Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nicu Doinel Scarisoreanu has a total of 95 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Dopant-Specific Surface Redox and Work-Function Tuning in Pr-, Dy-, and Ho-Modified α-MoO₃ Thin Films

    by Asma Nezzari, M’HAmed Guezzoul, Marian Zamfirescu, Farid Bennabi, Hadjer Herir, Petronela Garoi, Katherine Jejen, Francisco Palazon, Nicu Doinel Scarisoreanu, Bouhalouane Amrani, et al.

  • Open Access

    Multifunctional Properties of Nickel Nanoparticles Produced by Laser Ablation in Liquid

    by Alexandru-Mihai Iamandi, Daniel-Liviu Ghiculescu, Gabriela Huminic, Angel Huminic, Ioan Mihail Ghițiu, Nicu Doinel ScărișOreanu

    This study explores the multifunctional properties of Ni nanoparticles obtained by laser ablation in liquid, with emphasis on the potential use of these nanoparticles in different applications such as cooling fluids or photoelectrochemical ones. The Ni nanoparticles were synthesized by the laser ablation in liquid technique using an Nd-YAG laser and ultrapure water as liquid. The structural, dimensional, morphologic, and stoichiometric characterizations of the nanoparticles were performed using different techniques such as transmission electron microscopy (TEM), energy dispersive X-ray (EDS) and dynamic light scattering spectroscopy (DLS). Nickel nanoparticles with sizes ranging from 5 to 15 nm in diameter were obtained. The experimental measurements were performed to determine the thermal conductivity and viscosity of the obtained nanofluids, essential parameters in the evaluation of the cooling fluid performances. Loading TiO2 thin films with Ni nanoparticles led to the enhancement of the photoelectrochemical water splitting properties of TiO2 thin films, the Ni nanoparticles acting on the collecting, transferring and separating the photogenerated charges and ultimately improving the overall anodic and cathodic efficiencies. The results obtained can contribute to the development of innovative, multifunctional solutions based on non-precious metals for cooling and water splitting systems used in industrial, electronics and other applications.

  • Open Access

    Chemoresistive Metal Oxide-Based Sensors Synthesized Through Physical Vapor Deposition Techniques for Gas Detection

    by Andrei-Silviu Zancu, Mihai Robert Zamfir, Nicolae Cristian Mihailescu, Constantin Pintilie, Nicu Doinel ScărișOreanu

    In our day-to-day lives, we are regularly exposed to a wide spectrum of dangerous gases. Their origins vary, ranging from industrial activities to objects found within our very homes. Naturally, there is an interest in developing cost-efficient and durable devices that can successfully track these gases within our environment. One such candidate is represented by chemoresistive gas sensors based on metal oxides. This is due to their simple architecture and the possibility of scaling down their size, making them valid contenders for future advancements in portable gas sensors. This review focuses on chemoresistive gas sensors that have been obtained through different Physical Vapor Deposition (PVD) methods, which are easily scalable for potential technological transfer towards commercialization or are already exploited at the industrial level, and how varying different deposition parameters impacts the structure of the active material, thus modifying the gas sensing properties of the device. In this review, we report results obtained for different metal oxides: WO3, ZnO, CeO2, TiO2, NiO, and SnO2. The main findings of these studies revealed that the sensor’s response was highly impacted by oxygen deficiencies within the deposited material, the specific surface area, and the thickness of the film. Moreover, this study also delves into different strategies of functionalization that result in improved gas sensing properties. Thus, we herein report how tailoring functional properties modifies the gas sensing performance of different metal oxides.


  • Open Access

    Laser-Engineered Co/Cu Multilayers by Pulsed Laser Deposition: Interfacial Control, Spin-Dependent Transport, and Enhanced Giant Magnetoresistance

    by Cătălin-Daniel Constantinescu, Eros-Alexandru Pătroi, Nicu-Doinel ScărișOreanu, Antoniu-Nicolae Moldovan, Anca-Gabriela Nedelcea, Cătălin-Romeo Luculescu, Cosmin Cobianu, Maria-Cătălina Petrescu, Lucian-Gabriel Petrescu

    Cobalt/copper (Co/Cu) multilayers are prototypical systems for giant magnetoresistance (GMR)-based spintronic devices, where interfacial quality and spin-dependent scattering critically determine performance. In this work, Co/Cu multilayers were fabricated by pulsed laser deposition (PLD) on SITAL ceramics, Si(100), and BK7 substrates, with 10, 20, and 40 bilayer repetitions, in order to elucidate the interplay between microstructure, interfacial diffusion, and magnetotransport properties. Systematic characterization combining atomic force microscopy (AFM), scanning electron microscopy (SEM), SIMS/SNMS depth profiling, vibrating sample magnetometry (VSM), and Hall effect measurements reveals that PLD enables controlled multilayer growth with low background roughness and well-defined periodic structures, despite the presence of characteristic particulates. A clear dependence of the GMR response on both bilayer number and substrate type is observed. Increasing the number of repetitions enhances spin-dependent scattering at Co/Cu interfaces, leading to a progressive increase in the magnetoresistance amplitude, reaching ~−14% for 40-period multilayers on SITAL substrates. This enhancement is attributed to the higher interface density and improved interfacial coherence, as confirmed by SIMS/SNMS analysis showing reduced interdiffusion in thicker stacks. In parallel, Hall effect measurements indicate a reduction in carrier density and an increase in carrier mobility with increasing multilayer thickness, consistent with improved charge transport stability. A pronounced substrate effect is demonstrated: SITAL-supported multilayers exhibit enhanced GMR sensitivity (up to ~44%·T−1) due to increased diffuse spin-dependent scattering at rougher interfaces, whereas Si(100) substrates promote smoother growth, improved structural coherence, and more stable electronic transport. While sputtering typically enables smoother interfaces and higher GMR ratios, PLD offers enhanced flexibility in tailoring interfacial morphology and diffusion processes, which can lead to improved sensitivity under specific conditions. These results establish PLD as a versatile route for tailoring Co/Cu multilayers, enabling controlled optimization of the trade-off between sensitivity and structural quality for advanced spin-valve and magnetic sensor applications.

  • Open Access

    Metal Oxide Thin Films for Advanced Photonic Applications

    by Maria-Luiza Stîngescu, Mihai-Adrian Șopronyi, Ștefan Antohe, Nicu-Doinel ScărișOreanu

    Oxide materials represent a versatile and fundamental platform for photonics, allowing the manipulation of light through optical property engineering. This review focuses mainly on the physics and applications of simple oxides, analysing their use in the realisation of dielectric mirrors, in particular of distributed Bragg reflectors, and planar microcavities. Critical aspects regarding the design of multilayer structures, the control of optical confinement and the improvement of the quality factor in passive devices are discussed. However, to provide a complete picture of the evolution of the field, the section dedicated to oxide materials anticipates future directions dominated by complex oxides such as lithium niobate, lithium tantalate and barium titanate required for active photonics. In this context, a necessary technological paradigm shift is highlighted: the transition from the current use of film-on-insulator platforms to the direct epitaxial growth of these functional materials, an essential step for the scalability and monolithic integration of future photonic devices.


  • Open Access

    Large-Area Pulsed Laser Deposition Growth of Transparent Conductive Al-Doped ZnO Thin Films

    by Elena Isabela Bancu, Valentin Ion, Mihai Adrian Sopronyi, Stefan Antohe, Nicu Doinel Scarisoreanu

    High-quality AZO thin films were produced on a 4-inch Si substrate using large-area PLD equipment at a substrate temperature of 330 °C, with a ZnO: Al (98:2 wt.%) target. This study aims to enhance the electrical, optical, morphological and structural properties of large-area PLD-grown AZO thin films by tuning the deposition pressures. The samples were prepared under high-vacuum (HV) conditions, as well as in oxygen atmospheres of 0.005 mbar O2, 0.01 mbar O2, and 0.1 mbar O2. Consequently, a bilayer AZO film was prepared in a combination of two deposition pressures (first layer prepared under HV, followed by the second layer prepared at 0.01 mbar O2). Additionally, morphological and structural characterization revealed that high-quality columnar growth AZO thin films free of droplets, with a strong (002) orientation, were achieved on a 4-inch Si substrate. Moreover, Hall measurements in the Van der Pauw configuration were used to assess the electrical properties. A low electrical resistivity of 3.98 × 10−4 Ω cm, combined with a high carrier concentration (n) of 1.05 × 1021 cm−3 and a charge carrier mobility of 17.9 cm2/V s, was achieved at room temperature for the sample prepared under HV conditions. The optical characterization conducted through spectroscopic ellipsometry measurements showed that the large-area AZO sample exhibits an increased optical transparency in the visible (VIS) range with a near-zero extinction coefficient (k) and a wide bandgap of 3.75 eV, fulfilling the standards for materials classified as TCO. In addition, the increased thickness uniformity of the prepared AZO films over a large area represents a significant step in scaling the PLD technique for industrial applications.


  • Open Access

    Towards AZO Thin Films for Electronic and Optoelectronic Large-Scale Applications

    by Elena Isabela Bancu, Valentin Ion, Stefan Antohe, Nicu Doinel Scarisoreanu

    Transparent conductive oxides (TCOs) have become essential components in a broad range of modern devices, including smartphones, flat-panel displays, and photovoltaic cells. Currently, indium tin oxide (ITO) is used in approximately 90% of these devices. However, ITO prices continue to rise due to the limited supply of indium (In), making the development of alternative materials for TCOs indispensable. Therefore, this study highlights the latest advances in creating new, affordable materials, with a focus on aluminum-doped zinc oxide (AZO). Over the last few decades, this material has been widely studied to improve its physical properties, particularly its low electrical resistivity, which can affect the performance of various devices. Now, it is close to replacing ITO due to several advantages including cost-effectiveness, stability under hydrogen plasma, low processing temperatures, and lack of toxicity. Besides that, in comparison to other TCOs such as IZO, IGZO, or IZrO, AZO achieved a low electrical resistivity (10−5 ohm cm) while maintaining a high transparency across the visible spectrum (over 85%). Additionally, due to the increasing development of technologies utilizing such materials, it is essential to develop more effective techniques for producing TCOs on a larger scale. Additionally, due to the increasing development of technologies utilizing such materials, it is essential to develop more effective techniques for producing TCOs on a larger scale. This review emphasizes the potential of AZO as a cost-effective and scalable alternative to ITO, highlighting key advancements in deposition techniques such as pulsed laser deposition (PLD).


  • Open Access

    Non-invasive detection of a deeply buried two-dimensional electron gas at the LaFeO3/SrTiO3 interface via Giant top interdigital capacitance

    by Ioan M. Ghitiu, Mihai Zamfir, Elena I. Bancu, Floriana Craciun, Maria Dinescu, Nicu D. Scarisoreanu

  • Open Access

    Tailoring the Functional Properties of Ferroelectric Perovskite Thin Films: Mechanisms of Dielectric and Photoelectrochemical Enhancement

    by Ioan-Mihail Ghitiu, George Alexandru Nemnes, Nicu Doinel Scarisoreanu

    Various types of strain, as well as chemical pressure induced by dopants, can effectively tailor the performance of perovskite thin films, including their optical, electrical or photoelectrochemical properties. The control of these functional properties through such engineering techniques is key to fulfilling the application-specific requirements of ferroelectric devices in various fields. Numerous models and experimental data have been published on this subject, especially on ferrite-based ferroelectric materials. Within this paper, the mechanisms of tuning ferroelectric intrinsic properties, such as polarization and ferroelectric domain configurations, through epitaxial strain and doping, as well as the role of these techniques in influencing functional properties such as dielectric and photoelectrochemical ones, are presented. This review examines the significant improvements in dielectric properties and photoelectrochemical efficiency achieved by the strategical control of key functionalities including dielectric losses, domain structures, charge separation and surface reactions in strained/doped ferroelectric thin films, highlighting the advancements and research progress made in this field in recent years.


  • Open Access

    Strain engineering of epitaxial perovskite-type LaFeO3/ BiFeO3 heterostructures for photoelectrochemical water splitting

    by Florin Andrei, Valentin Ion, Ruxandra Birjega, Ioan Ghitiu, Mihai Zamfir, Antoniu Moldovan, Valentin Serban Teodorescu, Maria Dinescu, Ioan-Cezar Marcu, Nicu Doinel Scarisoreanu