Pieter Tack
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pieter Tack has a total of 458 co-authors. Here are the top co-authors by number of shared publications:
Laszlo Vincze
27 shared publications- Ella De Pauw
X-ray Microspectroscopy and Imaging Group, Department of Chemistry, Ghent University, Krijgslaan 281, B-9000 Ghent, Belgium
10 shared publications Jan Garrevoet
Deutsches Elektronen-Synchrotron DESY, Notkestr. 85,Hamburg 22607, Germany
10 shared publicationsBart Vekemans
Department of Chemistry, Ghent University, Ghent, Belgium
9 shared publications- Stephen Bauters
European Synchrotron Radiation Facility (ESRF), Helmholtz-Zentrum Dresden-Rossendorf CRG-Beamline, Grenoble Cedex 9, France
9 shared publications - Frank Eric Brenker
Schwiete Cosmochemistry Laboratory, Goethe University, Frankfurt, Germany
7 shared publications
Latest Publications
- Open Access
- 29 October 2026
- Published by Wiley in Meteoritics & Planetary Science
Distribution and rare earth element abundances of apatite in Bennu samples determined by synchrotron X‐ray fluorescence spectroscopy
Apatite is often the most rare earth element (REE)‐enriched mineral in chondritic meteorites. REE enrichment and fractionation levels in apatite grains can give insight into the aqueous fluids in which they formed and the conditions prevailing within the host body. In this study, we applied synchrotron X‐ray fluorescence (SXRF) spectroscopy to investigate the distribution and REE enrichments of 34 apatite grains in five rock fragments from asteroid (101955) Bennu, collected and brought to Earth by NASA's OSIRIS‐REx mission. We observe a strongly heterogeneous apatite distribution with frequent occurrence of clusters containing three to nine apatite grains. SXRF results reveal a wide grain‐to‐grain range of REE enrichment levels, at 15–900 times those of bulk CI chondrites. Of the 34 measured apatite grains, four are Mn‐enriched (Mn > 1.26 wt%) and these show the lowest REE concentrations (15–65 times CI). Little light/heavy REE fractionation is observed in the Bennu apatite grains, in contrast to the heavy REE enrichment observed in apatite grains in samples from asteroid Ryugu. Our results suggest fluid circulation in Bennu's parent asteroid involved apatite precipitation in cavities and local variations in water‐rock interaction leading to local changes in , and fluid chemistry. Given the dynamically evolving fluid conditions and the enhanced peripheral luminescence and oscillatory zoning observed in some apatite grains, an absence of REE fractionation during apatite formation appears unlikely. We postulate that, as fluid chemistry evolved to higher alkalinity and salinity, sequential complexation resulted in early incorporation of light REEs into precipitating apatite grains, subsequently balanced by later adsorption of heavy REEs.
- 29 October 2026
- Published by Wiley in Meteoritics & Planetary Science
Open AccessDistribution and rare earth element abundances of apatite in Bennu samples determined by synchrotron X‐ray fluorescence spectroscopy
Apatite is often the most rare earth element (REE)‐enriched mineral in chondritic meteorites. REE enrichment and fractionation levels in apatite grains can give insight into the aqueous fluids in which they formed and the conditions prevailing within the host body. In this study, we applied synchrotron X‐ray fluorescence (SXRF) spectroscopy to investigate the distribution and REE enrichments of 34 apatite grains in five rock fragments from asteroid (101955) Bennu, collected and brought to Earth by NASA's OSIRIS‐REx mission. We observe a strongly heterogeneous apatite distribution with frequent occurrence of clusters containing three to nine apatite grains. SXRF results reveal a wide grain‐to‐grain range of REE enrichment levels, at 15–900 times those of bulk CI chondrites. Of the 34 measured apatite grains, four are Mn‐enriched (Mn > 1.26 wt%) and these show the lowest REE concentrations (15–65 times CI). Little light/heavy REE fractionation is observed in the Bennu apatite grains, in contrast to the heavy REE enrichment observed in apatite grains in samples from asteroid Ryugu. Our results suggest fluid circulation in Bennu's parent asteroid involved apatite precipitation in cavities and local variations in water‐rock interaction leading to local changes in , and fluid chemistry. Given the dynamically evolving fluid conditions and the enhanced peripheral luminescence and oscillatory zoning observed in some apatite grains, an absence of REE fractionation during apatite formation appears unlikely. We postulate that, as fluid chemistry evolved to higher alkalinity and salinity, sequential complexation resulted in early incorporation of light REEs into precipitating apatite grains, subsequently balanced by later adsorption of heavy REEs.
- Open Access
- 13 October 2026
- Published by Elsevier in SSRN Electronic Journal
Adsorption of selenium oxyanions on schwertmannite: Mechanistic insights, adsorbent regeneration, and potential for selenium recovery
Selenium (Se) contamination can cause serious harm to aquatic ecosystems, and its soluble oxyanions can be difficult to remove from complex wastewater matrices containing competing anions. This study evaluates schwertmannite, a Fe(III) oxyhydroxysulfate that can be chemically synthesized or naturally formed in acid mine drainage, as a potentially low-cost adsorbent for Se remediation. Its structural sulfate (SO42-) provides an ion-exchange pathway for selenium oxyanions distinct from the surface-complexation mechanisms typically observed for other iron oxides. Unlike biological reduction, it does not require anoxic operation or continuous electron-donor addition. Biogenic and chemically synthesized schwertmannite were compared for Se uptake, and the higher-performing synthetic material was investigated using isotherms, kinetics, and X-ray absorption spectroscopy to elucidate mechanisms of Se(IV) and Se(VI) adsorption. Model-estimated maximum capacities at pH 3 were 192 mg g⁻¹ for Se(IV) and 112 mg g⁻¹ for Se(VI), based on the Langmuir–Freundlich model. Adsorption was pH-dependent and affected by phosphate and sulfate. Se(VI) was more susceptible to sulfate interference, whereas Se(IV) removal remained high at 30 mM sulfate. Mechanistic analyses indicated that both oxyanions displaced exchangeable outer-sphere sulfate, while Se(IV) additionally formed inner-sphere complexes. Regeneration with 0.1 M NaOH at pH 13 achieved near-complete desorption, while a dilute sulfuric acid wash sustained high adsorption efficiencies across cycles by replenishing exchangeable sulfate. Desorption into a regenerant volume 20-fold smaller enabled Se up-concentration, yielding eluates containing approximately 0.80 g L⁻¹ Se(IV) and 0.56 g L⁻¹ Se(VI). These findings support schwertmannite as a regenerable adsorbent for Se removal and recovery.
- 13 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAdsorption of selenium oxyanions on schwertmannite: Mechanistic insights, adsorbent regeneration, and potential for selenium recovery
Selenium (Se) contamination can cause serious harm to aquatic ecosystems, and its soluble oxyanions can be difficult to remove from complex wastewater matrices containing competing anions. This study evaluates schwertmannite, a Fe(III) oxyhydroxysulfate that can be chemically synthesized or naturally formed in acid mine drainage, as a potentially low-cost adsorbent for Se remediation. Its structural sulfate (SO42-) provides an ion-exchange pathway for selenium oxyanions distinct from the surface-complexation mechanisms typically observed for other iron oxides. Unlike biological reduction, it does not require anoxic operation or continuous electron-donor addition. Biogenic and chemically synthesized schwertmannite were compared for Se uptake, and the higher-performing synthetic material was investigated using isotherms, kinetics, and X-ray absorption spectroscopy to elucidate mechanisms of Se(IV) and Se(VI) adsorption. Model-estimated maximum capacities at pH 3 were 192 mg g⁻¹ for Se(IV) and 112 mg g⁻¹ for Se(VI), based on the Langmuir–Freundlich model. Adsorption was pH-dependent and affected by phosphate and sulfate. Se(VI) was more susceptible to sulfate interference, whereas Se(IV) removal remained high at 30 mM sulfate. Mechanistic analyses indicated that both oxyanions displaced exchangeable outer-sphere sulfate, while Se(IV) additionally formed inner-sphere complexes. Regeneration with 0.1 M NaOH at pH 13 achieved near-complete desorption, while a dilute sulfuric acid wash sustained high adsorption efficiencies across cycles by replenishing exchangeable sulfate. Desorption into a regenerant volume 20-fold smaller enabled Se up-concentration, yielding eluates containing approximately 0.80 g L⁻¹ Se(IV) and 0.56 g L⁻¹ Se(VI). These findings support schwertmannite as a regenerable adsorbent for Se removal and recovery.
- 24 October 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (43) , 23905-23913
The Hyphenation of High-Performance Liquid Chromatography with X-ray Fluorescence for Universal, Flow-Through, Elemental Analysis of Organobromines
Current detectors used in liquid chromatography are still lacking in what is desired of an ideal detector. One of those characteristics is the universal response. In this work, the novel use of X-ray fluorescence as a complementary, flow-through, universal detector was developed in hyphenation with reversed-phase chromatography. Monte Carlo simulations were performed to aid in the creation of the HPLC-XRF setup and study the influence of parameters involved. A proof of principle was established for the analysis of organobromines of environmental concern, and calibration curves were created, which show LODs below 0.3 mM for all tested compounds and good linearity between 0.2 and 20 mM (R2 > 0.99). The relative standard deviation of the peak areas varied between 10.47 and 1.06% with an average of 3.67%. The universal character of XRF was shown via flow injection analysis, allowing the use of element-based calibration curves instead of compound-specific ones. This conclusion can be further extended to other elements detectable by XRF. Sensitivity is currently a limitation but can be further improved through multidetector setups, improved acquisition hardware and software, and techniques such as stop-flow chromatography and preconcentration. The isocratic and gradient separation of brominated species was also performed to illustrate the potential of HPLC-XRF in separation studies. While simulations predicted a minor influence of mobile phase composition on the response, this effect proved to be negligible under the experimental conditions.
- 24 October 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (43) , 23905-23913
The Hyphenation of High-Performance Liquid Chromatography with X-ray Fluorescence for Universal, Flow-Through, Elemental Analysis of Organobromines
Current detectors used in liquid chromatography are still lacking in what is desired of an ideal detector. One of those characteristics is the universal response. In this work, the novel use of X-ray fluorescence as a complementary, flow-through, universal detector was developed in hyphenation with reversed-phase chromatography. Monte Carlo simulations were performed to aid in the creation of the HPLC-XRF setup and study the influence of parameters involved. A proof of principle was established for the analysis of organobromines of environmental concern, and calibration curves were created, which show LODs below 0.3 mM for all tested compounds and good linearity between 0.2 and 20 mM (R2 > 0.99). The relative standard deviation of the peak areas varied between 10.47 and 1.06% with an average of 3.67%. The universal character of XRF was shown via flow injection analysis, allowing the use of element-based calibration curves instead of compound-specific ones. This conclusion can be further extended to other elements detectable by XRF. Sensitivity is currently a limitation but can be further improved through multidetector setups, improved acquisition hardware and software, and techniques such as stop-flow chromatography and preconcentration. The isocratic and gradient separation of brominated species was also performed to illustrate the potential of HPLC-XRF in separation studies. While simulations predicted a minor influence of mobile phase composition on the response, this effect proved to be negligible under the experimental conditions.
- 22 November 2024
- Published by American Chemical Society (ACS) in ACS Earth and Space Chemistry
- Vol. 8 (12) , 2546-2556
Determination of Rare Earth Elements in Cosmo-geological Samples Aided by Wavelength Dispersive X-ray Fluorescence Spectroscopy
- 22 November 2024
- Published by American Chemical Society (ACS) in ACS Earth and Space Chemistry
- Vol. 8 (12) , 2546-2556
Determination of Rare Earth Elements in Cosmo-geological Samples Aided by Wavelength Dispersive X-ray Fluorescence Spectroscopy
- Open Access
- 25 September 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (5) , 1514-1527
Energy-dispersive Laue diffraction analysis of the influence of statherin and histatin on the crystallographic texture during human dental enamel demineralization
Energy-dispersive Laue diffraction (EDLD) is a powerful method to obtain position-resolved texture information in inhomogeneous biological samples without the need for sample rotation. This study employs EDLD texture scanning to investigate the impact of two salivary peptides, statherin (STN) and histatin-1 (HTN) 21 N-terminal peptides (STN21 and HTN21), on the crystallographic structure of dental enamel. These proteins are known to play crucial roles in dental caries progression. Three healthy incisors were randomly assigned to three groups: artificially demineralized, demineralized after HTN21 peptide pre-treatment and demineralized after STN21 peptide pre-treatment. To understand the micro-scale structure of the enamel, each specimen was scanned from the enamel surface to a depth of 250 µm using microbeam EDLD. Via the use of a white beam and a pixelated detector, where each pixel functions as a spectrometer, pole figures were obtained in a single exposure at each measurement point. The results revealed distinct orientations of hydroxyapatite crystallites and notable texture variation in the peptide-treated demineralized samples compared with the demineralized control. Specifically, the peptide-treated demineralized samples exhibited up to three orientation populations, in contrast to the demineralized control which displayed only a single orientation population. The texture index of the demineralized control (2.00 ± 0.21) was found to be lower than that of either the STN21 (2.32 ± 0.20) or the HTN21 (2.90 ± 0.46) treated samples. Hence, texture scanning with EDLD gives new insights into dental enamel crystallite orientation and links the present understanding of enamel demineralization to the underlying crystalline texture. For the first time, the feasibility of EDLD texture measurements for quantitative texture evaluation in demineralized dental enamel samples is demonstrated.
- 25 September 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (5) , 1514-1527
Open AccessEnergy-dispersive Laue diffraction analysis of the influence of statherin and histatin on the crystallographic texture during human dental enamel demineralization
Energy-dispersive Laue diffraction (EDLD) is a powerful method to obtain position-resolved texture information in inhomogeneous biological samples without the need for sample rotation. This study employs EDLD texture scanning to investigate the impact of two salivary peptides, statherin (STN) and histatin-1 (HTN) 21 N-terminal peptides (STN21 and HTN21), on the crystallographic structure of dental enamel. These proteins are known to play crucial roles in dental caries progression. Three healthy incisors were randomly assigned to three groups: artificially demineralized, demineralized after HTN21 peptide pre-treatment and demineralized after STN21 peptide pre-treatment. To understand the micro-scale structure of the enamel, each specimen was scanned from the enamel surface to a depth of 250 µm using microbeam EDLD. Via the use of a white beam and a pixelated detector, where each pixel functions as a spectrometer, pole figures were obtained in a single exposure at each measurement point. The results revealed distinct orientations of hydroxyapatite crystallites and notable texture variation in the peptide-treated demineralized samples compared with the demineralized control. Specifically, the peptide-treated demineralized samples exhibited up to three orientation populations, in contrast to the demineralized control which displayed only a single orientation population. The texture index of the demineralized control (2.00 ± 0.21) was found to be lower than that of either the STN21 (2.32 ± 0.20) or the HTN21 (2.90 ± 0.46) treated samples. Hence, texture scanning with EDLD gives new insights into dental enamel crystallite orientation and links the present understanding of enamel demineralization to the underlying crystalline texture. For the first time, the feasibility of EDLD texture measurements for quantitative texture evaluation in demineralized dental enamel samples is demonstrated.
- Open Access
- 8 April 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (15) , 10723-10734
From Gel to Crystal: Mechanism of HfO2 and ZrO2 Nanocrystal Synthesis in Benzyl Alcohol
Nonaqueous sol-gel syntheses have been used to make many types of metal oxide nanocrystals. According to the current paradigm, nonaqueous syntheses have slow kinetics, thus favoring the thermodynamic (crystalline) product. Here we investigate the synthesis of hafnium (and zirconium) oxide nanocrystals from the metal chloride in benzyl alcohol. We follow the transition from precursor to nanocrystal through a combination of rheology, EXAFS, NMR, TEM, and X-ray total scattering (PDF analysis). Upon dissolving the metal chloride precursor, the exchange of chloride ligands for benzylalkoxide liberates HCl. The latter catalyzes the etherification of benzyl alcohol, eliminating water. During the temperature ramp to the reaction temperature (220 °C), sufficient water is produced to turn the reaction mixture into a macroscopic gel. Rheological analysis shows a network consisting of strong interactions with temperature-dependent restructuring. After a few minutes at the reaction temperature, crystalline particles emerge from the gel, and nucleation and growth are complete after 30 min. In contrast, 4 h are required to obtain the highest isolated yield, which we attribute to the slow in situ formation of water (the extraction solvent). We used our mechanistic insights to optimize the synthesis, achieving high isolated yields with a reduced reaction time. Our results oppose the idea that nonaqueous sol-gel syntheses necessarily form crystalline products in one step, without a transient, amorphous gel state.
- 8 April 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (15) , 10723-10734
Open AccessFrom Gel to Crystal: Mechanism of HfO2 and ZrO2 Nanocrystal Synthesis in Benzyl Alcohol
Nonaqueous sol-gel syntheses have been used to make many types of metal oxide nanocrystals. According to the current paradigm, nonaqueous syntheses have slow kinetics, thus favoring the thermodynamic (crystalline) product. Here we investigate the synthesis of hafnium (and zirconium) oxide nanocrystals from the metal chloride in benzyl alcohol. We follow the transition from precursor to nanocrystal through a combination of rheology, EXAFS, NMR, TEM, and X-ray total scattering (PDF analysis). Upon dissolving the metal chloride precursor, the exchange of chloride ligands for benzylalkoxide liberates HCl. The latter catalyzes the etherification of benzyl alcohol, eliminating water. During the temperature ramp to the reaction temperature (220 °C), sufficient water is produced to turn the reaction mixture into a macroscopic gel. Rheological analysis shows a network consisting of strong interactions with temperature-dependent restructuring. After a few minutes at the reaction temperature, crystalline particles emerge from the gel, and nucleation and growth are complete after 30 min. In contrast, 4 h are required to obtain the highest isolated yield, which we attribute to the slow in situ formation of water (the extraction solvent). We used our mechanistic insights to optimize the synthesis, achieving high isolated yields with a reduced reaction time. Our results oppose the idea that nonaqueous sol-gel syntheses necessarily form crystalline products in one step, without a transient, amorphous gel state.
- Open Access
- 12 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
From Gel to Crystal: Mechanism of HfO2 and ZrO2 Nanocrystal Synthesis in Benzyl Alcohol
Nonaqueous sol-gel syntheses have been used to make many types of metal oxide nanocrystals. According to the current paradigm, nonaqueous syntheses have slow kinetics, thus favoring the thermodynamic (crystalline) product. Here we investigate the synthesis of hafnium (and zirconium) oxide nanocrystals from the metal chloride in benzyl alcohol. We follow the transition from precursor to nanocrystal through a combination of rheology, EXAFS, NMR, TEM and X-ray total scattering (PDF analysis). Upon dissolving the metal chloride precursor, the exchange of chloride ligands for benzylalkoxide liberates HCl. The latter catalyzes the etherification of benzyl alcohol, eliminating water. During the temperature ramp to the reaction temperature (220 °C), sufficient water is produced to turn the reaction mixture into a macroscopic gel. Rheological analysis shows a network consisting of strong interactions with temperature dependent restructuring. After a few minutes at the reaction temperature, crystalline particles emerge from the gel, and nucleation and growth are complete after 30 minutes. In contrast, four hours are required to obtain the highest isolated yield, which we attribute to the slow in situ formation of water (the extraction solvent). We used our mechanistic insights to optimize the synthesis, achieving high yields with a reduced reaction time. In summation, our results oppose the idea that nonaqueous sol-gel syntheses necessarily form crystalline products slowly, without a transient gel state.
- 12 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFrom Gel to Crystal: Mechanism of HfO2 and ZrO2 Nanocrystal Synthesis in Benzyl Alcohol
Nonaqueous sol-gel syntheses have been used to make many types of metal oxide nanocrystals. According to the current paradigm, nonaqueous syntheses have slow kinetics, thus favoring the thermodynamic (crystalline) product. Here we investigate the synthesis of hafnium (and zirconium) oxide nanocrystals from the metal chloride in benzyl alcohol. We follow the transition from precursor to nanocrystal through a combination of rheology, EXAFS, NMR, TEM and X-ray total scattering (PDF analysis). Upon dissolving the metal chloride precursor, the exchange of chloride ligands for benzylalkoxide liberates HCl. The latter catalyzes the etherification of benzyl alcohol, eliminating water. During the temperature ramp to the reaction temperature (220 °C), sufficient water is produced to turn the reaction mixture into a macroscopic gel. Rheological analysis shows a network consisting of strong interactions with temperature dependent restructuring. After a few minutes at the reaction temperature, crystalline particles emerge from the gel, and nucleation and growth are complete after 30 minutes. In contrast, four hours are required to obtain the highest isolated yield, which we attribute to the slow in situ formation of water (the extraction solvent). We used our mechanistic insights to optimize the synthesis, achieving high yields with a reduced reaction time. In summation, our results oppose the idea that nonaqueous sol-gel syntheses necessarily form crystalline products slowly, without a transient gel state.
- 3 January 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 39 (2) , 310-329
A review of laboratory, commercially available, and facility based wavelength dispersive X-ray fluorescence spectrometers
Wavelength dispersive X-ray fluorescence (WD-XRF) spectroscopy is a widely used instrumental spectroscopy method for a variety of samples.
- 3 January 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 39 (2) , 310-329
A review of laboratory, commercially available, and facility based wavelength dispersive X-ray fluorescence spectrometers
Wavelength dispersive X-ray fluorescence (WD-XRF) spectroscopy is a widely used instrumental spectroscopy method for a variety of samples.
- Top Cited Papers
- 24 February 2023
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 379 (6634) , 787-+
Formation and evolution of carbonaceous asteroid Ryugu: Direct evidence from returned samples
Samples of the carbonaceous asteroid Ryugu were brought to Earth by the Hayabusa2 spacecraft. We analyzed 17 Ryugu samples measuring 1 to 8 millimeters. Carbon dioxide–bearing water inclusions are present within a pyrrhotite crystal, indicating that Ryugu’s parent asteroid formed in the outer Solar System. The samples contain low abundances of materials that formed at high temperatures, such as chondrules and calcium- and aluminum-rich inclusions. The samples are rich in phyllosilicates and carbonates, which formed through aqueous alteration reactions at low temperature, high pH, and water/rock ratios of <1 (by mass). Less altered fragments contain olivine, pyroxene, amorphous silicates, calcite, and phosphide. Numerical simulations, based on the mineralogical and physical properties of the samples, indicate that Ryugu’s parent body formed ~2 million years after the beginning of Solar System formation.
- 24 February 2023
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 379 (6634) , 787-+
Top Cited PapersFormation and evolution of carbonaceous asteroid Ryugu: Direct evidence from returned samples
Samples of the carbonaceous asteroid Ryugu were brought to Earth by the Hayabusa2 spacecraft. We analyzed 17 Ryugu samples measuring 1 to 8 millimeters. Carbon dioxide–bearing water inclusions are present within a pyrrhotite crystal, indicating that Ryugu’s parent asteroid formed in the outer Solar System. The samples contain low abundances of materials that formed at high temperatures, such as chondrules and calcium- and aluminum-rich inclusions. The samples are rich in phyllosilicates and carbonates, which formed through aqueous alteration reactions at low temperature, high pH, and water/rock ratios of <1 (by mass). Less altered fragments contain olivine, pyroxene, amorphous silicates, calcite, and phosphide. Numerical simulations, based on the mineralogical and physical properties of the samples, indicate that Ryugu’s parent body formed ~2 million years after the beginning of Solar System formation.