 36 basic experimental units (BEU) of 1 m × 1 m, totaling 1,728 BEU. In each BEU, the fresh matter was weighed. The optimum plot size was determined by the method of maximum curvature of the coefficient of variation model. The means were compared among sowing densities by the Scott-Knott’s test. The number of repetitions — for experiments with completely randomized and randomized block designs, in scenarios of i treatments (i = 3, 4, …, 50) and d minimal differences between treatments means being detected as significant with 5% probability by Tukey’s test, expressed in percentage of the experiment average (d = 10%, 11%, …, 20%), was determined by iterative process until convergence. The optimum plot size to evaluate the fresh matter weight of vetch is 4.52 m2 at the 3 sowing densities. Four repetitions, to evaluate up to 50 treatments, in completely randomized and randomized block designs, are enough to identify as significant, at 5% probability by Tukey’s test, differences between treatment means of 29.15% of the experiment average.
- 1 April 2017
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 76 (2) , 178-188
Open AccessPlot size and number of repetitions in vetch
The objectives of this work were to determine the optimum plot size and number of repetitions to evaluate the fresh matter weight of vetch (Vicia sativa L.) in sowing densities. Fortyeight uniformity trials of 6 m × 6 m were conducted. Sixteen trials were evaluated in each sowing density (40, 60, and 80 kg∙ha−1). Each trial was divided into 36 basic experimental units (BEU) of 1 m × 1 m, totaling 1,728 BEU. In each BEU, the fresh matter was weighed. The optimum plot size was determined by the method of maximum curvature of the coefficient of variation model. The means were compared among sowing densities by the Scott-Knott’s test. The number of repetitions — for experiments with completely randomized and randomized block designs, in scenarios of i treatments (i = 3, 4, …, 50) and d minimal differences between treatments means being detected as significant with 5% probability by Tukey’s test, expressed in percentage of the experiment average (d = 10%, 11%, …, 20%), was determined by iterative process until convergence. The optimum plot size to evaluate the fresh matter weight of vetch is 4.52 m2 at the 3 sowing densities. Four repetitions, to evaluate up to 50 treatments, in completely randomized and randomized block designs, are enough to identify as significant, at 5% probability by Tukey’s test, differences between treatment means of 29.15% of the experiment average.
- Open Access
- 30 January 2017
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 76 (1) , 73-81
Phyllochron and leaf appearance rate in oat
Phyllochron and leaf appearance rate are both important parameters in the production efficiency of agricultural crops. The objectives of this study were to determine the phyllochron and leaf appearance rate in 4 oat cultivars (Avena sativa L.) in 3 sowing dates and verify the variability of phyllochron and leaf appearance rate among cultivars and sowing dates. The experimental design was the completely randomized with 12 treatments and 20 repetitions. Treatments were formed by the combination of 4 cultivars (URS Charrua, URS Taura, URS Estampa, and URS Corona) and 3 sowing dates in 2014 (April 28, May 28, and July 14). In each plant (repetition) of each treatment, the number of expanded leaves (NEL) was counted 3 times per week from the first leaf emission until flowering. For each plant, cultivar, and sowing date, linear regression was adjusted between NEL and accumulated thermal time (ATT) and between NEL and number of days after emergence (DAE). Phyllochron was determined by the inverse of the angular coefficient of the linear regression between the NEL and ATT. The leaf appearance rate was determined by the inverse of the angular coefficient of the linear regression between NEL and DAE. In oat, there is variability of phyllochron and leaf appearance rate among cultivars and sowing dates. Phyllochron oscillates between 95.88 and 117.70 °C day∙leaf−1 and leaf appearance rate, between 6.41 and 9.65 days∙leaf−1. The oat cropping management in function of phyllochron and leaf appearance rate is dependent on cultivars and sowing dates.
- 30 January 2017
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 76 (1) , 73-81
Open AccessPhyllochron and leaf appearance rate in oat
Phyllochron and leaf appearance rate are both important parameters in the production efficiency of agricultural crops. The objectives of this study were to determine the phyllochron and leaf appearance rate in 4 oat cultivars (Avena sativa L.) in 3 sowing dates and verify the variability of phyllochron and leaf appearance rate among cultivars and sowing dates. The experimental design was the completely randomized with 12 treatments and 20 repetitions. Treatments were formed by the combination of 4 cultivars (URS Charrua, URS Taura, URS Estampa, and URS Corona) and 3 sowing dates in 2014 (April 28, May 28, and July 14). In each plant (repetition) of each treatment, the number of expanded leaves (NEL) was counted 3 times per week from the first leaf emission until flowering. For each plant, cultivar, and sowing date, linear regression was adjusted between NEL and accumulated thermal time (ATT) and between NEL and number of days after emergence (DAE). Phyllochron was determined by the inverse of the angular coefficient of the linear regression between the NEL and ATT. The leaf appearance rate was determined by the inverse of the angular coefficient of the linear regression between NEL and DAE. In oat, there is variability of phyllochron and leaf appearance rate among cultivars and sowing dates. Phyllochron oscillates between 95.88 and 117.70 °C day∙leaf−1 and leaf appearance rate, between 6.41 and 9.65 days∙leaf−1. The oat cropping management in function of phyllochron and leaf appearance rate is dependent on cultivars and sowing dates.